All Category

Solder Pots

A solder bath is a tool that is used to melt solder in a bath. Solder can be easily attached by inserting lead wires into the melted solder. It is possible to control the solder temperature by moving the knob on the main unit or by digital setting. This tool is used at the manufacturing site of electronic parts and electrical machines. The solder in the solder bath will change in quality if it is heated for a long time, so it is a good idea to scoop out or replace the dross regularly.
View : Grid List
Filter

25 Item(s)

Set Ascending Direction
  1. Solder Pot
    goot (TAIYO ELECTRIC) Solder Pot
    Since the temperature can be set freely with the volume, it is possible to work in the optimum state. Zero cross control (proportional to time) significantly reduces output noise. The LED lamp lights up when the heater is energized. With scrap removal squeegee Pre-solder for lead wires.
    Temperature (℃)  (Point) 270-530  Rated Voltage  100V AC 50/60Hz  Power Consumption (W)  130  Dissolved Solder Amount (g)  About 300  Heater  Nichrome heater  Type of Control  Time proportional control method 
    Rating:
    90%
    from S$229.90
    Min. 2 days
  2. Lead-free analog solder bath (static type)
    HAKKO Lead-free analog solder bath (static type)
    Ideal for soldering small boards and modifying boards. You can easily replace the tank just by loosening the screws. You can use it in a variety of ways, such as changing the tank depending on the type of solder, or using different sizes of tanks (50 square and 75 square) for one main unit. The r... Read More
    Outer dimensions, Width W x Height H x Depth D (mm)  143×100×220  Control Temperature (℃)  200 to 450 (when using a 50 square tank)  Power Consumption (W)  195  Power Input (AC100V)  50/60Hz  Trusco Part No.  835-6872  Bay Dimensions (mm)  50×42×50 
    Rating:
    100%
    from S$479.90
    Min. 2 days
  3. Lead-free Digital Solder Bath (Static Type)
    HAKKO Lead-free Digital Solder Bath (Static Type)
    Parameters can be set according to the type of solder. With long-life special coated solder tank. The digital display ensures temperature control and achieves high temperature accuracy. * Solder tank 75 square (No.A1540) is sold separately.
    Mass (kg)  1.7 (Desoldering/Cord)  Outer dimensions, Width W x Height H x Depth D (mm)  143×100×220  Power Consumption (W)  200  Control Temperature (℃)  200~450 (50 square tank)  Trusco Part No.  334-4797  Sink Inner Dimensions (mm)  50×43.5×50  Power Supply  AC100V 50/60Hz 
    from S$679.90
    Min. 2 days
  4. Refill Pot
    goot (TAIYO ELECTRIC) Refill Pot
    from S$11.99
    Min. 2 days
  5. Solder bath
    goot (TAIYO ELECTRIC) Solder bath
    PID control that realizes accurate temperature control Twin digital display that allows you to check the set temperature and the measured temperature at the same time Adopting a cast iron pot compatible with lead-free solder Since the solder bath and heater are separated, heater replacement is easy.
    Setting Temperature (℃)  (Max) 450  Power Cable (m)  1.5 (no 3-core cord plug)  Type of Control  PID control method  Rated Voltage  100V AC 50/60Hz  Voltage (V)  100  Material  (Solder point) Cast iron  Heater  Sheath heater 
    from S$2,399.00
    Min. 19 days
  6. Square solder bath
    goot (TAIYO ELECTRIC) Square solder bath
    PID control for accurate temperature control. Since the solder bath and heater are separated, it is easy to replace the heater. Check the set temperature and the measured temperature at the same time Twin digital display
    Heater  Nichrome heater  Melt Solder Amount (kg)  About 9.5  Material  (Solder Point) SUS316  Highest Temperature (℃)  400  Power Consumption (W)  650  Inner Dimensions, Width W x Height H x Depth D (mm)  (Point) 180 × 60 × 130  Rated Voltage (V)  100 AC 50/60Hz  Type of Control  PID  Power Cable (m)  1.3 (3-core cord / ground pin plug) 
    from S$2,299.00
    Min. 5 days
  7. Square solder bath
    goot (TAIYO ELECTRIC) Square solder bath
    Standard type with stainless steel acupoints. PID control for accurate temperature control. Since the solder bath and heater are separated, it is easy to replace the heater. Check the set temperature and the measured temperature at the same time Twin digital display
