All Category

Silicone Heat Sink Compounds

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 55

Set Ascending Direction
  1. High hardness heat radiation silicone TC-CG
    Shin-Etsu Chemical High hardness heat radiation silicone TC-CG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Thermal Conductivity (W/mk)  (ISO 22007-2)1.7、(ASTME1530)1.9  Temperature Range (℃)  -40~180  Density (g/cm3 2.5  Hardness  90  Type  General  Color  Light reddish brown  Classification of the Hazardous  Non-dangerous goods  Specification  Reinforcing layer: Glass cloth  Flame Retardance  V-0 
    from S$47.99
    Min. 18 days
  2. EYG-S091207
    Panasonic EYG-S091207
    from S$23.99
    Min. 2 days
  3. Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-10
    Shin-Etsu Chemical Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-10
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  1.15  Specific heat (J / g ・ k)  1.24  Thermal Conductivity (W/mk)  1.8  Density (g/cm3 1.9  Hardness  10  Dimension (mm)  300×400  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0  Dielectric Breakdown Voltage (kV)  ≧30  Withstand Voltage (V)  ≧30 
    from S$299.90
    Min. 18 days
  4. EYGA091203M
    Panasonic EYGA091203M
    from S$28.99
    Min. 3 days
  5. Low hardness heat-radiating silicone rubber sheet
    Shin-Etsu Chemical Low hardness heat-radiating silicone rubber sheet
    A low-hardness heat-dissipating silicone pad that achieves both high thermal conductivity and electrical insulation through its unique polymer technology and filler compounding technology. Heat countermeasures for various electronic devices installed in laptop computers, LED lighting, hybrid vehi... Read More
    Hardness (Asker C)  10  Sheet Size (mm)  300×400  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$189.90
    Min. 18 days
  6. Ultra soft heat dissipation sheet
    BERGQUIST Ultra soft heat dissipation sheet
    It is a very soft heat dissipation sheet. With greater flexibility, it fills gaps between air gaps, rough surface electronic devices and heat sinks. It also has excellent electrical insulation and flame retardancy. Heat dissipation inside the personal computer. Heat dissipation between heat sinks... Read More
    Thermal Conductivity (W/mk)  Width (mm)  203  Length (mm)  406  Hardness  5(ASTMD2240)  Classification of the Hazardous  Non-dangerous goods  Material  Silicon  Flame Retardance  V-0(UL94) 
    from S$129.90
    Min. 13 days
  7. Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAT-20
    Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAT-20
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific density and can be used in a wide temperature range.
    Temperature Range (℃)  -40~180  Thermal resistance value (℃ / W)  0.32  Specific heat (J / g ・ k)  0.83  Withstand Voltage (V)  11  Dielectric Breakdown Voltage (kV)  15  Hardness  20  Density (g/cm3 3.2  Dimension (mm)  300×400  Thermal Conductivity (W/mk)  4.5  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$559.90
    Min. 18 days
  8. Ultra-low hardness heat radiation silicone sheet (one-sided adhesive) TC-SP-1.7
    Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (one-sided adhesive) TC-SP-1.7
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Thermal Conductivity (W/mk)  (ISO 22007-2)1.5、(ASTM E1530)1.7  Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  Specific heat (J / g ・ k)  1.04  Withstand Voltage (V)  16  Hardness  Density (g/cm3 2.3  Dielectric Breakdown Voltage (kV)  20  Dimension (mm)  300×400  Color  Grey / reddish brown  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0  Structure  composite 
    from S$379.90
    Min. 18 days
  9. High hardness heat radiation silicone TC-BG
