All Category

Stainless Workbenches

A stainless steel work table is a work table used in scientific research, experiments and cooking. In addition to various sizes, there are types with drawer storage and solid shelves and slatted shelves as required, which can be selected according to ease of use. The H frame type without shelves makes it easy to sit and sit under a table. When you want to store and use a wagon or other equipment, the legs are fixed in a three-way frame and the work surface is open. There are casters that are easy to move, and some manufacturers can install casters as an option. Although it is made of stainless steel with excellent chemical resistance and easy cleaning, there is a high risk of rusting, so care must be taken when using chlorinated detergents.
View : Grid List
Filter

Items 1 - 40 of 73

Set Ascending Direction
  1. Casters for Stainless Steel Work Table (1 Set of 4)
    Shinko Casters for Stainless Steel Work Table (1 Set of 4)
    Shinko's workbench and casters suitable for all models. Kitchen, medical care, physics and chemistry, various factories * Corrosion may be accelerated in places where chlorine-based detergents and chemicals are used.
    Suitable for  All Shinko work bench models  Included Accessories  Caster spanner for installation × 1  Stopper  Compliant  Thread Size  M20×2.5  Material (Metal Hub)  Steel  Specification  With free wheel stopper 
    from S$59.99
    Min. 2 days
  2. Plug-in type clamp
    SHT Plug-in type clamp
    Insert it into the hole on the table to fix it, and securely clamp various workpieces. For various welding work.
    Material  Carbon steel (S45C, S55C)  2018 Trusco page  7 0284  Trusco Part No.  818-8510  Mass (kg)  0.54 
    Rating:
    100%
    from S$55.99
    Min. 2 days
  3. Door-to-door
    Shinko Door-to-door
    Each part of the door.
    Rating:
    20%
    from S$2.39
    Min. 2 days
  4. Shelf support hook for cupboard
    Shinko Shelf support hook for cupboard
    A shelf support hook for the middle shelf.
    from S$4.69
    Min. 9 days
  5. Ball lock bolt
    SHT Ball lock bolt
    Accessories and brackets can be fixed and connected quickly and securely with a single touch. Securely locked with 3 movable steel balls. For various welding work.
    2018 Trusco page  7 0284  Material  Carbon steel (SUM22L) 
    from S$189.90
    Min. 2 days
  6. Caster (for work bench) Stainless steel bracket with stopper
    Shinko Caster (for work bench) Stainless steel bracket with stopper
    Suitable for Shinko workbenches. For places with a lot of water or where chemicals are used * Rust may occur if chlorine-based or acidic detergents, chemicals, or dirt remain attached. * In the above environment, clean it regularly.
    Wheel Diameter (Φmm)  75  Included Accessories  Caster spanner for installation × 1  Thread Size  M20×2.5  Material (Metal Hub)  Stainless steel 
    from S$229.90
    Min. 2 days
  7. Shelf stopper for work table / rack (1 stage with screws)
    Shinko Shelf stopper for work table / rack (1 stage with screws)
    from S$9.29
    Min. 2 days
  8. V block Magnet type
    SHT V block Magnet type
    A magnet type V-shaped block that is ideal for holding round tubes. For various welding work.
    Mass (kg)  0.44  Height (mm)  12  2018 Trusco page  7 0285  Diameter (mm)  37  Specification  For welding table TDJKM-100  Material  Aluminum alloy steel (AC3A)  Trusco Part No.  818-8514 
    from S$76.99
    Min. 2 days
  9. Angle bracket
    SHT Angle bracket
    An angle bracket that is convenient when fixing workpieces at 90 °. For various welding work.
    Material  Carbon steel (S45C)  2018 Trusco page  7 0286 
    from S$139.90
    Min. 2 days
  10. Side clamp
    SHT Side clamp
    A clamp for fixing the work from the side. For various welding work.
    Clamping Width (mm)  0~35  2018 Trusco page  7 0286  Specification  For welding table TDJKM-100  Mass (kg)  1.04  Trusco Part No.  818-8524 
    from S$199.90
    Min. 32 days
  11. Upper guide for door
    Shinko Upper guide for door
    Each part of the door.
    from S$2.39
