Grease Guns
A grease injector is used to lubricate the machine with grease used to reduce the smooth rotation of the machine shaft and friction of the bearing. Lever type that can work accurately even in narrow places is gaining popularity. The amount of grease discharged can be adjusted with a lever, and grease filling is easy. Pneumatic grease guns are effective when there are a wide range of grease-up locations and work in high and narrow places. The grip that rotates 360 ° can be used everywhere and can be discharged continuously.
Other Related Pages
Yamada Corp. Micro HoseIf the lubrication nozzle of the lever type grease gun (excluding push type) or SK type hand bucket pump does not match the shape of the lubrication port (grease fitting), or if there is a lubrication port in a place where it is difficult to lubricate, Please use a suitable nozzle or micro hose. ... Read MoreRegular Pressure (MPa) (Microhose) 21 Trusco Part No. 112-5737 Type For hydraulic nipple Material Mainly PU Nozzle Fitting Size R1/8 Connector Diameter R1/8- AZ Straight nozzle for grease gunYou can work reliably even in narrow places. For hydraulic nipples For AZ grease gun onlyConnector Diameter R1/8
-
- ESCO Grease Gun Coupler (90 °)For manual grease guns only. With large and small connectors For hard-to-reach places and sealed bearingsDimension (mm) 78×30 Specification 90 ° coupler Esco Part No. EA991CN-103 Suitable for [Grease gun] Connectable to bite coupler
- LIGHT SEIKI Grease nipple wrenchDock the extractor on the nipple wrenchLength (mm) 125 Included Accessories Extractor square type Material S45C
- Yamada Corp. Electric grease gun (rechargeable) EG400B2An electric grease gun equipped with a lithium-ion battery. Ideal for grease-up at construction sites and high places. It can be easily carried in the field where there is no power supply or air source, and grease can be continuously applied by operating a switch.Hose Length (mm) 1000 (with lock coupler) Trusco Part No. 152-0757 Overall Length (mm) 379 Mass (g) 4 Maximum Pressure (MPa) 40 Capacity (mL) 400 Grease Tank Diameter (Φmm) 60.5 Discharge Rate (mL/min) 96 Battery Charger Model Charger for E-400B2 Battery E1040B Classification of the Hazardous Non-dangerous goods Connector Thread Nozzle: Rc1 / 8from S$1,099.00Min. 2 days
-
- ESCO 337mm grease gun nozzleNozzle for EA991CF, CF-8 / -50Overall Length (mm) 337 Screw size [Nozzle] R1 / 8 (PT1 / 8) Shape flexible Esco Part No. EA991CF-106 Specification With chuck Mass (g) 140from S$39.99Min. 2 days
- ESCO 1/8 "NPT grease pump coupler (strong type)Type Leak-proof structure strong type Esco Part No. EA991CN-102from S$25.99Min. 2 days
- TRUSCO Gasket for high pressure grease gun PK32Mass (g) 2 Trusco Part No. 414-7359 Classification of the Hazardous Non-dangerous goodsfrom S$2.09Min. 32 days
- ZAHREN K6 mini lube partsHose Length (m) 1.5 Trusco Part No. 121-5817 Body Diameter (mm) 180 Container 2.5kg can Mass (kg) 3.4 Pump charge (cc) 30 Height (mm) 360 Height H x Diameter (Φmm) 360×180 Maximum Pumping Rate 3cc / trigger Maximum Discharge Pressure (MPa) 69 Applicable Grease ～#2from S$269.90Min. 5 days
- ZAHREN Lubricator adapterType Rod extension pipe Dimension, Overall Length (mm) 215from S$119.90Min. 5 days
- TRUSCO Plunger for high pressure grease gun PG480Mass (g) 22 Trusco Part No. 414-7740 Classification of the Hazardous Non-dangerous goodsfrom S$5.99Min. 3 days
- TRUSCO Plunger gasket for high pressure grease gun PH500Trusco Part No. 414-7642 Mass (g) 7 Classification of the Hazardous Non-dangerous goodsfrom S$2.59Min. 3 days
- MonotaRO Lever Grease Gun 400gYou can work reliably even in narrow places. The amount of grease discharged can be adjusted with the lever. Grease can be easily filled. The hardness of the chain has been improved, making it easier to pull. For consistency # 1 / # 2 * Do not use for any other purpose.Paint Inlet Female
- MonotaRO For hose grease gunThis is convenient when there is a refueling port in a place where it is difficult to lubricate. Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only * Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only (Not compatible with other companies' products) * ... Read MoreConnector Diameter NPT1/8 Type With chuck/For hydraulic nipples
