All Category

Machine Structural Components

The machine parts category contains the various parts required for machine fabrication. Various parts excluding the power unit and suspension, specifically piping parts such as O-rings and packings, and door parts such as hinges. When manufacturing the structure of the machine body, or when searching for equipment that does not fall into the category of conduction equipment and casters, it will be the category of machine parts. There are subcategories that are further classified under the machine parts, so it is convenient to find the appropriate one from these subcategories.
View : Grid List
Filter

Items 1 - 40 of 26453

Set Ascending Direction
  1. O-Ring P Series (for Dynamic)
    NOK O-Ring P Series (for Dynamic)
    An O-ring is an annular packing with an O-shaped (circular) cross section, which is generally mounted in a groove and compressed appropriately to be used as a seal for a wide variety of fluids such as oil, water, air, and gas.
    Heat Resistance Temperature (℃)  100  Withstand Pressure (MPa)  Hardness  70(±5)°  Type  For dynamic (P type)  Material  NBR-70-1 (type 1 A) NBR Nitrile Rubber 
    Rating:
    95%
    from S$0.47
    Min. 2 days
  2. O-Ring S Type for Static (NBR)
    NOK O-Ring S Type for Static (NBR)
    An O-ring is an annular packing with an O-shaped (circular) cross section, which is generally mounted in a groove and compressed appropriately to be used as a seal for a wide variety of fluids such as oil, water, air, and gas.
    Heat Resistance Temperature (℃)  100  Hardness  70(±5)°  Type  For fixing S type  Material  NBR (Nitrile Rubber) 
    Rating:
    94%
    from S$0.52
    Min. 2 days
  3. O-Ring P (For Dynamic, For Static) Fluoro Rubber
    MASUOKA O-Ring P (For Dynamic, For Static) Fluoro Rubber
    Has heat resistance and chemical resistance. Packing that requires heat resistance, oil resistance, and chemical resistance, corrosion resistant packing in chemical factories, gaskets, diaphragms, tank linings, hoses, pump parts, etc.
    RoHS directive (corresponding to 10 substances)  Heat Resistance Temperature (℃)  200  Withstand Pressure (MPa)  Hardness  70  Type  For fixing P type / for exercise  Specification  Heat and chemical resistant  Material  JIS B 2401 Type 4 D (Fluoro rubber) 
    Rating:
    92%
    from S$0.29
    Min. 2 days
  4. Oil Seal TC Type
    NOK Oil Seal TC Type
    Rating:
    95%
    from S$6.39
    Min. 2 days
  5. Set Collar Standard
    MonotaRO Set Collar Standard
    This is convenient when you want to adjust the position. * Do not use for anything other than its intended purpose.
    Surface Treatment  Black dyed  Material  S45C  Type  Standard 
    Rating:
    95%
    from S$1.89
    Min. 2 days
  6. Grommet with Flame Retardant Film
    TAKIGEN MFG Grommet with Flame Retardant Film
    Uses flame-retardant material (UL94V-0 compliant). You can choose from a wide variety of types according to your needs. It can be set in the hole of the panel with one touch. Non-migratory rubber (contamination test JIS K6267 no abnormality) Distribution board / control board / measuring equipment
    Hardness  50°±5°  Color  Black  Material  EPDM  Feature  Flame retardance  Type  Grommet  Operation Ambient Temperature (℃)  Up to 70  Operating Temperature Range (℃)  Up to 70 
    Rating:
    93%
    from S$0.34
    Min. 2 days
  7. Stud Bolt
    MonotaRO Stud Bolt
    For positioning jigs during mold processing. * Please refrain from using it for any other purpose.
