All Category

Blotters / Reworks

View : Grid List
Filter

Items 1 - 40 of 422

Set Ascending Direction
  1. Soldering Suction Wire
    MonotaRO Soldering Suction Wire
    As it is woven with copper wire, it has an excellent solder absorption effect. Contains flux. For removing solder For removing bridges *Please do not use it for anything other than its intended purpose. *As this is a woven product, there may be slight differences in dimensions. *If the product is... Read More
    Overall Length (m)  1.5 
    Rating:
    76%
    from S$2.59
    Min. 2 days
  2. Desoldering Iron
    ENGINEER Desoldering Iron
    The running cost of the tip nozzle is low! Increased suction power by adopting a new piston mechanism. All alumite finish with excellent corrosion resistance. Automatic discharge function by cleaner shaft. Compact yet suction power equivalent to a cylinder capacity of 12cc! Flexible heat-resistan... Read More
    RoHS directive (corresponding to 10 substances)  Diameter x Length (Φmm x mm)  20×153  Trusco Part No.  368-8534  Mass (g)  52  Cylinder Capacity (cc) 
    Rating:
    92%
    from S$36.99
    Min. 2 days
  3. Solder suction line 3. 9mm
    ENGINEER Solder suction line 3. 9mm
    Trusco Part No.  400-2270  Length (m)  1.5  Mass (g)  14  Width (mm)  3.9 
    from S$9.49
    Min. 2 days
  4. Solder absorber
    SURE (ISHIZAKI ELECTRIC MFG) Solder absorber
    Sure DS-520 is a compact desoldering tool that has a trowel, trowel temperature control circuit, motor, and diaphragm pump built into the gun-type body and can also remove SMD. By adopting a carbon-filled body, anti-static measures are perfect, and of course it is a 3-wire system (earth). Since t... Read More
    Mass (g)  420  Ultimate Vacuum (mHg)  650  Trusco Part No.  127-7502  Type  Electric suction type  Setting Temperature (℃)  380-420 (continuously variable)  Rating (at 50Hz - at 60Hz)  102V-120W (Heater 100W / Motor 12W)  Iron Tip (Hole Diameter) (Φmm)  Exhaust Air (0PEN) (L/min)  15  Time to Reach Maximum Pressure  0.1 
    from S$679.90
    Min. 32 days
  5. Desoldering Tools
    MonotaRO Desoldering Tools
    You can work while holding a soldering iron. Since it has a strong vacuum force, it easily absorbs solder. For removing solder * Do not use for anything other than its intended purpose.
    Material  plastic 
    Rating:
    81%
    from S$12.99
    Min. 2 days
  6. Solder WICK
    HAKKO Solder WICK
    The special flux coating enables short-time processing and does not damage the substrate. Wide variety of width sizes are available. The unique knitting wire fits the work and has good workability. For removing solder from through holes and for removing bridges
    Rating:
    91%
    from S$4.79
    Min. 2 days
  7. Solder Suction Wire
    HOZAN (HOZAN TOOL INDUSTRIAL) Solder Suction Wire
    The heating time is short, and the damage to the printed circuit board due to heat is small.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    82%
    from S$5.69
    Min. 2 days
  8. Lightweight Desoldering Tool SPPON
    HAKKO Lightweight Desoldering Tool SPPON
    A simple solder suction tool that is lightweight, economical, and has powerful suction power. Uses a cleaning shaft that allows the nozzle to be cleaned each time it is used. Easy nozzle replacement. No.18G and No.20G have a protective guard to prevent the piston part from hitting the face during... Read More
    Rating:
    91%
    from S$22.99
    Min. 2 days
  9. Desoldering Wick (Stainless Steel Mouth)
    goot (TAIYO ELECTRIC) Desoldering Wick (Stainless Steel Mouth)
    It can be used with confidence in precision equipment. With stainless steel base. It comes in a dispense case and is easy to hold, and your fingertips do not get hot. Printed circuit board solder removal.
    Length (m) 
    Rating:
    91%
    from S$7.99
    Min. 2 days
  10. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    A desoldering wire made by impregnating a copper braided wire with a special non-chlorine flux. Printed circuit board solder removal.
    Length (m)  1.5 
    Rating:
    94%
    from S$3.79
    Min. 2 days
  11. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    Solder suction wire CP series Solder suction wire (with bobbin) Comes in a bobbin case with excellent portability. Suction wire for lead-free solder: The flat woven suction wire is soft, so it fits well on the board and efficiently transfers heat. It has a high thermal response and can absorb sol... Read More
