Welding Measure Instruments
Other Related Pages
- TRUSCO Welding GaugeMade of stainless steel and resistant to rust. Robust, light and convenient to carry (with hanging case). It is absolutely necessary to speed up welding work and rationalize quality control. Supports all welding measurements such as general welding, construction, shipbuilding, and bridges.
- Shinwa Rules Steel accuracy measuring instrument 7 piece setThe 7 gauges, which are indispensable for steel frame accuracy inspection, are put together in one sturdy storage case, making it convenient to carry. For quality control of major steel materials that involve welding work. * Depending on the delivery location, the delivery date may be postponed a... Read Morefrom S$949.90Min. 5 days
- SK (Niigata Seiki) Welding Gauge WG-1Robust, easy and convenient to carry (with vinyl case) for speeding up welding work and rationalizing quality control, etc. Measurement of weld overlay, fillet size and angle, etc.Route Interval (mm) 0.5~3 Tip Opening Angle (°) 0~60 (minimum reading: 5) Extra Height (mm) 10 Fillet Throat Thickness (mm) 10 Round bar diameter R (Φmm) 10 Fillet Leg Length (mm) 20 Body Scale (mm) 40 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Length ±0.4 Measurement Accuracy of Angle ±0.7
- SK (Niigata Seiki) Welding Gauge WGU-7MCompatible with all types of welding measurement It is very convenient for general welding, construction, shipbuilding, bridges, and other welding work for steel frames and assembly. The scale can be read on the same plane, and the structure is very easy to read. Measurement of weld overlay, fill... Read MoreTip Opening Angle (°) 0~60 (minimum reading: 5) Fillet Throat Thickness (mm) 15 Undercut Depth (mm) 25 Fillet Leg Length (mm) 25 Extra Height (mm) 25 Route Interval (mm) 2~5 Body Scale (mm) 50・60 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Angle ±2from S$84.99Min. 2 days
- MonotaRO Welding gaugeIt is useful for speeding up welding work and quality control. A measuring tool suitable for general welding, construction, shipbuilding, and welding of bridges, etc. Please check the instruction manual for the detailed measurement method. * Because it is a measuring tool, do not drop or hit it. ... Read MoreThickness (mm) 4.3 Dimension (mm) 77×62 Material Stainless steel Measuring Accuracy ±0.5mm Angular Accuracy (°) ±1
- TECHNOPLAN Guide scaleSince it uses heat-resistant cooperative permanent magnets, it can be expected to improve workability with a firm holding force. It is a special tool for fusing by moving while keeping the height of the crater constant in gas welding.Width (mm) 83 Length (mm) 46
- FUJITOOL Multi-Welding GaugeIt can be used for all-round measurement such as beet overlay measurement, dimension measurement, groove angle measurement, and route spacing measurement in welding work. For all measurements in welding workType Welding gauge Accuracy (mm) Within 0.2 Material Stainless steel
- MonotaRO Welding gauge with undercut measurement functionIt is useful for speeding up welding work and quality control. It is very convenient because the scale can be read on the same plane. Weld overlay, measurement of fillet size and angle * Because it is a measuring tool, do not drop or hit it. * Please refrain from using it for any other purpose. *... Read MoreTip Opening Angle (°) 0~60 (minimum reading: 5) Fillet Throat Thickness (mm) 15 Extra Height (mm) 25 Undercut Depth (mm) 25 Route Interval (mm) 2~5 Body Scale (mm) 50・60 Material Stainless steel Measurement Accuracy of Angle ±2
- Shinwa Rules Route interval measurement gaugeRoot surface inspection measurement in gas cutting / groove processing in manufacturing process inspection * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * The driver will not assist in unloading. * Products with proofread... Read MoreSuitable for 97794 Measuring Range (mm) 4~12from S$179.90Min. 2 days
- SK (Niigata Seiki) Welding Gauge WGU-9MMeasurement functions such as plate thickness, weld bead width measurement, round object outer diameter and bulge of pressure welding of reinforcing bars, etc. are added. The measurement range for thick welding has become wider. The bevel angle measurement range can be measured from 0 to 70 °. Th... Read MoreTip Opening Angle (°) 0 to 70 (minimum reading: 5) bead width (mm) 0~53 Fillet Throat Thickness (mm) 15 Fillet Leg Length (mm) 25 Undercut Depth (mm) 25 Extra Height (mm) 25 Route Interval (mm) 2~5 Trusco Part No. 377-6816 Round bar diameter R (Φmm) 50 Body Scale (mm) 60 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Angle ±2from S$189.90Min. 2 days
- Shinwa Rules Bevel angle measurement gaugeBevel angle inspection measurement for gas cutting and groove processing during manufacturing process inspection * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * The driver will not assist in unloading. * Products with pro... Read MoreSuitable for 97794 Setting Angle (°) 30-50 (every 2.5 °)from S$179.90Min. 2 days
