All Category

Blower Type

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 58

Set Ascending Direction
  1. Mascot Static Eliminator
    Riken Seiko Mascot Static Eliminator
    Prevents static electricity tampering. A manual static eliminator that does not use a power supply or consumables. Improves work efficiency by removing static electricity from containers and chemicals when weighing and subdividing chemicals (pharmacy, research institute, etc.). Reduces clinging a... Read More
    As ONE Part Number  1-8912-01  Dimensions, Height x Width x Thickness (mm)  24×98×14  Mass (g)  26  Color  Black 
    Rating:
    95%
    from S$119.90
    Min. 2 days
  2. AEON Airsoft Orca
    VESSEL AEON Airsoft Orca
    Static electricity is removed by the ion air that pops out. Built-in 70KHz voltage transformer! Outstanding ion balance within ± 10V. Safety circuit with constant voltage DC24V. The cell production table allows you to change the piping and wiring according to your work, so it does not get in the ... Read More
    Installation Location  Indoor non-hazardous area  Ion generation method  AC high frequency corona discharge type  Ozone Generation (ppm)  0.05 or less (measuring distance 50mm)  Range to Use (mm)  50~300  Working Air Pressure (MPa)  0.1~0.6  Protective Function  Current fuse (0.5A on board)  Mass (g)  About 260  Current Consumption (mA)  100(typ)  Trusco Part No.  785-0841  Applied voltage (kV)  About AC4.5  Input Voltage (V)  DC24(±5%) 
    from S$789.90
    Min. 2 days
  3. Static electricity removal ion beam gun
    VESSEL Static electricity removal ion beam gun
    ● Ergonomic grip that fits your hand, and a compact and lightweight resin body. ● Equipped with green LED lighting that makes it easy to see dust. ● Safety design with built-in piezoelectric transformer. The working voltage is DC24V safety, low voltage, with a dedicated adapter. ● Equipped with a... Read More
    Power Input (V)  DC24±5%、AC100~240  Current Consumption (mA)  100(typ)  Trusco Part No.  496-1251  Mass (g)  200  Operation Ambient Temperature (℃)  5~40 
    from S$999.00
    Min. 2 days
  4. Gun type ionizer
    KASUGA DENKI Gun type ionizer
    The high-voltage power supply and static elimination electrode are built into the air gun body, and the high-voltage cable is not exposed, making it a highly safe design. The integrated structure of the ultra-compact high-voltage power supply and the air gun makes it compact and lightweight, so y... Read More
    Power Consumption (VA)  About 2.5  Mass (g)  About 270  discharge electrode needle  tungsten  Ozone Generation (ppm)  0.02 or less  Ion Generating Type  High frequency corona discharge type  Included Accessories  AC adapter  Air Pressure Range (MPa)  0.05~0.6  Input Voltage (V)  DC24 
    from S$859.90
    Min. 2 days
  5. Static electricity removal power generation gun
    VESSEL Static electricity removal power generation gun
    No need for external power supply. The motor cartridge (replaceable) converts compressed air into electric power. The central rotor is rotated to generate electricity and supply power to the high-voltage power supply. PAT.P. Static and dust removal before painting large products such as cars, fur... Read More
    Storage Temperature Range (℃)  -30~+50  supply air pressure (MPa)  0.3 to 0.6 (rated 0.5)  Operating Temperature Range (℃)  0~+45  Wind Speed (m/s)  12.3(0.5MPa、200L/min、150mm)  Dimensions (H x W x D) (mm)  191×232.5×50.6  Air Consumption (L/min)  200  Mass of Main Unit (g)  470  Noise Level (dB(A))  88(0.5MPa、200L/min、1m)  Ion Generating Type  AC corona discharge type  Applied voltage (kV)  AC8p-p (±5%)/32kHz(Typ.)  Suitable Fluid  Clean air  Structure  Direct connection type  Where to Use  Indoor  Included Accessories  Instruction manual  Ion Balance  ±30V(0.5MPa、200L/min、150mm)  air connection  Φ8mm tube compatible, one-touch fitting 
    from S$949.90
    Min. 2 days
  6. Static removal high power gun
