All Category

Speed Reducers

A reduction gear is a device that increases the torque obtained while being attached to a motor to reduce the rotational speed of the motor. In general, a worm gear is used to obtain a deceleration effect. Because of the structure of the worm gear, the input shaft of the motor and the output shaft that has been decelerated are orthogonal, and the degree of deceleration is determined by the gear ratio of the built-in worm gear. When selecting the reducer, check the shape of the input and output shafts, the specifications of the motor to be used, and the required reduction ratio and torque.
View : Grid List
Filter

Items 1 - 40 of 572

Set Ascending Direction
  1. Able reducer VRXF series (standard type)
    SHIMPO (NIDEC-SHIMPO) Able reducer VRXF series (standard type)
    Backlash (°)  0.25  Type  Standard type  Type of Sign  Flange mounting 
    from S$799.90
    Min. 2 days
  2. Worm reducer LMH-A
    SIGMA GIKEN Worm reducer LMH-A
    Type of Sign  Leg mounting  Transmission type  Worm gear  Type  Decelerator 
    from S$269.90
    Min. 3 days
  3. Worm reducer LMH-B
    SIGMA GIKEN Worm reducer LMH-B
    Transmission type  Worm gear  Type of Sign  Leg mounting  Type  Decelerator 
    from S$269.90
    Min. 3 days
  4. Able reducer VRXF series (high precision type)
    SHIMPO (NIDEC-SHIMPO) Able reducer VRXF series (high precision type)
    Type of Sign  Flange mounting 
    from S$1,099.00
    Min. 2 days
  5. Worm reducer LML-A
    SIGMA GIKEN Worm reducer LML-A
    Transmission type  Worm gear  Type of Sign  Leg mounting  Type  Decelerator 
    from S$269.90
    Min. 3 days
  6. Able reducer VRG series (Precision type)
    SHIMPO (NIDEC-SHIMPO) Able reducer VRG series (Precision type)
    "Quiet" "High rigidity" "High precision" Precision reducer VRG series for servo motors. Uses helical gears and planetary gear reduction mechanisms suitable for reducing vibration and noise. By making the best use of its strengths, we have achieved noise reduction. Th... Read More
    Type  Extension axis output  Type of Sign  Flange mounting  Transmission type  Planetary gear  Flanged  TYPE3 
    from S$949.90
    Min. 2 days
  7. Small one-stage worm reducer
    Maki Shinko Small one-stage worm reducer
    Transmission type  Worm reducer  Type  Decelerator 
    from S$299.90
    Min. 3 days
  8. Worm reducer LMV-B
    SIGMA GIKEN Worm reducer LMV-B
    Type  Decelerator  Transmission type  Worm gear  Type of Sign  Leg mounting 
    Rating:
    20%
    from S$269.90
    Min. 3 days
  9. Worm reducer LML-B
    SIGMA GIKEN Worm reducer LML-B
    Type of Sign  Leg mounting  Transmission type  Worm gear  Type  Decelerator 
    from S$239.90
    Min. 3 days
  10. Able reducer
    SHIMPO (NIDEC-SHIMPO) Able reducer
    Type of Sign  Flange mounting  Transmission type  Planetary gear 
    from S$949.90
    Min. 24 days
  11. counter
    SHIMPO (NIDEC-SHIMPO) counter
    Specification  2-phase input 
    from S$1,299.00
    Min. 2 days
  12. Able reducer NEV series
    SHIMPO (NIDEC-SHIMPO) Able reducer NEV series
    It is an orthogonal compact design that supports space saving that can further demonstrate the characteristics of a small servo motor. A series with a reduction ratio of 1/3 to 1/105 and a motor capacity of 100 to 4000W. High-grade grease with a long life is used as the lubricating oil, and there... Read More
    Type of Sign  Flange mounting  Transmission type  Planetary gear  Flanged  TYPE3 
    from S$999.90
    Min. 32 days
  13. Load cell
    SHIMPO (NIDEC-SHIMPO) Load cell
    from S$1,499.00
    Min. 2 days
  14. 2-stage worm reducer
    Maki Shinko 2-stage worm reducer
    Smooth and quiet operation due to sliding transmission compared to hypoid gears and helical gears.
    Torque (Nm)  113~56600  Specification  1st stage: Worm / 2nd stage: Warm  Reduction Ratio  300  Type  Wide variations of BH, KH, AH, AOH  Type of Sign  Leg mounting 
    from S$1,499.00
    Min. 10 days
  15. Small one-stage worm reducer
    Maki Shinko Small one-stage worm reducer