    Shin-Etsu Chemical High hardness heat radiation silicone TC-BG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Thermal Conductivity (W/mk)  (ISO 22007-2)7.3、(ASTME1530)5  Temperature Range (℃)  -40~180  Density (g/cm3 1.5  Hardness  90  Type  High thermal conductivity  Classification of the Hazardous  Non-dangerous goods  Specification  Reinforcing layer: Glass cloth  Flame Retardance  V-0  Color  White 
    from S$229.90
    Min. 18 days
  10. EYG-S121803
    Panasonic EYG-S121803
    from S$29.99
    Min. 3 days
  11. EYG-A091207M
    Panasonic EYG-A091207M
    from S$39.99
    Min. 3 days
  12. Low hardness heat radiation silicone sheet (double-sided adhesive) TC-TXS2
    Shin-Etsu Chemical Low hardness heat radiation silicone sheet (double-sided adhesive) TC-TXS2
    It has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read More
    Temperature Range (℃)  -40~180  Thermal resistance value (℃ / W)  0.35  Specific heat (J / g ・ k)  0.83  Withstand Voltage (V)  17  Hardness  20  Dielectric Breakdown Voltage (kV)  21  Density (g/cm3 3.1  Thermal Conductivity (W/mk)  3.3  Dimension (mm)  300×400  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$639.90
    Min. 18 days
  13. Ultra-low hardness heat dissipation silicone sheet (double-sided adhesive) TC-SPA
    Shin-Etsu Chemical Ultra-low hardness heat dissipation silicone sheet (double-sided adhesive) TC-SPA
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Thermal Conductivity (W/mk)  (ISO 22007-2)2.3、(ASTM E1530)3  Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  0.42  Specific heat (J / g ・ k)  0.94  Density (g/cm3 2.4  Dimension (mm)  300×400  Hardness  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$269.90
    Min. 18 days
  14. High hardness heat radiation silicone TC-EG
    Shin-Etsu Chemical High hardness heat radiation silicone TC-EG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Thermal Conductivity (W/mk)  (ISO 22007-2)3.1、(ASTME1530)4.5  Temperature Range (℃)  -40~180  Density (g/cm3 3.1  Dimension (mm)  300×400  Relative Permittivity, 50Hz  6.5、(1kHz)6.5、(MHz)6.4  Hardness  95  Type  High thermal conductivity  Classification of the Hazardous  Non-dangerous goods  Color  Pale blue  Specification  Reinforcing layer: Glass cloth  Flame Retardance  V-0 
    from S$129.90
    Min. 18 days
  15. EYG-S091210DP
    Panasonic EYG-S091210DP
    from S$45.99
    Min. 3 days
  16. EYG-A121803M
    Panasonic EYG-A121803M
    from S$49.99
    Min. 3 days
  17. Ultra-low hardness heat radiation silicone rubber sheet
    Shin-Etsu Chemical Ultra-low hardness heat radiation silicone rubber sheet
    An ultra-low hardness heat-dissipating silicone pad that achieves both high thermal conductivity and electrical insulation through our unique polymer technology and filler compounding technology. Heat dissipation of LED, heat measures for hybrid cars, electric cars, laptop computers, power suppli... Read More
    Dielectric Breakdown Voltage (kV/mm)  20  Density (g/cm3 3.2/23℃  Sheet Size (mm)  300×400  Hardness (Asker C)  40  Thermal Conductivity (W/mk)  5.2  Color  Light purple  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$579.90
    Min. 18 days
  18. EYGS121807
    Panasonic EYGS121807
    from S$42.99
    Min. 2 days
  19. Heat radiation silicone tube type
    Shin-Etsu Chemical Heat radiation silicone tube type
    Thermal Conductivity (W/mk)  (ISO 22007-2)0.8、(ASTME1530)1.1  Thickness (mm)  0.45  Volume Resistivity (MΩ.m)  Thermal resistance value (℃ / W)  1.7  Elongation (%)  110  Dielectric Breakdown Voltage (kV)  15  Density (g/cm3 2.2  Relative Permittivity, 50Hz  4.8、(1kHz)4.8、(1MHz)4.7  Tensile Strength (MPa)  5.7  Tear Strength (kN/m)  Hardness  80  Withstand Voltage (kV)  Color  Dark blue  Type  General, tube  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$229.90