    Material  S45C  Hardness HRC  25~30  Heat Treatment  Yes  Surface Treatment  Homo processing 
    Rating:
    88%
    from S$2.69
    Min. 2 days
  8. Anti-Vibration Pad (Natural Rubber, Rubber Hardness 50)
    Kurashiki Kako Anti-Vibration Pad (Natural Rubber, Rubber Hardness 50)
    Easy to install and move Machines can be easily installed and moved. It can be cut to an appropriate size with scissors and a knife at the site, and it is effective just by laying it under the machine. A special pattern is applied to both sides, which has a large anti-vibration effect, and a rela... Read More
    Rubber hardness  (JIS)50  Support surface pressure (N / mm 2 Specific Vibration Frequency (Hz)  Cut-off frequency (Hz)  Material  Natural rubber (rubber hardness 50) 
    Rating:
    96%
    from S$16.99
    Min. 2 days
  9. T Nut SS (M5)
    SUS T Nut SS (M5)
    Mass (g)  Type  M5  Material  S10C equivalent, UNIQLO plating  Suitable for  SF20 series 
    Rating:
    81%
    from S$0.65
    Min. 2 days
  10. Anti-Vibration Rubber (Male Screw / Female Screw)
    IMAO Anti-Vibration Rubber (Male Screw / Female Screw)
    By attenuating and absorbing vibrations from operating machines, noise and adverse effects on adjacent machines are prevented, and the life of machinery and equipment is extended.
    Suitable Usage  Anti-vibration  Color (Body)  Black  Type of Connection  Female thread / male thread  Material (Anti-Vibration Rubber)  Natural rubber  Shape  Round type 
    Rating:
    88%
    from S$2.19
    Min. 2 days
  11. Aluminum Extrusion 3030 Type Standard
    ACE Aluminum Extrusion 3030 Type Standard
    Mass (kg/m)  0.98  Number of Flutes  1 row groove x 1 row groove  Yield Strength (N/mm2 215 or more  Tensile Strength (N/mm2 245 or more  Frame Width (mm)  30  Size (mm)  30×30  Cross-sectional Area (mm 2 327  Type  4-sided groove  Elongation (%)  8 or more  Material (Main Unit)  A6063S-T5  Shape  Square  Surface Treatment (Main Unit)  White anodized 
    Rating:
    92%
    from S$11.99
    Min. 2 days
  12. Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    TRUSCO Key Material S45C (New JIS Parallel Double-Sided Square Key Standard Product)
    You can cut it to the required length and use it. A detent for the joint between the shaft of a motor or reducer and the gear or sprocket.
    Tolerance  JIS B 1301  Length (mm)  300  Shape  Double-sided key 
    Rating:
    97%
    from S$2.39
    Min. 2 days
  13. Aluminum frame nut / holder set (rear insertion type) □ 30 series
    ACE Aluminum frame nut / holder set (rear insertion type) □ 30 series
    Set Contents  Nut holder, nut holder HA06WH (white)  Surface Treatment  Square nut / fabric  Suitable for  □ 30 series 
    Rating:
    92%
    from S$24.99
    Min. 2 days
  14. Aluminum Extrusion 2020 Type Standard
    ACE Aluminum Extrusion 2020 Type Standard
    Mass (kg/m)  0.53  Number of Flutes  1 row groove x 1 row groove  Cross-sectional Area (mm 2 194.7  Frame Width (mm)  20  Size (mm)  20×20  Yield Strength (N/mm2 215 or more  Tensile Strength (N/mm2 245 or more  Type  4-sided groove  Elongation (%)  8 or more  Material (Main Unit)  A6063S-T5  Shape  Square  Surface Treatment (Main Unit)  White anodized 
    Rating:
    66%
    from S$6.79
    Min. 2 days
  15. Revolving Grip
    MonotaRO Revolving Grip
    * Do not use for anything other than its intended purpose.
    Dimension E (mm)  10  Color  Black  Material (Screw)  Iron  Material (handle)  Unsaturated polyester resin 
    Rating:
    91%
    from S$3.79
    Min. 2 days
  16. Rubber Edge Trim
    Iwata Mfg. Rubber Edge Trim
    A compact trim that is easy to cut and bend because there is no core metal.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    93%
    from S$5.69
    Min. 2 days
  17. Press Spring Material Spring Hard Steel Wire SWC Unichrome Plated
    SHK Press Spring Material Spring Hard Steel Wire SWC Unichrome Plated
    Electronic parts, electrical appliances, toys, industrial equipment, etc. * Please do not use it in a deformed or damaged state.
