All Category

Solder Wicks

View : Grid List
Filter

Items 1 - 40 of 54

Set Ascending Direction
  1. Soldering Suction Wire
    MonotaRO Soldering Suction Wire
    As it is woven with copper wire, it has an excellent solder absorption effect. Contains flux. For removing solder For removing bridges *Please do not use it for anything other than its intended purpose. *As this is a woven product, there may be slight differences in dimensions. *If the product is... Read More
    Overall Length (m)  1.5 
    Rating:
    76%
    from S$2.59
    Min. 2 days
  2. Solder suction line 3. 9mm
    ENGINEER Solder suction line 3. 9mm
    Trusco Part No.  400-2270  Length (m)  1.5  Mass (g)  14  Width (mm)  3.9 
    from S$9.49
    Min. 2 days
  3. Solder WICK
    HAKKO Solder WICK
    The special flux coating enables short-time processing and does not damage the substrate. Wide variety of width sizes are available. The unique knitting wire fits the work and has good workability. For removing solder from through holes and for removing bridges
    Rating:
    91%
    from S$4.79
    Min. 2 days
  4. Solder Suction Wire
    HOZAN (HOZAN TOOL INDUSTRIAL) Solder Suction Wire
    The heating time is short, and the damage to the printed circuit board due to heat is small.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    82%
    from S$5.69
    Min. 2 days
  5. Desoldering Wick (Stainless Steel Mouth)
    goot (TAIYO ELECTRIC) Desoldering Wick (Stainless Steel Mouth)
    It can be used with confidence in precision equipment. With stainless steel base. It comes in a dispense case and is easy to hold, and your fingertips do not get hot. Printed circuit board solder removal.
    Length (m) 
    Rating:
    91%
    from S$7.99
    Min. 2 days
  6. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    A desoldering wire made by impregnating a copper braided wire with a special non-chlorine flux. Printed circuit board solder removal.
    Length (m)  1.5 
    Rating:
    94%
    from S$3.79
    Min. 2 days
  7. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    Solder suction wire CP series Solder suction wire (with bobbin) Comes in a bobbin case with excellent portability. Suction wire for lead-free solder: The flat woven suction wire is soft, so it fits well on the board and efficiently transfers heat. It has a high thermal response and can absorb sol... Read More
    Specification  Rosin: Non-chlorine (RMA) 
    Rating:
    94%
    from S$49.99
    Min. 2 days
  8. HAKKO Wick No-Clean
    HAKKO HAKKO Wick No-Clean
    It has good thermal conductivity and can absorb solder cleanly in a short time. The residue is transparent and uses a halogen-free flux. The case is anti-static. Remove solder from through holes. Removal of the bridge.
    Rating:
    100%
    from S$3.79
    Min. 2 days
  9. Solder absorption line
    HOZAN (HOZAN TOOL INDUSTRIAL) Solder absorption line
    Blotting wire compatible with lead-free solder The workability of lead-free solder has been significantly improved by using a flux that has excellent heat conduction and high activity in the high temperature range. Work is completed speedily without damaging the board.
    RoHS directive (corresponding to 10 substances)  Overall Length (m)  1.5 
    Rating:
    80%
    from S$6.39
    Min. 2 days
  10. Solder Wick (Solder Absorption Wire)
    Sunhayato Solder Wick (Solder Absorption Wire)
    A convenient wire that can easily absorb solder. For simplification of solder removal work For reducing heat stress on boards when replacing parts
    Overall Length (m)  1.5 
    Rating:
    70%
    from S$8.69
    Min. 2 days