    Min. 9 days
  12. Stopper middle
    SHT Stopper middle
    A stopper that is used by inserting it into a hole on the table to fix the work in an appropriate position and clamp it. For various welding work.
    2018 Trusco page  7 0285  Height (mm)  38.1  Diameter (mm)  25  Mass (kg)  0.64  Trusco Part No.  818-8511  Specification  For welding table TDJKM-100  Material  Carbon steel (SS400) 
    from S$47.99
    Min. 32 days
  13. stopper
    SHT stopper
    A stopper that is used by inserting it into a hole on the table to fix the work in an appropriate position and clamp it. For various welding work.
    2018 Trusco page  7 0285  Material  Carbon steel (SUM22L) 
    from S$55.99
    Min. 2 days
  14. Corner guard for hanging cabinet
    Shinko Corner guard for hanging cabinet
    A corner guide for hanging cupboards. Protects the horns.
    from S$11.99
    Min. 9 days
  15. Rest button Magnet type
    SHT Rest button Magnet type
    The work can be raised and held at any position regardless of the hole position on the table. For various welding work.
    Height (mm)  11.5  Diameter (mm)  40  2018 Trusco page  7 0286  Material  Carbon steel (SS400)  Mass (kg)  0.52  Trusco Part No.  818-8518 
    from S$55.99
    Min. 32 days
  16. Recessed ball lock bolt
    SHT Recessed ball lock bolt
    Fixes and connects accessories and brackets quickly and securely. Securely locked with 3 movable steel balls. For various welding work.
    Material  Carbon steel (SUM22L)  2018 Trusco page  7 0284 
    from S$69.99
    Min. 32 days
  17. Magnetic plug
    SHT Magnetic plug
    By inserting it into a hole such as an angle bracket, a magnet function is added to the angle bracket. For various welding work.
    Material  Carbon steel (SS400)  Diameter (mm)  25  Trusco Part No.  818-8526  Height (mm)  25  2018 Trusco page  7 0286  Specification  For welding table TDJKM-100  Mass (g)  120 
    from S$73.99
    Min. 32 days
  18. Shelf Stopper for Rolling Cart (for 1-Tier with Screws)
    Shinko Shelf Stopper for Rolling Cart (for 1-Tier with Screws)
    A shelf stopper for wagons.
    from S$9.29
    Min. 9 days
  19. Fixed rest
    SHT Fixed rest
    By combining with a welding table hole, D stop bar, straight edge stop, etc., we support to hold the workpiece at any height. For various welding work.
    Mass (g)  320  Height (mm)  51  Trusco Part No.  818-8531  2018 Trusco page  7 0287  Diameter (mm)  38  Specification  For welding table TDJKM-100  Material  Carbon steel (S45C) 
    from S$119.90
    Min. 32 days
  20. Caster Spanner for Rolling Cart
    Shinko Caster Spanner for Rolling Cart
    It is a caster spanner for wagons.
    from S$6.19
    Min. 8 days
  21. Screw adapter
    SHT Screw adapter
    It is an accessory that can be used as a screw hole by attaching it from the back of the welding table. For various welding work.
    Material  Carbon steel (SS400)  Trusco Part No.  818-8525  2018 Trusco page  7 0286  Mass (g)  520 
    from S$55.99
    Min. 32 days
  22. Bumper rubber for work table / rack
    Shinko Bumper rubber for work table / rack
    It is attached to a support to protect the product and wall surface when moving. * 4 pieces are required for each unit.
    Material  Rubber 
    from S$12.99
    Min. 8 days
  23. Magspring clamp
    SHT Magspring clamp
    A clamp with a spring allows you to hold the work quickly and easily with one hand. For various welding work.
    Maximum Jaw Opening (mm)  83  Material  Carbon steel (S45C, S55C)  Trusco Part No.  818-8529  Overall Length (mm)  226  Specification  For welding table TDJKM-100  2018 Trusco page  7 0287  Mass (g)  500 
    from S$73.99
    Min. 3 days
  24. Door cushion
    Shinko Door cushion
    Each part of the door.
    from S$2.39
    Min. 9 days
  25. Straight edge stop
    SHT Straight edge stop
    A straight type flat par that is ideal for holding and positioning workpieces. For various welding work.
    Mass (kg)  0.68  2018 Trusco page  7 0285  Trusco Part No.  818-8517  Material  Carbon steel (S45C) 
    from S$169.90
    Min. 32 days
