All Category

Face out Hangers

View : Grid List
Filter

Items 1 - 40 of 88

Set Ascending Direction
  1. R face out bracket 25
    ROYAL R face out bracket 25
    R type bracket Automatic lock type Retaining standard equipment Face out guard (FOC) Name 25 can be installed Face parts for hanger display that are directly attached to the foundation columns for installation systems such as slit hole-mounted shelves. * Retaining RPK cannot be used
    Thickness (mm)  (Claw) 3.0  Pipe Dimensions (mm)  Φ25.4  Color  Chrome  Offset Angle (°)  (Arm bracket) 0.75 up  Material  Steel, (tip lid) ABS resin  Wall Thickness (mm)  1.2, (claw steel) 2.6  Size (mm)  (Dowel) Φ5 × 12  Suitable for  (Stabilizer) SL 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  2. Slim slope hook
    ROYAL Slim slope hook
    Thickness (mm)  (U-shaped) 2.0  Wire Diameter Φ(mm)  Suitable for  SLB-14  Material  Steel 
    from S$7.69
    Min. 17 days
  3. Royal rod hook chrome
    ROYAL Royal rod hook chrome
    * For the load, use the Royal S bar. When used at 90 cm intervals. * When the screw is working with the base completely. * The safe load is a reference value. Please use it after confirming the condition and situation. In addition, we cannot guarantee the load.
    from S$1.89
    Min. 2 days
  4. S Bar Cap Chrome
    ROYAL S Bar Cap Chrome
    Both ends processing of the square bar SB-24. It is a driving type flat lid. A hook panel for square bars can be used.
    Material  ABS resin  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$2.19
    Min. 2 days
  5. Royal S Bar Panel Bracket Chrome
    ROYAL Royal S Bar Panel Bracket Chrome
    Safe load → Measured on one side (static load with bracket fixed to support) * The above load uses Royal Support ASF-1. When used at 90 cm intervals. * When the screw is working with the base completely. * When using support AWF-5, it will be 50% of the above load. * The safe load is a reference ... Read More
    Rating:
    100%
    from S$4.69
    Min. 2 days
  6. R face out inclined hanger
    ROYAL R face out inclined hanger
    Face parts for hanger display (slope 6-series hanging type) that can be directly attached to the foundation support for installation systems such as slit hole-mounted shelves. R type bracket Automatic lock type retaining standard equipment Retaining RPK cannot be used Face out guard (FOC) Name 13... Read More
    Pipe Diameter (Φmm)  13  Color  Chrome  Inclination angle (°)  25  Suitable for  Steady rest: SL 
    from S$16.99
    Min. 2 days
  7. S burst upper
    ROYAL S burst upper
    Insertable end parts For both ends treatment of S bar (SB-24 / SB-32), lid with driving type spill prevention plate (for makeup and fall prevention such as hooks)
    Material  Zinc die casting 
    from S$3.69
    Min. 2 days
  8. Rod hooks rope bracket type 6Φ
    ROYAL Rod hooks rope bracket type 6Φ
    R type bracket automatic lock type retaining as standard equipment Face parts for hanger display (slope 6-series hanging type) that can be directly attached to the foundation support for installation systems such as slit hole-mounted shelves. * Retaining RPK / POS cannot be used
    Thickness (mm)  (Claw steel) 3.0  Size (mm)  (Dowel) Φ4 × 10  Suitable for  (Stabilizer) SL  Inclination angle (°)  25  Wire Diameter Φ(mm)  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel  Included Accessories  Suspension 
    Rating:
    80%
    from S$9.29
    Min. 2 days
  9. V Face Out Hanger Single 19Φ
    ROYAL V Face Out Hanger Single 19Φ
    Thickness (mm)  (U-shape) 2.6  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from S$9.29
    Min. 6 days
  10. R face out bracket 19
    ROYAL R face out bracket 19
    Thickness (mm)  (Claw) 3.0  Material  (Nail) Steel special steel  Color  Chrome  Applicable Dimensions (mm)  Round pipe Φ19.1 × 1.6t 
    from S$9.69
    Min. 6 days
  11. S hanger bracket A-192S
    ROYAL S hanger bracket A-192S
    A type bracket only Dimension 0-4 compatible Automatic lock type retaining standard equipment Pipe steady rest (NPL) standard equipment Nominal 50 is limited to Dimension 0-4 only Arm metal fittings for mounting S bar 24 (SB-24) of the installation system such as slit hole hanging type shelves (c... Read More
    Suitable for  (Nail-side steady rest) SL  Thickness (mm)  3t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$5.39
    Min. 6 days
  12. S hanger bracket A-183S
    ROYAL S hanger bracket A-183S