    Multipurpose IT-related, general industry equipment / equipment, medical welfare-related equipment * 50 / 60Hz combined use. * When ordering, please specify the rotation speed rpm (1800, 1500, 1200, 1000, 900, 750, 500, 250, 100). * Please note that the MA series can only perform as specified wit... Read More
    Rotational Speed (min -1 [rpm])  1800  Frequency (Hz)  50/60 combined use  Type  Decelerator  Type of Sign  Flange mounting  Shaft end key  JIS B1301-1996 (Parallel key) 
    from S$299.90
    Min. 23 days
  16. One-stage worm reducer
    Maki Shinko One-stage worm reducer
    Smooth and quiet operation due to slip conduction. Space-saving design is possible because it is an orthogonal axis. Multipurpose hall, stage, IT related, general industry equipment / equipment, transportation equipment such as construction machinery, medical welfare related equipment * 50 / 60Hz... Read More
    Rotational Speed (min -1 [rpm])  1800  Reduction Ratio  20  Mass (kg)  44  Input (kW)  5.84  Frequency (Hz)  50/60 combined use  Output Torque (Nm)  560  Trusco Part No.  827-7873  Type  Decelerator  Shaft end key  JIS B1301-1996 (Parallel key)  Type of Sign  Leg mounting 
    from S$1,999.00
    Min. 5 days
  17. One-stage worm reducer WP type
    Maki Shinko One-stage worm reducer WP type
    Smooth and quiet driving due to sliding transmission compared to hypoid gears and helical gears. It has a characteristic (self-locking) that makes it difficult to reverse from the output shaft.
    Reduction Ratio  20 
    from S$1,899.00
    Min. 10 days
  18. Worm reducer LMV-A
    SIGMA GIKEN Worm reducer LMV-A
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$289.90
    Min. 3 days
  19. Worm reducer LMV-D
    SIGMA GIKEN Worm reducer LMV-D
    Type  Decelerator  Transmission type  Worm gear  Type of Sign  Leg mounting 
    from S$269.90
    Min. 4 days
  20. Single stage worm reducer
    Maki Shinko Single stage worm reducer
    Transmission type  Worm reducer  Type  Decelerator 
    from S$479.90
    Min. 3 days
  21. Compact and lightweight worm reducer
    HASEGAWA MACHINE Compact and lightweight worm reducer
    Because it uses engineering plastic, it is ultra-lightweight, compact and economical. Driving is efficient and very quiet. The main body consists of two symmetrical casings that are attached with four bolts to form a single body, and maintenance is free without the need to change lubricating oil.... Read More
    from S$179.90
    Min. 18 days
  22. Single-stage worm reducer BP type
    Maki Shinko Single-stage worm reducer BP type
    Since the worm screw is always immersed in lubricating oil and the lubrication conditions are good, it is especially suitable for low-speed operation and high-load operation. The position of the output shaft is high, and it is easy to connect equipment such as pulleys and sprockets with a large r... Read More
    Motor  Without motor  Shaft end key  JIS B1301-1996 (Parallel key)  Spiral Angle  Right twist  Shape of Shank  (Input) Solid axis, (Output) Solid axis  Painting  Atomic tone green (alkyd resin)  Lubrication  Gear oil equivalent to ISO VG320  Transmission type  Worm reducer  Reduction Ratio  15 
    from S$1,299.00
    Min. 10 days
  23. Single-stage worm reducer (solid shaft) S series WP type
    Maki Shinko Single-stage worm reducer (solid shaft) S series WP type
    Smooth and quiet driving due to sliding transmission compared to hypoid gears and helical gears. It has a characteristic (self-locking) that makes it difficult to reverse from the output shaft. Space-saving design is possible. High reduction ratio in one step (10-60) Input shaft, output shaft: Al... Read More
    Spiral Angle  Right twist  Type  Decelerator  Shaft end key  JIS B1301-1996 (Parallel key)  Torque (Nm)  47~56600  Painting  Atomic tone green (alkyd resin)  Type of Sign  Leg mounting  Reduction Ratio  20  Motor  Without motor  shaft direction  Right side 
    from S$1,299.00
    Min. 10 days
  24. Able Reducer Concentric Shaft Type CR Series
    SHIMPO (NIDEC-SHIMPO) Able Reducer Concentric Shaft Type CR Series
    An economical type with a 30-minute backlash that keeps the price down. Compatible with 50-750W TYPE-3. (See the motor matching table) There are 3 types of reduction ratios: 5, 12, and 20. The output shaft is only straight shaft without keyway. Uses grease with high viscosity and difficult to sep... Read More
