Tapes for Electronic / Circuit Board
Electronic and circuit board tapes are tapes designed to protect and bind electrical wiring. Superior heat resistance and electrical insulation than general tape. Polyimide, glass cloth, aluminum, ultra-high molecular weight polyethylene, Nomex paper, etc. are used for the base material, and silicone and acrylic are used for the adhesive. Among the products, there are electronic and circuit board tapes that are also excellent in tensile strength, solvent resistance, and chemical resistance.
Other Related Pages
Achilles Conductive strong adhesive tape IC tapeIt has excellent conductivity and transparency. For surfaces that require both transparency and conductivity, such as clean room glass and acrylic plates. Use as a replacement for cellophane tape to prevent static electricity, or as a packing tape for semiconductor devices that are sensitive to s... Read MoreThickness (mm) 0.069 Adhesive Force 4.0N / 10mm (vs stainless steel) Tensile Strength 40N/10mm Tape Length (m) 50 Specification A cutter is required for cutting Feature Conductivity Color Smoke translucentfrom S$779.90Min. 7 days- MonotaRO Polyimide Tape Insulation HeatHigh temperature support, insulation * Do not use for anything other than its intended purpose.Heat Resistance Temperature (℃) -5～250 Thickness (mm) 0.055 Adhesion Strength (N/25mm) 3.5～5.5 Length (m) 33 Tensile Strength (N/25mm) 80 Main Application For electrical insulation Feature High temperature resistance, insulation Base Material Polyimide Adhesive Silicon
- TERAOKA SEISAKUSHO Kapton Adhesive TapeA tape for electrical insulation and heat-resistant masking that is based on Kapton (polyimide film), which has excellent heat and cold resistance, mechanical properties, electrical properties, and chemical resistance, and is coated with a silicone-based adhesive. It can be used in various fields... Read MoreCore Diameter (mm) 75
- TERAOKA SEISAKUSHO Polyester Film Adhesive Tape No.631S # 25Excellent adhesive strength that prevents the terminal from peeling off even when wound around a coil. Has excellent heat resistance and insulation. UL standard certified product. (File No. E56086) UL temperature rating 130 ℃ UL746A CTI ≧ 600V Insulation of the outer and inner layers of the trans... Read MoreTape Thickness (mm) 0.05 Adhesion Strength (N/25mm) 12.26 Breakdown voltage (kV) 6 Elongation (%) 80 Tensile Strength (N/25mm) 95.6 Adhesive Acrylic Main Application For electrical insulation Feature Heat resistance, insulation Base Material Polyester film
- TERAOKA SEISAKUSHO Conductive Copper Foil Adhesive TapeHigh conductivity can be obtained stably in both the vertical direction (thickness direction) and both directions. Flame retardant (UL510 Flame retardant acquired) Can be soldered on the back. Shielded cables for electromagnetic waves for electronic devices, shielded switching transformers for co... Read MoreThickness of Base Material (mm) 0.035 Electrical Resistance (Ω/cm2) 0.04 Tape Thickness (mm) 0.07 Tape Length (m) 20 Adhesion Strength (N/10mm, Reference) 3.43 Core Diameter (mm) 76 Adhesion Strength (N/25mm) 8.85 Tensile Strength (N/25mm) 98.1 Adhesive Acrylic conductive Feature Conductive, flame retardant Color Dark brown Main Application For electric and electronic Base Material Rolled copper foil
- TERAOKA SEISAKUSHO Aluminum Foil Adhesive TapeFlame retardant (acquired UL510 flame retardant) Adhesive tape with acrylic adhesive applied to aluminum foil. Short rings for shielded cables for electromagnetic waves, shielded switching transformers for connectors, etc.Thickness of Base Material (mm) 0.05 Tape Thickness (mm) 0.08 Adhesion Strength (N/25mm [gf]) 14.71[1500] Tape Length (m) 20 Adhesion Strength (N/10mm, Reference) 5.88 Elongation (%) 7 Tensile Strength (N/25mm [kgf]) 80.9[8.3] Adhesive Acrylic Base Material Aluminum foil RoHS directive (corresponding to 10 substances) Correspondence Feature Flame retardance Main Application For electric and electronic
