All Category

Lifting Clamps

A hanging clamp is a metal fitting that is used to lift and transport steel plates and steel frames. Depending on the application, there are various types of clamps. Clamps, which are mainly suitable for joining components such as work platforms, can be constructed and disassembled efficiently and safely compared to bolting and welding. The screw clamp suitable for lifting and transporting work has two suspension holes and can be used in all directions. The vertically suspended clamp is a mechanism that increases the grip force more firmly in proportion to the lifting load. In addition, stone-specific clamps can be securely grasped and suspended in thin or thick widths.
View : Grid List
Filter

Items 1 - 40 of 450

Set Ascending Direction
  1. Panel hanging clamp set (with spring-type tightening lock mechanism)
    SUPER TOOL Panel hanging clamp set (with spring-type tightening lock mechanism)
    Ideal for lifting wooden panels, especially two-by-four (2 x 4) residential panels, and for lifting and moving wooden beams. The spring-type tightening lock mechanism provides a secure grip for the clamp even when there is no load. A mechanism that increases the grip more firmly in proportion to ... Read More
    from S$779.90
    Min. 2 days
  2. Universal Clamp
    H.H.H. Mfg. Universal Clamp
    Due to the unique parallel function of the cover plate, the frictional force is strong and the load can be lifted without slipping. Since the cover plate is equipped with special urethane, the load can be lifted softly without damaging it. * If water, oil, powder, etc. adheres to it, it may slip,... Read More
    from S$299.90
    Min. 2 days
  3. Steel plate vertical clamp
    Eagle Clamp Steel plate vertical clamp
    A latch-type locking device (spring-type tightening mechanism) that works reliably. Strong automatic tightening mechanism by suspension load. Tighten with a force that is at least twice the suspension load. Grip force is proportional to suspension load. Do not damage the suspended load. Induction... Read More
    from S$559.90
    Min. 5 days
  4. For horizontal suspension (section steel) clamp GD-500 (3-20)
    Eagle Clamp For horizontal suspension (section steel) clamp GD-500 (3-20)
    Super strong type clamp with strong G type reinforcement, ideal for reversing. Horizontal fishing, horizontal fishing, construction, transportation reversal, rotation, welding, assembly, mounting, press processing, bending processing * Be sure to carry out inspections before starting work, and do... Read More
    Operating Load (ton)  (Maximum) 0.5  Operating Load (kg)  100~500  Mass (kg)  3.2  Clamping Width (mm)  3~20  Trusco Part No.  515-9415  Material  High tensile strength steel  Specification  ISO9001 certified factory 
    from S$949.90
    Min. 3 days
  5. Ironman
    SUPER TOOL Ironman
    Most suitable for connecting members of temporary structures such as work gantry. Compared to bolting and welding of structures, construction and demolition work is much faster and safer. The tip of the bolt is induction hardened and has a special design that firmly bites into the steel material.