    Specification  Rosin: Non-chlorine (RMA) 
    Rating:
    94%
    from S$49.99
    Min. 2 days
  12. Solder Shutaro NEO
    Sunhayato Solder Shutaro NEO
    A solder suction device that integrates a heater and a suction tube. It can be operated with one hand and can be sucked up reliably. The solder in the through holes can be removed cleanly. It can also be used for lead-free solder with 45W power. For removing solder when replacing parts, eliminati... Read More
    Power Cable (m)  1.4~1.5  Highest Temperature (℃)  About 400  Insulation Resistance (MΩ)  over 100  Heater (W)  45 (Nichrome)  Rated Voltage (V)  AC100(50/60Hz)  Trusco Part No.  819-5899  Mass (g)  180 
    Rating:
    94%
    from S$85.99
    Min. 2 days
  13. Desoldering Sucker
    goot (TAIYO ELECTRIC) Desoldering Sucker
    Lightweight, economical, powerful, and absorbs molten solder with a powerful suction force. Self-cleaning shaft: Storage lock function that prevents nozzles from clogging: Convenient to carry and store (GS-100, GS-104 only) Deluxe type: Large suction capacity (GS-100 only)
    Color  Ivory  Color (Body)  Ivory 
    Rating:
    91%
    from S$22.99
    Min. 2 days
  14. Cleaning Pin
    HAKKO Cleaning Pin
    * The cleaning tool will not be effective unless it is used according to the inner diameter of the nozzle you are using.
    Suitable for  474・475・701・484・808 
    Rating:
    84%
    from S$4.79
    Min. 2 days
  15. HAKKO Wick No-Clean
    HAKKO HAKKO Wick No-Clean
    It has good thermal conductivity and can absorb solder cleanly in a short time. The residue is transparent and uses a halogen-free flux. The case is anti-static. Remove solder from through holes. Removal of the bridge.
    Rating:
    100%
    from S$3.79
    Min. 2 days
  16. Nozzle Standard Type
    HAKKO Nozzle Standard Type
    Mass (g)  15 
    Rating:
    85%
    from S$19.99
    Min. 2 days
  17. Solder absorption line
    HOZAN (HOZAN TOOL INDUSTRIAL) Solder absorption line
    Blotting wire compatible with lead-free solder The workability of lead-free solder has been significantly improved by using a flux that has excellent heat conduction and high activity in the high temperature range. Work is completed speedily without damaging the board.
    RoHS directive (corresponding to 10 substances)  Overall Length (m)  1.5 
    Rating:
    80%
    from S$6.39
    Min. 2 days
  18. Soldering Iron Replacement Nozzle
    goot (TAIYO ELECTRIC) Soldering Iron Replacement Nozzle
    Standard nozzle
    Suitable for  TP-100、TP-200AS 
    Rating:
    95%
    from S$38.99
    Min. 2 days
  19. Sucker FR-301 (Desoldering Tool)
    HAKKO Sucker FR-301 (Desoldering Tool)
    The ease of use has been shaped. Achieves excellent operability and easy maintenance. The original sensor feedback system is adopted and the high-precision temperature control function is carried.
    Resistance between ground  (Nozzle) <2Ω  Mass (kg)  0.52  2018 Trusco page  3 0516  Temperature Setting Range  350~500℃  Ultimate Vacuum Pressure  81kPa(610mmHg)  Power Consumption  98W  Power Supply  AC100V 50/60Hz  Heater  Ceramic heater  Vacuum Generation Method  Diaphragm pump  Nozzle  Φ1mm (Part No.N61-08)  Leakage Voltage (mV)  <2 
    Rating:
    90%
    from S$369.90
    Min. 2 days
  20. Nozzle S Type
    HAKKO Nozzle S Type
    Mass (g)  15 
    from S$19.99
    Min. 2 days
  21. Replacement Filter
    goot (TAIYO ELECTRIC) Replacement Filter
    Suitable for  TP-100 / 100AS, TP-200 / 210 series 
    Rating:
    100%
    from S$4.19
    Min. 2 days
  22. Solder Wick (Solder Absorption Wire)
    Sunhayato Solder Wick (Solder Absorption Wire)
    A convenient wire that can easily absorb solder. For simplification of solder removal work For reducing heat stress on boards when replacing parts
    Overall Length (m)  1.5 
    Rating:
    70%
    from S$8.69
    Min. 2 days
  23. nozzle
    HAKKO nozzle
    For FR-300
    Mass (g)  5.25  2018 Trusco page  3 0516 
    Rating:
    80%
    from S$19.99
    Min. 2 days
  24. Solder Remover Replacement Nozzle (for 475-51 / 474-71)
    HAKKO Solder Remover Replacement Nozzle (for 475-51 / 474-71)
    Soldering remover replacement nozzle (for 475-51 / 474-71) For trowel part 815/816. * If you order by cash on delivery, it may be shipped the next day or later.