    VESSEL Static removal high power gun
    Titanium is used for the discharge needle of the nozzle. Equipped as standard with a high-voltage shielded cable that is less affected by noise. The air gun body is made of sturdy aluminum die-cast, and is a large lever that is easy to pull and has excellent workability. For workpieces with a lar... Read More
    Storage Temperature Range (℃)  -30~+50  Operating Temperature Range (℃)  0~+45  Air Consumption (L/min)  100  Ion Generating Type  AC corona discharge type  Applied voltage (kV)  AC3.5 50 / 60Hz (use GP-1 4kV)  Installation distance (mm)  About 50-300 (Charged object-Gun tip)  Ion Balance  Adjustable on the GP-1 side  Suitable Fluid  Clean air  Input power (V)  DC24V±10%  Cable Length (m)  High pressure: 3  Protection Circuit  High voltage power supply Yumbit  Suitable for  High voltage power supply: GP-1 4kV  Installation Location  Indoor  supply air pressure (MPa)  Maximum: 0.7  Connector  Terminal: High-voltage connector CON-4  air connection  Φ8mm tube compatible, one-touch fitting 
    from S$679.90
    Min. 6 days
  7. Ionizer blow type DTY-ELK01
    KOGANEI Ionizer blow type DTY-ELK01
    It has a built-in small piezoelectric transformer and can be used to supply constant voltage DC power. In addition to blow type, fan type and bar type are available. It realizes compressed air transfer of static elimination ions and enables pinpoint static elimination, and has a wide variety of n... Read More
    Current Consumption (mA)  About 70  Output Voltage (V)  Approx. 2k (high frequency type)  Power Supply  DC24V±5%  Mass (g)  60  Working Air Pressure (MPa)  0.05~0.5  Air Consumption (L/min [ANR])  280  Type  Standard type  Static Elimination Time (seconds)  0.5 or less  Included Accessories  Power signal cable (2m), bracket 
    from S$749.90
    Min. 8 days
  8. Ultra compact ionizer high frequency AC system
    Panasonic (Panasonic Industrial Devices SUNX) Ultra compact ionizer high frequency AC system
    The main body is an ultra-compact size of 109 x 27 x 28 mm, so it can be easily incorporated into equipment or retrofitted to equipment. In addition, since the high-voltage power supply unit is built into the main unit, no extra space is required other than the static elimination unit. Equipped w... Read More
    Operation Ambient Temperature (℃)  0 to 55 (no condensation)  Ozone Generation (ppm)  0.03 or less  Operating Pressure Range (MPa)  0.05~0.7  RoHS directive (corresponding to 10 substances)  Static Elimination Time (seconds)  1 or less  Residual voltage (V)  1 or less (at 50mA sink current)  Power Supply Voltage (V)  24(DC・±10%)  Ambient Humidity to Use  35~65%RH  Supply Air Flow Rate (L/min)  500 (ANR) or less  Current Consumption (mA)  70 or less  Mass (g)  About 120  Discharge Output Voltage (V)  About 2000  Suitable Fluid  Air (dry clean air)  Discharge Type  High frequency AC method  Output  NPN trANSIstor open collector  Short Circuit Protection  apparatus  Ion Balance  ± 10V or less 
    from S$579.90
    Min. 2 days
  9. Motor cartridge
    VESSEL Motor cartridge
    Converts compressed air into electric power. The central rotor is rotated to generate electricity and supply power to the high-voltage power supply. Replacement parts for static electricity removal power generation gun No.G-9
    Service Life  6 months 
    from S$189.90
    Min. 4 days
  10. High power gun
    VESSEL High power gun
    It is a power adapter. * Be sure to read the instruction manual to use the product safely. * Please be careful about condensation. It may cause electric shock or malfunction. * Never use in an area that requires an explosion-proof structure. * High voltage is applied to the discharge needle, so k... Read More
    Mass (g)  155  Trusco Part No.  868-8806  Material  Resin 
    from S$109.90
    Min. 5 days
  11. ASPURE DIT Gun Ionizer
    AS ONE ASPURE DIT Gun Ionizer
    * Compressor and AC adapter are not included in the main unit.