- NISSAN TANAKA Simple cutting guide (for cutting and cutting)Applicable Pipes (Blow-pipe) small and medium size cutterfrom S$119.90Min. 2 days
- Shinwa Rules Steel Frame Precision Measurement Instrument Welding Gauge AYou can measure the size of the fillet (leg length) and the overlay dimension (reinforcement overlay dimension). Weld gauge used to measure all weld inspections * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * The driver w... Read MoreDimension (mm) 70.5×48×7 Mass (g) 85 Material Stainless steelfrom S$129.90Min. 2 days
- SK (Niigata Seiki) Angle Multi Welding Gauge WGA-65Direct measurement of the groove angle of the welded joint is possible with this one. By sharpening the tip, it can also measure thin plates with a root gap of 0 mm and 15 mm or less. Large scale that is easy to use in the field. The minimum scale corresponds to 0.5 °. At the same time, it is pos... Read MoreOffset Angle (°) (Tilt after joint / stud welding) 70-110 Tip Opening Angle (°) 25 to 65 (minimum reading: 0.5) Trusco Part No. 412-1678 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel / silver finish Measurement Accuracy of Angle ±0.5from S$199.90Min. 2 days
- NISSAN TANAKA Simple cutting guide (for cutting A and B)A cutting guide that allows you to use your own cutting device as it is. The structure does not require electricity, so there is no need to worry about breakdowns. For simple straight or arc cutting. * Medium-sized cutting device and No. A cutting device are not included.Applicable Pipes (Blowpipe) A-B cutting machinefrom S$139.90Min. 2 days
- SK (Niigata Seiki) Welding gauge AWG-10Welding essentials! Analog type. A gauge dedicated to measuring the throat thickness and excess height of fillet meat. Made of stainless steel for easy rust prevention Weld overlay, fillet sizeFillet Throat Thickness (mm) 11 Tip Opening Angle (°) 60 ・ 70 ・ 80 ・ 90 fixed Extra Height (mm) 8 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Length ±0.2from S$49.99Min. 2 days
- SK (Niigata Seiki) Welding Gauge WGU-8MMeasurement functions such as plate thickness, weld bead width measurement, round object outer diameter and bulge of pressure welding of reinforcing bars, etc. are added. The measurement range for thick welding has become wider. Bevel angle measurement range can be measured from 0 to 70 ° Weld ov... Read MoreTip Opening Angle (°) 0 to 70 (minimum reading: 5) bead width (mm) 0~53 Fillet Throat Thickness (mm) 15 Fillet Leg Length (mm) 25 Extra Height (mm) 25 Undercut Depth (mm) 25 Route Interval (mm) 2~5 Round bar diameter R (Φmm) 30 Body Scale (mm) 50・60 Trusco Part No. 817-8082 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Angle ±2from S$199.90Min. 2 days
- SK (Niigata Seiki) Welding gauge WG-2Robust, easy and convenient to carry (with vinyl case) for speeding up welding work and rationalizing quality control, etc. Measurement of weld overlay, fillet size and angle, etc.Route Interval (mm) 0.5~5 Tip Opening Angle (°) 0~60 (minimum reading: 5) Extra Height (mm) 10 Fillet Throat Thickness (mm) 10 Undercut Depth (mm) 10 Fillet Leg Length (mm) 10 (minimum reading 0.1) Round bar diameter R (Φmm) 20 Body Scale (mm) 40 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel Measurement Accuracy of Length ± 0.2 (gap measurement ± 0.4) Measurement Accuracy of Angle ±0.7from S$229.90Min. 2 days
- Shinwa Rules Welding guide rulerInsulation coating is applied to the surface of the ruler. Since it is difficult to energize, it is difficult to spark even if the welding machine touches it. The main body is made of aluminum and is light and easy to handle. The angle can be changed freely, the angle is easy to match, and the sl... Read MoreMain Unit Dimensions (mm) 1010 x 550 x 54 (at 90 °) Right Angle Accuracy ± 1 / 1000rad (± 1.0mm at 1000mm) Operating Temperature Range (℃) -20~70from S$339.90Min. 2 days
- NISSAN TANAKA KT-270 with 726mm railA cutting guide that allows you to use your own cutting device as it is. Since a constant speed can be obtained, cutting can be performed with the same accuracy as automatic cutting. Groove cutting can be done in the same way. The structure that does not require electricity does not need to worry... Read MoreType KT-270 Offset Angle (°) (Bevel cutting) 0-45 Trusco Part No. 306-1493 Effective Length (mm) (Guide rail) 636 Mass (kg) 2 Length (mm) (Guide rail) 726 Cutting Speed (mm/min) 300~700from S$949.90Min. 2 days
- SK (Niigata Seiki) Welding Gauge FDW-1You can easily, quickly and accurately measure the depth and length of the undercut. High-precision measurement is possible by using a dial gauge. Stable measurement is possible with 3-point support. For undercut measurement onlyTrusco Part No. 377-5381 Undercut Depth (mm) 4 (Accuracy: ± 0.04) Material Stainless steelfrom S$159.90Min. 2 days