- Yamada Corp. Hand Grease GunLever type hand grease gun for 420mL cartridge (bellows type). The cartridge can be set easily and speedily, without getting your hands dirty, and there is no need to worry about dust or sand getting into the grease. Various nozzles and micro hoses can be used. * The total length and mass of the ... Read MoreDischarge Volume (mL) 0.93 / stroke Mass (kg) 1.68 Overall Length (mm) 395 Capacity (mL) 400 Maximum Pressure (MPa) 50 Maximum Discharge Pressure (MPa) 50 Grease Tank Diameter (Φmm) 60.5 Grease Filling Cartridge only Type Lever type Type of Operation Manual lever type Applicable Grease NLGI No.0～No.2 Nozzle Fitting Size R1/8 Connector Diameter Rc1/8
- AZ Flexible Hose for Grease Gun (Chuck Type)You can work reliably even in narrow places. For hydraulic nipples For AZ grease gun onlyConnector Diameter R1/8
- TRUSCO Cartridge type grease gunEasy to operate and keeps your hands clean. Since it is a cartridge type, refilling and filling work is easy and work efficiency is improved. It is compact and can be used in any workplace.Volume per Discharge (mL) 0.8～0.9 Mass (kg) 1.3 Trusco Part No. 112-5168 Included Accessories 240mm straight nozzle Capacity (mL) 400 Grease Tank Diameter (Φmm) 62.6 Applicable Grease No.2 Classification of the Hazardous Non-dangerous goods Nozzle Fitting Size Nozzle connection screw: Rc1 / 8 Material / Finish Steel
- Yamada Corp. Hand Grease GunYou can use either a 400g cartridge or a hand-packed 500g.Volume per Discharge (mL) 1 Mass (kg) 1.3 Nozzle Length (mm) 185 Overall Length (mm) 368 Capacity (mL) 420 Maximum Pressure (MPa) 50 Maximum Discharge Pressure (MPa) 50 Grease Tank Diameter (Φmm) 59.6 Type of Operation Manual Classification of the Hazardous Non-dangerous goods Included Accessories Nozzle (CNP-2), hose (SPK-3C) Connector Thread Rc1/8
- MonotaRO Bent Nozzle For Grease GunThis is convenient when there is a refueling port in a place where it is difficult to lubricate. Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only * Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only (Not compatible with other companies' products) * ... Read MoreOverall Length (mm) 180 Shape Bend Connector Diameter NPT1/8 Type With chuck/For hydraulic nipples
- Yamada Corp. Hydro chuck nozzleIf the lubrication nozzle of the lever type grease gun (excluding push type) or SK type hand bucket pump does not match the shape of the lubrication port (grease fitting), or if there is a lubrication port in a place where it is difficult to lubricate, Please use a suitable nozzle or micro hose. ... Read MoreClassification of the Hazardous Non-dangerous goods Nozzle Fitting Size R1/8 Connector Diameter R1/8
- AZ 2 Way 80 Grease Gun One Hand TypeA 2-way type grease gun that can be used even if grease is directly packed in a cylinder or cartridge grease (made by AZ) is attached. You can easily operate it with one hand. For grease-up of various machines * Please use special greaseIncluded Accessories (Straight nozzle) 115mm Maximum pressure (kg / cm 2) 300 Specification Azette grease only Capacity Cartridge 80g, hand-clogged 120g Applicable Grease Consistency No. 1-2
- Yamada Corp. Micro hoseIf the lubrication nozzle of the lever type grease gun (excluding push type) or SK type hand bucket pump does not match the shape of the lubrication port (grease fitting), or if there is a lubrication port in a place where it is difficult to lubricate, Please use a suitable nozzle or micro hose. ... Read MoreTrusco Part No. 112-5711 Mass (g) 240 Length (mm) 355 Overall Length (mm) 355 Type For pin type fitting Material Mainly NBR, C3604B Classification of the Hazardous Non-dangerous goods Nozzle Fitting Size R1/8 Connector Diameter R1/8
- MonotaRO Narrow straight nozzle For grease gunThis is convenient when there is a refueling port in a place where it is difficult to lubricate. Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only * Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only (Not compatible with other companies' products) * ... Read MoreOverall Length (mm) 120 Connector Diameter NPT1/8 Type No chucking Shape Straight for narrow spaces
- TRUSCO Grease gun hoseIntermediate hoses and nozzles are available for various injection operations and grease guns. Connection screw diameter is R1 / 8Classification of the Hazardous Non-dangerous goods
