All Category

Fixed Terminal Blocks

View : Grid List
Filter

20 Item(s)

Set Ascending Direction
  1. BD Series Terminal Block Fixed Terminal Block Type
    IDEC BD Series Terminal Block Fixed Terminal Block Type
    Rating of Suitable Cable  1.25mm2  Withstand Voltage (V/min)  AC2500  Color  Black  Terminal Screw  M3  Insulation Resistance (MΩ)  over 100  Terminal Connection  screw 
    Rating:
    89%
    from S$3.09
    Min. 2 days
  2. BTB / BTBH series fixed terminal block (touch-down structure type)
    IDEC BTB / BTBH series fixed terminal block (touch-down structure type)
    A strong fixed terminal block with 2 to 30 poles. Equipped with a touchdown type that saves wiring man-hours.
    Operation Ambient Temperature (℃)  -25 to +55 (no icing)  Storage Temperature Range (℃)  -25 to +70 (no icing)  Relative Humidity  45% to 85% (with no condensation)  Withstand Voltage (V/min)  AC2500  Type of Sign  Direct attachment  Type  Touch-down type  Insulation Resistance (MΩ)  over 100  Terminal Connection  screw 
    Rating:
    98%
    from S$4.59
    Min. 2 days
  3. BTB / BTBH Series Fixed Terminal Block (Self-up Type)
    IDEC BTB / BTBH Series Fixed Terminal Block (Self-up Type)
    Operation Ambient Temperature (℃)  -25 to +55 (no icing)  Storage Temperature Range (℃)  -25 to +70 (no icing)  Relative Humidity  45% to 85% (with no condensation)  Withstand Voltage (V/min)  AC2500  Type of Sign  Direct attachment  Type  Self-up type  Insulation Resistance (MΩ)  over 100  Terminal Connection  screw 
    Rating:
    93%
    from S$8.99
    Min. 2 days
  4. TBF Fixed Terminal Block (Economic Type)
    NITTO KOGYO TBF Fixed Terminal Block (Economic Type)
    Since it has the same pitch and height as the breaker terminals, it is easy to connect to the breaker. (* Excluding TBF-601 to 604.) Since it fits within the same width as the breaker, it can also be installed in close contact with the breaker. For both screw fixing and IEC rail mounting * When u... Read More
    Rated Insulation Voltage (V)  600  Type of Sign  DIN rail / Direct mounting  Specification  IEC rail mounting: Possible  Material (base)  Polycarbonate resin  Terminal Connection  screw 
    Rating:
    95%
    from S$17.99
    Min. 2 days
  5. TBE Fixed Terminal Block (Economical)
    NITTO KOGYO TBE Fixed Terminal Block (Economical)
    The A type is a type in which each terminal from 2P to 16P and the fixed parts at both ends are integrally molded. B type is a type in which 1P units are stacked and fixed parts are provided at both ends. * Please note that the customer will be responsible for any in-house shipping charges for th... Read More
    Type of Sign  Direct attachment  Specification  IEC rail mounting: Not possible  Terminal Connection  screw 
    Rating:
    83%
    from S$3.29
    Min. 2 days
  6. Fixed Terminal Block TS-615 Type
    Kimura Electric Fixed Terminal Block TS-615 Type
    Ideal for power supply circuits and operation circuits of switchboards, control panels, various electrical equipment, etc. The terminal block body and terminal cover are flame-retardant grade UL94V-0, so it is safe. Since the rated insulation voltage is 660V, it is ideal for high withstand voltag... Read More
    Operating Temperature Range (℃)  -10~50  Recommended Screw Tightening Torque (Nm [kgfcm])  0.6~0.9  RoHS directive (corresponding to 10 substances)  Rated Carrying Current (A)  15  Rated Insulation Voltage (V)  660  Terminal Spacing (mm)  Terminal Screw  M3×8 self-up type  Conformed Standard  NECA4201 terminal block  Compatible cable (mm2 Up to 2 
    Rating:
    65%
    from S$1.99
    Min. 2 days
  7. Fixed Terminal Block TS-625 Type
    Kimura Electric Fixed Terminal Block TS-625 Type
    * When mounting the terminal block on the panel, use a flat washer for the mounting screw.
    Operating Temperature Range (℃)  -10~50  RoHS directive (corresponding to 10 substances)  Recommended Screw Tightening Torque (Nm [kgfcm])  1.4~1.8  Terminal Spacing (mm)  12.5  Rated Carrying Current (A)  30  Compatible cable (mm2 5.5  Rated Insulation Voltage (V)  660  Terminal Screw  M4 × 8 self-up type  Conformed Standard  NECA4201 terminal block 
    Rating:
    80%
    from S$2.59
    Min. 2 days
  8. TBT Fixed Two Stage Terminal Block
    NITTO KOGYO TBT Fixed Two Stage Terminal Block
    RoHS directive (corresponding to 10 substances)  Rated Carrying Current (A)  20  Rating of Suitable Cable  2mm2  Rated Insulation Voltage (V)  600  Terminal Spacing (mm)  Type of Sign  Direct attachment  Specification  IEC rail mounting: Not possible  Terminal Screw  M3.5  Material (base)  Polycarbonate resin  Type  Wire clamp terminal  Terminal Connection  screw 
    Rating:
    80%
    from S$43.99
    Min. 2 days
  9. TBZ Fixed breaker terminal block (Direct clamping terminal type)