- TRUSCO Heat-resistant Glass Cloth TapeA glass cloth tape with an adhesive that has excellent heat resistance. It is equivalent to JIS standard heat resistant class H (180 ℃). It has excellent tensile strength and is suitable for various types of binding. For applications that require heat resistance and insulation. For protection and... Read MoreTape Thickness (mm) 0.2 Dielectric Breakdown Voltage (kV/mm) 11 Continuous Use Temperature (℃) 180 (H class equivalent) Tensile Strength (N/10mm) 200 Adhesive Strength (N/10mm) 3.8 Base Material Glass cloth Feature Heat resistance Adhesive Silicone type Color White
- TERAOKA SEISAKUSHO Conductive Aluminum Foil Adhesive TapeA highly functional tape that can be easily used to shield electromagnetic waves and remove static electricity. High conductivity can be obtained stably in both the vertical direction (thickness direction) and both directions. Flame retardant (acquired UL510 flame retardant) Shielded cables for e... Read MoreThickness of Base Material (mm) 0.050 Electrical Resistance (Ω/cm2) 0.08 Tape Thickness (mm) 0.085 Tape Length (m) 20 Adhesion Strength (N/10mm, Reference) 3.92 Tensile Strength (N/25mm) 80.9 Adhesion Strength (N/25mm) 9.81 Adhesive Acrylic conductive Base Material Aluminum foil Feature Conductive, flame retardant RoHS directive (corresponding to 10 substances) Correspondence Main Application For electric and electronic Type For electronic equipment Color Silver
- 3M Conductive Aluminum Foil Tape AL-50BTHigh conductivity in the thickness and surface directions Excellent shielding effect due to low contact resistance and conductivity of metal foil UL510 flame retardant certification (ULFILE, NO.E59505) that does not peel off under general use conditions due to high cohesive force adhesive For gro... Read MoreContact Resistance (Ω) (25×25)mm2/0.01 Tape Length (m) 3 Adhesive Strength (N/cm) 3.4 Adhesive Acrylic (conductive particle dispersion) Feature Conductive, flame retardant Main Application For electric and electronic Release Liner Silicone treated paper Adhesive thickness (mm) Silver / 0.08 Base Material Soft aluminum foil, 50um Tape Thickness, Include Release Liner (mm) White / 0.12
- Nitto (Nitto Denko) Ultra High Molecular Weight Polyethylene No.4430It has extremely high impact strength and is one of the best among plastics. Excellent chemical resistance. Excellent wear resistance. Excellent self-lubricating properties. Slide surface for various product filling and labeling machines. Vending machine sliding surface, guide rail wrapping. wash... Read MoreOperating Temperature Range 0～80℃ Tape Length (m) 10 Adhesive Strength (N/10mm) 5.45 Adhesive Acrylic Main Application For electric and electronic Base Material Ultra high molecular weight polyethylene Color White Specification With release liner
- 3M Heat-resistant Glass Cloth TapeA tape with excellent heat resistance equivalent to the heat resistance class H class (180°C). Good familiarity and excellent tensile strength. Insulation of heat-resistant wire connections.Tape Thickness (mm) 0.2 Tape Length (m) 10 Dielectric Breakdown Voltage (kV/mm) 11 Continuous Use Temperature (℃) 180 Tape Width (mm) 19 As ONE Part Number 2-1489-01 Tensile Strength (N/10mm) 200 Trusco Part No. 217-2801 Adhesive Strength (N/10mm) 3.8 Mass (g) 57 Main Application For electrical insulation Base Material Glass cloth Feature Heat resistance Adhesive Silicone type
- 3M Hyper soft heat dissipation sheet 5580HExcellent thermal conductivity. Since it is a non-silicone heat dissipation material, it does not generate siloxane gas. Because it is a soft material, it can follow the irregularities of chips and substrates. Due to its excellent adhesion, it reduces the thermal resistance of the adhesive surfac... Read MoreMain Application For electric and electronic Length (mm) 100 Width (mm) 100
