TIG Welding Rods
TIG welding rod is a rod-shaped filler metal used for TIG welding. Since it is welded while preventing oxidation of the base material, there is no contamination and it can be finished beautifully. There are various materials such as for stainless steel, for hardfacing, for mild steel and high-tensile steel, and it is selected according to the metal used as the base material. TIG welding is a welding method in which the periphery of the weld is shielded with an inert gas. When storing the welding rod for a long time, it is necessary to pay attention to the occurrence of rust and dirt. If the frequency of use is low, you may want to purchase a small quantity product.
Other Related Pages
MonotaRO TIG Welding Rod For Stainless SteelConvenient small quantity type 1kg packing. Good workability in all postures. Co-gold welding of SUS304 and welding of SUS302, SUS303, etc. * Fume and gas generated during welding may damage your health. Take appropriate precautions such as exhausting, ventilating, and wearing respiratory protect... Read MoreSuitable for SUS304 Material stainless steel Color Silvery white JIS Standard Z3321 YS308 applicable AWS Standard A5.9 Applicable to ER308 RoHS directive (corresponding to 10 substances) Correspondence Identification color Yellow (edge color)- Kobelco (Kobe Steel) TIG welding rod for mild steelWelding rod for all-position welding of mild steel, 490N / mm class 2 high tension, and low temperature aluminum killed steel. Very low slag, very good workability and a beautiful bead appearance. It has an excellent impact value at low temperatures, and is suitable for all-position welding and b... Read MoreJIS Standard Z3316 YGT50 AWS Standard A5.18 ER70S-G RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO TIG welding rod for mild steelSuitable for welding carbon steel and low alloy steel, and suitable for welding equipment and vehicles. Welding work is easy and the bead appearance is excellent. * Fume and gas generated during welding may damage your health. Exhaust, ventilate, and wear respiratory protective equipment.JIS Standard Equivalent to Z3316 YGT50 AWS Standard A5.18 ER70S-G equivalent
- NIPPON WELDING ROD Aluminum TIG Filler Rod (A5356)AL-Mg based alloy with 5.0% Mg as standard composition, suitable for welding AL-Mg based non-heat treated alloy materials, AL-Mg-Si based heat treated alloy materials and AL-Zn-Mg based heat treated alloy materials. , It is widely used for welding motorcycles and vehicles. The feature is that the... Read MoreJIS Standard Z 3232 A 5356-BY AWS Standard A5.10 R5356 RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) TIG welding rod for stainless steelWelding of 18% Cr-8% Ni stainless steel (SUS304, etc.).Suitable for SUS304 JIS Standard Z3321 YS308 (former Z3321 Y308) AWS Standard A5.9 ER308 RoHS directive (corresponding to 10 substances) Correspondence
- NIPPON WELDING ROD TIG Welding Rod for Stainless SteelAustenitic stainless steel TIG filler rod used for chemical equipment, chemical containers, various plants, stainless steel building structures, etc. The weld metal has good corrosion resistance and mechanical properties, and has excellent weld crack resistance. * As a general rule, do not perfor... Read MoreJIS Standard Z3321 YS308 (former Z3321 Y308) AWS Standard A5.9 ER308 RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) TIG welding rod for aluminum5.0% Mg is a standard Al-Mg material. Tl ignition improves mechanical properties and has good weldability, making it the most widely used welding material. Suitable for welding Al-Mg alloys (A5052 etc.), Al-Mg-Sl alloys (A6061 etc.) and Al-Zn-Mg alloys (A7N01 etc.), and used in motorcycles and ve... Read MoreStandard (JIS)Z3232 A5356-BY、(AWS)A5.10 R5356 RoHS directive (corresponding to 10 substances) Correspondence
