All Category

Studded Type

The right-angle type is a spherical plain bearing with a holder at a right angle to a junk with a ball such as a link ball or elball. Link balls with special welds such as screws on the junk are convenient items suitable for smooth force transmission. Used in link mechanisms for automobiles, construction machinery, agricultural machinery, etc., and used in a wide range of work sites. You can search for the right part for your equipment from our extensive lineup, including a ball joint with a rubber cap that is easy to hold waterproof and lubricating grease, and a lightweight type made of high-strength aluminum alloy.

Other Related Pages

View : Grid List
Filter

37 Item(s)

Set Ascending Direction
  1. Link Ball BL Type (Right-hand Thread Type)
    THK Link Ball BL Type (Right-hand Thread Type)
    It is an RBL type compact type, and a strong zinc alloy is used for the holder, and the holder is formed at right angles to the shank with balls. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance.
    RoHS directive (corresponding to 10 substances)  JIS Class  JIS Class 2  Type  Right-hand thread type 
    Rating:
    94%
    from S$6.79
    Min. 2 days
  2. Link Ball BL Type (Left-Hand Thread Type)
    THK Link Ball BL Type (Left-Hand Thread Type)
    It is an RBL type compact type, and a strong zinc alloy is used for the holder, and the holder is formed at right angles to the shank with balls. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance.
    RoHS directive (corresponding to 10 substances)  JIS Class  JIS Class 2  Type  Left-hand thread type 
    Rating:
    95%
    from S$7.29
    Min. 2 days
  3. Elbow LHSA (Right thread)
    IKO (NIPPON THOMPSON) Elbow LHSA (Right thread)
    A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read More
    Specification  1N≒0.102Kgf  Remark  Grease-filled product.  Screw direction  Right-handed screw  Material (Main Unit)  Special zinc diecast alloy 
    Rating:
    93%
    from S$9.99
    Min. 2 days
  4. Elbow LHS (Right Thread)
    IKO (NIPPON THOMPSON) Elbow LHS (Right Thread)
    A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read More
    Specification  1N≒0.102Kgf  Screw direction  Right-handed screw 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  5. L-BALL LHS (Left-Hand Thread)
    IKO (NIPPON THOMPSON) L-BALL LHS (Left-Hand Thread)
    A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read More
    Specification  1N≒0.102Kgf  Screw direction  Left-hand thread 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  6. LINK Ball BL-A Type (Right-Hand Thread Type)
    THK LINK Ball BL-A Type (Right-Hand Thread Type)
    A holder is formed at a right angle to the shank with a ball, which is a specially welded high-precision steel ball and male screw. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance. The weight is greatly reduced by usi... Read More
    RoHS directive (corresponding to 10 substances)  Dimension L2 (mm)  Permissible Tilt Angle (°)  40  JIS Class  JIS Class 2  Type  Right-hand thread type 
    Rating:
    80%
    from S$9.99
    Min. 2 days
  7. Elbow LHSA (Left thread)
    IKO (NIPPON THOMPSON) Elbow LHSA (Left thread)
    A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read More
    Specification  1N≒0.102Kgf  Remark  Grease-filled product.  Screw direction  Left-hand thread 
    Rating:
    60%
    from S$6.39
    Min. 2 days
  8. Link ball BL-A type (left-hand thread type)
    THK Link ball BL-A type (left-hand thread type)
    The holder is molded at right angles to the shank with a ball, which is a specially welded high-precision steel ball and male screw. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance. The weight is greatly reduced by us... Read More
    Dimension L2 (mm)  Permissible Tilt Angle (°)  40  JIS Class  JIS Class 2  Type  Left-hand thread type 
    from S$9.99
    Min. 2 days
  9. M16xP1.5  Ball joint (right-hand screw)
    ESCO M16xP1.5 Ball joint (right-hand screw)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:64 B:23.5 C:36.5 
    from S$32.99
    Min. 5 days