  11. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    A desoldering wire made by impregnating a copper braided wire with a special non-chlorine flux. Printed circuit board solder removal.
    Length (m)  1.5 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  12. Desoldering Wick
    goot (TAIYO ELECTRIC) Desoldering Wick
    ● A braided wire of copper that is not impregnated with a special non-chlorine flux. ● There are flat knitting types that emphasize thermal conductivity and tube knitting types that emphasize blotting. ● Because it is a manual type, no power is required.
    Length (m)  About 1.5 
    Rating:
    100%
    from S$5.39
    Min. 2 days
  13. Soldering wire wick
    HAKKO Soldering wire wick
    Easy, easy and economical desoldering wire. It has good heat conduction and can be used with a low wattage soldering iron. An unflux type that does not allow flux to penetrate. Apply the flux for electronic parts you have to the corrected part before use. For removing solder from through holes an... Read More
    Type  Non-flux  Overall Length (m)  1.5 
    from S$4.49
    Min. 2 days
  14. Solder Suction Wire
    ENGINEER Solder Suction Wire
    A solder suction wire with excellent absorbency that uses a special flux for high-purity copper wire. For soldering correction work and suction work.
    RoHS directive (corresponding to 10 substances)  Length (m)  1.5 
    Rating:
    80%
    from S$8.69
    Min. 2 days
  15. Desoldering Wire WICK
    HAKKO Desoldering Wire WICK
    The best suction wire if you want to use the flux you currently have. It is a specification of copper braid only. Removal of snow hole solder. Removal of the bridge.
    Overall Length (m)  1.5 
    Rating:
    90%
    from S$3.19
    Min. 2 days
  16. HAKKO WICK NO.3 30mX2.0mm
    HAKKO HAKKO WICK NO.3 30mX2.0mm
    Easy, easy and economical desoldering wire. For removing solder remaining after removing surface mounts such as BGA.
    Line Width (mm)  1.9  Trusco Part No.  112-0456  Length (m)  Mass (g)  20  Type  With flux (Rosin) 
    from S$5.29
    Min. 2 days
  17. Halogen-free solder blotting wire
    goot (TAIYO ELECTRIC) Halogen-free solder blotting wire
    There is no intentional inclusion of halogen components. Uses non-cleaning type RMA flux. It is a plate knitting specification with good thermal conductivity recommended for lead-free solder. Uses an anti-static case. Printed circuit board solder removal.
    Specification  Includes a convenient chuck for storage  Length (m)  1.5 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  18. Solder blotting wire 1.5mm
    ENGINEER Solder blotting wire 1.5mm
    A solder suction wire with excellent absorbency that uses a special flux for high-purity copper wire. For soldering correction work and suction work.
    RoHS directive (corresponding to 10 substances)  Length (m)  1.5  Width (mm)  1.5  Trusco Part No.  368-8658 
    Rating:
    100%
    from S$7.99
    Min. 2 days
  19. HAKKO WICK NO. 4 100MX2. 5mm
    HAKKO HAKKO WICK NO. 4 100MX2. 5mm
    For removing solder from through holes and removing solder from bridges.
    Trusco Part No.  849-8589  Mass (kg)  0.5  Width (mm)  2.5  Overall Length (m)  100 
    from S$159.90
    Min. 2 days
  20. Hakko Wick No Clean
    HAKKO Hakko Wick No Clean
    Size  1.5m×2.5mm 
    from S$4.29
    Min. 4 days
  21. Soderwick [0.9mm, 10 rolls]
    ESCO Soderwick [0.9mm, 10 rolls]
    Esco Part No.  EA323-1  Width (mm)  0.9 
    from S$59.99
    Min. 4 days
  22. 3.9mm soderwick (1 roll)
    ESCO 3.9mm soderwick (1 roll)
    Esco Part No.  EA323-15 
    from S$8.89
    Min. 6 days
  23. Soderwick [3.9mm, 10 rolls]