- H&H Stainless TIG Welding RodConvenient small amount type with good workability in all postures and slag peelability. Common gold welding of SUS304, other welding of SUS301, SUS302, etc. * Be sure to work using a welded surface with light-shielding glass. Be careful not to get burned because the welded part gets hot. When we... Read MoreSuitable for SUS304 JIS Standard Applicable to Z3321Y308 AWS Standard A5.9ER308 applicable
- Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) For mild steel TIG Welding rodSuitable for back wave welding of mild steel and 490N / mm class 2 high-strength steel and welding of thin plates. For back wave welding, use back shield.JIS Standard Z3316 YGT50 applicable Elongation (%) 34 Tensile Strength (MPa) 550 AWS Standard A5.18 Applicable to ER70S-Gfrom S$69.99Min. 2 days
- NIKKO YOZAI MFG TIG welding rod for mild steelSuitable for welding mild steel, 490N / mm class 2 high-strength steel and low-temperature aluminum killed steel, and ideal for back wave welding of various pipes and welding of thin plates.Color Bar end color: yellow JIS Standard Z3316 YGT50 applicable Elongation (%) (As welded) 37, (620 ℃ × 1hrSR) 40 Tensile Strength (MPa) (As welded) 530, (620 ° C x 1 hr SR) 500 AWS Standard A5.18 Applicable to ER70S-G RoHS directive (corresponding to 10 substances) Correspondence
- TASETO Stainless TIG bar TG-308Taseto TG308 is a welding material for 18Cr-8Ni stainless steel (SUS304), which is most commonly used for food equipment and general chemical equipment. ..Color Bar end color: yellow JIS Standard YS308 Elongation (%) 43.5 Tensile Strength (MPa) 593 AWS Standard ER308 applicablefrom S$199.90Min. 2 days
- NIPPON WELDING ROD TIG welding rod for stainless steelAn austenitic stainless steel tig filler rod with a composition of 24Cr-13Ni, used for welding SUS 309S, 13Cr steel, etc. Due to the high content of Cr and Ni, the weld metal has an austenite structure containing an appropriate amount of ferrite even when diluted from a carbon steel low alloy ste... Read MoreSuitable for SUS309, different base material JIS Standard Z3321 YS309 (former Z3321 Y309) Elongation (%) 44 Tensile Strength (MPa) 581 RoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / Black
- NIKKO YOZAI MFG TIG welding rod (for high-strength steel) NTG-50RSuitable for welding mild steel, 490MPa class high-strength steel and low-temperature aluminum killed steel, and ideal for back wave welding of various pipes and welding of thin plates.Color Rod end / yellow JIS Standard Z3316 W49A0U12 AWS Standard A5.18 For ER70S-G RoHS directive (corresponding to 10 substances) Correspondence
- NIKKO YOZAI MFG TIG welding rod for stainless steelGood workability in all postures and slag peelability. Not only workability, but also corrosion resistance, heat resistance and mechanical properties are very good. Common gold welding of SUS304, other welding of SUS301, SUS302, etc. Welding of SUS304L.Suitable for SUS304・304L AWS Standard A5.9 Applicable to ER308 RoHS directive (corresponding to 10 substances) Correspondencefrom S$189.90Min. 2 days
- Kobelco (Kobe Steel) TIG welding rod for aluminum5.3% Si is a standard Al-Si material. Since it is resistant to high temperature cracking, it is suitable for welding 6000 series alloys and aluminum alloy castings that are prone to cracking. Note that with Al-Mg alloys containing 3% or more of Mg, Mg2Si compounds are formed in the welds and the ... Read MoreJIS Standard Z3232 A4043-BY AWS Standard A5.10 R4043
- Kobelco (Kobe Steel) TIG welding rod for stainless steelLow C18% Cr-8% Ni steel such as SUS304L, 18% Cr-8% Ni steel such as low temperature specification SUS304.Standard (JIS)Z3321 YS308L、(AWS)A5.9 ER308L RoHS directive (corresponding to 10 substances) Correspondencefrom S$189.90Min. 7 days