  10. M12xP1.75  Ball joint (right-hand thread)
    ESCO M12xP1.75 Ball joint (right-hand thread)
    Dimension (mm)  A:50 B:19 C:30 
    from S$22.99
    Min. 5 days
  11. M10xP1.25  Ball joint (left-hand thread)
    ESCO M10xP1.25 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:43 B:17 C:21 
    from S$16.99
    Min. 5 days
  12. M10xP1.5  Ball joint (left-hand thread)
    ESCO M10xP1.5 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:43 B:17 C:25 
    from S$16.99
    Min. 5 days
  13. M  5xP0.8  Ball joint (right-hand screw)
    ESCO M 5xP0.8 Ball joint (right-hand screw)
    Cell Spacing (mm)  0.8  Dimension (mm)  A:27 B:10 C:11 
    from S$22.99
    Min. 5 days
  14. M16xP1.5  Ball joint (left-hand thread)
    ESCO M16xP1.5 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:64 B:23.5 C:36.5 
    from S$32.99
    Min. 5 days
  15. M14xP2.0  Ball joint (right-hand screw)
    ESCO M14xP2.0 Ball joint (right-hand screw)
    Cell Spacing (mm)  2.0  Dimension (mm)  A:57 B:21.5 C:40.5 
    from S$24.99
    Min. 5 days
  16. M  8xP1.25  Ball joint (right-hand screw)
    ESCO M 8xP1.25 Ball joint (right-hand screw)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:36 B:14 C:17 
    from S$13.99
    Min. 5 days
  17. M10xP1.25  Ball joint (right-hand screw)
    ESCO M10xP1.25 Ball joint (right-hand screw)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:43 B:17 C:20 
    from S$15.99
    Min. 5 days
  18. M14xP1.5  Ball joint (right-hand screw)
    ESCO M14xP1.5 Ball joint (right-hand screw)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:57 B:21.5 C:34.5 
    from S$24.99
    Min. 5 days
  19. M14xP1.5  Ball joint (left-hand thread)
    ESCO M14xP1.5 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:57 B:23.5 C:34.5 
    from S$24.99
    Min. 5 days
  20. M  8xP1.25  Ball joint (left-hand thread)
    ESCO M 8xP1.25 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:37.3 B:13.75 C:17 
    from S$13.99
    Min. 5 days
  21. M10 x P1.5 Ball Joint (Right-Hand Screw)
    ESCO M10 x P1.5 Ball Joint (Right-Hand Screw)
    Cell Spacing (mm)  1.5  Dimension (mm)  A:43 B:17 C:26 
    from S$16.99
    Min. 5 days
  22. M  6xP1.0  Ball joint (left-hand thread)
    ESCO M 6xP1.0 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.0  Dimension (mm)  A:30 B:12.1 C:15 
    from S$13.99
    Min. 5 days
  23. M12xP1.75  Ball joint (left-hand thread)
    ESCO M12xP1.75 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.75  Dimension (mm)  A:50 B:19 C:30 
    from S$22.99
    Min. 5 days
  24. M12xP1.25  Ball joint (right-hand screw)
    ESCO M12xP1.25 Ball joint (right-hand screw)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:50 B:19 C:23 
    from S$22.99
    Min. 5 days
  25. M14xP2.0  Ball joint (left-hand screw)
    ESCO M14xP2.0 Ball joint (left-hand screw)
    Cell Spacing (mm)  2.0  Dimension (mm)  A:57 B:23.5 C:40.5 
    from S$24.99
    Min. 5 days
  26. M12xP1.25  Ball joint (left-hand thread)
    ESCO M12xP1.25 Ball joint (left-hand thread)
    Cell Spacing (mm)  1.25  Dimension (mm)  A:50 B:19 C:23 
    from S$22.99
    Min. 5 days
  27. M 6xP1.0 Ball Joint (Right-Hand Screw)
    ESCO M 6xP1.0 Ball Joint (Right-Hand Screw)
    Cell Spacing (mm)  1.0  Dimension (mm)  A:30 B:11 C:15 
    from S$13.99
    Min. 5 days
  28. M  5xP0.8  Ball joint (left-hand thread)
    ESCO M 5xP0.8 Ball joint (left-hand thread)
    Cell Spacing (mm)  0.8  Dimension (mm)  A:27 B:11.3 C:13 
    from S$22.99
    Min. 5 days
  29. Ball joint L type (left-hand thread type)
    Osaka Spirit Ball joint L type (left-hand thread type)
    Mass (kg)  0.112  Dimension S1 (mm)  11  Dimension d2 (mm)  14  Dimension D1 (mm)  15  Dimension l1 (mm)  15  Dimension S2 (mm)  17  Dimension l2 (mm)  17  Dimension D2 (mm)  19  Dimension L3 (mm)  21  Dimension α (°)  25  Dimension D3 (mm)  27  Dimension d3 (mm)  30  Dimension l3 (mm)  37  Dimension L1 (mm)  43.5  Dimension l (mm)  50.5  Dimension L (mm)  57  Dimension L2 (mm)  6.5  Basic Static Load Rating (kN [kgf])  6.6  Type  Left-hand thread type  Dimension d1 (mm)  M10×1.25 
    Rating:
    94%
    Discontinued