    Connection Bore Diameter (Φmm)  (Compressor) Outer diameter 6  Material (Needle)  (Ion) made of titanium  Ozone Generation (ppm)  0.05 or less  As ONE Part Number  1-3008-01  Power Supply  DC24V、0.15A、50/60Hz  Ion Balance  ±15V 
    from S$779.90
    Min. 4 days
  12. Charging Gun
    AS ONE Charging Gun
    As ONE Part Number  2-9739-01 
    from S$2,599.00
    Min. 4 days
  13. Static Electricity Removing Air Blow Gun
    AS ONE Static Electricity Removing Air Blow Gun
    Precise static elimination is possible with an ion balance of ± 15V or less. Equipped with a 0.01 micron high-performance filter as standard equipment. The air flow rate can be adjusted at the base of the gun. * Compressor is not included.
    Ozone Generating Amount  0.001ppm or less  Ion Balance  0±15V  Power Cable  1.9m 3P (with conversion adapter)  Dimension (mm)  194×29×142  As ONE Part Number  9-1004-11  Input Voltage (V)  AC100V 50/60Hz  Mass (kg)  Control unit / 4 (including 2.1m cable)  Mass (g)  Gun / 185 
    from S$2,399.00
    Min. 13 days
  14. Ionizer
    SIMCO Ionizer
    RoHS directive (corresponding to 10 substances) 
    from S$1,199.00
    Min. 5 days
  15. Clean Jet Gun
    Hugle Electronics Clean Jet Gun
    As ONE Part Number  1-9117-21 
    from S$1,899.00
    Min. 13 days
  16. Ionizer (Air blow type) KS1
    OMRON Ionizer (Air blow type) KS1
    from S$13.99
    Min. 4 days
  17. Ionizer blow type DTY-ZKTL
    KOGANEI Ionizer blow type DTY-ZKTL
    Type  Low dust generation type  Minimum Bending Radius (mm)  10 
    from S$85.99
    Min. 11 days
  18. Ion Air Duster (with Air Tubing and Power Cord)
    AS ONE Ion Air Duster (with Air Tubing and Power Cord)
    It is an ionizer air duster with a built-in piezoelectric transformer using the corona discharge method. Dust is blown off with air and the ion shower instantly removes static electricity, eliminating the return of dust. By installing a line filter, 0.01 μm of dust and moisture are removed and cl... Read More
    Ozone Generation (ppm)  0.04 or less  Dimension (mm)  135×25×140  Mass (g)  280 (main unit only)  Power Consumption (W)  About 2.4  Input Power  DC+24V  Material  Plastic, aluminum alloy, copper alloy  Connection Bore Diameter (Φmm)  Φ6 one-touch fitting (compressor) 
    from S$1,399.00
    Min. 13 days
  19. Ionizer blow type DTY-ELK01-S
    KOGANEI Ionizer blow type DTY-ELK01-S
    It has a built-in small piezoelectric transformer and can be used to supply constant voltage DC power. In addition to blow type, fan type and bar type are available. It realizes compressed air transfer of static elimination ions and enables pinpoint static elimination, and has a wide variety of n... Read More
    Working Air Pressure (MPa)  0.05~0.5  Output Voltage (V)  Approx. 2k (high frequency type)  Current Consumption (mA)  About 70  Type  Air-saving type  Air Consumption (L/min [ANR])  60  Mass (g)  75  Included Accessories  Power signal cable (2m), bracket  Power Supply  DC24V±5%  Static Elimination Time (seconds)  0.8 or less 
    from S$799.90
    Min. 9 days
  20. Foot Switch
    AS ONE Foot Switch
    from S$94.99
    Min. 13 days
  21. Thin ionizer
    Panasonic (Panasonic Industrial Devices SUNX) Thin ionizer
    Ozone Generation (ppm)  0.05 or less  Withstand Pressure (MPa)  0.05~0.5  RoHS directive (corresponding to 10 substances)  Static Elimination Time (seconds)  1 second or less  Current Consumption (mA)  120 or less  Number of Connections  5 (including own machine)  Supply Air Flow Rate (L/min)  60 (ANR) or less  Material (Case)  ABS (nickel plating)  Mass of Main Unit (g)  About 110  Packing Mass (g)  About 180  Discharge Output Voltage (V)  About 2000  Suitable Fluid  Air (dry clean air)  Case Grounding Type  C (capacitor) ground  Power Supply Voltage  DC24V ±10%  Short Circuit Protection  Equipment  Discharge Type  High frequency AC method  Type  Spot type  Material (Nozzle)  Stainless steel  material (screw mounting part)  Stainless steel  Material (Discharge Needle)  tungsten  Ion Balance  ± 15V or less 