- NIPPON WELDING ROD Aluminum TIG filler rod (A4043)For Al-Si alloySpecification For Al-Si alloy Color Orange JIS Standard Z 3232 A4043-BY AWS Standard A5.10 R 4043 RoHS directive (corresponding to 10 substances) Correspondencefrom S$229.90Min. 10 days
- NIPPON WELDING ROD TIG welding rod for stainless steelLow carbon austenitic stainless steel ferritic stainless steel TIG filler rod with low carbon content, so the weld metal has excellent intergranular corrosion resistance even in the welded state. Therefore, it is suitable for welding in flue gas desulfurization equipment, fertilizer plants, food ... Read MoreSuitable for SUS316・316L JIS Standard Z3321 YS316L Elongation (%) 45 (example) Tensile Strength (MPa) 586 (example) AWS Standard A5.9 ER316L RoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / greenfrom S$299.90Min. 10 days
- NIPPON WELDING ROD Aluminum TIG filler rod (A5183)For Al-Mg-Mn alloyColor (End face) blue JIS Standard Z3232 A5183-BY AWS Standard A5.10 R5183 RoHS directive (corresponding to 10 substances) Correspondencefrom S$189.90Min. 5 days
- Kobelco (Kobe Steel) TIG welding rod for stainless steelWelding of 22% Cr-12% Ni stainless steel (SUS309S, etc.). Welding of dissimilar materials between stainless steel and carbon steel or low alloy steel. Underlay welding on the laminated material side of stainless clad steel such as 18% Cr-8% Ni, and underlay welding when overlaying stainless steel... Read MoreSuitable for SUS309, different base material JIS Standard Z3321 YS309 (former Z3321 Y309) AWS Standard A5.9 ER309 RoHS directive (corresponding to 10 substances) Correspondence
- TASETO Stainless steel TIG bar TG-309Taseto TG309 is a stainless steel welding material with a composition of 25Cr-12Ni. Since the content of Cr and Ni is high, it is used for welding different materials between carbon steel / low alloy steel and stainless steel.Suitable for SUS309, different base material JIS Standard YS309 AWS Standard ER309 applicablefrom S$259.90Min. 6 days
- NIPPON WELDING ROD TIG welding rod for stainless steelA low carbon austenitic stainless steel TIG filler rod with a low carbon content, so the weld metal has excellent intergranular corrosion resistance even when it is still welded. Suitable for place welding that requires corrosion resistance and cannot be subjected to solution heat treatment after... Read MoreSuitable for SUS304・304L Elongation (%) 46 Tensile Strength (MPa) 576 RoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / Redfrom S$289.90Min. 10 days
- TASETO Stainless TIG bar TG-308LTaseto TG308L is a welding material for SUS304 and 304L stainless steel. By lowering the carbon content compared to TG308, the intergranular corrosion resistance is further improved. There are also TG308L 2 and TG308L 1 with lower carbon content.Suitable for SUS304・304L JIS Standard YS308L AWS Standard ER308L applicable
- NIKKO YOZAI MFG TIG welding rod (for stainless steel) NS-430RFor 18Cr stainless steel. Welding of SUS430.JIS Standard Z3321 YS430 AWS Standard A5.9 For ER430from S$199.90Min. 123 days
- TOKUDEN TIG welding rod for stainless steel T-310SWelding of SUS310 / SUS310S, welding of stainless clad steelJIS Standard Z3321 YS310S RoHS directive (corresponding to 10 substances) Correspondence
- TOKUDEN TIG welding rod for stainless steel T-308Co-gold welding of SUS304 and welding of SUS302, SUS303, etc.JIS Standard Z3321 YS308 AWS Standard A5.9 ER308 RoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) TIG welding rod for stainless steelJIS Standard Z3321 YS316L (former Z3321 Y316L) Elongation (%) 41 Tensile Strength (MPa) 550 AWS Standard A5.9 ER316L Identification color Greenfrom S$389.90Min. 7 days
- TOKUDEN TIG welding rod for stainless steel T-309Welding of SUS309S / stainless cast steel, welding of dissimilar materials such as stainless steel and carbon steel / low alloy steelJIS Standard Z3321 YS309 AWS Standard A5.9 ER309 RoHS directive (corresponding to 10 substances) Correspondencefrom S$259.90Min. 13 days
