All Category

Signal Converters

View : Grid List
Filter

Items 1 - 40 of 679

Set Ascending Direction
  1. Clamp Type Sensors / Converter Integrated Current Converter
    U.R.D. Clamp Type Sensors / Converter Integrated Current Converter
    AC current detection / DC voltage output average value rectification type current converter dedicated to commercial power supply 50 / 60Hz. 0-5VDC measurement signal is output directly from the sensor without the need for a power supply. Clamp type sensor / converter integrated type, extremely ea... Read More
    Specification  (Output ripple) Within 5% of output  Storage Environment  -30 ℃ ~ + 90 ℃, ≤85% RH, no condensation  Screw Tightening Torque (N・M)  0.3  Allowable current  100% (continuous), 150% (1 min)  Responsiveness  300ms (typ)  Desorption times  About 100 times 
    Rating:
    93%
    from S$49.99
    Min. 2 days
  2. Clamp-type sensor / RMS converter integrated current converter
    U.R.D. Clamp-type sensor / RMS converter integrated current converter
    Commercial power supply 50 / 60Hz distortion waveform is detected by effective value. Directly output the instrumentation signal of 4-20mA DC. Clamp type sensor / converter integrated type, extremely easy to install. Supports a wide range of currents from 0 to 5A to 0 to 500A. A 2-wire transmissi... Read More
    Specification  (Output ripple) Within 5% of output  Screw Tightening Torque (N・M)  0.3  Responsiveness  100ms (typ)  Allowable current  120% (continuous), 150% (1min)  Desorption times  About 100 times  Power Supply  DC20~30V (25mA typ)  Linearity  ± 2% FS (50 / 60Hz sine wave) 
    from S$139.90
    Min. 2 days
  3. Isolator (2 outputs)
    M-SYSTEM Isolator (2 outputs)
    Unified signal isolation for instrumentation (DC insulation between input and output). Can be closely attached. Application example ... Insulation between panel instruments, computer systems, and field equipment Insulation between telemeter systems and input equipment For impedance conversion whe... Read More
    Input Signal  A: 4-20mA DC (input resistance 250Ω)  Classification of the Hazardous  Non-dangerous goods 
    from S$459.90
    Min. 2 days
  4. Ultra thin signal converter K3FP series
    OMRON Ultra thin signal converter K3FP series
    Material (Housing)  PBT 
    Rating:
    100%
    from S$389.90
    Min. 5 days
  5. Isolator
    M-SYSTEM Isolator
    Unified signal isolation for instrumentation (DC insulation between input and output) Can be closely attached
    Power supply  100V AC  Output Signal  4-20mA DC (load resistance 750Ω or less)  Input Signal  A: 4-20mA DC (input resistance 250Ω) 
    Rating:
    100%
    from S$299.90
    Min. 2 days
  6. Distributor converter
    M-SYSTEM Distributor converter
    Power supply for 2-wire transmitter of 4 to 20mA DC. Available in 24V DC and 42V DC voltage. Insulation between signal and power supply. With a short-circuit protection circuit on the transmitter side. Compatible with smart transmitters. Can be closely attached.
    Power supply  100V AC  Classification of the Hazardous  Non-dangerous goods 
    from S$199.90
    Min. 2 days
  7. Isolator
    M-SYSTEM Isolator
    Unified signal isolation for instrumentation (DC insulation between input and output). Can be closely attached. Application example ... Insulation between panel instruments, computer systems, and field equipment Insulation between telemeter systems and input equipment For impedance conversion whe... Read More
    Classification of the Hazardous  Non-dangerous goods 
    from S$459.90
    Min. 2 days
  8. Distributor converter
    M-SYSTEM Distributor converter
    Converter for analog 2-wire transmitter. With input short circuit protection circuit. Compatible with smart transmitters. World power supply is available. Can be closely attached. Application example: Used in combination with a 2-wire transmitter
    Classification of the Hazardous  Non-dangerous goods 
    from S$489.90
    Min. 5 days
  9. Distributor converter
    M-SYSTEM Distributor converter
    Power is supplied to a 2-wire transmitter (output signal: 4 to 20mA DC), and the transmission signal is converted into an insulated DC signal. Compatible with smart transmitters. Compact terminal block structure. Can be closely attached. Equipped with power indicator LED.
    Output Signal  4-20mA DC (load resistance 550Ω or less) 
    from S$439.90
    Min. 2 days