    from S$2,399.00
    Min. 4 days
  22. Static electricity removal high power nozzle
    VESSEL Static electricity removal high power nozzle
    Dust can be blown off by removing static electricity and using air. It is used by connecting to the product frequency type high-voltage power supply unit GP-1 4KV. The discharge needle uses titanium, which has less wear, and exhibits stable performance over the long term. Since the discharge need... Read More
    Trusco Part No.  868-8847  Height (mm)  23.9  Mass (g)  350  Length (mm)  25.2  Width (mm)  65.5  Power Input (V)  DC24V±10%  Power Consumption (mA)  90 
    from S$449.90
    Min. 6 days
  23. Ionizer blow gun
    Sunhayato Ionizer blow gun
    By corona discharging high-voltage alternating current and simultaneously injecting + -bipolar ions in a well-balanced manner, static electricity is instantly neutralized and eliminated. Ions are ejected just by pulling the trigger, and anyone can use it easily. A handy type that is convenient to... Read More
    Discharge Type  AC corona discharge type  Trusco Part No.  109-7669 
    Discontinued
  24. Ionizer blow gun
    Sunhayato Ionizer blow gun
    By corona discharging high-voltage alternating current and simultaneously injecting + -bipolar ions in a well-balanced manner, static electricity is instantly neutralized and eliminated. Ions are ejected just by pulling the trigger, and anyone can use it easily. Dedicated type for compressor. If ... Read More
    Storage Temperature Range (℃)  -10~+50  Operating Temperature (℃)  0~50  Storage Humidity (%)  20~90RH  Input Power (V)  DC6  Fitting  Φ4mm tube fitting 
    Discontinued
  25. Airsoft HBA
    SIMCO Airsoft HBA
    An air gun for removing static electricity that simultaneously prevents and removes dust due to static electricity when processing plastic molded products. A lightweight air gun that is inexpensive and can be used for a wide range of purposes. * This product has a non-explosion-proof structure. I... Read More
    Air Pressure Range (MPa)  (Input) 0-0.7  Operating Ambient Temperature (℃)  0~46  Cable Length (m)  (High pressure) 3  Color  (Gun body part) Silver  Material  (Gun) Aluminum  Air Consumption (NL/min)  120 (when air pressure is 0.5MPa)  Screw size  Air joint (one-touch joint) / PT1 / 8  Input Voltage (V)  AC100 (single phase)  Operating humidity (%)  80RH or less  Set Contents  Air gun HBA, power unit F164YR  Input Frequency (Hz)  50/60  Suitable Tube Outer Diameter (Φmm)  Cable  Twin cable 
    Rating:
    100%
    Discontinued
  26. High power gun
    VESSEL High power gun
    Suitable Air Pressure (MPa)  MAX0.7  Mass (kg)  Trusco Part No.  855-2070 
    Discontinued
  27. DC nozzle type static eliminator
    AS ONE DC nozzle type static eliminator
    As ONE Part Number  1-9573-01  Mass (kg)  1.5  Dimension (mm)  105×175×74 
    Discontinued
  28. ionFOCUSⅡ-L body
    SIMCO ionFOCUSⅡ-L body
    You can check the normal operation status (blue LED lit) and abnormal stop status (red LED lit) even from a distance. It also has a built-in high voltage anomaly detection circuit. If a high voltage abnormality (short circuit, leak, etc.) occurs, the high voltage output from the built-in power un... Read More
    Air Consumption (NL/min)  187 (at 0.3 MPa)  Outer Dimensions (mm)  31×79×61  Included Accessories  AC adapter, adapter for nozzle  Specification  Built-in power unit  Alarm Output  NPN open collector output, 20 mA (MAX) 
    Discontinued
  29. Static electricity removal blower
    AS ONE Static electricity removal blower
    As ONE Part Number  1-4968-01  Dimension (mm)  468×208×184  Mass (kg)  8.2 
    Discontinued
  30. Ion shower blow gun (AC type)
    BIC TOOL Ion shower blow gun (AC type)
