All Category

Linear Guide Carriages

View : Grid List
Filter

Items 1 - 40 of 59

Set Ascending Direction
  1. LM Block SSR xx XW Type
    THK LM Block SSR xx XW Type
    This type has a narrowed LM block width and is tapped. ※※ The delivery date may change depending on the order status, so please check when ordering.
    Type  Single block  Material  Steel  Block mounting hole type  Tap hole  Specification  With end seal 
    Rating:
    100%
    from S$149.90
    Min. 2 days
  2. LM Block (HSR Type)
    THK LM Block (HSR Type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    Rating:
    100%
    from S$99.90
    Min. 2 days
  3. LM block SHS ○○ C type
    THK LM block SHS ○○ C type
    The flange of the LM block is tapped. It can be installed from either the top or bottom. It is used when the table cannot be drilled with through holes for mounting bolts. * Delivery time may change depending on the order status, so please check when ordering.
    Type  Single block  Block mounting hole type  Tap hole 
    from S$119.90
    Min. 2 days
  4. LM block (HSR type)
    THK LM block (HSR type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Type  Single block  Block mounting hole type  Tap hole  Specification  With end seal + side seal + inner seal 
    from S$99.90
    Min. 2 days
  5. LM block model SSR ○○ XV
    THK LM block model SSR ○○ XV
    A space-saving type with a shorter overall length of the LM block. ※※ The delivery date may change depending on the order status, so please check when ordering.
    Dimension D0 (Φmm)  Material  Iron  Type  Single block  Block mounting hole type  Tap hole  Specification  With end seal 
    from S$129.90
    Min. 2 days
  6. LM block SHS ○○ V type
    THK LM block SHS ○○ V type
    This type has a narrowed LM block width and is tapped. It is used when the table cannot be drilled with through holes for mounting bolts. * Delivery time may change depending on the order status, so please check when ordering.
    Type  Single block  Block mounting hole type  Tap hole 
    from S$119.90
    Min. 2 days
  7. Igubal® pillow block (KSTM)
    Igus (R) Igubal® pillow block (KSTM)
    from S$14.99
    Min. 5 days
  8. Block (Flange type)
    SBC Block (Flange type)
    Tolerance (μm)  (Height H / Dimension W2) ± 100  RoHS directive (corresponding to 10 substances)  Dimension G (mm)  20  Dimension F (mm)  60  Type  Single block  Block mounting hole type  Tap hole  Dimension Q2 (mm)  Φ3.5 
    from S$79.99
    Min. 6 days
  9. LM block (HR type)
    THK LM block (HR type)
    RoHS directive (corresponding to 10 substances)  Type  Single block  Block mounting hole type  Tap hole 
    from S$239.90
    Min. 5 days
  10. LM block (HSR type)
    THK LM block (HSR type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Grease Nipple  B-M6F  Type  Single block  Block mounting hole type  Tap hole 
    from S$139.90
    Min. 4 days
  11. Igubal® pillow block (ESTM)
    Igus (R) Igubal® pillow block (ESTM)
    from S$7.49
    Min. 5 days
  12. Block (slim type)
    SBC Block (slim type)
    RoHS directive (corresponding to 10 substances)  Dimension G (mm)  20  Dimension F (mm)  60  Type  Slim type  Block mounting hole type  Tap hole  Dimension Q2 (mm)  Φ3.5 
    Rating:
    20%
    from S$109.90
    Min. 5 days
  13. Block (Slim type long)
    SBC Block (Slim type long)
    RoHS directive (corresponding to 10 substances)  Dimension G (mm)  20  Dimension F (mm)  60  Type  Slim type long  Block mounting hole type  Tap hole  Dimension Q2 (mm)  Φ3.5 
    from S$99.90
    Min. 7 days
  14. LM block (HSR type)
    THK LM block (HSR type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Grease Nipple  B-M6F  Block mounting hole type  Drill hole  Type  Single block 
    from S$139.90
    Min. 4 days
  15. LM block (HSR type)
    THK LM block (HSR type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    from S$139.90
    Min. 4 days
  16. LM block (HSR type)
    THK LM block (HSR type)
    The balls roll on the precision-ground rolling surface, and the ball train is circulated by the end plate built into the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (radial direction, reverse radial dir... Read More