  26. Adjustable rest
    SHT Adjustable rest
    A plug-in holder with variable height adjustment. By combining with a welding table hole, D stop bar, straight edge stop, etc., it supports to hold the workpiece at an arbitrary height. For various welding work.
    Trusco Part No.  818-8530  Diameter (mm)  44.5  Specification  For welding table TDJKM-100  2018 Trusco page  7 0287  Material  Carbon steel (S45C)  Adjustment Range (mm)  51~70  Mass (g)  220 
    from S$279.90
    Min. 3 days
  27. Caster spanner for work table and rack
    Shinko Caster spanner for work table and rack
    A caster spanner for workbenches and racks.
    from S$6.19
    Min. 8 days
  28. Eccentric pad
    SHT Eccentric pad
    A pad that securely fixes the workpiece with a cam structure. For various welding work.
    Material  Carbon steel (SS400)  Diameter (mm)  38  Mass (g)  360  Specification  For welding table TDJKM-100  Adjustment Range (mm)  14~24  2018 Trusco page  7 0287  Trusco Part No.  818-8527  Height (mm)  12.7 
    from S$36.99
    Min. 32 days
  29. 165 x 120mm x 65mm Magnet Pocket (Blue)
    ESCO 165 x 120mm x 65mm Magnet Pocket (Blue)
    Allowable Load (kg)  0.3  Outer Dimensions (mm)  165×120  Size  A6  Specification  Pocket material: PVC 
    from S$8.49
    Min. 5 days
  30. 212x267x79mm  Pocket with magnet
    ESCO 212x267x79mm Pocket with magnet
    Allowable Load (kg)  Dimensions, Width W x Depth D x Height H (mm)  267×79×212  Material  PS・ABS 
    from S$24.99
    Min. 2 days
  31. 300x240mm  Magnet pocket (blue)
    ESCO 300x240mm Magnet pocket (blue)
    Allowable Load (kg)  Outer Dimensions (mm)  300×240  Size  A4  Specification  Pocket material: PVC 
    from S$21.99
    Min. 5 days
  32. 217x308mm / A4  Magnet card case
    ESCO 217x308mm / A4 Magnet card case
    Dimension (mm)  217×308  Material  Magnet sheet, soft vinyl chloride 
    from S$13.99
    Min. 5 days
  33. Ball bolt spacer
    SHT Ball bolt spacer
    28mm type ball lock bolt (T65015) is used to connect accessories and brackets that are not thick enough. For various welding work.
    2018 Trusco page  7 0284  Mass (kg)  0.1  Specification  For welding table TDJKM-100  Trusco Part No.  818-8507  Height (mm)  Material  Carbon steel (S45C) 
    from S$29.99
    Min. 32 days
  34. Welding Table System Accessories
    SHT Welding Table System Accessories
    A side bracket that is convenient for fixing large workpieces using the side of the table. For various welding work.
    Mass (kg)  1.1  Width (mm)  100  Thickness (mm)  12.7  Trusco Part No.  161-2068  Length (mm)  36.5  Number of Holes  Height (mm)  99.5 
    from S$78.99
    Min. 3 days
  35. 500x120x120mm  Storage rack with magnet
    ESCO 500x120x120mm Storage rack with magnet
    Dimensions, Width W x Depth D x Height H (mm)  500×120×120  Allowable Load (kg)  About 2  Material  Body / partition: Steel (powder coating) 
    from S$48.99
    Min. 5 days
  36. 170x95x170mm  Box with magnet
    ESCO 170x95x170mm Box with magnet
    Dimensions, Width W x Depth D x Height H (mm)  170×95×170  Allowable Load (kg)  About 1.5  Capacity (L)  About 1.8 
    from S$29.99
    Min. 5 days
  37. 337x230x11mm  A4 size magnet pocket (clear)
    ESCO 337x230x11mm A4 size magnet pocket (clear)
    Load capacity (g)  200  Dimension (mm)  337×230×11  Color  Transparent 
    from S$19.99
    Min. 5 days
  38. 337x230x11mm  A4 size magnet pocket (blue)
    ESCO 337x230x11mm A4 size magnet pocket (blue)
    Load capacity (g)  200  Dimension (mm)  337×230×11  Color  Transparent blue 
    from S$19.99
    Min. 5 days
  39. 280x  95x  80mm  Storage rack with magnet
    ESCO 280x 95x 80mm Storage rack with magnet
    Dimensions, Width W x Depth D x Height H (mm)  280×95×80  Included Accessories  With 2 hooks 
    from S$32.99
    Min. 5 days
  40. 188x125x11mm  A6 size magnet pocket (blue)
    ESCO 188x125x11mm A6 size magnet pocket (blue)
    Dimension (mm)  188×125×11  Load capacity (g)  50  Color  Transparent blue 
    from S$13.99
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 73

Set Ascending Direction