    Only size 0-4 compatible Automatic lock type retaining standard equipment A type bracket steady rest (NPL) standard equipment (However, if you want to use the steady rest on the claw side as well as for the tip pipe, you need to purchase SL separately) Nominal 50 is limited to 0-4 dimensions only... Read More
    Thickness (mm)  3t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$5.29
    Min. 2 days
  13. V Face Out Hanger Single Chrome
    ROYAL V Face Out Hanger Single Chrome
    For hanger front display (horizontal single type) A hook panel for square bars can be used. * Please fix with screws
    Pipe Diameter (Φmm)  12.7  Finish  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from S$8.79
    Min. 2 days
  14. R face out bracket 13
    ROYAL R face out bracket 13
    Thickness (mm)  (Claw) 3.0  Material  (Nail) Steel special steel  Color  Chrome  Applicable Dimensions (mm)  Round pipe Φ12.7 × 1.6t 
    from S$7.69
    Min. 6 days
  15. R face out inclined hanger
    ROYAL R face out inclined hanger
    Color  Chrome 
    from S$19.99
    Min. 2 days
  16. Touch stopper
    ROYAL Touch stopper
    Insertable end parts For both ends treatment of S bar, lid with driving type spill prevention plate (for makeup and fall prevention such as hooks) * Z processing is required for the mating pipe
    Material (leaf spring)  Stainless steel  Material (Lid)  Steel (3.2t) 
    from S$3.59
    Min. 2 days
  17. Rod hook ten-hand type 6Φ (for stickers)
    ROYAL Rod hook ten-hand type 6Φ (for stickers)
    Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  SB-24・32  Material  Steel  Included Accessories  stopper  Wire rod (mm)  Φ6 
    from S$4.79
    Min. 6 days
  18. Little bracket LS-05S
    ROYAL Little bracket LS-05S
    Only size 0-4 compatible Automatic lock type retaining standard equipment Arm metal fittings for mounting S bar 24 (SB-24) of the installation system such as slit hole hanging type shelves (corresponding to the torsional load of S bar mounting type face parts) * Not suitable for use with pecker t... Read More
    Thickness (mm)  3.0t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$3.39
    Min. 6 days
  19. Slim bar
    ROYAL Slim bar
    Applicable Dimensions (mm)  Square pipe 14 × 14 × 1.2t  Material  Steel 
    from S$10.99
    Min. 17 days
  20. Little bracket LS-03S
    ROYAL Little bracket LS-03S
    Only size 0 to 4 compatible Automatic lock type retaining standard equipment No up angle of arm bracket (however, notch part is increased by 2.5 degrees) Arm metal fittings for mounting S bar 32 (SB-32) in a slit hole mounting type shelf installation system (corresponding to the torsional load of... Read More
    Thickness (mm)  3.0t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$3.39
    Min. 6 days
  21. Rod hook rope up type
    ROYAL Rod hook rope up type
    Included Accessories  M5 screw  Material  Steel  Wire rod (mm)  Φ6 
    from S$9.79
    Min. 17 days
  22. Royal S Bar Bracket Chrome
    ROYAL Royal S Bar Bracket Chrome
    Safe load → Measured on one side (static load in the normal state where the bracket is nationally defined for the support) * The above load uses Royal Support ASF-1. When used at 90 cm intervals. * When the screw is working with the base completely. * When using support AWF-5, it will be 50% of t... Read More
    Material  Steel chrome plating 
    from S$8.49
    Min. 6 days
  23. Pipe guard film (for S bar)
    ROYAL Pipe guard film (for S bar)
    The pasted part will be in a glossy state. Abrasion resistance to prevent the paint film from peeling off due to impact or friction when attaching or detaching the hanger in the painted finish of S bar (including the one with clear coating on the plating, all surface treatment colors except chrom... Read More
    Thickness (mm)  0.2  Width (mm)  25  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Non-vinyl chloride resin 
    from S$4.99
    Min. 6 days
  24. R face out inclined hanger up type 19
    ROYAL R face out inclined hanger up type 19
    Thickness (mm)  (Claw) 3.0  Material  (Nail) Steel special steel  Color  Chrome  Applicable Dimensions (mm)  Round pipe Φ19.1 × 1.6t 
    from S$27.99
    Min. 6 days
  25. 24R holder
    ROYAL 24R holder
    Material  Zinc die casting  Thickness (mm)  2.0  Color  Chrome  Suitable for  SB-24  Suitable Pipe  SB-32 
    from S$3.09
    Min. 6 days
  26. Little bracket LP-3S
