All Category

Touch Switches

Other Related Pages

View : Grid List
Filter

20 Item(s)

Set Ascending Direction
  1. Touch Switch D5B
    OMRON Touch Switch D5B
    Versatile tactile switch that detects objects from multiple directions Uses a slow action switch mechanism. Gold-plated contacts for high contact reliability with a small load. Direct input to microcomputers, programmable controllers, etc. is possible. There are 3 types of small outer diameters, ... Read More
    Rating:
    70%
    from S$37.99
    Min. 2 days
  2. Touch Switch
    ASA ELECTRONICS INDUSTRY Touch Switch
    Material  (Case, nut, shaft) SUS303  Movement Differential (MD)  0.1mm or less  Protection Class  IP67 equivalent 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  3. Cylindrical touch switch D5C
    OMRON Cylindrical touch switch D5C
    Can be detected with a light touch. Moreover, it does not require a slim shape of Φ18, and can detect minute displacements, fine wires, and thin conductors (iron, stainless steel, etc.). Non-conductors can be used by indirectly connecting to ground. Since it operates at the moment of contact, the... Read More
    Sensitivity  (Setting sensitivity range) 30pF-100pF  Rated Insulation Voltage (V)  (Ui)AC1000  Operation Ambient Temperature (℃)  -25 to +70 (but no freezing)  Current Consumption (mA)  17 or less  PTI (Proof Tracking Index)  175  Pollution Degree (Environment to Use)  3(IEC947-5-1)  Ambient Humidity to Use  35~95%RH  Electric Shock Protection Class  Class Ⅱ  Switch Category  D(IEC335)  Protection Class  IP67 equivalent  Shock resistance  Up to 1000m/s2  Output Current (mA)  Up to 200 (resistive load) 
    from S$299.90
    Min. 6 days
  4. Limit type touch switch NL
    OMRON Limit type touch switch NL
    Detects with a light touch, and the light emitting diode operates at the moment of contact, so the movement of the response is extremely small and highly accurate position detection is possible. It can detect minute displacements and lightweight objects without the need for operating force. Check... Read More
    Operation Ambient Temperature (℃)  -10 to +60 (no icing)  PTI (Proof Tracking Index)  175  Shock Resistance  200m / s 2 Pollution Degree (Environment to Use)  3(IEC947-5-1)  Ambient Humidity to Use  35~95%RH  Protection class  ClassⅡ  Switch Category  D(IEC335)  Protection Class  IP60 
    from S$299.90
    Min. 15 days
  5. Flat switch
    ASA ELECTRONICS INDUSTRY Flat switch
    Movement Differential (MD)  0.1mm or less  Pretravel (PT)  0.2~0.5  Operating Force (N)  0.5  Stroke (mm)  Protection Class  IP65  Material (Shaft)  SUS303  Material (Case)  Zinc alloy die casting  Repeatability (mm)  ±0.002 
    from S$48.99
    Min. 2 days
  6. Limit type touch switch  NL  Antenna part only
    OMRON Limit type touch switch NL Antenna part only
    from S$49.99
    Min. 64 days
  7. Ball touch switch
    ASA ELECTRONICS INDUSTRY Ball touch switch
    Touch from top to side and diagonally. Detection of objects passing from the side, etc. * Do not apply more than 20N to the contact part. * Do not push the ball support from the side with a force of 10N or more. * The corner that hits the ball is preferably R0.5 or higher.
    Operation Ambient Temperature (℃)  -20 to -85 (no condensation)  Movement Differential (MD)  0.1mm or less  Pretravel (PT)  0.1~0.3mm  Operating Force (N)  1(MAX)  Stroke (mm)  1.5 (vertical direction)  Current Consumption (mA)  15(MAX)  Output Current (mA)  15(MAX)  Ambient Humidity to Use  20~95%RH  Operating Voltage  DC5~24V  Output Specifications  NPN open connector  Repeatability (mm)  ±0.002 
    from S$56.99
    Min. 4 days
  8. Cylindrical touch switch  D5C antenna only
    OMRON Cylindrical touch switch D5C antenna only
    Protection Class  IP67 equivalent  Type  Plunger antenna only  Antenna  Plunger shape 
    from S$48.99
    Min. 34 days
  9. Cylindrical touch switch D5C antenna only
    OMRON Cylindrical touch switch D5C antenna only
    Antenna  Free attachment type  Type  Free attachment type antenna only  Protection Class  IP67 equivalent 
    from S$32.99
    Min. 64 days
  10. High precision MT touch switch P10DH
    Metrol High precision MT touch switch P10DH
    Since a linear motion ball bearing is used for the bearing, it is suitable for sliding, declination, and offset.