    Rating:
    97%
    from S$29.99
    Min. 2 days
  6. Beam clamp standard type
    SUPER TOOL Beam clamp standard type
    It is ideal for fixing to beams (H-shaped steel and I-shaped steel), hooking hooks such as chain blocks and pulleys, and hanging them. Please use it at any site such as factories and construction as a metal fitting for connecting to the beam. It can be easily attached and detached by simply turni... Read More
    Specification  Left / Right screw type 
    Rating:
    96%
    from S$129.90
    Min. 2 days
  7. C type
    BULLMAN C type
    Quickly! Reliable! Economically! 1. Reduced work time: No special skills required and easy. The machine will shrink regardless of the weather. 2. No need for fire or electricity: No fire or electricity. It can be installed with confidence even in places where fire is strictly prohibited. 3. Recov... Read More
    Material  S45C forged products 
    Rating:
    60%
    from S$55.99
    Min. 2 days
  8. Screw Clamp
    ELEPHANT CHAIN BLOCK Screw Clamp
    Since it is a circular double cam lock system, a stronger tightening force is generated and safe work is possible. Work in all directions is possible with two hanging holes. It can also be used for sloping suspended loads such as I-beams. The lightest screw clamp in the industry. For lifting and ... Read More
    from S$299.90
    Min. 2 days
  9. Swivel type vertical hanging clamp
    SUPER TOOL Swivel type vertical hanging clamp
    A lightweight type that expands the hanging direction with clamps that are mainly used for vertical suspension of steel plates. The spring-type tightening lock mechanism ensures that the clamp grips even when there is no load. The shackle is an omnidirectional universal clamp that works in the di... Read More
    Type  Hanging 
    Rating:
    100%
    from S$459.90
    Min. 2 days
  10. Screw cam clamp (J type)
    SUPER TOOL Screw cam clamp (J type)
    Lightweight and compact type that is ideal for all kinds of work such as lifting, hanging, reversing, and pulling. With the tightening mechanism of the screw cam and arc-shaped cam (special spring type), the clamp holds a reliable grip even in the no-load state and has excellent vibration resista... Read More
    Material  Special alloy steel 
    Rating:
    90%
    from S$239.90
    Min. 2 days
  11. Bursetter Set iron plate with chain sling
    ELEPHANT CHAIN BLOCK Bursetter Set iron plate with chain sling
    By giving the tip a crowbar function, labor saving work can be done using crane power. The 180 degree swing of the wire or chain connection prevents excessive force from being applied to the suspension ring when pulling, reversing, or pulling down the suspended load. Comes with a tip crowbar func... Read More
    Chain Wire Diameter (Φmm)  10  Effective Length l (mm)  1500  Hook dimension g (mm)  155  aster link dimension b (mm)  16  Hook dimension e (mm)  27  Hook dimensions f (mm)  29  Basic Operating Load (ton)  3.2  Trusco Part No.  377-0818  Hook dimension c (mm)  76  Hook dimension d (mm)  78  Mass (kg)  8.7  master link dimension a (mm)  80  Specification  Safety factor 5 times or more  Material  Steel 
    Rating:
    100%
    from S$639.90
    Min. 2 days
  12. U-shaped groove hanging clamp cam type
    SUPER TOOL U-shaped groove hanging clamp cam type
    Switching to the open lock is easy with one-touch operation of the hook plate. The cam has excellent durability due to the new design that can be used in 4 places by replacing it. Lifting work for U-shaped, L-shaped, U-shaped flume, shelf boards, etc.
    Dimension H2 (mm)  260~492  Clamping Width (mm)  30~160  Dimension D (mm)  35  Dimension L (mm)  440  Dimension H (mm)  76  Specification  For 2-point suspension 
    Rating:
    96%
    from S$299.90
    Min. 2 days
  13. Concrete secondary product laying clamp (capacity adjustable)
    SUPER TOOL Concrete secondary product laying clamp (capacity adjustable)
    Ideal for laying and construction work such as U-shaped grooves, lids, curb materials, blocks, etc. The joint spacing can be easily set with the 9mm thickness of the clamp claw. Anti-slip design with toothed claws. Longitudinal both ends hanging clamp that does not interfere with the line. The cl... Read More
    Capacity (kg)  150  Clamping Width (mm)  400~600  Trusco Part No.  451-4874  Mass (kg)  Material  High tensile strength steel  Finish  Purple baking 
    Rating:
    100%
    from S$779.90
    Min. 2 days
  14. Beam clamp
    H.H.H. Mfg. Beam clamp
    It is manufactured to provide a connection point on the beam (H-shaped steel / I-shaped steel). Please use it as a connecting bracket with the beam for hanging chain blocks, hoists, etc., and for pulling lever hoists and pulleys sideways. Attaching and detaching to the beam is easy and quick just... Read More
    Rating:
    85%
    from S$159.90
    Min. 2 days
  15. Threaded Clamp (All Direction Type)
    Eagle Clamp Threaded Clamp (All Direction Type)
    World patented spherical rotary jaw type automatic tightening mechanism (omnidirectional type). Grasp the suspended load firmly with the spherical rotating jaw ・ Grip force is proportional to the suspended load. Double safety structure with screw type vise and automatic tightening mechanism. Twi... Read More
    Dimension P (mm)  150 
    from S$639.90
    Min. 2 days
  16. KT hanging bottle
    KONDOTEC KT hanging bottle
    Light weight and easy to carry and store. Since the suspension height is suppressed, it is easy to load on a truck in a warehouse with a low ceiling height. The hanging tool at the bottom of the main body can be changed, and it can also be used in combination with a grab hook or belt sling.