    Min. 18 days
  20. Low-hardness heat-radiating silicone sheet (double-sided adhesive) TC-TXS
    Shin-Etsu Chemical Low-hardness heat-radiating silicone sheet (double-sided adhesive) TC-TXS
    It has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read More
    Temperature Range (℃)  -40~180  Thermal resistance value (℃ / W)  0.4  Specific heat (J / g ・ k)  0.83  Withstand Voltage (V)  18  Thermal Conductivity (W/mk)  2.1  Dielectric Breakdown Voltage (kV)  20  Density (g/cm3 3.1  Dimension (mm)  300×400  Hardness  45  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$559.90
    Min. 18 days
  21. Low-hardness heat-radiating silicone sheet (one-sided adhesive) TC-TXE
    Shin-Etsu Chemical Low-hardness heat-radiating silicone sheet (one-sided adhesive) TC-TXE
    It has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read More
    Temperature Range (℃)  -40~180  Thermal resistance value (℃ / W)  0.48  Specific heat (J / g ・ k)  0.83  Hardness  20  Withstand Voltage (V)  20  Dielectric Breakdown Voltage (kV)  21  Density (g/cm3 3.1  Thermal Conductivity (W/mk)  3.3  Dimension (mm)  300×400  Color  Light blue / grey  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0  Structure  composite 
    from S$639.90
    Min. 18 days
  22. EYG-A091207V
    Panasonic EYG-A091207V
    Thickness (mm)  0.07  Dimension (mm)  115×90 
    from S$45.99
    Min. 3 days
  23. EYGS182307
    Panasonic EYGS182307
    from S$139.90
    Min. 3 days
  24. High-hardness heat-radiating silicone (with one-sided adhesive) TC-CG
    Shin-Etsu Chemical High-hardness heat-radiating silicone (with one-sided adhesive) TC-CG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Temperature Range (℃)  -40~180  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$79.99
    Min. 18 days
  25. Heat dissipation silicone cap type
    Shin-Etsu Chemical Heat dissipation silicone cap type
    Elongation (%)  100  Thermal Conductivity (W/mk)  Density (g/cm3 2.9  Tensile Strength (MPa)  Volume Resistivity (MΩ.m)  35  Tear Strength (kN/m)  Relative Permittivity, 50Hz  6.4、(1kHz)6.3、(1MHz)6.2  Hardness  75  Type  High thermal conductivity, cap  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$449.90
    Min. 18 days
  26. Panel board Mr. heat radiation silicon sheet
    Shin-Etsu Chemical Panel board Mr. heat radiation silicon sheet
    Just by sticking it on the control panel, you can suppress the temperature rise and bring it closer to the outside air temperature (factory temperature). Since a cooler for the control panel is not required, it prevents foreign substances such as metal, dust, dust, and oil mist from entering from... Read More
    Thermal Emissivity  (Heat radiation layer) 0.85 <  Classification of the Hazardous  Non-dangerous goods 
    Rating:
    100%
    from S$479.90
    Min. 24 days
  27. Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAB-30
    Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAB-30
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  0.64  Thickness (mm)  Specific heat (J / g ・ k)  1.13  Withstand Voltage (V)  11  Density (g/cm3 2.2  Thermal Conductivity (W/mk)  2.3  Dielectric Breakdown Voltage (kV)  22  Hardness  30  Dimension (mm)  300×400  Color  Light reddish brown  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$229.90
    Min. 18 days
  28. Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-30
    Shin-Etsu Chemical Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-30