    Highest Temperature (℃)  350  Material  (Solder Point) SUS316  Melt Solder Amount (kg)  About 5.5  Inner Dimensions, Width W x Height H x Depth D (mm)  (Point) 91 × 60 × 135  Power Consumption (W)  440  Power Cable (m)  1.3 (3-core cord / ground pin plug)  Trusco Part No.  112-9956  Type of Control  PID  Heater  Nichrome heater  Rated Voltage (V)  100 AC 50/60Hz 
    from S$1,799.00
    Min. 5 days
  8. Spare point stainless steel
    goot (TAIYO ELECTRIC) Spare point stainless steel
    Replacement pot for POT-100C
    Suitable Model  POT-100C 
    from S$379.90
    Min. 5 days
  9. Hakko 485 body only 100V
    HAKKO Hakko 485 body only 100V
    Jet-type solder tank that can be pinpoint-heated with a nozzle that matches the part Clean the solder that closes the through hole when removing the part with air. Lead-free support for severely eroded impellers and chambers.
    Melt Solder Amount (kg)  10  Plug Shape  2-pole grounding type plug  Mass (kg)  35  Outer dimensions, Width W x Height H x Depth D (mm)  500×245×550  Power Consumption (W)  850  Power Input (V)  AC100 50/60Hz  Setting Temperature (℃)  Room temperature to 300  Temperature Accuracy  ±2℃ 
    from S$11,990.00
    Min. 22 days
  10. Solder Pot
    SURE (ISHIZAKI ELECTRIC MFG) Solder Pot
    The temperature can be set from 220 to 500 ° C with the electronic temperature control circuit method / The melting temperature of the solder can be controlled with the phase control method, so it can be used with either low-temperature solder or high-temperature solder. Erosion-free titanium coa... Read More
    Dimensions, Width W x Depth D x Height H (mm)  160×245×95  Setting Temperature (℃)  220~500  Rated Power (W)  AC100V-300(50/60Hz)  Melt Solder Amount (kg)  About 1.2  Cable Length (m)  About 1.8  Mass (kg)  About 2  Bay Dimensions (mm)  Effective: Approximately Φ80 x H36  Temperature Control  Electronic temperature control type  Heater  Mica heater  Included Accessories  Spatula x 1, instruction manual x 1  Surface Treatment  Tank: Titanium coating 
    from S$289.90
    Min. 2 days
  11. Spare point stainless steel
    goot (TAIYO ELECTRIC) Spare point stainless steel
    Replacement pot for POT-200C
    Suitable Model  POT-200C 
    from S$389.90
    Min. 5 days
  12. Square solder iron
    goot (TAIYO ELECTRIC) Square solder iron
    Uses a cast iron solder tank that is resistant to erosion. A large solder tank that can also be used for M size PCBs. Uses cast iron acupoints for lead-free solder. PID control for accurate temperature control. Check the set temperature and the measured temperature at the same time Twin digital d... Read More
    Material  (Solder point) Cast iron  Highest Temperature (℃)  400  Trusco Part No.  849-8547  Melt Solder Amount (kg)  About 50  Power Cable (m)  3 (No 3-core cord plug)  Type of Control  PID  Mass (kg)  43 (excluding code)  Power Consumption (kW)  Heater  Sheath heater  Rated Voltage (V)  Single phase 200 AC 50 / 60Hz 
    from S$6,699.00
    Min. 23 days
  13. Spare point
    goot (TAIYO ELECTRIC) Spare point
    Replacement pot cast iron for POT-400C
    Suitable Model  POT-400C 
    from S$1,399.00
    Min. 23 days
  14. Square solder bath (cast iron solder bath)
    goot (TAIYO ELECTRIC) Square solder bath (cast iron solder bath)
    A lead-free solder bath suitable for pre-soldering transformer lead wires and soldering small printed circuit boards. Reliable temperature control by PID control is possible. (ON-OFF control is possible by sensor feedback) Room temperature-The temperature of the solder bath can be set up to -500 ... Read More
    Type of Control  PID control method  Dissolved Solder Amount (g)  About 850  Dimensions, Width W x Depth D x Height H (mm)  174×285×142  Melting Time  50 minutes (at MAX setting)  Heater  Ceramic heater  Power Cable (m)  1.5 (In-red 3-core cord)  Setting Temperature (℃)  (Maximum) 500  Rated Voltage  100V AC 50/60Hz  Trusco Part No.  849-8548  Inner Diameter (Φmm)  50  Power Consumption (W)  420  Temperature (℃)  (Point) 500 (MAX)  Voltage (V)  100  Material  (Solder point) Cast iron  Length (mm)  50 
    from S$1,399.00
    Min. 15 days
  15. Solder bath
    HAKKO Solder bath