- ZAHREN Hand grease gun* Hand grease gun for grease consistency No. 0 and No. 1.Applicable Grease #1、#2 Mass (kg) 1.42 (including nozzle) Width (mm) 125 Maximum Discharge Pressure (MPa) 31 Overall Length (mm) 375 (including nozzle / 545) Capacity (mL) Bellows 400, hand jam 600 Grease Filling Bellows type cartridge, hand-packed Capacity (g) Hand-packed 600 / cartridge 400 Type of Operation Manual type Classification of the Hazardous Non-dangerous goods
- ZAHREN Grease gun flexible hoseHose Length (mm) 350 Mass (g) 70 Nozzle Fitting Size R1/8
- Yamada Corp. Straight nozzleIf the lubrication nozzle of the lever type grease gun (excluding push type) or SK type hand bucket pump does not match the shape of the lubrication port (grease fitting), or if there is a lubrication port in a place where it is difficult to lubricate, Please use a suitable nozzle or micro hose. ... Read MoreMaterial Mainly STKM12B Specification No chucking Classification of the Hazardous Non-dangerous goods Connector Diameter R1/8 Nozzle Fitting Size R1/8
- AZ Standard bending nozzle for grease gun (with chucking)You can work reliably even in narrow places. For hydraulic nipples For AZ grease gun onlyDimension (mm) 170 Connector Diameter R1/8
- AZ 2-WAY 80 grease gun (lever type)You can work reliably even in narrow places. The amount of grease discharged can be adjusted with the lever. Grease can be easily filled. * Grease is sold separately. * Please use special greaseIncluded Accessories (Straight nozzle) 115mm Mass (kg) 0.54 Grease Tank Diameter (Φmm) 35.8 Type of Operation Air type Nozzle Fitting Size R1/8
- MonotaRO Straight nozzle For grease gunThis is convenient when there is a refueling port in a place where it is difficult to lubricate. Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only * Order code: 20288415 For Monotaro Grease Gun 400g Lever type MG002 only (Not compatible with other companies' products) * ... Read MoreOverall Length (mm) 170 Connector Diameter NPT1/8 Shape Straight Type With chuck/For hydraulic nipples
- Yamada Corp. Cartridge grease gunA grease gun that can be used for both 420mL cartridges and 500mL hand-packed items. Grease can be replaced quickly without getting your hands dirty. Uses an easy-to-grip rubber grip. Especially suitable for solidified areas that require high pressure.Suitable for (Grease) Consistency No.2 Volume per Discharge (mL) 0.93 Mass (kg) 1.69 Nozzle Length (mm) 171 Trusco Part No. 273-7094 Overall Length (mm) 401 Grease Tank Diameter (Φmm) 60.5 Maximum Discharge Pressure (MPa) 80 Maximum Pressure (MPa) 80 Capacity (mL) Cartridge: 420 / hand clogging: 500 Grease Filling For both hand jam and cartridge Specification For hydraulic nipple Capacity (g) Hand jam 500 / cartridge 400 Type of Operation Manual lever type Classification of the Hazardous Non-dangerous goods Connector Diameter Rc1/8
- KTC Lock couplerThis is an optional part for the cordless grease gun JTAE911. It can be fixed / released to the grease nipple with one action.Classification of the Hazardous Non-dangerous goods
- Yamada Corp. Micro hoseIf the lubrication nozzle of the lever type grease gun (excluding push type) or SK type hand bucket pump does not match the shape of the lubrication port (grease fitting), or if there is a lubrication port in a place where it is difficult to lubricate, Please use a suitable nozzle or micro hose. ... Read MoreMaterial Mainly PU Classification of the Hazardous Non-dangerous goods Nozzle Fitting Size R1/8 Connector Diameter R1/8
- Yamada Corp. High pressure micro hose setWithstand Pressure (MPa) 69 Connector R1/8 Material Steel, CR rubber Tip Diameter (mm) Φ16
- Yamada Corp. Hand grease gun* The total length and mass of the specifications do not include the nozzle. The maximum pressure shown is the pressure when using the chuck nozzle (CNP-1, 2). When using grease by hand, it may not be possible to use it with a low viscosity of NLGI1 or less depending on temperature conditions.Included Accessories 120mm straight nozzle (HSP-1) Type Lever type Nozzle Fitting Size R1/8
- Yamada Corp. Grease lock couplerMass (g) 100 Withstand Pressure (MPa) 69 Trusco Part No. 854-9168 Length (mm) 89.6 Connector Rc1/8 Connector Diameter Rc1/8 Material Steel Specification Yamada GLC-70 Tip Diameter (mm) Φ16
-
- AZ Straight nozzle for grease gun (with chucking)You can work reliably even in narrow places. For hydraulic nipples For AZ grease gun onlyDimension (mm) 170 Connector Diameter R1/8
Filter by categories