- TERAOKA SEISAKUSHO Double-coated Kapton (R) Film Adhesive Tape NO.760H #25Uses a silicone-based adhesive with excellent high-temperature heat resistance. Silicone-based adhesives have the property that adhesive remains are unlikely to remain even after re-peeling. Since it uses a film separator, it has excellent smoothness on the adhesive surface. The double separator ... Read MoreTape Thickness (mm) 0.145 Adhesion Strength (N/25mm) 11.03 (~ stainless steel) Shear Adhesive Force (N/400mm2) 196.1 Tape Length (m) 20 Heat Resistance Temperature (℃) 200 RoHS directive (corresponding to 10 substances) Correspondence Adhesive First side. second side silicone type Main Application For electrical insulation Base Material Kapton film
- 3M Polyimide Tape PIA220Uses an adhesive that has high heat resistance and does not corrode copper. Especially for insulation applications that require heat resistance and thinness. For insulation of coils, transformers and capacitors. * Due to the characteristics of the product, there may be a gap between the tape body... Read MoreTape Thickness (mm) 0.05 Rated Temperature (℃) 220 Heat resistance classification 220℃ Adhesive Strength (N/10mm) 3.1 Tape Length (m) 33 Tensile Strength (N/10mm) 34.72 Elongation (%) 35 Dielectric Breakdown Voltage (kV) 5 Insulation Resistance (MΩ) >1×106 Adhesive Acrylic Color Brown Specification Flame retardant (UL510) Main Application For electrical insulation Feature Heat resistance, flame retardant Base Material Polyimide film
- 3M 3M Glass Cloth Tape 361It has heat resistance and the operating temperature range is -54 to 232°C. The tensile strength of the base material is tough. It has excellent heat resistance, solvent resistance, and flame resistance. For heat-resistant fixing such as duct seals. Peripheral masking during welding and polishing.Tape Thickness (mm) 0.19 Tensile Strength (N/10mm) 251 Adhesive Strength (N/10mm) 4.31 Base Material Glass cloth Adhesive Silicone type UL Standard UL510、F.A.R25.853(E124809) Color White
- 3M High Temperature Polyimide Tape 7413DElectronic circuit masking during soldering, etc. Tapes of different colors may be caught in the middle of the product, but this is called a splice that connects to a new product tape when the product tape ends in the middle, so there is no problem as a tape product.Tape Thickness (mm) 0.065 Adhesive Strength (N/cm) 2.4 Heat Resistance Temperature (℃) 260 Tape Length (m) 33 Elongation (%) 40 Tensile strength (N / cm) 46 Main Application For electric and electronic Feature Heat resistance Base Material Polyimide film (0.025mm thickness) Adhesive Silicon
- NICHIAS Insultex TapeThick glass tape for heat insulation. It can be easily installed in thin pipes and narrow spaces as a burn prevention and heat insulating material. Since it is thick and elastic, it also demonstrates excellent performance as a sealing material. For burn prevention, duct packing, damper seals, gen... Read MoreTape Length (m) 30 Heat Resistance Temperature (℃) 550 Material Heat resistant glass fiber Specification Plain weave
- ESCO Thermal Insulation Adhesive TapeOperating Temperature Range (℃) -29～93 Tape Length (m) 10 Tape Thickness (mm) 3 Feature Insulation
- AEROFLEX Aerotape (Aeroflex Heat Resistant Adhesive Tape)A type of heat insulating material that can be wrapped around a pipeline. Adhesive tape makes it easy to attach to flexible pipes with optimal adhesive strength. It can be used indoors and outdoors with high durability. Insulation adhesive tape made from the same special elastomer as Aeroflex tub... Read More
- TERAOKA SEISAKUSHO Copper Foil Adhesive TapeAdhesive tape with acrylic adhesive applied to copper foil. Flame retardant (acquired UL510 flame retardant) Short rings for shielded cables for electromagnetic waves, shielded switching transformers for connectors, etc.Thickness of Base Material (mm) 0.035 Tape Thickness (mm) 0.07 Tape Length (m) 20 Tensile Strength (N/25mm [kgf]) 245.2[25.0] Adhesion Strength (N/10mm, Reference) 3.92 Adhesion Strength (N/25mm [gf]) 9.81[1000] Adhesive Acrylic Base Material Electrolytic copper foil Feature Flame retardance Main Application For electric and electronic Gloss Yes
