All Category

Face-to-face Specification

View : Grid List
Filter

24 Item(s)

Set Ascending Direction
  1. Stainless pipe socket
    ROYAL Stainless pipe socket
    RoHS directive (corresponding to 10 substances)  Correspondence  Color  Stainless hairline 
    from S$9.99
    Min. 2 days
  2. Stainless rod hook
    ROYAL Stainless rod hook
    Thickness (mm)  (U-shaped) 3.0  RoHS directive (corresponding to 10 substances)  Correspondence  Material  SUS304  Color  Stainless hairline 
    from S$6.69
    Min. 2 days
  3. Pipe socket
    ROYAL Pipe socket
    Claw bolt (6TS) can be used (however, reinforcement with a commercially available 6M nut is required) Can be used with PS washer cover set (PSS / PSR) for vertical movement of pipes With 8Φ dish processing (only for nominal 25 to 32, with nail hole processing for detent on the washer) Support bra... Read More
    Thread Pitch (mm)  1.0  Material  Brass grind  Screw size  M6  Suitable Screw  Shaft diameter 4mm countersunk screw 
    from S$4.69
    Min. 2 days
  4. Stainless steel hanger bracket
    ROYAL Stainless steel hanger bracket
    Thickness (mm)  3.0  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  Only for SUS-SB-24  Material  SUS304  Color  Stainless hairline 
    from S$13.99
    Min. 6 days
  5. S bar socket bracket
    ROYAL S bar socket bracket
    Thickness (mm)  2.6, (claw) 3.0  Material  Steel 
    from S$6.69
    Min. 17 days
  6. S Bar Cap 24
    ROYAL S Bar Cap 24
    Insertable end parts. For both ends treatment of S bar (SB-24), driving type flat lid (for cosmetics)
    Material  ABS resin 
    from S$2.19
    Min. 6 days
  7. S bar 32
    ROYAL S bar 32
    Installation of S-bar mounting type face parts. Square pipe for horizontal display of hangers (However, when mounting S-bar mountable face parts, the supporting metal fittings must be products that support torsional load) * With Z processing (drilling) (However, if cut, the Z processing on the cu... Read More
    Applicable Pipe Thickness (mm)  1.6  Suitable Pipe Diameter (Φmm)  14×32  Dimension (mm)  900  Material  Steel 
    from S$18.99
    Min. 7 days
  8. Stainless touch stopper
    ROYAL Stainless touch stopper
    Nominal Size  24  Size  24  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  Only for SUS-SB-24  Color  Stainless hairline 
    from S$6.69
    Min. 6 days
  9. S bar 24
    ROYAL S bar 24
    Installation of S-bar mounting type face parts. Square pipe for horizontal display of hangers (However, when installing S-bar mountable face parts, the supporting metal fittings must be products that support torsional load) * With Z processing (drilling) (However, if cut, the Z processing on the ... Read More
    Material  Steel (pipe standard 14 × 24 × 1.6t)  Length (mm)  900 
    from S$15.99
    Min. 6 days
  10. S bar 24
    ROYAL S bar 24
    Installation of S-bar mounting type face parts. Square pipe for horizontal display of hangers (However, when installing S-bar mountable face parts, the supporting metal fittings must be products that support torsional load) * With Z processing (drilling) (However, if cut, the Z processing on the ... Read More
    Material  Steel (pipe standard 14 × 24 × 1.6t)  Length (mm)  1200 
    from S$19.99
    Min. 6 days
  11. Fit quick bracket
    ROYAL Fit quick bracket
    For both glass shelf installation and wooden shelf board installation (glass shelves are designed to fit inside the arm bracket, and the wooden shelf board is fitted into the part where the cushion material at both ends of the arm bracket is removed, so it is necessary to perform groove processin... Read More
    Thickness (mm)  1.6  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Glass shelf and wooden shelf combined  Material  Steel  Included Accessories  cushion 
    from S$8.79
    Min. 6 days
  12. Glass holder for FQB
    ROYAL Glass holder for FQB
    Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from S$1.89
    Min. 6 days
  13. Q hanger (for square pipe)
    ROYAL Q hanger (for square pipe)
    Thickness (mm)  (Claw) 3.0  Nominal Size  1424  Size  1424  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  Set screw  Material  Zinc die-cast, (nail) steel 
    from S$11.99
    Min. 6 days
  14. Quick Bracket
    ROYAL Quick Bracket
    Finish  Chrome  Thickness (mm)  Claw: 3.0  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel, transparent polycarbonate  Included Accessories  cushion 
    from S$11.99
    Min. 5 days
  15. Q hanger (for round pipe)
    ROYAL Q hanger (for round pipe)
    Thickness (mm)  (Claw) 3.0  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  Set screw  Material  Zinc die-cast, (nail) steel 
    from S$10.99
    Min. 6 days
  16. For FQB (with pipe corner guard) 10 pieces
    ROYAL For FQB (with pipe corner guard) 10 pieces
    Thickness (mm)  1.0  Material  SUS430 
    from S$2.69
    Min. 17 days
  17. Quick hanger
    ROYAL Quick hanger
    Thickness (mm)  (Claw) 3.0  Included Accessories  Set screw  Material  Zinc die-cast, (nail) steel 
    from S$9.99
    Min. 17 days
  18. S bar socket
    ROYAL S bar socket
    Thickness (mm)  2.6  Color  Chrome  Material  Steel 
    from S$3.59
    Min. 6 days
  19. H bar catcher
    ROYAL H bar catcher
    Color  Stainless steel 
    from S$0.91
    Min. 6 days
  20. PS washer cover set
    ROYAL PS washer cover set
    Material  Brass sawing  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$5.69
    Min. 6 days
  21. H bar unit 25Φ
    ROYAL H bar unit 25Φ
    Thickness (mm)  (Claw) 3.0  Included Accessories  Set screw  Material  Steel special steel 
    from S$29.99
    Min. 17 days
  22. Quick bracket
    ROYAL Quick bracket
    Thickness (mm)  (Claw) 3.0  Material  Steel 
    Discontinued
  23. J holder holder for quick bracket 10 pieces
    ROYAL J holder holder for quick bracket 10 pieces
    Material  Polycarbonate  Color  Transparent resin 
    Discontinued
  24. Glass set for quick brackets 2 left and right set (4 total)
    ROYAL Glass set for quick brackets 2 left and right set (4 total)
    Thickness (mm)  1.0  Color  Chrome  Material  Steel  Included Accessories  Suction cup, M5 screw, cushion 
    Discontinued
View : Grid List
Filter

24 Item(s)

Set Ascending Direction