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  0.87  Thickness (mm)  Specific heat (J / g ・ k)  1.24  Thermal Conductivity (W/mk)  1.8  Density (g/cm3 1.9  Withstand Voltage (V)  10  Dielectric Breakdown Voltage (kV)  22  Hardness  30  Dimension (mm)  300×400  Color  Gray  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0 
    from S$189.90
    Min. 18 days
  29. Heat dissipation silicone cap type
    Shin-Etsu Chemical Heat dissipation silicone cap type
    Thermal Conductivity (W/mk)  (ISO 22007-2)0.8、(ASTME1530)1.1  Volume Resistivity (MΩ.m)  Elongation (%)  110  Density (g/cm3 2.2  Relative Permittivity, 50Hz  4.8、(1kHz)4.8、(1MHz)4.7  Tensile Strength (MPa)  5.7  Tear Strength (kN/m)  Hardness  80  Color  Dark blue  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$379.90
    Min. 18 days
  30. Heat dissipation silicone cap type
    Shin-Etsu Chemical Heat dissipation silicone cap type
    Thermal Conductivity (W/mk)  (ISO 22007-2)1.8、(ASTME1530)1.5  Elongation (%)  100  Density (g/cm3 2.6  Volume Resistivity (MΩ.m)  3.2  Tensile Strength (MPa)  3.2  Relative Permittivity, 50Hz  Hardness  88  Tear Strength (kN/m)  9.8  Type  Medium heat conduction, cap  Classification of the Hazardous  Non-dangerous goods  Color  Reddish brown  Flame Retardance  V-0 
    from S$379.90
    Min. 18 days
  31. Hardens Heat Dissipation Silicone
    Sunhayato Hardens Heat Dissipation Silicone
    A one-component room temperature curing type silicone with high thermal conductivity that hardens and dissipates heat. Simply apply between the CPU and heatsink to improve thermal conductivity and secure. It has an appropriate viscosity and is excellent in workability.
    Dielectric Constant  (1MHz)4.1  Curing Conditions  (hr/℃)72/25・(hr/℃)24/25  Quantity of the Hazardous  0.009L  Thermal Conductivity (W/mk)  0.92  Volume Resistivity (Ωcm)  1.0×1015  Tack Free Time (Minutes)  20  Trusco Part No.  327-5329  Viscosity (Pa s)  85~108  Capacity (mL)  Classification of the Hazardous  Designated combustibles  Name of The Hazardous  Flammable liquids  Appearance  White paste 
    Rating:
    88%
    from S$18.99
    Min. 2 days
  32. High hardness heat radiation silicone sheet TC-15CG
    Shin-Etsu Chemical High hardness heat radiation silicone sheet TC-15CG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Temperature Range (℃)  -40~180  Thickness (mm)  0.2  Thermal resistance value (℃ / W)  0.37  Thermal Conductivity (W/mk)  1.5  Tear Strength (kN/m)  113  Density (g/cm3 2.6  Tensile Strength (MPa)  27  Dimension (mm)  320×1000  Withstand Voltage (kV)  Hardness  90  Color  Light reddish brown / grey  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$949.90
    Min. 18 days
  33. High-hardness heat-radiating silicone (with one-sided adhesive) TC-BG
    Shin-Etsu Chemical High-hardness heat-radiating silicone (with one-sided adhesive) TC-BG
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Temperature Range (℃)  -40~180  Dimension (mm)  200×260  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$639.90
    Min. 18 days
  34. Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAD-10
    Shin-Etsu Chemical Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAD-10
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Temperature Range (℃)  -40~180  Thermal resistance value (℃ / W)  0.74  Specific heat (J / g ・ k)  0.84  Hardness  10  Density (g/cm3 Thermal Conductivity (W/mk)  3.2  Dimension (mm)  300×400  Color  Light red purple  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0  Thickness (mm)  ≧1.5  Withstand Voltage (V)  ≧30  Dielectric Breakdown Voltage (kV)  ≧30 
    from S$569.90
    Min. 18 days
  35. Solidifies Heat Dissipation Silicone
    Sunhayato Solidifies Heat Dissipation Silicone