    RoHS directive (corresponding to 10 substances)  Length (m)  [Balance] 1 
    from S$259.90
    Min. 2 days
  17. U-shaped groove hanging clamp
    SUPER TOOL U-shaped groove hanging clamp
    Ideal for machines, U-shaped, U-shaped flumes, L-shaped panels, shelf boards, etc. (Urethane pad type) Urethane rubber pad type protects concrete and product damage. Switching to the release lock is easy with one-touch operation of the hook plate. A mechanism that increases the grip force more fi... Read More
    from S$269.90
    Min. 2 days
  18. Vertical suspension clamp with safety lock
    ELEPHANT CHAIN BLOCK Vertical suspension clamp with safety lock
    Comes with a safety lock that securely holds the locked state even if the suspended load lands and loosens. A standard type with a wide range of use that is convenient for vertical suspension and reversing work. Transportation work of iron plates and shaped steel. * When using on a flat plate, be... Read More
    Specification  With safety lock, for 2-point suspension 
    Rating:
    80%
    from S$449.90
    Min. 2 days
  19. Stone clamp
    H.H.H. Mfg. Stone clamp
    Since the structure is such that the plates are always parallel regardless of the opening width, it can be gripped reliably regardless of the thickness of the stone. Since it can be hung from thin to thick ones, there is no need to change the model for each stone width. However, when lifting a st... Read More
    Rating:
    100%
    from S$499.90
    Min. 2 days
  20. U-shaped groove hanging clamp (pad type)
    SUPER TOOL U-shaped groove hanging clamp (pad type)
    A versatile type that can hang various secondary concrete products, especially for pedestrian road boundary blocks and small L walls. Supports a wide clamp range by adjusting the pad position by replacing the toggle pin. The balance of the work is maintained by adjusting to the position of the ce... Read More
    Clamping Width (mm)  10~240 
    from S$479.90
    Min. 2 days
  21. Screw Cam Clamp (Double Eye Type)
    SUPER TOOL Screw Cam Clamp (Double Eye Type)
    With two lifting holes, it is a versatile type that can be used for all kinds of work such as lifting, hanging, sideways pulling, and reversing. With the tightening mechanism of the screw cam and arc-shaped cam (special spring type), the clamp holds a reliable grip even in the no-load state and h... Read More
    Rating:
    40%
    from S$449.90
    Min. 2 days
  22. 2-point lifting scale
    SUPER TOOL 2-point lifting scale
    A dedicated balance for safe and well-balanced lifting work. Balance for hanging panel for housing. * Since it is a textile product, there may be some errors in the dimensions.
    Material  Special steel 
    Rating:
    80%
    from S$399.90
    Min. 2 days
  23. Suspension clamp for concrete product laying (hand-machine type)
    Eagle Clamp Suspension clamp for concrete product laying (hand-machine type)
    The groove pig can be removed and installed by one person. It is a type that can be used for both hand suspension and machine suspension. U-shaped groove, lid, curb transportation, concrete block transportation, loading and unloading, laying, construction work. * Be sure to carry out inspections ... Read More
    Specification  For both hand and machine 
    Rating:
    100%
    from S$859.90
    Min. 2 days
  24. Renflow hole clamp
    Japan Clamp Renflow hole clamp
    Lightweight and compact. It can be lifted just by inserting it into the bolt hole. Removal is a one-touch type that just pulls up the release knob. Parts material for mountain retaining machines and cutting. Lifting using holes, such as lifting with flange holes.