    NITTO KOGYO TBZ Fixed breaker terminal block (Direct clamping terminal type)
    You can tighten the wires directly. Comes with a transparent terminal cover that shows the tightened state. Please use it for temporary construction and experimental boards. * E has a ground terminal.
    Included Accessories  Joint bar, mounting screw, wood screw  Rated Insulation Voltage (V)  600  Terminal Connection  screw  Type of Sign  DIN rail / Direct mounting 
    Rating:
    20%
    from S$149.90
    Min. 7 days
  10. TBP fixed power terminal block
    NITTO KOGYO TBP fixed power terminal block
    It is a kind of heat resistant type and can be used for explosion proof. * When using the product above 55 ° C, remove the terminal cover and name plate. * Please order the sealing screws and metal fittings separately. (TBP100-TBP600 only) * Use small crimp terminals for TBP-801, 802, 803, and 80... Read More
    Operation Ambient Temperature (℃)  -20~90  Rated Insulation Voltage (V)  600  Heat resistance classification  A kind of heat-resistant type  Type of Sign  Direct attachment  Specification  IEC rail mounting: Not possible  Material (base)  Polyester resin  Terminal Connection  screw 
    Rating:
    100%
    from S$24.99
    Min. 7 days
  11. Terminal block for TBF fixed breaker
    NITTO KOGYO Terminal block for TBF fixed breaker
    You can connect directly to the breaker. * When connecting a 250 mm 2 wire, order a small crimp terminal and an insulating barrier. * E has a ground terminal. * The ground terminal does not come with a terminal cover, but if necessary, please order it separately. * When connecting a 400AF breaker... Read More
    Material (base)  Polycarbonate resin  Terminal Connection  screw  Rated Insulation Voltage (V)  600  Type of Sign  DIN rail / Direct mounting  Specification  IEC rail mounting: Possible 
    from S$19.99
    Min. 7 days
  12. TBJ fixed branch terminal block
    NITTO KOGYO TBJ fixed branch terminal block
    It is a kind of heat resistant type and can be used for explosion proof. For connecting and branching power lines by storing in primary and secondary feed terminals, pull boxes, junction boxes, etc. of distribution boards and control boards. * When using the product above 55 ° C, remove the termi... Read More
    Operation Ambient Temperature (℃)  -20~90  Rated Insulation Voltage (V)  600  Heat resistance classification  A kind of heat-resistant terminal block  Structure  Combination type  Type of Sign  Direct attachment  Specification  IEC rail mounting: Not possible  Material (base)  Unsaturated polyester resin  Terminal Connection  screw 
    from S$129.90
    Min. 7 days
  13. UDJ Jumper for Single Pole Distribution Block
    nVent UDJ Jumper for Single Pole Distribution Block
    You can use jumpers to increase the number of outputs. Obtained HL3 for R23 and HL2 for R22, and is compliant with EN45545.
    from S$2,299.00
    Min. 33 days
  14. Power Block
    nVent Power Block
    It can be connected to a general cable or nVent ERIFLEX Flexibar Advanced or IBS / IBSB Advanced Insulated Braided Conductor. It is small and can handle large currents. Cables and aluminum wires can be connected directly or by ferrule mounting. The screw holding cover is removable. The co... Read More
    from S$1,699.00
    Min. 33 days
  15. Single Pole Distribution Block
    nVent Single Pole Distribution Block
    Cables or aluminum wires can be connected directly or by ferrule. The screw holding cover is removable. The connection with the cable can be confirmed from the outside. Panel mountable with DIN rail or screws. RoHS compliant Obtained HL3 for R23 and HL2 for R22, and EN45545 compliant halogen-free
    from S$1,699.00
    Min. 33 days
  16. Quick connection ground terminal block  4P
    Panasonic Quick connection ground terminal block 4P
    Number of Poles  4P  Type  Quick connection ground terminal block  Model Name  With ELB ground terminal 
    from S$19.99
    Min. 6 days
  17. UD-400J Jumper for Single Pole Distribution Block
    nVent UD-400J Jumper for Single Pole Distribution Block
    Up to three UD-400A-212 copper or aluminum unipolar power distribution blocks can be connected in parallel. You can increase the number of inputs and outputs up to 3 times. Ideal for current collectors from solar panels. Obtained HL3 for R23 and HL2 for R22, and is compliant with EN45545.
    from S$1,699.00
    Min. 33 days
  18. BDJ1 series
    IDEC BDJ1 series
    Specification  Transition bracket 
    Discontinued
  19. BT series
    IDEC BT series
    Specification  Bare crimp terminal 
    Discontinued
  20. BTB / BTBH series fixed terminal block
    IDEC BTB / BTBH series fixed terminal block
    Discontinued
View : Grid List
Filter

20 Item(s)

Set Ascending Direction