    from S$229.90
    Min. 2 days
  25. Able reducer
    SHIMPO (NIDEC-SHIMPO) Able reducer
    Quiet type with helical gears. A speed reducer that makes full use of the characteristics of high-precision servo motors. High-grade grease with a long life is used as the lubricating oil and does not need to be replaced. Since it has a closed packing structure, the mounting posture can be freely... Read More
    Material  Aluminum, iron  Type  Decelerator  Type of Sign  Flange mounting  Set Contents  Key, instruction manual 
    from S$799.90
    Min. 3 days
  26. Worm reducer LMV-C
    SIGMA GIKEN Worm reducer LMV-C
    Type  Decelerator  Transmission type  Worm gear  Type of Sign  Leg mounting 
    Rating:
    60%
    from S$289.90
    Min. 4 days
  27. Single-stage worm reducer (solid shaft) S Series Cap for B80
    Maki Shinko Single-stage worm reducer (solid shaft) S Series Cap for B80
    Color  White  Suitable Model  No.B 80R 15 
    Discontinued
  28. Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Frame No.  5105DA  Reduction Ratio  231  Mounting  Flange mounting  Capacity (kW)  0.2  Brake  With brake 
    Discontinued
  29. Cyclo gear motor Altax Flange mounting Single phase 100V
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Mounting  Flange mounting  Capacity (kW)  0.06  Reduction Ratio  Brake  Without brake  Frame No.  5065 
    Discontinued
  30. Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  25  Frame No.  5065  Brake  With brake  Mounting  Flange mounting  Capacity (kW)  0.04 
    Discontinued
  31. Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Mounting  Flange mounting  Reduction Ratio  17  Brake  With brake  Frame No.  5065  Capacity (kW)  0.04 
    Discontinued
  32. Cyclo gear motor Altax Flange mounting Single phase 100V
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  51  Capacity (kW)  0.09  Frame No.  5065  Brake  Without brake  Mounting  Flange mounting 
    Discontinued
  33. Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    Sumitomo Heavy Industries Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Capacity (kW)  2.2  Frame No.  5105  Mounting  Flange mounting  Brake  Without brake  Reduction Ratio  11 
    Discontinued
  34. Cyclo gear motor Altax Flange mounting Three-phase 200V With motor for inverter
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V With motor for inverter
    When the rotation speed of the AC motor exceeds 1800 rpm, the output torque is limited as shown in the figure on the right, so care must be taken with the load torque. Especially when accelerating rapidly to a rotation speed exceeding 1800 rpm immediately after starting, it is necessary to consid... Read More
    Capacity (kW)  1.5  Reduction Ratio  43  Frame No.  5125  Brake  Without brake  Mounting  Flange mounting 
    Discontinued
  35. Worm reducer TA type (under input shaft / on output shaft / horizontal orthogonal type)
    Taniguchi Gensokuki Worm reducer TA type (under input shaft / on output shaft / horizontal orthogonal type)
    It is an orthogonal type with the input axis (worm) at the bottom and the output axis at the top, and it has the widest range of use for general use. The input axis and output axis can be both axes, and the output axis is also on the right. -You can freely change the dimension to the left or the ... Read More
    nominal power (kW)  0.1 
    Discontinued
  36. Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    Sumitomo Heavy Industries Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Capacity (kW)  0.4  Reduction Ratio  119  Mounting  Flange mounting  Brake  Without brake  Frame No.  5115 
    Discontinued
  37. Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Brake  With brake  Frame No.  5105DA  Capacity (kW)  0.2  Mounting  Flange mounting  Reduction Ratio  143 
    Discontinued
  38. Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  119  Frame No.  5100  Mounting  Flange mounting  Brake  With brake  Capacity (kW)  0.2 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 572

Set Ascending Direction