    Mass (kg)  0.4  Basic Operating Load (ton)  0.7  Suitable Thickness of Workpiece (mm)  10~25  Dimension d (mm)  16  Dimension B (mm)  23  Applicable Hole Diameter (Φmm)  24~29  Trusco Part No.  273-0359  Dimension a (mm)  34  Dimension H (mm)  72  Specification  Latch lock type 
    Rating:
    100%
    from S$379.90
    Min. 2 days
  25. Panel / beam suspension clamp
    SUPER TOOL Panel / beam suspension clamp
    from S$479.90
    Min. 2 days
  26. Horizontal horizontal clamp
    SUPER TOOL Horizontal horizontal clamp
    Due to the action of the spring, there is no need to hold it by hand when the clamp is attached. Also, the clamp will not come off even when there is no load. It is a mechanism that the grip force increases more firmly in proportion to the lifting load. Easy safety inspection, with confirmation s... Read More
    Specification  Lower chin crack (2 split) type 
    Rating:
    100%
    from S$299.90
    Min. 2 days
  27. DL Type Hook
    MIKI NETSUREN DL Type Hook
    As it is stamped and forged, it is lightweight. Horizontal suspension transportation work
    Material  Special alloy steel 
    Rating:
    100%
    from S$159.90
    Min. 2 days
  28. Beam clamp deluxe type
    SUPER TOOL Beam clamp deluxe type
    It is ideal for fixing to beams (H-shaped steel and I-shaped steel), hooking hooks such as chain blocks and pulleys, and hanging them. Please use it at any site such as factories and construction as a metal fitting for connecting to the beam. It can be easily attached and detached by simply turni... Read More
    Specification  Left / Right screw type  Material  Special steel 
    from S$239.90
    Min. 2 days
  29. U-shaped groove hanging clamp lining type (pad type)
    SUPER TOOL U-shaped groove hanging clamp lining type (pad type)
    JIS reinforced concrete U-shaped, JIS lid-type U-shaped groove, information box U-shaped dedicated suspension clamp With U-shaped groove crack prevention holder. (Be sure to use it as a set with the main body.) The hanger does not come into contact with the thread, and there is no need for more s... Read More
    Mass (kg)  12  Trusco Part No.  451-4823  Capacity (kg)  500  Finish  Purple baking 
    from S$1,099.00
    Min. 2 days
  30. Drum lift clamp (vertical hanging)
    SUPER TOOL Drum lift clamp (vertical hanging)
    A dedicated clamp that can safely lift drums (diameter 500-700 mm) vertically and safely, making it ideal for transport work. A strong lock with a wedge method. Locking is as easy as pushing and pulling the grip. Lifting work of industrial drums. * Drums without lids cannot be lifted. Do not use ... Read More
    Basic Operating Load (ton)  0.5  Clamping Width (mm)  2~3.5  Trusco Part No.  331-0469  Dimension d (mm)  43  Dimension L (mm)  444  Dimension H (mm)  587  Dimension D2 (mm)  86  Mass (kg) 
    from S$799.90
    Min. 2 days
  31. Horizontally clamped lock handle type split type
    SUPER TOOL Horizontally clamped lock handle type split type
    Ideal for structural shaped steel (H-shaped, I-shaped, T-shaped, L-shaped steel, etc.) and horizontal (horizontal) suspension clamps for flat steel plates (two-point suspension of shaped steel in the longitudinal direction). The spring-loaded tightening lock mechanism ensures that the clamp grips... Read More
    from S$349.90
    Min. 2 days
  32. Formwork and panel suspension clamp
    SUPER TOOL Formwork and panel suspension clamp
    The clamp provides a secure grip even when there is no load. Urethane rubber is attached to one side so as not to damage the surface of the panel. Lifting work for formwork, wooden panels, and beams. * Please use a balance and strictly observe the use of 2 units / set.