    Material  Spring hard wire SWC UNIQLO 
    Rating:
    83%
    from S$3.59
    Min. 2 days
  18. Anti-Vibration Rubber Mat
    WAKI Anti-Vibration Rubber Mat
    It is highly wear resistant and elastic, and has excellent mechanical properties. The ground plane is slightly yellowed. It cannot be used in places where petroleum or chemicals come into contact. Please use within -20 ℃ ~ + 60 ℃. For vibration isolation of washing machines, audio, outdoor units... Read More
    RoHS directive (corresponding to 10 substances)  Rubber hardness  60±5  Thickness (mm)  Material  NR (natural rubber) 
    Rating:
    100%
    from S$3.49
    Min. 2 days
  19. T Slot Bolt
    SUPER TOOL T Slot Bolt
    A bolt diameter of the same size as the table T-groove can be used. A special bolt made by precision forging carbon steel. For fixing the clamp (jig tool) to the table.
    Specification  Precision forged special bolt 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  20. Dowel Pin Type A
    Ohkita Dowel Pin Type A
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  +0.005~+0.010  RoHS directive (corresponding to 10 substances)  Hardness  HRC58~62  Material  SCM445 
    Rating:
    96%
    from S$0.19
    Min. 2 days
  21. Round Anti-Vibration Rubber (Bolt & Plate Type)
    Kurashiki Kako Round Anti-Vibration Rubber (Bolt & Plate Type)
    It has a simple structure and is easy to install. It is small and has a relatively large spring constant, so it can support a large load. Depending on the mounting method, it can be used not only in the compression direction and shear direction but also in the tilt direction, and has wide applica... Read More
    Suitable Usage  Anti-vibration  Included Accessories  Hexagon nut and spring washer one each  Type of Connection  Male screw / plate  Material (Anti-Vibration Rubber)  Natural rubber  Shape  Round type 
    Rating:
    80%
    from S$4.39
    Min. 2 days
  22. Aluminum Extrusion 4040 Type Standard
    ACE Aluminum Extrusion 4040 Type Standard
    Number of Flutes  1 row groove x 1 row groove  Mass (kg/m)  1.693  Yield Strength (N/mm2 215 or more  Tensile Strength (N/mm2 245 or more  Type  4-sided groove  Frame Width (mm)  40  Size (mm)  40×40  Cross-sectional Area (mm 2 627  Elongation (%)  8 or more  Material (Main Unit)  A6063S-T5  Shape  Square  Surface Treatment (Main Unit)  White anodized 
    Rating:
    90%
    from S$16.99
    Min. 2 days
  23. Anti-Vibration Pad
    TRUSCO Anti-Vibration Pad
    The range of working load is wide, and stable anti-vibration effect can be obtained regardless of the size of the load. It is easy to process and can be used simply by cutting V-grooves with 50 mm intervals with a utility knife. For equipment that generates various vibrations and noise, such as m... Read More
    Operating Temperature Range  -5~70℃  Rubber hardness  55°±5  Material  Natural rubber (NR) 
    Rating:
    81%
    from S$0.96
    Min. 2 days
  24. Compression Coil Spring DC Series
    Accurate Compression Coil Spring DC Series
    This standard is arranged by adding our own control items (reference load) with reference to the German standard (DIN2098) compression spring that is popular in Europe. For OA equipment, electronic parts, automobile parts, electrical appliances, toys, industrial equipment, etc.
    RoHS directive (corresponding to 10 substances)  Spring Type  Compression coil spring 
    Rating:
    97%
    from S$24.99
    Min. 2 days
  25. Hard bracket S
    SUS Hard bracket S
    Mass (g)  44  Suitable for  SF30 series 
    Rating:
    80%
    from S$2.49
    Min. 2 days
  26. Aluminum rail SSRA (no hole type)
    No Brand Aluminum rail SSRA (no hole type)
    As a mounting rail for sensor switches of FA equipment, as other auxiliary members * No holes are drilled. Please process it in any place and use it.