    Discontinued
  11. Ultra compact high precision PT touch switch PT
    Metrol Ultra compact high precision PT touch switch PT
    World's smallest class high-precision touch switch M5 x 17 mm, 1 μm repeatability 3 million times durability A small sensor with M5 or Φ5 and a length of 17 mm. The repeating accuracy (range) of the operating point can be selected from 1 μm / 3 μm.
    Discontinued
  12. CS touch switch CSR
    Metrol CS touch switch CSR
    The rotary lever slides against the detector and hits the declination, and a signal is output from the internal non-contact transmitter. The stroke can be changed by the lever length, and the contact force can be lowered. (Up to 0.1N) The contact portion can be changed according to the detector.
    Differential Distance  0.05mm (Lever length 25mm)  Stroke  30°  Direction of Rotation  Clockwise (CW)  Specification  Movement until operation 5 ° or less  Contact Configuration  Non-contact type 
    Discontinued
  13. CS touch switch CS / CSJ / CSS / CSK / CSP
    Metrol CS touch switch CS / CSJ / CSS / CSK / CSP
    The code protector has been abolished and the main unit has been made more compact. (Excluding CSJ) [Good operating point accuracy] Repeatability (range) of 5 μm / 3 μm / 10 μm. Judgment mistakes due to erroneous signals and chocolate stops can be reduced. [No difference] Continuous detection of ... Read More
    Discontinued
  14. High precision MT touch switch P11 / P21
    Metrol High precision MT touch switch P11 / P21
    Suitable for low height spaces. Since it is often used for machine tools that are subject to coolant and chips, boot protection without gaps is a typical specification. Can be equipped with an air blow pipe. Contact parallelism 0.01 mm. Contact diameter can be up to Φ10 plane. There is an overrun... Read More
    Discontinued
  15. Small Magne Limit
    Panasonic Small Magne Limit
    The second version of Magne Limit, which is easier to use and smaller in size to meet market needs. For detecting the opening / closing of safety covers for production maintenance / inspection machines, etc., for detecting the opening / closing of closets and storage doors. * Please note that the... Read More
    Contact Material  AgNi contacts  Included Accessories  1 adsorption plate (AZC3801)  Contact Configuration  1c  Operating Humidity Range  85% RH or less  Color  Ash gray  Protection Class  IP40 
    Discontinued
  16. CS touch switch CSM
    Metrol CS touch switch CSM
    Mini switch. Effective for equipment in tight spaces and when miniaturization is required. The stroke is longer (1.5 mm) than the stopper mini STM with a switch. There is no stopper function. Since the waterproof type has a sealed structure, there will be a delay in returning when used at low tem... Read More
    Discontinued
  17. CS touch switch CSC
    Metrol CS touch switch CSC
    Significant cost reduction by not requiring a sequencer. The OK range can be adjusted.
    Discontinued
  18. High precision MT touch switch P08 / P10 / P12
    Metrol High precision MT touch switch P08 / P10 / P12
    [Good operating point accuracy] Repeatability of 0.5 μm / 2 μm (range) Judgment mistakes due to erroneous signals and chocolate stops can be reduced. [No difference] Continuous detection of minute displacement is possible. [No drift] There is no signal point drift due to power supply voltage and ... Read More
    Discontinued
  19. CS touch switch CSH
    Metrol CS touch switch CSH
    Since a linear bush is used for the bearing, it is suitable for sliding, declination, and offset. The switch part is a cartridge type. Replacement work can be done easily, and maintenance costs can be reduced. There is no need to worry about switch damage due to twisting of the cord when it is at... Read More
    Discontinued
  20. High precision MT touch switch P10MC
    Metrol High precision MT touch switch P10MC
    Since the contact ball rotates, it is suitable for detecting sliding parts. Since there is no difference, it can be used to determine the presence or absence of slight unevenness and the thickness of the sheet. Unlike the case of a micro switch with a difference and a proximity sensor, there is n... Read More
    Discontinued
View : Grid List
Filter

20 Item(s)

Set Ascending Direction