    Block mounting hole type  Drill hole  Type  Single block 
    from S$99.90
    Min. 4 days
  17. Block (Flange type long)
    SBC Block (Flange type long)
    Tolerance (μm)  (Height H / Dimension W2) ± 100  RoHS directive (corresponding to 10 substances)  Dimension G (mm)  20  Dimension F (mm)  60  Type  Single block  Block mounting hole type  Tap hole  Dimension Q2 (mm)  Φ3.5 
    from S$119.90
    Min. 7 days
  18. Linear way L / LWLF + wide type + unit unit
    IKO (NIPPON THOMPSON) Linear way L / LWLF + wide type + unit unit
    Linear Way L / LWLF is a wide type suitable for use in a single row of track rails.
    from S$74.99
    Min. 2 days
  19. Linear way H / LWHS + compact block type + downward mounting shape + unit unit
    IKO (NIPPON THOMPSON) Linear way H / LWHS + compact block type + downward mounting shape + unit unit
    Linear Way H / LWHS is a compact block type / downward mounting type slide unit.
    from S$139.90
    Min. 2 days
  20. C lube linear way H / MHD + block type + downward mounting shape + unit unit
    IKO (NIPPON THOMPSON) C lube linear way H / MHD + block type + downward mounting shape + unit unit
    C-Lube Linear Way H / MHD is a block type / downward mounting type slide unit. The C-Lube Linear Way H is a highly rigid linear way (linear motion guidance device) that achieves a well-balanced and high load capacity by incorporating a large-diameter steel ball.
    from S$63.99
    Min. 2 days
  21. LM Block (SHS Type)
    THK LM Block (SHS Type)
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the ball retainer and the end plate incorporated in the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (ra... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    from S$129.90
    Min. 3 days
  22. LM block (SHS type)
    THK LM block (SHS type)
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the ball retainer and the end plate incorporated in the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (ra... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    from S$189.90
    Min. 3 days
  23. LM block (SHS type)
    THK LM block (SHS type)
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the ball retainer and the end plate incorporated in the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (ra... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    from S$129.90
    Min. 3 days
  24. Linear Way E / LWES Block Type Downward Mounting Shape Unit
    IKO (NIPPON THOMPSON) Linear Way E / LWES Block Type Downward Mounting Shape Unit
    Linear Way E / LWES is a block type / downward mounting type slide unit.
    from S$94.99
    Min. 2 days
  25. C lube linear way L / MLF + wide type + unit unit
    IKO (NIPPON THOMPSON) C lube linear way L / MLF + wide type + unit unit
    C-Lube Linear Way L / MLF is a wide type suitable for use in a single row of track rails. The Linear Way L has a steel ball holding band built into the ball holding type slide unit, so it is a safe structure that the steel ball does not fall off even if the slide unit is removed from the track rail.
    from S$74.99
    Min. 2 days
  26. Slide shifter S type
    OILES Slide shifter S type
    from S$259.90
    Min. 8 days
  27. Linear way E / LWET + flange type + downward mounting shape + unit unit
    IKO (NIPPON THOMPSON) Linear way E / LWET + flange type + downward mounting shape + unit unit
    Linear Way E / LWES is a block type / downward mounting type slide unit.
    from S$94.99
    Min. 2 days
  28. Linear way F / LWFF + flange type + upward mounting shape + unit unit
    IKO (NIPPON THOMPSON) Linear way F / LWFF + flange type + upward mounting shape + unit unit
    Linear Way F / LWFF is a flange type / vertical mounting type slide unit.
    from S$119.90
    Min. 33 days
  29. Linear way F / LWFS + block type + downward mounting shape + unit unit
    IKO (NIPPON THOMPSON) Linear way F / LWFS + block type + downward mounting shape + unit unit
    Linear Way F / LWFS is a block type / downward mounting type slide unit.