    Material  A6063S-T5  Surface Treatment  White anodized 
    Rating:
    84%
    from S$6.99
    Min. 2 days
  27. Anti-Vibration Pad (Natural Rubber Rubber Hardness 60, 75)
    Kurashiki Kako Anti-Vibration Pad (Natural Rubber Rubber Hardness 60, 75)
    Easy to install and move. Great vibration isolation effect. Great soundproofing effect. Wide working load range. Excellent life. Economical. Refrigerator, chilling unit, heat pump, cooling tower, condenser, air handling unit, packaged air conditioner, blower, pump, compressor, fan, transformer, m... Read More
    Allowable Surface Pressure (N/mm2 1.1  Material  Natural rubber 
    Rating:
    87%
    from S$12.99
    Min. 2 days
  28. U Type Dustproof Rubber
    TOCHIGIYA U Type Dustproof Rubber
    Since the cross-sectional shape is U-shaped, it holds the mounting plate firmly and enhances the airtightness. Instrumentation, control panels, machine tools, home appliances, medical equipment, furniture, office equipment, etc.
    RoHS directive (corresponding to 10 substances)  Surface Treatment  Black  Material  Chloroprene sponge 
    from S$8.69
    Min. 2 days
  29. Cartridge Heater "HI-SD Rod"
    Sakaguchi E.H VOC Cartridge Heater "HI-SD Rod"
    We have many years of sales experience as a pioneer of cartridge heaters. We also handle products that comply with UL / CSA standards. Standard heaters are manufactured with an internal temperature of 680 ° C. Since the lead part is firmly crimped, it has a structure that can sufficiently withsta... Read More
    Heat Resistance Temperature (℃)  (Lead wire) 200  Maximum Diameter (Φmm)  -0.05/-0.15 
    from S$45.99
    Min. 2 days
  30. Aluminum frame 2040 type
    ACE Aluminum frame 2040 type
    Mass (kg/m)  0.85  Number of Flutes  1 row groove x 2 row groove  Frame Width (mm)  20  Size (mm)  20×40  Yield Strength (N/mm2 215 or more  Tensile Strength (N/mm2 245 or more  Cross-sectional Area (mm 2 313.8  Type  4-sided groove  Elongation (%)  8 or more  Material (Main Unit)  A6063S-T5  Shape  Rectangle  Surface Treatment (Main Unit)  White anodized 
    Rating:
    70%
    from S$10.99
    Min. 2 days
  31. Aluminum Frames 3060 Type Standard Size Product
    ACE Aluminum Frames 3060 Type Standard Size Product
    Number of Flutes  1 row groove x 2 row groove  Mass (kg/m)  1.666  Yield Strength (N/mm2 215 or more  Tensile Strength (N/mm2 245 or more  Frame Width (mm)  30  Size (mm)  30×60  Type  4-sided groove  Cross-sectional Area (mm 2 542.4  Elongation (%)  8 or more  Material (Main Unit)  A6063S-T5  Shape  Rectangle  Surface Treatment (Main Unit)  White anodized 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  32. Constant Load Spring C Type
    SAMINI Constant Load Spring C Type
    A spring that can always be pulled back and forth with a constant force.