  30. Elbow LHS
    IKO (NIPPON THOMPSON) Elbow LHS
    A stud is friction-welded to a high-precision steel ball, and a special zinc die-cast alloy body is combined so as to hold the spherical part. A stable life can be obtained with a constant clearance while the entire surface of the sliding surface is close to close contact.
    Discontinued
  31. Link ball AL type (Right thread type)
    THK Link ball AL type (Right thread type)
    The holder is molded at right angles to the shank with a ball, which is a specially welded high-precision steel ball and male screw. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance. The weight is greatly reduced by us... Read More
    Dimension W (mm)  10  Dimension M2 (mm)  10(±3)  Mass (g)  12  Dimension D2 (mm)  12  Dimension l (mm)  15  Diameter D (Φmm)  15  Dimension M1 (mm)  21  Yield-point Strength (N)  2250  Height H (mm)  26.7  Dimension L1 (mm)  27  Length L (mm)  34.5  Dimension L2 (mm)  Permissible Tilt Angle (°)  40  Dimension d2 (Φmm)  Static Load Capacity (N)  6470  Dimension l1 (mm)  Dimension B (mm)  Dimension D1 (Φmm)  Dimension d4 (mm)  9.2  Ball Diameter (mm)  9.525  JIS Class  JIS Class 2  Dimension S1 (mm)  M5×0.8  Type  Right-hand thread type 
    Discontinued
  32. Link ball RBL type (Right thread type)
    THK Link ball RBL type (Right thread type)
    A holder is formed at right angles to the shank with a ball, which is a special weld of a steel ball and a male screw.
    JIS Class  JIS Class 2  Type  Right-hand thread type 
    Discontinued
  33. Ball joint Left-hand thread type
    No Brand Ball joint Left-hand thread type
    The ZBL type is used in various industrial machine link mechanisms with rotational and rocking motions. The structure is such that stud bolts and high-precision steel balls are electrically welded, and the rubber cap functions as waterproof, rust preventive, and retains lubricating grease. The bo... Read More
    Discontinued
  34. Ring ball (L type)
    MonotaRO Ring ball (L type)
    A spherical plain bearing with a ball stud that allows smooth operation by bringing the outer diameter of the outer ring into direct contact with the mating side. It has excellent wear resistance and a large swing angle, making it suitable for the link motion mechanism of various automatic machin... Read More
    Dimension d (mm)  10  Mass (g)  113  Dimension B (mm)  14(0-0.3)  Dimension D (mm)  15  Dimension d1 (mm)  15.4  Dimension W (mm)  17(0-0.3)  Dimensions l5 (mm)  17(±0.3)  Dimension D1 (mm)  19  Ball Diameter (Φmm)  19.05  Dimension L2 (mm)  21  Dimension l3 (mm)  21  Dimension l2 (mm)  25  Dimension D2 (mm)  28  Basic static load rating Co (kgf)  2810  Dimensions l4 (mm)  Dimension l1 (mm)  42  Dimension L1 (mm)  43  Angle θ (°)  50  Dimension l (mm)  56  Dimension L (mm)  58  Dimension L3 (mm)  6.5  Dimension S (mm)  M10×1.5  Material  Zinc alloy 
    Rating:
    82%
    Discontinued
  35. Elbow LHSA
    IKO (NIPPON THOMPSON) Elbow LHSA
    The spherical part of the ball stud is covered with a special zinc die-cast alloy body, a dust cover is provided on the stud side, and a compact structure filled with high-quality lithium soap-based grease. It can be operated without lubrication for a long period of time, and has excellent lubric... Read More
    Discontinued
  36. Link ball type RBL (left-hand thread type)
    THK Link ball type RBL (left-hand thread type)
    A holder is formed at right angles to the shank with a ball, which is a special weld of a steel ball and a male screw.
    JIS Class  JIS Class 2  Type  Left-hand thread type 
    Discontinued
  37. Ball joint right-hand thread type
    No Brand Ball joint right-hand thread type
    The ZBL type is used in various industrial machine link mechanisms with rotational and rocking motions. The structure is such that stud bolts and high-precision steel balls are electrically welded, and the rubber cap functions as waterproof, rust preventive, and retains lubricating grease. The bo... Read More
    Angle θ (°)  (Allowable inclination) 50 
    Discontinued
View : Grid List
Filter

37 Item(s)

Set Ascending Direction