- TASETO Stainless TIG bar TG-316Taseto TG316 is a welding material for 18Cr-12Ni-2Mo stainless steel (SUS316). Since it contains a large amount of Ni and contains Mo, it contains seawater, acetic acid, dilute sulfuric acid and other non-oxidizing acids, and Has excellent corrosion resistance to salts.JIS Standard YS316 AWS Standard ER316 applicablefrom S$259.90Min. 6 days
- NIPPON WELDING ROD Aluminum TIG filler rod (A1100)For pure AlColor (Edge) red JIS Standard Z3232 A1100-BY AWS Standard A5.10 R1100 RoHS directive (corresponding to 10 substances) Correspondencefrom S$189.90Min. 5 days
- Kobelco (Kobe Steel) TIG welding rod for stainless steelWelding of 18% Cr-12% Ni-2% Mo stainless steel (SUS316, etc.)Suitable for SUS316 Color (Identification color) White AWS Standard A5.9 ER316from S$289.90Min. 7 days
- NIPPON WELDING ROD TIG welding rod for stainless steelLike WEL TIG 309, it is used for welding SUS 309S, 13Cr steel, 18Cr steel, and welding different materials between stainless steel and carbon steel or low alloy steel, but since the carbon content is suppressed to 0.03% or less, low carbon stainless steel It is also suitable for first layer weldi... Read MoreElongation (%) 42 Tensile Strength (MPa) 566 RoHS directive (corresponding to 10 substances) Correspondence Identification color Edge / Yellow-greenfrom S$269.90Min. 10 days
- TOKUDEN TIG welding rod for stainless steel T-329J4LWelding of SUS329J1, SUS329J3L, SUS329J4LRoHS directive (corresponding to 10 substances) Correspondencefrom S$669.90Min. 13 days
-
- NIKKO YOZAI MFG TIG welding rod for stainless steelWelding of SUS309S and heat resistant cast steel. Others Joining 18Cr-8Ni stainless steel and mild steel. Welding of the first layer of stainless clad steel or corrosion resistant overlay on mild steel.Color Bar end color: Black Elongation (%) 41.2 Tensile Strength (MPa) 603 AWS Standard A5.9 ER309 applicable RoHS directive (corresponding to 10 substances) Correspondencefrom S$259.90Min. 123 days
- TASETO Stainless TIG bar TG-309LTaseto TG309L is a welding material used for dissimilar welding of carbon steel / low alloy steel and stainless steel like TG309. Since the carbon content is low, it is also suitable for underlay welding during low carbon stainless steel overlay welding.JIS Standard YS309L AWS Standard ER309L applicablefrom S$229.90Min. 6 days
- NIKKO YOZAI MFG TIG welding rod for stainless steelWelding of SUS316L. Welding of dissimilar metals of mild steel and stainless steel.Color Bar end color: green Elongation (%) 41.9 Tensile Strength (MPa) 564 AWS Standard A5.9 ER316 applicable RoHS directive (corresponding to 10 substances) Correspondencefrom S$349.90Min. 4 days
- NIKKO YOZAI MFG TIG welding rod (for stainless steel) NS-308RFor 18Cr-8Ni stainless steel. Common gold welding of SUS304, other welding of SUS301, SUS302, etc.Color Rod end / yellow JIS Standard Z3321 YS308 AWS Standard A5.9 ER308 applicablefrom S$229.90Min. 4 days
- Kobelco (Kobe Steel) TIG welding rod for stainless steelWelding of different materials between stainless steel and other steel types. Underlay of low C stainless slud steel, underlay of low C stainless weld overlay.Standard (JIS)Z3321 YS309L、(AWS)A5.9 ER309L RoHS directive (corresponding to 10 substances) Correspondencefrom S$289.90Min. 14 days
- NIKKO YOZAI MFG Stainless TIG welding rod19Cr-12Ni-2Mo Welding rod for obtaining austenite weld metal. Has excellent corrosion resistance to non-oxidizing acids. Welding of SUS316.Color Bar end color: White Type For 18Cr-12Ni-2.5Mo stainless steel JIS Standard D316-16 Elongation (%) 40.5 Tensile Strength (MPa) 570 AWS Standard E316-16 RoHS directive (corresponding to 10 substances) Correspondencefrom S$259.90Min. 4 days