    A one-component room temperature curing type silicone with high thermal conductivity that hardens and dissipates heat. Simply apply between the CPU and heatsink to improve thermal conductivity and secure. It has an appropriate viscosity and is excellent in workability. Heat dissipation of semicon... Read More
    Viscosity (Pa s)  (When pasting) 85-108  Thermal Conductivity (W/mk)  0.92  Volume Resistivity (Ωcm)  1.0×1015  Specific Gravity  2.26  Specification  White paste 
    from S$299.90
    Min. 2 days
  36. Heat dissipation pad +HC5.0
    BERGQUIST Heat dissipation pad +HC5.0
    It has excellent thermal conductivity. A very soft material that fills the gap between the air gap, the rough surface of the electronic device and the heat sink. It also has excellent electrical insulation and flame retardancy. Heat dissipation inside the personal computer. Heat dissipation betwe... Read More
    Width (mm)  203  Hardness  35(ASTMD2240)  Length (mm)  406  Thermal Conductivity (W/mk)  Classification of the Hazardous  Non-dangerous goods  Material  Silicon  Flame Retardance  V-0(UL94) 
    from S$239.90
    Min. 10 days
  37. High hardness heat radiation silicone sheet TC-15TCI
    Shin-Etsu Chemical High hardness heat radiation silicone sheet TC-15TCI
    It has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read More
    Thermal Conductivity (W/mk)  (ISO22007-2)0.6、(ASTM E1530)1.2  Temperature Range (℃)  -40~180  Thickness (mm)  0.15±0.03  Thermal resistance value (℃ / W)  0.64  Withstand Voltage (kV)  10  Dielectric Breakdown Voltage (kV)  12  Density (g/cm3 2.2  Dimension (mm)  300×1000  Tensile Strength (MPa)  46  Elongation (%)  50  Tear Strength (kN/m)  60  Type  High voltage  Classification of the Hazardous  Non-dangerous goods  Color  Pink  Specification  Polyimide film  Flame Retardance  V-0 
    from S$539.90
    Min. 18 days
  38. Heat radiation silicone tube type
    Shin-Etsu Chemical Heat radiation silicone tube type
    Thermal Conductivity (W/mk)  (ISO 22007-2)0.8、(ASTME1530)1.1  Thickness (mm)  0.3  Volume Resistivity (MΩ.m)  Thermal resistance value (℃ / W)  1.2  Elongation (%)  110  Dielectric Breakdown Voltage (kV)  12  Density (g/cm3 2.2  Relative Permittivity, 50Hz  4.8、(1kHz)4.8、(1MHz)4.7  Tensile Strength (MPa)  5.7  Withstand Voltage (kV)  Tear Strength (kN/m)  Hardness  80  Color  Dark blue  Type  General, tube  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$159.90
    Min. 18 days
  39. Heat radiation silicone tube type
    Shin-Etsu Chemical Heat radiation silicone tube type
    Thermal Conductivity (W/mk)  (ISO 22007-2)0.8、(ASTME1530)1.1  Thickness (mm)  0.8  Volume Resistivity (MΩ.m)  Elongation (%)  110  Withstand Voltage (kV)  13  Density (g/cm3 2.2  Thermal resistance value (℃ / W)  2.6  Dielectric Breakdown Voltage (kV)  20  Relative Permittivity, 50Hz  4.8、(1kHz)4.8、(1MHz)4.7  Tensile Strength (MPa)  5.7  Tear Strength (kN/m)  Hardness  80  Color  Dark blue  Type  General, tube  Classification of the Hazardous  Non-dangerous goods  Flame Retardance  V-0 
    from S$369.90
    Min. 18 days
  40. Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAB-10
    Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAB-10
    Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.
    Temperature Range (℃)  -40~150  Thermal resistance value (℃ / W)  0.88  Specific heat (J / g ・ k)  1.13  Hardness  10  Density (g/cm3 2.2  Thermal Conductivity (W/mk)  2.3  Dimension (mm)  300×400  Color  Light reddish brown  Classification of the Hazardous  Non-dangerous goods  Structure  Single layer  Flame Retardance  V-0  Thickness (mm)  ≧1.5  Dielectric Breakdown Voltage (kV)  ≧30  Withstand Voltage (V)  ≧30 
    from S$449.90
    Min. 18 days
View : Grid List
Filter

Items 1 - 40 of 55

Set Ascending Direction