- 3M Conductive Single-sided Copper Foil Tape CU-35CHigh conductivity in the thickness and surface directions Excellent shielding effect due to low contact resistance and conductivity of metal foil UL510 flame retardant certification (ULFILE, NO.E59505) that does not peel off under general use conditions due to high cohesive force adhesive For gro... Read MoreContact Resistance (Ω) (25×25)mm2/0.005 Tape Length (m) 3 Adhesive Strength (N/cm) 3.5 Adhesive Acrylic (conductive particle dispersion) Feature Conductive, flame retardant Adhesive thickness (mm) Copper color / 0.07 Main Application For electric and electronic Release Liner Silicone treated paper Base Material Soft rolled copper foil, 35um Tape Thickness, Include Release Liner (mm) White / 0.12
- TERAOKA SEISAKUSHO Kapton adhesive tape NO.652S #25Has excellent high temperature heat resistance. Silicone-based adhesives have the property that adhesive residue does not easily remain even after re-peeling. UL standard certified product. (File No. E56086) Flame Retardant UL510 Flame retardant UL Temperature Rating 200 ℃ For insulation and fixi... Read MoreTape Thickness (mm) 0.07 Tensile Strength (N/25mm) 122.6 Heat Resistance Temperature (℃) 200 Tape Length (m) 30 Elongation (%) 50 Breakdown voltage (kV) 7 Adhesion Strength (N/25mm) 7.35 (vs stainless steel) RoHS directive (corresponding to 10 substances) Correspondence Base Material Kapton film Adhesive Silicone type
- TERAOKA SEISAKUSHO Glass cloth adhesive tape NO.540SHas excellent heat resistance and insulation. Has excellent mechanical strength. UL standard certified product. (File No. E56086) Flame Retardant UL510 Flame retardant UL Temperature Rating 200 ℃ Insulation and protection of hot parts and parts. Insulation and protection of edges and parts. Insul... Read MoreTape Thickness (mm) 0.18 Heat Resistance Temperature (℃) 200 Breakdown voltage (kV) 3 Tape Length (m) 30 Elongation (%) 5 Tensile Strength (N/25mm) 612.9 Adhesion Strength (N/25mm) 8.58 (for stainless steel) Base Material Glass cloth Feature Heat resistance, flame retardant Adhesive Silicone type
- 3M Conductive Copper Foil Embossed Tape 2245High conductivity in the thickness and surface directions Excellent shielding effect due to low contact resistance and conductivity of metal foil UL510 flame retardant certification (ULFILE, NO.E59505) that does not peel off under general use conditions due to high cohesive force adhesive For gro... Read MoreContact Resistance (Ω) (25×25)mm2/0.005 Tape Length (m) 3 Adhesive Strength (N/cm) 3.4 Adhesive Acrylic Feature Conductive, flame retardant Adhesive thickness (mm) Copper color / 0.1 Main Application For electric and electronic Release Liner Silicone treated paper Base Material Soft copper foil, 35um Tape Thickness, Include Release Liner (mm) White / 0.08
- Nitto (Nitto Denko) Polyester Adhesive TapeThis tape was developed for inter-layer / exterior insulation of transformers and coils. Has excellent electrical insulation. Has excellent dimensional stability. Has excellent heat resistance. (Normal operating temperature 120 ° C) For electrical insulation of transformer coils. * Core diameter:... Read MoreOperating Temperature Range (℃) -30～120 Tape Thickness (mm) 0.053 Tensile Strength (N/19mm, Reference) 115 Tensile Strength (N/25mm) 151 Adhesive strength (N / 19mm) 5.6 Tape Length (m) 50 Adhesion Strength (N/25mm) 7.3 Adhesive Acrylic Color Clear Main Application For electrical insulation Feature Heat-resistant Base Material Polyester film
- Nitto (Nitto Denko) holding tapeFor holding parts such as electrical products and office equipment, and for temporary fixing. Less contaminated on the adherendTape Length (m) 50 Color Light blue Base Material Polyester Adhesive Rubber type
