All Category

Tools for Connector

View : Grid List
Filter

Items 1 - 40 of 912

Set Ascending Direction
  1. Aluminum bar RS Pro rod
    RS Pro Aluminum bar RS Pro rod
    RoHS directive (corresponding to 10 substances) 
    from S$43.99
    Min. 4 days
  2. Extraction Tool
    Molex Extraction Tool
    Thickness (mm) 
    Rating:
    89%
    from S$59.99
    Min. 2 days
  3. Paste Heat Sink
    Sunhayato Paste Heat Sink
    This product alone can dissipate heat in the same way as a heat sink. It has excellent thermal conductivity and can move the heat generated by the heating element to a place where it has been removed. Because it is thin and flexible, it is difficult to process and can be attached even in narrow s... Read More
    Operating Ambient Temperature (℃)  -25~120  Thickness (mm)  0.13  Operating humidity (%)  0~85  Dimension (mm)  120×250  Color  Black (surface) 
    Rating:
    85%
    from S$33.99
    Min. 2 days
  4. heatsink
    Sankyo Thermo Tech (Ryosan) heatsink
    Mounting Hole  M3 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  5. Igniter
    azbil (Yamatake Corporation) Igniter
    A solid-state high-performance ignition transformer used for commercial and industrial oil-fired gun type burners and gas-fired power burners.
    Maximum Wind Speed (m/s)  (Between electrodes) Approx. 20  Connector  (High voltage side) Yajiri terminal  Number of electrodes  Ground  1-end grounding  Power Consumption (VA)  35  Rated Power Supply Voltage  AC100(50/60Hz)  Mass (g)  About 420  Suitable Burner  Gas fired power burner  Feature  Half wave 
    Rating:
    73%
    from S$119.90
    Min. 2 days
  6. Hand Tools and Consumable Parts Torsion Spring
    Molex Hand Tools and Consumable Parts Torsion Spring
    Rating:
    80%
    from S$4.89
    Min. 2 days
  7. Nanotech Brush
    KITA Manufacturing Nanotech Brush
    Nanotech brush is an original cleaning item whose main purpose is to effectively remove solder debris that has adhered to and transferred to contact probes built into IC sockets. In addition to the above usage, it can also be used to remove burrs on the machined surface during cutting, drilling, ... Read More
    Overall Length (mm)  181  Holder Length (mm)  30  Material  SUS 
    from S$97.99
    Min. 2 days
  8. Dynamic connector extraction tool (for D3000 series)
    Tyco Electronics Japan Dynamic connector extraction tool (for D3000 series)
    Wire type A tool for pulling out contacts from tab / recess housings. * Be careful not to insert it into the contact part. If you insert it by mistake, replace the contact with a new one and use it.
    Rating:
    100%
    from S$58.99
    Min. 2 days
  9. Base pin for VH connector Top type 100 pieces
    J.S.T. Mfg. Base pin for VH connector Top type 100 pieces
    It enables a wide range of connections from signal circuits in electronic devices to power supply circuits and output circuits. 3.96mm pitch for wiring inside equipment and wire-to-board connection
    Operating Temperature Range (℃)  -25 to 85 (including temperature rise)  Insulation Resistance (MΩ)  1000 or more  Applicable Wire Range AWG (#)  22~18  Rated Voltage (V)  250  Rated Current (A)  Withstand Voltage (V/min)  AC1500  Shape  Top type 
    Rating:
    100%
    from S$25.99
    Min. 2 days
  10. RS Pro pipe bender
    RS Pro RS Pro pipe bender
    Rating:
    80%
    from S$38.99
    Min. 2 days
  11. Base pin for PH connector Top type 100 pieces
    J.S.T. Mfg. Base pin for PH connector Top type 100 pieces
    Uses highly reliable contacts with a compact design. The post with base is a box type. 2.0mm pitch for wiring inside equipment and wire-to-board connection
    Operating Temperature Range (℃)  -25 to 85 (including temperature rise)  Rated Voltage (V)  100  Insulation Resistance (MΩ)  1000 or more  Rated Current (A)  Applicable Wire Range AWG (#)  30~24  Withstand Voltage (V)  AC800 / 1 minute  Shape  Top type 
    Rating:
    80%
    from S$15.99
    Min. 2 days
  12. FIN PU series with solder mounting pins
    MIZUTANI ELECTRIC FIN PU series with solder mounting pins
    Rating:
    80%
    from S$12.99
    Min. 2 days
  13. Removal Tool HAN D
    HARTING Removal Tool HAN D
    Mass (g)  41.6  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  For HARTING D contact 
    from S$119.90
    Min. 2 days
  14. RS Pro Tool Lanyard Nylon
    RS Pro RS Pro Tool Lanyard Nylon
    from S$7.99
    Min. 2 days
  15. Low Frequency Ferrite Core
    Seiwa Electric Mfg. (SEIWA) Low Frequency Ferrite Core
    It can be fixed with the optional pedestal (E04SRMB).
    Suitable Diameter (Φmm)  (Maximum) 12  Outer Dimensions (mm)  16×12×35×33  Specification  Frequency band: low frequency 
    Rating:
    100%
    from S$489.90
    Min. 5 days
  16. Base pin for PH connector Side type 100 pieces
    J.S.T. Mfg. Base pin for PH connector Side type 100 pieces
    Uses highly reliable contacts with a compact design. The post with base is a box type. 2.0mm pitch for wiring inside equipment and wire-to-board connection
    Operating Temperature Range (℃)  -25 to 85 (including temperature rise)  Rated Voltage (V)  100  Insulation Resistance (MΩ)  1000 or more  Rated Current (A)  Applicable Wire Range AWG (#)  30~24  Withstand Voltage (V)  AC800 / 1 minute  Shape  Side type 