    Compared to conventional products, it is smaller and lighter! Improved static elimination performance! Ion jet blow is even easier to use. It is a type that can be used with an AC100V power supply so that you can work for a long time in a certain place. Ideal for pretreatment of painting lines an... Read More
    Suitable Air Pressure (MPa)  0.4~0.8  Dimension (mm)  175×205×95  Mass (g)  400 (without AC adapter)  Power Input (V)  AC100 / DC6 (AC adapter)  Continuous Operating Time (hours)  About 3  Suitable Fluid  Compressed air  Static Elimination Method  DC corona discharge (± bipolar type) 
    Discontinued
  31. Gantlink battery type flat nozzle model
    TRINC Gantlink battery type flat nozzle model
    Designed to be easy to hold and less tiring to work. High static and dust removal performance and reliability Air gun type model. Battery-powered flat nozzle model Free from troublesome AC power cord (injects air and ions over a wide range above and below) Pre-painting process, packaging process,... Read More
    Type  Battery type flat nozzle model 
    Discontinued
  32. Air gun
    AS ONE Air gun
    As ONE Part Number  9-5021-01  Dimension (mm)  Unit 99 × 115 × 162 
    Discontinued
  33. Ion air compressor
    AS ONE Ion air compressor
    Discontinued
  34. Ionized Air Blow Gun
    3M Ionized Air Blow Gun
    It is very lightweight and you don't have to worry about static elimination work. An air gun type ionizer that can remove dust and static electricity at the same time. Not only the air gun body, but also the hose and console are equipped with anti-static measures. Static electricity removal. ... Read More
    Dimension (mm)  (Gun) 203 x 76 x 25  Air Flow  (Max) 65PSi  Suitable Air Pressure (MPa)  0.14~0.45  Operation Ambient Temperature (℃)  0~40  Trusco Part No.  163-1560  Hose Length (m)  2.1  Power Consumption (W)  32  Mass (g)  340  Power Input (V)  AC120  Static Elimination Method  DC method  Input Power  DC24V  Suitable for  Dry air or nitrogen  Ambient Humidity to Use  No condensation  Material (Hose)  Static dissipative polyurethane  Specification  Use air / dry air or nitrogen  Ion Balance  ± 30V or less 
    Discontinued
  35. Static blow gun
    HOZAN (HOZAN TOOL INDUSTRIAL) Static blow gun
    Two types of nozzles are standard equipment.
    static-elimination ability (sec)  1.3  Mass (kg)  1.5  Power Consumption (W)  30  Power Input (V)  AC100~240(50/60Hz)  Air Source  compressor  Hose Length (m)  Ion balance adjustment  +/- independent adjustment  Output Voltage  DC7kV±10%  Outside dimensions (width W x height H x depth D) (mm)  116 x 67 x 175 (station)  Power Cable (m)  1.65 
    Discontinued
  36. Ionizer
    AS ONE Ionizer
    As ONE Part Number  2-7727-01  Mass (g)  400 
    Discontinued
  37. Static elimination gun AEON Bazooka
    VESSEL Static elimination gun AEON Bazooka
    A compact and lightweight resin body with a built-in high-frequency piezoelectric transformer. Comes with high-brightness LED lighting that allows you to see dust. Since it is an AC corona discharge type, there is no loss of ion balance due to dirt on the needle. Equipped with a muffling nozzle t... Read More
    Input Power  DC24V±5%  Mass (g)  198  Current Consumption (mA)  74  Air Consumption (L/min [ANR])  194  Applied voltage (kV)  About AC2.0  Width (mm)  132  Trusco Part No.  401-3506  Height (mm)  152  Operation Ambient Temperature (℃)  5~40  Length (mm)  36  Range to Use (mm)  50 ~ (indoor non-hazardous area)  Suitable Air Pressure (MPa)  0.1~0.6  Set Contents  Power adapter (AC100-240V)  Static Elimination Method  High frequency AC corona discharge type 
    Discontinued
  38. Ionizer blow gun
    Sunhayato Ionizer blow gun
    Removes static electricity and dust at the same time. By corona discharging high-voltage alternating current and simultaneously injecting + -bipolar ions in a well-balanced manner, static electricity is instantly neutralized and eliminated. Ions are ejected just by pulling the trigger, and anyone... Read More
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 58

Set Ascending Direction