- TERAOKA SEISAKUSHO Kapton (R) Film Adhesive TapeA tape for electrical insulation and heat-resistant masking that is based on Kapton (polyimide film), which has excellent heat and cold resistance, mechanical properties, electrical properties, and chemical resistance, and is coated with a silicone-based adhesive. It can be used in various fields... Read MoreTape Width (mm) 10 Tape Length (m) 20 Heat Resistance Temperature (℃) 200 RoHS directive (corresponding to 10 substances) Correspondence Main Application For electric and electronic Base Material PI (Polyimide) Adhesive Silicon Flame Retardance UL510 approved product
- MonotaRO Glass tape plain weaveExcellent heat insulation and flexibility Non-adhesive type Asbestos tape alternatives For ships, automobiles, motorcycles, plants, rubber hose coatings, boiler packing, steel pipe insulation, etc. *Do not inhale dust. Be careful of scattering dust. *Wear appropriate protective equipment, protect... Read MoreBase Material 100% glass fiber Tape Length (m) 30 Tape Width (mm) 50 Heat Resistance Temperature (℃) 550 Feature Insulation, flexibility Weaving Type Plain weave Color White
- TERAOKA SEISAKUSHO Splicing tape NO.642Has excellent holding power and does not easily shift. For connecting separators and films.Tape Thickness (mm) 0.055 Tape Length (m) 50 Adhesion Strength (N/25mm) 6.86 (against stainless steel) Color Blue RoHS directive (corresponding to 10 substances) Correspondence Base Material Polyester film Adhesive Silicone type
- TERAOKA SEISAKUSHO Conductive Aluminum Foil Double-sided TapeHigh conductivity can be obtained both in the vertical direction (thickness direction) and in the planar direction. Since a special conductive adhesive is used, high conductivity can be stably obtained. Fixing static electricity removal and ground removal electricity brushes for electronic equipmentThickness of Base Material (mm) 0.020 Tape Thickness (mm) 0.13 Electrical Resistance (Ω/cm2) 0.5 Adhesion Strength (N/25mm) 14.71 Tape Length (m) 20 Shear adhesive strength (N[kgf]/4cm 2 ) 441.3[45] Adhesion Strength (N/10mm, Reference) 5.88 Core Diameter (mm) 76 Adhesive Acrylic conductive Base Material Aluminum foil Feature Conductivity Main Application For electric and electronic
- TERAOKA SEISAKUSHO Conductive copper foil double-sided tapeHigh conductivity can be obtained in both the vertical direction (thickness direction) and the surface direction. Since a special conductive adhesive is used, high conductivity can be obtained stably. Has excellent thermal conductivity. Static electricity removal for electronic devices, grounding... Read MoreElectrical Resistance (Ω/cm2) 0.02 Thickness of Base Material (mm) 0.035 Tape Thickness (mm) 0.09 Tape Length (m) 20 Shear adhesive strength (N[kgf]/4cm 2 ) 490.3[50] Adhesion Strength (N/10mm, Reference) 5.26 Core Diameter (mm) 76 Adhesion Strength (N/25mm) 8.58 Adhesive Acrylic conductive Feature Conductivity RoHS directive (corresponding to 10 substances) Correspondence Color Dark brown Main Application For electric and electronic Base Material Rolled copper foil
- Chukoh (Chukoh Chemical Industries) Glass Cloth Adhesive TapeAdhesive tape with excellent heat resistance. Equivalent to heat-resistant category H (180 ° C). The core diameter is as large as 3 inches, making it easy to grip. The glass fiber is less likely to fall off. Insulation of electrical equipment. Temporary fixing and protection under high temperatur... Read MoreTape Thickness (mm) 0.2 Tape Length (m) 10 Continuous Use Temperature (℃) 180 Maximum Operating Temperature (℃) 200 Tensile Strength (N/10mm) 280 Adhesive Strength (N/10mm) 4 Dielectric Breakdown Voltage (kV) 6 RoHS directive (corresponding to 10 substances) Correspondence Feature Heat-resistant Color White