    from S$27.99
    Min. 2 days
  17. Base pin for VH connector Top type
    J.S.T. Mfg. Base pin for VH connector Top type
    It enables a wide range of connections from signal circuits in electronic devices to power supply circuits and output circuits. 3.96mm pitch for wiring inside equipment and wire-to-board connection
    Operating Temperature Range (℃)  -25 to 85 (including temperature rise)  Insulation Resistance (MΩ)  1000 or more  Applicable Wire Range AWG (#)  22~18  Rated Voltage (V)  250  Rated Current (A)  Withstand Voltage (V/min)  AC1500  Shape  Top type 
    from S$67.99
    Min. 32 days
  18. Screwdriver bit set RS Pro 8 piece minus screwdriver bit
    RS Pro Screwdriver bit set RS Pro 8 piece minus screwdriver bit
    Rating:
    100%
    from S$8.29
    Min. 2 days
  19. Removal tool Han E
    HARTING Removal tool Han E
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  For HARTING E contacts 
    Rating:
    100%
    from S$64.99
    Min. 2 days
  20. Print ribbon
    MIBU DENKI INDUSTRIAL Print ribbon
    A heat transfer ink ribbon that is resistant to friction and features clear printing.
    Width (mm)  20  Length (m)  200 
    from S$48.99
    Min. 2 days
  21. Conversion adapter STD series
    Sunhayato Conversion adapter STD series
    from S$17.99
    Min. 2 days
  22. Manual tool Consumable parts Ratchet spring
    Molex Manual tool Consumable parts Ratchet spring
    Rating:
    100%
    from S$3.09
    Min. 2 days
  23. 11 RS Pro driver sets Precision
    RS Pro 11 RS Pro driver sets Precision
    from S$32.99
    Min. 2 days
  24. RS Pro single-sided sponge tape, width: 10mm, length: 10m
    RS Pro RS Pro single-sided sponge tape, width: 10mm, length: 10m
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$38.99
    Min. 2 days
  25. RS Pro Hex wrench 3 mm
    RS Pro RS Pro Hex wrench 3 mm
    from S$2.99
    Min. 2 days
  26. Hole saw set RS Pro bimetal, 19 → 76 mm, 15 pieces
    RS Pro Hole saw set RS Pro bimetal, 19 → 76 mm, 15 pieces
    from S$299.90
    Min. 2 days
  27. RS Pro single-sided sponge tape, width: 12mm, length: 10m
    RS Pro RS Pro single-sided sponge tape, width: 12mm, length: 10m
    RoHS directive (corresponding to 10 substances) 
    from S$19.99
    Min. 2 days
  28. RS Pro PVC insulation tape Black, width: 12mm, length: 20m
    RS Pro RS Pro PVC insulation tape Black, width: 12mm, length: 20m
    RoHS directive (corresponding to 10 substances) 
    from S$3.09
    Min. 2 days
  29. Hammer RS Pro Carbon steel
    RS Pro Hammer RS Pro Carbon steel
    from S$39.99
    Min. 2 days
  30. RS Pro PVC insulation tape Black, width: 19mm, length: 20m
    RS Pro RS Pro PVC insulation tape Black, width: 19mm, length: 20m
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$3.09
    Min. 2 days
  31. RS Pro punch pliers
    RS Pro RS Pro punch pliers
    from S$25.99
    Min. 2 days
  32. Connector DF62 series removal tool
    HRS (HIROSE ELECTRIC) Connector DF62 series removal tool
    Slim relay connector for narrow space wiring Applicable crimping tool
    from S$37.99
    Min. 2 days
  33. EL contact manual tool
    J.S.T. Mfg. EL contact manual tool
    It is a convenient manual tool for connecting a very small amount of contacts for trial production and maintenance.
    Overall Length (mm)  296  Mass (g)  485 
    Rating:
    60%
    from S$699.90
    Min. 2 days
  34. RS Pro single-sided sponge tape, width: 12mm, length: 10m
    RS Pro RS Pro single-sided sponge tape, width: 12mm, length: 10m
    RoHS directive (corresponding to 10 substances) 
    from S$11.99
    Min. 2 days
  35. Base pin for VH connector Side type 100 pieces
    J.S.T. Mfg. Base pin for VH connector Side type 100 pieces
    It enables a wide range of connections from signal circuits in electronic devices to power supply circuits and output circuits. 3.96mm pitch for wiring inside equipment and wire-to-board connection
    Operating Temperature Range (℃)  -25 to 85 (including temperature rise)  Insulation Resistance (MΩ)  1000 or more  Applicable Wire Range AWG (#)  22~18  Rated Voltage (V)  250  Rated Current (A)  Withstand Voltage (V/min)  AC1500  Shape  Side type 
    from S$39.99
    Min. 2 days
  36. Removal tool Han C
    HARTING Removal tool Han C
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  For HARTING C contacts 
    from S$32.99
    Min. 2 days
  37. RS Pro single-sided sponge tape, width: 10mm, length: 10m
    RS Pro RS Pro single-sided sponge tape, width: 10mm, length: 10m
    RoHS directive (corresponding to 10 substances) 
    from S$13.99
    Min. 2 days
  38. Manual tool
    Molex Manual tool
    from S$77.99
    Min. 2 days
  39. Plane woodworking drill bit RS Pro 20mm chrome vanadium steel
    RS Pro Plane woodworking drill bit RS Pro 20mm chrome vanadium steel
    from S$9.79
    Min. 2 days
  40. RS Pro PVC insulation tape Green, yellow, width: 12mm, length: 20m
    RS Pro RS Pro PVC insulation tape Green, yellow, width: 12mm, length: 20m
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$2.79
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 912

Set Ascending Direction