    Mass (g)  10 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  25. Cleaning Pin
    goot (TAIYO ELECTRIC) Cleaning Pin
    Suitable for  TP-100、TP-100AS、TP-200AS、TP-280AS 
    Rating:
    100%
    from S$4.19
    Min. 2 days
  26. Nozzle SS Type
    HAKKO Nozzle SS Type
    Mass (g)  15 
    from S$22.99
    Min. 2 days
  27. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    A desoldering wire made by impregnating a copper braided wire with a special non-chlorine flux. Printed circuit board solder removal.
    Length (m)  1.5 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  28. Spring Filter
    HAKKO Spring Filter
    A filter attached to the filter pipe of the suction device iron.
    Suitable for  Body (474/475), Trowel (809/815/816)  Trusco Part No.  367-8571 
    Rating:
    100%
    from S$8.89
    Min. 2 days
  29. Silicone Tube for SS-02
    ENGINEER Silicone Tube for SS-02
    Please cut and use.
    RoHS directive (corresponding to 10 substances)  Diameter x Length (Φmm x mm)  2×50  Trusco Part No.  827-9389 
    Rating:
    100%
    from S$5.59
    Min. 2 days
  30. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    ● A braided wire of copper that is not impregnated with a special non-chlorine flux. ● There are flat knitting types that emphasize thermal conductivity and tube knitting types that emphasize blotting. ● Because it is a manual type, no power is required.
    Length (m)  About 1.5 
    Rating:
    100%
    from S$5.39
    Min. 2 days
  31. Nozzle long type
    HAKKO Nozzle long type
    Mass (g)  15 
    from S$22.99
    Min. 2 days
  32. Replacement Cartridge Set for TP-100
    goot (TAIYO ELECTRIC) Replacement Cartridge Set for TP-100
    Suitable for  Automatic solder sucker TP-100 
    Rating:
    93%
    from S$5.59
    Min. 2 days
  33. Replacement nozzle for solder cleaner HS-801
    HOZAN (HOZAN TOOL INDUSTRIAL) Replacement nozzle for solder cleaner HS-801
    Replacement nozzle for Solder Cleaner HS-801
    Rating:
    60%
    from S$29.99
    Min. 2 days
  34. Nozzle Oval Type
    HAKKO Nozzle Oval Type
    Mass (g)  15 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  35. Soldering wire wick
    HAKKO Soldering wire wick
    Easy, easy and economical desoldering wire. It has good heat conduction and can be used with a low wattage soldering iron. An unflux type that does not allow flux to penetrate. Apply the flux for electronic parts you have to the corrected part before use. For removing solder from through holes an... Read More
    Type  Non-flux  Overall Length (m)  1.5 
    from S$4.49
    Min. 2 days
  36. Solder Suction Wire
    ENGINEER Solder Suction Wire
    A solder suction wire with excellent absorbency that uses a special flux for high-purity copper wire. For soldering correction work and suction work.
    RoHS directive (corresponding to 10 substances)  Length (m)  1.5 
    Rating:
    80%
    from S$8.69
    Min. 2 days
  37. Solderpurt
    HOZAN (HOZAN TOOL INDUSTRIAL) Solderpurt
    The ultimate vacuum is about 50kPa, and a quick start-up self-cleaning mechanism is used. Affordable popular solder sucker that is convenient for on-site repairs. The suction lever of US-140 can be adjusted in 3 steps.
    Rating:
    80%
    from S$39.99
    Min. 2 days
  38. Desoldering Tool with built-in Vacuum Pump FR-410
    HAKKO Desoldering Tool with built-in Vacuum Pump FR-410
    A solder sucker with a built-in vacuum pump. With a high power of 140W, it is ideal for removing solder from multilayer boards. Uses the trowel part of the quick change mechanism (trowel part FR-4103). Improved suction work efficiency with unique functions.
    from S$449.90
    Min. 2 days
  39. Cleaning Drill
    HAKKO Cleaning Drill
    * The cleaning tool will not be effective unless it is used according to the inner diameter of the nozzle you are using.
    from S$12.99
    Min. 2 days
  40. Solder Suction Device / Attractor
    ENGINEER Solder Suction Device / Attractor
    A small pencil type with outstanding portability. A high-performance solder sucker with an aluminum body that sucks molten solder with a strong suction force. With a cleaner shaft that automatically cleans the nozzle, there is no clogging of the solder even during continuous work, improving worka... Read More
    from S$29.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 422

Set Ascending Direction