    from S$119.90
    Min. 33 days
  30. Linear way H / LWH + flange type + upward mounting shape + unit unit
    IKO (NIPPON THOMPSON) Linear way H / LWH + flange type + upward mounting shape + unit unit
    Linear Way H / LWH is a flange type / upward mounting type slide unit.
    from S$139.90
    Min. 2 days
  31. LM Block SR- ○○ V Type
    THK LM Block SR- ○○ V Type
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the end plate incorporated in the LM block. Even if the LM block is pulled out from the LM rail, the ball is held by the holding plate and will not fall off. The cross-sectional height is low, and t... Read More
    Type  SR-V type  Block mounting hole type  Tap hole  Specification  With end seal, side seal, inner seal 
    from S$129.90
    Min. 4 days
  32. Linear Motion Block (SHS Type)
    THK Linear Motion Block (SHS Type)
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the ball retainer and the end plate incorporated in the LM block. Since each ball row is arranged with a contact angle of 45 degrees so that the same rated load is applied to the four directions (ra... Read More
    Type  Single block  Block mounting hole type  Tap hole 
    from S$109.90
    Min. 3 days
  33. Single Linear Way H / LWHT Flange Type Downward Mounting Shape
    IKO (NIPPON THOMPSON) Single Linear Way H / LWHT Flange Type Downward Mounting Shape
    Linear Way H / LWHT is a flange type / downward mounting type slide unit.
    from S$79.99
    Min. 2 days
  34. LM block + SSR- ○○ XTB type
    THK LM block + SSR- ○○ XTB type
    The ball rolls on the precision-ground four-row rolling surface, and the ball row is circulated by the end plate incorporated in the LM block. By adopting a ball retainer, mutual friction between balls is eliminated and grease holding power is improved, so low noise, excellent high speed, long li... Read More
    Type  SSR-XTB type  Block mounting hole type  Tap hole  Specification  With end seal, side seal, inner seal 
    from S$159.90
    Min. 4 days
  35. C lube linear way L / ML (standard type / slide unit only)
    IKO (NIPPON THOMPSON) C lube linear way L / ML (standard type / slide unit only)
    The C-Lube Linear Way L has a structure in which steel balls that come into contact with the track at four points are arranged in two rows, so even though it is extremely small, it can be used in applications where loads that fluctuate in direction and size or compound loads act. Stable accuracy ... Read More
    Accuracy Class  Advanced  Preload  Light preload  Shape  Standard type  Material  stainless steel 
    from S$53.99
    Min. 2 days
  36. C lube linear way H / MH + flange type + upward mounting shape + unit unit
    IKO (NIPPON THOMPSON) C lube linear way H / MH + flange type + upward mounting shape + unit unit
    C-Lube Linear Way H / MH is a flange type / upward mounting type slide unit.
    from S$139.90
    Min. 2 days
  37. Linear Way L / LWL Standard Type Unit
    IKO (NIPPON THOMPSON) Linear Way L / LWL Standard Type Unit
    The Linear Way L has a steel ball holding band built into the ball holding type slide unit, so it is a safe structure that the steel ball does not fall off even if the slide unit is removed from the track rail.
    from S$53.99
    Min. 2 days
  38. C lube linear way E / MET + flange type + downward mounting shape + unit unit
    IKO (NIPPON THOMPSON) C lube linear way E / MET + flange type + downward mounting shape + unit unit
    C-Lube Linear Way E / MET is a flange type / downward mounting type slide unit.
    from S$94.99
    Min. 2 days
  39. Linear way F / LWFH + Flange type + Upward mounting shape + Unit unit
    IKO (NIPPON THOMPSON) Linear way F / LWFH + Flange type + Upward mounting shape + Unit unit
    Linear Way F / LWFF is a flange type / vertical mounting type slide unit.
    from S$289.90
    Min. 33 days
  40. Linear Way Rail Embedding
    IKO (NIPPON THOMPSON) Linear Way Rail Embedding
    Embedding for mounting holes on track rails
    from S$0.25
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 59

Set Ascending Direction