- Nitto (Nitto Denko) Ultra High Molecular Weight Polyethylene No4430 (Black)It has extremely high impact strength and is one of the best among plastics. Excellent chemical resistance. Excellent wear resistance. Excellent self-lubricating properties. Slide surface for various product filling and labeling machines. Vending machine sliding surface, guide rail wrapping. wash... Read MoreOperating Temperature Range 0～80℃ Tape Length (m) 10 Adhesive Strength (N/10mm) 5.3 Adhesive Acrylic Color Black Main Application For electric and electronic Base Material Ultra high molecular weight polyethylene Specification With release liner
- maxell Conductive Copper Foil TapeIt enables conductivity with the adherend, and conductivity can be obtained in the thickness direction and the length direction. Punching is also possible. A cutter is required for cutting. electromagnetic shield. antistatic. switch parts.Operating Temperature Range (℃) -10～130 Thickness of Base Material (mm) 0.035 Tape Thickness (mm) 0.08 Tape Length (m) 20 Adhesive Strength (N/10mm) 4.7 Tensile Strength (N/10mm) 62.7 Color Bronze Adhesive Conductive acrylic Feature Conductivity Base Material Rolled copper foil Gloss Yes
- TERAOKA SEISAKUSHO Polyester film adhesive tape NO.646S # 25Has excellent chemical resistance and solvent resistance. There is almost no adhesive residue even after re-peeling. Resin sealing during plastic molding, electrical insulation, masking, fixing of silicone members.Tape Thickness (mm) 0.055 Tape Length (m) 33 Adhesion Strength (N/25mm) 7.52 (to stainless steel) Elongation (%) 80 Tensile Strength (N/25mm) 95.6 Feature Chemical resistance, solvent resistance RoHS directive (corresponding to 10 substances) Correspondence Main Application For electrical insulation Base Material Polyester film Adhesive Silicone type Color Transparent
- TERAOKA SEISAKUSHO Polyester Film Adhesive Tape No.631S # 12Excellent adhesive strength that prevents the terminal from peeling off even when wound around a coil. Has excellent heat resistance and insulation. UL standard certified product. (File No. E56086) UL temperature rating 130 ℃ Insulation of the outer and inner layers of the transformer. Insulation... Read MoreTape Thickness (mm) 0.03 Tape Length (m) 30 Tensile Strength (N/25mm) 39.2 Breakdown voltage (kV) 4 Adhesion Strength (N/25mm) 8.58 (for stainless steel) Elongation (%) 80 Adhesive Acrylic Main Application For electrical insulation Feature Heat resistance, insulation Base Material Polyester film
- SAXIN New Light Adhesive Tape (NL-W)Newlite adhesive tape is an industrial tape made from ultra-high molecular weight polyethylene. The wear resistance of Newlite adhesive tape is significantly superior to that of fluororesin, nylon, and many other tapes, and it is extremely excellent because it has a low coefficient of friction an... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Color Milky white layer thickness [Adhesive layer] 0.14
- Nitto Denko (Former Permacel) Kapton tape for electrical insulation (Heat resistance class 180°C/H class)Kapton film can withstand continuous high heat and high voltage, is thin and very familiar, has excellent abrasion resistance and is hard to tear. The adhesive used is a silicone-based adhesive with excellent solvent resistance and heat resistance. Bundling of high heat resistant wires, insulatio... Read MoreCuring Conditions (Heat curing) 205 ° C / 3 hours Tape Thickness (mm) 0.069 Electric Corrosion Coefficient 1.0 Heat Resistance Temperature (℃) 180℃ Insulation Resistance (MΩ) 1×106 Base Material 25 micron Kapton film Tape Length (m) 33 Elongation (%) 60 Tensile Strength (N/10mm) 63 Withstand Voltage 7500V Color Amber Main Application For electrical insulation Feature Heat resistance MIL standard MIL-P-46112 Adhesive Silicone typefrom S$74.99Min. 2 days
- KYOWA HARMONET Shield cloth tapeA tape that uses flame-retardant shielding conductive cloth plated with copper and nickel. A reliable shielding effect can be obtained because a conductive adhesive is also used on the adhesive surface. It is flexible and fits what you stick it on. UL510 (FR) certified product. Power cable, shiel... Read MoreLength (m) 1 Feature Conductivity RoHS directive (corresponding to 10 substances) Correspondence
-