    Basic Operating Load (ton)  0.10  Mass (kg)  1.8  Dimension L (mm)  120~180  Dimension H (mm)  139  Dimension d (mm)  26  Trusco Part No.  321-0430  Clamping Width (mm)  5~80  Dimension h2 (mm)  92  Clamp  Adjustment / 5 steps 
    Rating:
    100%
    from S$299.90
    Min. 2 days
  33. Screw cam clamp Double eye type Twist cam type
    SUPER TOOL Screw cam clamp Double eye type Twist cam type
    The operation of the circular cam can be confirmed by the mark. The mark has excellent visibility due to the phosphorescent coating. The circular cam tilts in proportion to the lifting load, and the contact surface becomes larger, providing a firm grip. There are two shackle mounting parts in the... Read More
    from S$479.90
    Min. 2 days
  34. 40-150mm / 500kg U-shaped groove hanging clamp set (2 pieces)
    ESCO 40-150mm / 500kg U-shaped groove hanging clamp set (2 pieces)
    Operating Load (ton)  0.5 (when using 2 units)  Clamping Width (mm)  40~150  Overall Length (mm)  470  Mass (kg)  6 / unit  Esco Part No.  EA984ED-5 
    from S$549.90
    Min. 2 days
  35. U-shaped groove hanging clamp pad type
    SUPER TOOL U-shaped groove hanging clamp pad type
    Switching to the open lock is easy with one-touch operation of the hook plate. A spike mechanism is used for the special rubber pad to securely clamp the suspended load. Lifting work for reinforced concrete U-shaped, single-walled U-shaped, U-shaped flume, concrete shelves, etc.
    Dimension H2 (mm)  264~467  Clamping Width (mm)  30~140  Dimension D (mm)  35  Dimension L (mm)  440  Dimension H (mm)  84  Specification  For intact type 2-point suspension 
    Rating:
    80%
    from S$369.90
    Min. 2 days
  36. Clamp for suspension chain KCM
    KONDOTEC Clamp for suspension chain KCM
    The main body is a stamped forged product, which is tough, beautiful in shape, and stable in quality even if the foot roller is made larger than the plate pressed product and rolled product. Since the hanging part is a large ring, it is easy to hang the chain, and a large hook "Shizuka"... Read More
    RoHS directive (corresponding to 10 substances)  Mass (g)  610 
    from S$479.90
    Min. 2 days
  37. Lifting Claw Hook
    Eagle Clamp Lifting Claw Hook
    A lightweight and durable nail hacker made by a special manufacturing method. Horizontal fishing transportation work. * Be sure to use two or more even numbers.
    from S$259.90
    Min. 2 days
  38. Screw cam clamp (universal type)
    SUPER TOOL Screw cam clamp (universal type)
    It is a universal type suspension clamp that can be used for horizontal suspension, vertical suspension, and reversal work of all things such as spherical plates and curved plates with screws. A simple all-purpose hanging clamp that is particularly effective for hanging steel materials with compl... Read More
    from S$459.90
    Min. 2 days
  39. Shaped steel clamp
    SUPER TOOL Shaped steel clamp
    Shaped steel (H type, I type, C type, L type, T type steel, etc.) Horizontal suspension clamp for structures When shaped steel is hung, it becomes almost horizontal, so workability is good. There is no need to hold it by wearing it when the clamp is attached by the action of the spring. Moreover,... Read More
    Type  Horizontal clamp  Material  Special alloy steel 
    Rating:
    90%
    from S$299.90
    Min. 2 days
  40. Vertical suspension clamp with latch type locking device
    Eagle Clamp Vertical suspension clamp with latch type locking device
    It is compact, lightweight, easy to use, and the locking device is a latch type that works reliably. It is a spring type tightening mechanism. Vertical suspension work for steel, shaped steel, etc. * Be sure to use it with two or more points suspended.
    Rating:
    90%
    from S$639.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 450

Set Ascending Direction