    ESCO Soderwick [3.9mm, 10 rolls]
    Esco Part No.  EA323-5  Width (mm)  3.9 
    from S$79.99
    Min. 4 days
  24. Soderwick [1.5mm, 10 rolls]
    ESCO Soderwick [1.5mm, 10 rolls]
    Esco Part No.  EA323-2  Width (mm)  1.5 
    from S$57.99
    Min. 4 days
  25. Solder Suction Wire Wick No Clean
    HAKKO Solder Suction Wire Wick No Clean
    Easy, easy and economical desoldering wire A new lineup of bags with zippers (UV cut specifications) that are convenient for storage to remove solder remaining after removing surface mounts such as BGA.
    Length (m)  Specification  Halogen free flux  Type  No clean 
    from S$6.39
    Min. 2 days
  26. 0.9mm Soderwick (1 roll)
    ESCO 0.9mm Soderwick (1 roll)
    Esco Part No.  EA323-11 
    from S$6.69
    Min. 6 days
  27. Soderwick [5.6mm 10 rolls]
    ESCO Soderwick [5.6mm 10 rolls]
    Width (mm)  5.6  Esco Part No.  EA323-6 
    Rating:
    20%
    from S$88.99
    Min. 4 days
  28. Blotting wire
    goot (TAIYO ELECTRIC) Blotting wire
    A desoldering wire made by impregnating a copper braided wire with a special non-chlorine flux. For removing solder from printed circuit boards
    Width (mm) 
    from S$4.19
    Min. 7 days
  29. Soderwick [1.9mm 10 rolls]
    ESCO Soderwick [1.9mm 10 rolls]
    Esco Part No.  EA323-3  Width (mm)  1.9 
    from S$63.99
    Min. 4 days
  30. Desolder Braid
    HOZAN (HOZAN TOOL INDUSTRIAL) Desolder Braid
    RoHS directive (corresponding to 10 substances)  Overall Length (m)  1.5  Line Width (mm) 
    from S$5.99
    Min. 6 days
  31. Solder suction line  One step
    DESCO Solder suction line One step
    It is used for repairing and repairing printed circuit boards and boards of electronic devices such as computers and mobile phones. Solder can be easily absorbed from the parts and pads on the board. Since high quality copper wire is woven, it can be absorbed with a small amount of use. Made of c... Read More
    Length (m)  1.5 
    from S$129.90
    Min. 3 days
  32. 1.9mm soderwick (1 roll)
    ESCO 1.9mm soderwick (1 roll)
    Esco Part No.  EA323-13 
    from S$7.29
    Min. 6 days
  33. 1.5mm soderwick (1 roll)
    ESCO 1.5mm soderwick (1 roll)
    Esco Part No.  EA323-12 
    from S$6.89
    Min. 6 days
  34. 5.6mm Soderwick (1 roll)
    ESCO 5.6mm Soderwick (1 roll)
    Esco Part No.  EA323-16 
    from S$9.99
    Min. 6 days
  35. 2.8mm soderwick (1 roll)
    ESCO 2.8mm soderwick (1 roll)
    Esco Part No.  EA323-14 
    from S$8.29
    Min. 6 days
  36. Soderwick [2.8mm, 10 rolls]
    ESCO Soderwick [2.8mm, 10 rolls]
    Width (mm)  2.8  Esco Part No.  EA323-4 
    from S$68.99
    Min. 4 days
  37. Soldering wire
    HOZAN (HOZAN TOOL INDUSTRIAL) Soldering wire
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  207-2719  Mass (g)  67 
    from S$44.99
    Min. 7 days
  38. Solder absorption line
    HOZAN (HOZAN TOOL INDUSTRIAL) Solder absorption line
    A solder suction wire that is compatible with lead-free solder and has high absorption capacity. It has excellent thermal conductivity and can work efficiently with a short period of overheating.
    Overall Length (m)  1.5 
    Discontinued
  39. Solder blotting line WICK
    HAKKO Solder blotting line WICK
    Uses a non-corrosive, non-cleaning type flux with a transparent residue. The case is also ESD specification, and it is a blotting wire that can be used at any work site. This is a new suction line proposed by Hakko. Removal of through-hole solder. Removal of the bridge.
    Overall Length (m)  1.5 
    Rating:
    100%
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 54

Set Ascending Direction