    ROYAL Little bracket LP-3S
    Only size 0-4 compatible Automatic lock type retaining standard equipment Arm metal fittings for mounting S bar 32 (SB-32) in a slit hole mounting type shelf installation system (corresponding to the torsional load of S bar mounting face parts) * There is no up angle for the arm bracket (however,... Read More
    Thickness (mm)  3.0t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$3.39
    Min. 6 days
  27. V Face Out Hanger Single 10/22
    ROYAL V Face Out Hanger Single 10/22
    Thickness (mm)  (U-shape) 2.6  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Square pipe 10 × 22 × 1.2t  Material  Steel 
    from S$10.99
    Min. 6 days
  28. V face out hanger single 16Φ
    ROYAL V face out hanger single 16Φ
    Thickness (mm)  (U-shape) 2.6  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Round pipe Φ15.9 × 1.6t  Material  Steel 
    from S$9.29
    Min. 6 days
  29. Slim bar bracket
    ROYAL Slim bar bracket
    Thickness (mm)  3.0  Nominal Size  50  Size  50  Suitable for  SLB-14  Material  Steel 
    from S$4.69
    Min. 17 days
  30. V face out hanger double 10/22
    ROYAL V face out hanger double 10/22
    Thickness (mm)  (U-shape) 2.6  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Square pipe 10 × 22 × 1.2t  Material  Steel 
    from S$16.99
    Min. 6 days
  31. V faceout slope 10/22
    ROYAL V faceout slope 10/22
    Thickness (mm)  (U-shape) 2.6  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Square pipe 10 × 22 × 1.2t  Material  Steel 
    from S$21.99
    Min. 6 days
  32. Little bracket LS-02S
    ROYAL Little bracket LS-02S
    Arm metal fittings for S bar 32 mounting of installation system such as slit hole hanging type shelf (corresponding to torsional load of S bar mounting type face parts) Only size 0 to 4 compatible Automatic lock type retaining standard equipment No up angle of arm bracket (however, notch part is ... Read More
    Suitable for  (Stabilizer) SL  Thickness (mm)  3.0t  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel special steel 
    from S$3.39
    Min. 6 days
  33. Rod hook ten-hand type 6Φ (for PCH / PCC)
    ROYAL Rod hook ten-hand type 6Φ (for PCH / PCC)
    Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  SB-24・32  Material  Steel  Included Accessories  stopper  Wire rod (mm)  Φ6 
    from S$3.39
    Min. 6 days
  34. V face out hanger up type 25Φ
    ROYAL V face out hanger up type 25Φ
    Thickness (mm)  (U-shape) 2.6  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Round pipe Φ25.4 × 1.6t  Suitable for  SB-24・32  Material  Steel 
    from S$24.99
    Min. 6 days
  35. Rod hook 6Φ Safety type
    ROYAL Rod hook 6Φ Safety type
    Wire Diameter Φ(mm)  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from S$2.79
    Min. 6 days
  36. Rod hook up type
    ROYAL Rod hook up type
    Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  M5 screw  Material  Steel  Wire rod (mm)  Φ6 
    from S$6.69
    Min. 6 days
  37. R face out bracket 16
    ROYAL R face out bracket 16
    R type bracket Automatic lock type Retaining standard equipment Face out guard (FOC) Name 13 or 19 can be installed Face parts for hanger display that are directly attached to the foundation columns for installation systems such as slit hole-mounted shelves. * Retaining RPK cannot be used
    Color  Chrome  Offset Angle (°)  (Arm bracket) 0.75 up  Pipe Dimensions (mm)  Φ15.9  Thickness (mm)  (Claw) 3.0  Suitable for  (Stabilizer) SL  Included Accessories  Suspension  Material  (Nail) Steel special steel  Wall Thickness (mm)  1.6t, (claw steel) 2.6t 
    from S$8.99
    Min. 6 days
  38. Rod hook, 10-hand hook, guard line 6Φ
    ROYAL Rod hook, 10-hand hook, guard line 6Φ
    Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from S$4.39
    Min. 6 days
  39. Up hanger bracket for S-bar 24
    ROYAL Up hanger bracket for S-bar 24
    Thickness (mm)  3.0  Color  Chrome  RoHS directive (corresponding to 10 substances)  Correspondence  Type  Outside  Suitable for  SB-24 only  Material  Steel special steel 
    from S$11.99
    Min. 6 days
  40. V face out hanger double 25Φ
    ROYAL V face out hanger double 25Φ
    Thickness (mm)  (U-shape) 2.6  RoHS directive (corresponding to 10 substances)  Correspondence  Applicable Dimensions (mm)  Round pipe Φ25.4 × 1.6t  Material  Steel 
    from S$6.19
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 88

Set Ascending Direction