- Shinwa Rules Joint displacement measurement gaugeMeasurement of joint misalignment (diaphragm and flange misalignment) * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * The driver will not assist in unloading. * Products with proofreading cannot be canceled after ordering... Read MoreSuitable for 97794from S$179.90Min. 7 days
- Shinwa Rules Steel accuracy measuring instrument Undercut gaugeThe measurement base is comfortable to sit on, so stable reading is possible. Gauge used for undercut measurement of weld overlay * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred. * The driver will not assist in unloading. * ... Read MoreDimension (mm) 115×58×18 Mass (g) 86 Material Stainless steel / brass / copper Accuracy (mm) ± 0.05 (less than 1.0mm)from S$99.90Min. 2 days
- SK (Niigata Seiki) Welding gauge WG-5A maximum of 50 mm extra size can be measured to speed up welding work and streamline quality control. Increased base thickness maintains a sense of stability during measurement. Silver finish reduces reflection during photography. Semi-transparent plastic case that is easy to check. With Measure... Read MoreExtra Height (mm) 10 Round bar diameter R (Φmm) 10 Body Scale (mm) 30・35 Fillet Leg Length (mm) 50 Fillet Throat Thickness (mm) 50 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel / silver finish Measurement Accuracy of Length ±0.4from S$229.90Min. 2 days
- SK (Niigata Seiki) Welding gauge WG-3It is possible to measure extra dimensions of up to 50 mm to speed up welding work and rationalize quality control. Maintains a sense of stability during measurement by increasing the base thickness. Equipped with a rotor, various measurements are possible. With a semi-transparent plastic case th... Read MoreRoute Interval (mm) 0.5~5 Tip Opening Angle (°) 0~60 (minimum reading: 5) Undercut Depth (mm) 10 Extra Height (mm) 10 Round bar diameter R (Φmm) 10 Fillet Leg Length (mm) 50 Fillet Throat Thickness (mm) 50 RoHS directive (corresponding to 10 substances) Correspondence Material Stainless steel / silver finish Measurement Accuracy of Length ±0.4 Measurement Accuracy of Angle ±0.7from S$269.90Min. 4 days
- KANETEC Guide scaleHigh-performance permanent magnets firmly fix the scale. The GS-1 can adjust the scale up and down according to the height of the crater. The GS-2 can be easily attached and detached because the suction force can be turned ON / OFF by operating the lever. A dedicated guide device for moving while... Read Morefrom S$299.90Min. 3 days
- SK (Niigata Seiki) Welding gauge WGU-2SYou can easily, quickly and accurately measure the depth and length of the undercut. Since the undercut stylus is a screw type, 0 point adjustment is possible. For undercut measurement onlyBody Scale (mm) 100 Undercut Depth (mm) 2 (Accuracy: ± 0.1) Material Stainless steel Measurement Accuracy of Length ±0.6from S$99.90Min. 4 days
- ESCO Welding gauge (made of stainless steel)For welding overlay and fillet measurementResolution (mm) 0.1 Overall Length (mm) 100 Fillet Throat Thickness (mm) 11 Mass (g) 80 Esco Part No. EA719K-11 Included Accessories Plastic case Material Stainless steel Height (mm) [Extra] 8 Angle Measuring Range (°) [Groove angle] 60 ・ 70 ・ 80 ・ 90 Accuracy (mm) ±0.2from S$66.99Min. 5 days
- ASADA Tip 60A CUT Master 52/82/102Current (A) 60 Suitable Model CUT Master 52, 82, 102from S$119.90Min. 5 days
- Shinwa Rules Parts Welding guide rulerspecial parts * Do not use for any other purpose.from S$5.89Min. 5 days
- TRUSCO Welding gauge (for precision undercut measurement)A high-precision cage for undercuts. Made of stainless steel, it is resistant to rust and is robust. Comes in a small and portable lifting case. Supports all welding measurements such as general welding, construction, shipbuilding, and bridges.Measuring Range (mm) Undercut depth: 0-2 Instrumental Error (mm) ±0.1 Minimum Reading (mm) 0.2mm Mass (g) 90 Trusco Part No. 229-7361from S$109.90Min. 3 days
- ASADA Tip 40A For SL40Current (A) 40 Suitable Model CUT Master 42 (for non-contact use)from S$79.99Min. 5 days
- SK (Niigata Seiki) Digital welding gaugeIt is compatible with the separately sold Bluetooth BOX. The measured value can be transmitted wirelessly to a personal computer. To guarantee accuracy, it comes with an inspection table that shows the values at the time of inspection. Easy to read with digital display. Comes with a master gauge.... Read MoreRoHS directive (corresponding to 10 substances) Correspondencefrom S$379.90Min. 4 days
- ESCO Welding route spacing limit gauge (stainless steel)Dimension (mm) 90 x 2 x 20 (blank Nos. 1 to 4) Accuracy Length dimension measurement: ± 0.1 Material Stainless steelfrom S$179.90Min. 6 days
- ASADA Chip 80A for CUT Master 82/102Suitable Model CUT Master 82, 102 Current (A) 80from S$109.90Min. 5 days
- ESCO Welding gauge (stainless steel)Dimension (mm) 95×1.5×70 Material Stainless steelfrom S$119.90Min. 6 days
Filter by categories