    from S$1,299.00
    Min. 22 days
  16. Hakko jet-type solder bath body only 100V
    HAKKO Hakko jet-type solder bath body only 100V
    Jet type solder tank that can perform pinpoint heating with a nozzle that matches the part Air cleaning the solder that closes the through holes when removing parts Lead-free compatible with severely eroded impellers and chambers that have been corrosion-resistant
    Melt Solder Amount (kg)  10  Plug Shape  2-pole grounding type plug  Mass (kg)  35  Outer dimensions, Width W x Height H x Depth D (mm)  500×245×550  Power Consumption (W)  850  Power Input (V)  AC100(50/60Hz)  Setting Temperature (℃)  Room temperature to 300  Temperature Accuracy  ±2℃ 
    from S$12,990.00
    Min. 22 days
  17. Stainless steel pot
    HAKKO Stainless steel pot
    Selectable replacement solder tank
    Adaptation  FX-301B-01、FX-300-01 
    Discontinued
  18. Solder bath (lead-free)
    SURE (ISHIZAKI ELECTRIC MFG) Solder bath (lead-free)
    Durability is greatly improved by applying high vacuum special nitriding treatment to SUS-316 in the tank. Compatible with lead-free solder (Pb-free solder) Although the main body is compact, the size of the tank is 90 x 90 mm, which is easy to work with. The amount of solder melted is about 4.7 ... Read More
    Rated Voltage (V)  100(50/60Hz)  Dimensions, Width W x Length x Height H  152×260×150  Temperature Setting Range (℃)  180~450  Heater  2 ceramic heaters  Mass of Main Unit (kg)  2.8 (excluding power cord)  Trusco Part No.  302-9514  Power Consumption (W)  480  Sink Inner Dimensions (mm)  90×90  Melt Solder Amount (kg)  About 4.7 
    Discontinued
  19. Solder bath SOLDERING POT
    HAKKO Solder bath SOLDERING POT
    It is a temperature two-stage switching type. Uses a nichrome heater.
    Dimension B (Φmm)  85  Dimension A (Φmm)  50  Dissolved Solder Amount (g)  557  Dimension E (mm)  27  Dimension G (mm)  65  Dimension C (mm)  110  Bath Temperature (℃)  Strong: 400 / Weak: 360  Depth (mm)  32 (Bath depth)  Power Consumption (W)  Strong: 160 / weak: 120  Dimension F (mm)  38  Dimension D (mm)  175 
    Discontinued
  20. Sure solder bath
    SURE (ISHIZAKI ELECTRIC MFG) Sure solder bath
    The compact design of the desktop is a compact and lightweight type, so it is easy to carry before and after use. It is safe with a solder leak tray. The power switch is an intermediate switch and is safe because it does not come into direct contact with the main unit.
    Melt Solder Amount (kg)  0.9 (when using eutectic solder)  Mass (kg)  1.6  Operating Temperature Range (℃)  230~370  Power Consumption (W)  250  Trusco Part No.  288-0687  Frequency (Hz)  50/60  Main Unit Dimensions, Width W x Depth D x Height H (mm)  93×155×111  Heater  Nichrome  Sink Inner Dimensions (mm)  Width 43 x depth 43 x depth 55 
    Discontinued
  21. Solder pot
    goot (TAIYO ELECTRIC) Solder pot
    Discontinued
  22. Solder bath SOLDERING POT
    HAKKO Solder bath SOLDERING POT
    It is a temperature two-stage switching type. Uses a nichrome heater.
    Bath Temperature (℃)  Strong: 390 / Weak: 340  Dimension F (mm)  38  Dimension D (mm)  135  Dimension B (Φmm)  55  Dimension G (mm)  56  Dimension A (Φmm)  25  Depth (mm)  25 (Bath depth)  Dissolved Solder Amount (g)  109  Dimension E (mm)  18  Power Consumption (W)  Strong: 70 / Weak: 50  Dimension C (mm)  90 
    Discontinued
  23. Small dental solder bath
    HAKKO Small dental solder bath
    A special coated tank with a tank life of 5 times (compared to the company) is standard equipment. Even if the type of solder changes, it can be used in the optimum state by setting parameters. You can select from four patterns of heat supply settings: (tin / lead), (tin / silver / copper), (tin ... Read More
    Control Temperature (℃)  200~450  Power Consumption (W)  200  Melt Solder Amount (kg)  0.85  Power Input (V)  AC100  Mass (kg)  1.7  Trusco Part No.  334-4797  Main Unit Dimensions, Width W x Depth D x Height H (mm)  143×220×100  Bay Dimensions (mm)  Width x depth x height / 50 x 50 x 43.5 
    Discontinued
  24. Hakko 485 body only 100V
    HAKKO Hakko 485 body only 100V
    Trusco Part No.  849-8569 
    Discontinued
View : Grid List
Filter

25 Item(s)

Set Ascending Direction