  10. DC input converter
    M-SYSTEM DC input converter
    A converter with a compact plug-in structure that inputs a DC signal. A DC signal is converted into a unified signal by an analog circuit. High-speed response type is available. World power supply is available. Can be closely attached. Application example ... Insulate between the panel and field ... Read More
    from S$569.90
    Min. 5 days
  11. Isolation converter (isolator)
    Watanabe Electric Isolation converter (isolator)
    RoHS directive (corresponding to 10 substances)  CE-compatible product  Yes 
    from S$299.90
    Min. 8 days
  12. Multi-range insulation converter
    Watanabe Electric Multi-range insulation converter
    RoHS directive (corresponding to 10 substances)  1st input signal  DC current / voltage  1st output signal  DC current / voltage 
    from S$229.90
    Min. 8 days
  13. K3SC RS-232C to RS-485 Communication Converter
    OMRON K3SC RS-232C to RS-485 Communication Converter
    Vibration Resistance  Shock Resistance (m/s2
    from S$389.90
    Min. 3 days
  14. High speed isolator
    Watanabe Electric High speed isolator
    RoHS directive (corresponding to 10 substances)  CE-compatible product  Yes 
    from S$679.90
    Min. 8 days
  15. Optical isolator, transistor, photovoltaic output
    TOSHIBA Optical isolator, transistor, photovoltaic output
    from S$0.89
    Min. 3 days
  16. 2-output pulse isolator (with sensor power supply)
    Watanabe Electric 2-output pulse isolator (with sensor power supply)
    RoHS directive (corresponding to 10 substances)  Input Signal  Voltage pulse or ON-OFF pulse 
    from S$389.90
    Min. 8 days
  17. Distributor converter
    M-SYSTEM Distributor converter
    Classification of the Hazardous  Non-dangerous goods 
    from S$389.90
    Min. 2 days
  18. DC input converter
    M-SYSTEM DC input converter
    A converter with a compact terminal block structure that inputs a DC signal. A DC signal is converted into a unified signal by an analog circuit. Can be closely attached. Equipped with power indicator LED.
    from S$389.90
    Min. 5 days
  19. Distributor
    Watanabe Electric Distributor
    from S$199.90
    Min. 8 days
  20. Ink pad
    azbil (Yamatake Corporation) Ink pad
    from S$37.99
    Min. 27 days
  21. Isolator (photocoupler)
    TOSHIBA Isolator (photocoupler)
    from S$3.89
    Min. 2 days
  22. Load cell converter
    Watanabe Electric Load cell converter
    RoHS directive (corresponding to 10 substances)  CE-compatible product  None 
    from S$399.90
    Min. 8 days
  23. Isolation converter
    Watanabe Electric Isolation converter
    from S$399.90
    Min. 13 days
  24. DC signal converter
    MTT DC signal converter
    Insulated 1-output / 2-output DC signal converter with a thin plug-in structure that converts a DC current signal or voltage signal into various DC signals. DC signal converter (isolator).
    Fuse  (Power) 160mA fuse  Storage Temperature (℃)  -10~60  Screw Tightening Torque (N・M)  0.8~1  Type of Sign  Wall mounting, DIN rail mounting shared  Temperature Characteristics  Within ± 0.2% of span for 10 ° C change 
    from S$489.90
    Min. 6 days
  25. DC input converter
    M-SYSTEM DC input converter
    A DC signal is converted into a unified signal by an analog circuit. DC insulation between input and output. Input / output withstand voltage 2000V AC high-speed response type (approx. 25ms) is available. Can be closely attached.
    Input Signal  0-10V DC (input resistance 1MΩ or more)  Power supply  100V AC  Output Signal  4-20mA DC (load resistance 750Ω or less)  Classification of the Hazardous  Non-dangerous goods 
    from S$389.90
    Min. 2 days
  26. CT converter
    M-SYSTEM CT converter
    Insulates AC current of 0 to 5A or 0 to 1A unified by CT. Converted to a DC signal. Adopts a true effective value calculation circuit method. Compact terminal block structure. Can be closely attached. Equipped with power indicator LED.
    Input Signal  0 to 5A AC (input loss 0.5VA or less)  Classification of the Hazardous  Non-dangerous goods 
    from S$489.90
    Min. 5 days
  27. Input isolator
    M-SYSTEM Input isolator
    Converts a high-level DC input signal into two mutually isolated DC signals. A base for multiple mounting that combines maintainability and high-density mounting is available.
    Classification of the Hazardous  Non-dangerous goods 