    Spring Type  Constant load spring  Material  SUS301-CSP 
    Rating:
    89%
    from S$22.99
    Min. 2 days
  33. Super Knob
    NBK (Nabeya Bi-tech Kaisha) Super Knob
    Any manufacturer or material can be used as long as there are 3 types of commercially available hexagon bolts and hexagon nuts. You can easily create a knob just by inserting it. Especially in the case of hexagon bolts, the screw length can be freely selected. * For female screw knobs, pay attent... Read More
    Color  (Knob) black  Material (Cap)  Nylon 66  Material (Main Unit)  Nylon 66  Type  Polygon 
    Rating:
    86%
    from S$1.59
    Min. 2 days
  34. Step Clamp
    NABEYA Step Clamp
    Used as a pair with a step block
    RoHS directive (corresponding to 10 substances)  Surface Treatment  Black dyed  Heat Treatment  Quenching  Material  S45C 
    Rating:
    90%
    from S$35.99
    Min. 2 days
  35. Screwed rubber cushion
    WAKI Screwed rubber cushion
    With outstanding elasticity, it absorbs shocks and prevents sounds and scratches. Uses a non-transferable material that does not easily transfer colors. Since it uses EPDM rubber, it has excellent weather resistance compared to natural rubber. We use environmentally friendly and safe materials th... Read More
    RoHS directive (corresponding to 10 substances)  Color  Black  Material (Anti-Vibration Rubber)  Non-migrating EPDM rubber  Type of Connection  Round hole  Shape  Round type  Suitable Usage  Soundproofing / preventing scratches  Feature  Weatherability 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  36. Φ 8 bracket for stainless gas spring
    Geo. Prince Takeshita Φ 8 bracket for stainless gas spring
    Made of stainless steel, it has excellent corrosion resistance and heat resistance. * Mounting screws are not included. Please prepare separately.
    RoHS directive (corresponding to 10 substances)  Mass (g)  61  Finish  Electrolytic polishing  Mounting Screw  M6 flat head screw head  Material  Stainless steel plate (SUS-304) 
    Rating:
    90%
    from S$7.79
    Min. 2 days
  37. My Lock
    TOCHIGIYA My Lock
    It is a cam lock that is more than two times smaller than the conventional pipe key type cam lock. It is much more compact than the plate key type cylinder lock. Ideal for compactness and security of all devices and systems.
    RoHS directive (corresponding to 10 substances)  Key number  225  Mass (g)  31.4 
    Rating:
    97%
    from S$11.99
    Min. 2 days
  38. 16 x 8 strut profile 5
    IMAO 16 x 8 strut profile 5
    Sectional moment of inertia lx (cm 4 0.06  Section moment of inertia ly (cm 4 0.23  Cross Sectional Area (cm2 0.82  Dimension (mm)  16×8  Mass (g)  220/m  Material (Main Unit)  Al (equivalent to JIS6 N01)  Surface Treatment (Main Unit)  Anodized surface treatment  Color (Body)  Natural 
    Rating:
    95%
    from S$16.99
    Min. 2 days
  39. Slide Rail Mini Bearing Type
    HILOGIK Slide Rail Mini Bearing Type
    Thin and light! Can slide back and forth! It is a double travel type that slides in both directions from the stowed state. It can be installed immediately with screws. For replacement of drawer parts and furniture production * When placed flat, the load capacity will be 1/4. * The number of stage... Read More
    Dimension (mm)  (Leave) 74  Number of Tiers  Rated Load (N)  98 (per 2 pieces)  Type  Slide type  Material (Rail)  Steel  surface treatment (rail)  Zinc plating 
    Rating:
    93%
    from S$8.79
    Min. 2 days
  40. Oil Level Gauge "OIL POT MADO" (Drive Type)
    Koho Kosan Oil Level Gauge "OIL POT MADO" (Drive Type)
    The transparent body is made of ultra-hard special synthetic resin, so it will not be damaged by any impact. The reflector is white, and you can clearly see the red letters and lines of "H" and "L" even in a slightly dark place. Since the reflector has the property of repellin... Read More
    Heat Resistance Temperature (℃)  100  Trusco Part No.  102-8511  Dimension D (mm)  12  Dimension F (mm)  16  Dimension E (mm)  Mounting Hole Diameter (Φmm)  20.5±0.2  Dimension A (mm)  21  Dimension B (mm)  22  Mass (g)  Dimension G (mm)  Dimension C (mm)  Type  HL type  Shape  Round type 
    Rating:
    100%
    from S$6.39
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 26453

Set Ascending Direction