    from S$329.90
    Min. 5 days
  28. RTD temperature converter (response 25ms) WSP-RTS-F
    Watanabe Electric RTD temperature converter (response 25ms) WSP-RTS-F
    RoHS directive (corresponding to 10 substances) 
    from S$589.90
    Min. 8 days
  29. Potentiometer converter
    Watanabe Electric Potentiometer converter
    RoHS directive (corresponding to 10 substances) 
    from S$399.90
    Min. 8 days
  30. Isolator
    MTT Isolator
    A terminal block type isolated 1-output DC signal converter (isolator) that converts a DC current signal or voltage signal into various DC signals.
    Fuse  (Power) 250mA fuse  Storage Temperature (℃)  -10~60  Screw Tightening Torque (N・M)  0.8~1  Outer dimensions, Width W x Height H x Depth D (mm)  25×94×40  Mass (g)  90 or less  Power supply  DC24  Allowable Voltage Range (V)  DC24±10%  Type of Sign  DIN rail mounting  Temperature Characteristics  Within ± 0.2% of span for 10 ° C change 
    from S$389.90
    Min. 6 days
  31. Distributor converter
    M-SYSTEM Distributor converter
    Converter for analog 2-wire transmitter. With input short circuit protection circuit. Compatible with smart transmitters. World power supply is available. Can be closely attached. Application example: Used in combination with 2-wire transmitters from various companies
    Input Signal  Nominal 24V DC
    4-20mA DC 
    Classification of the Hazardous  Non-dangerous goods 
    from S$859.90
    Min. 5 days
  32. AC current converter
    Watanabe Electric AC current converter
    RoHS directive (corresponding to 10 substances)  Response Speed  Approx. 700 ms (0 to 90%) 
    from S$399.90
    Min. 13 days
  33. Isolation converter (isolator) WSP-DS-13
    Watanabe Electric Isolation converter (isolator) WSP-DS-13
    RoHS directive (corresponding to 10 substances)  Input Signal  DC0~5V 
    from S$469.90
    Min. 8 days
  34. Digital alarm
    M-SYSTEM Digital alarm
    Plug-in type 4-point alarm (2 points are also available). Actual amount can be displayed and set. Hysteresis width can be changed. On-delay timer. Upper and lower limits can be set. Can be set with the front key. The set value can be locked with a soft key. Contact on or off can be selected at th... Read More
    Classification of the Hazardous  Non-dangerous goods 
    from S$979.90
    Min. 5 days
  35. DC input converter (2 outputs)
    M-SYSTEM DC input converter (2 outputs)
    A converter with a compact plug-in structure that inputs a DC signal. A DC signal is converted into a unified signal by an analog circuit. High-speed response type is available. World power supply is available. Can be closely attached. Application example: Insulate between the panel and field equ... Read More
    Classification of the Hazardous  Non-dangerous goods 
    from S$779.90
    Min. 2 days
  36. Micro signal isolation converter
    Watanabe Electric Micro signal isolation converter
    RoHS directive (corresponding to 10 substances)  CE-compatible product  None 
    from S$399.90
    Min. 8 days
  37. Sensor / converter integrated current converter
    U.R.D. Sensor / converter integrated current converter
    AC current detection / DC voltage output average value rectification type current converter. High reliability with integrated sensor / converter structure. No external attached circuit is required. Insulation measurement is possible. Excellent linearity in the range of 1: 100 or more.
    Output Voltage  0 to 5VDC / 0 to rated current  Screw Tightening Torque (N・M)  0.7  Output Terminal  2.8 X 0.5 X 5L terminal  Mass (g)  60 
    from S$97.99
    Min. 7 days
  38. Isolation converter (isolator)
    Watanabe Electric Isolation converter (isolator)
    RoHS directive (corresponding to 10 substances) 
    from S$389.90
    Min. 8 days
  39. Distributor converter
    M-SYSTEM Distributor converter
    Power is supplied to a 2-wire transmitter (output signal: 4 to 20mA DC), and the transmission signal is converted into an insulated DC signal. Compact terminal block structure. Can be closely attached.
    Classification of the Hazardous  Non-dangerous goods 
    from S$489.90
    Min. 5 days
  40. AC voltage converter
    Watanabe Electric AC voltage converter
    RoHS directive (corresponding to 10 substances)  Response Speed  Approx. 700 ms (0 to 90%) 
    from S$399.90
    Min. 8 days
View : Grid List
Filter

Items 1 - 40 of 679

Set Ascending Direction