All Category

Hinges

View : Grid List
Filter

Items 1 - 40 of 290

Set Ascending Direction
  1. Free Stop Hinge
    TOCHIGIYA Free Stop Hinge
    A hinge that can stand still at any angle. The effective torque range is 180 ° from the mounting surface. Medical equipment, audio equipment, etc. * Please use 2 or less per lid. * Install this product with the shaft horizontal. * Set the mounting panel so that the P / Q dimension part of the hin... Read More
    RoHS directive (corresponding to 10 substances)  Operating Temperature Range (℃)  5~40 
    Rating:
    95%
    from S$7.39
    Min. 2 days
  2. Air damper
    MATEX Air damper
    It is a direct acting type air damper. It can be used for sliding doors with a self-closing function, and the air pressure can be adjusted by turning the screw at the end. Easy to install due to its compact design. Achieved weight reduction by using resin for the internal rod. Air pressure can be... Read More
    RoHS directive (corresponding to 10 substances)  Maximum Stroke (mm)  267  Mounting Screw Spacing (mm)  379  Type  Regular type 
    Rating:
    95%
    from S$77.99
    Min. 2 days
  3. Air damper
    TAKIGEN MFG Air damper
    The reaction force is applied in the direction in which the rod contracts, not in the direction in which it expands. By adopting a special adjustment mechanism, the damper force can be finely adjusted with the needle valve. It is lightweight because it uses mainly resin. Compact design for easy i... Read More
    Operating Temperature Range (℃)  -10~60  Tensile Load (N)  0.5 or less 
    Rating:
    100%
    from S$69.99
    Min. 2 days
  4. Soft Absorber
    TOCHIGIYA Soft Absorber
    Resin is used as the main material to achieve small size and low cost. Home appliances / housing equipment / OA equipment * Please use in combination with an external stopper. * Please ensure sufficient mounting strength of the product. (As a guide, about 2 to 3 times the maximum efficacy value) ... Read More
    Maximum Energy Absorption (J)  0.5  RoHS directive (corresponding to 10 substances)  Maximum Speed (m/sec)  Operating Temperature Range (℃)  5~40 
    Rating:
    85%
    from S$4.79
    Min. 2 days
  5. Hinge pin with groove
    TOCHIGIYA Hinge pin with groove
    It can be widely used as a shaft for various hinges. Distribution board, distribution board, other various hinges, etc.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    100%
    from S$0.42
    Min. 2 days
  6. Stainless Steel Flat Torque Hinge
    TAKIGEN MFG Stainless Steel Flat Torque Hinge
    Hold the door at any angle. A neat flat hinge type with no protrusions on the outside. Since it uses the friction of resin, it does not emit metal powder or abnormal noise. The default torque can be maintained for many years. Indoor equipment such as office equipment and furniture
    Operating Temperature Range (℃)  0~40  Endurance Times  20,000 times or more (at rated torque)  Material (Fan Blade)  Cold rolled stainless steel (SUS304)  Surface finish  Gloss barrel polishing  Material (Plug)  Polyacetal (POM)  Material (Shaft)  Stainless steel bar (SUS303) 
    Rating:
    95%
    from S$7.99
    Min. 2 days
  7. Small Flat Torque Hinge
    TAKIGEN MFG Small Flat Torque Hinge
    Hold the door at any angle. The outer shape is a clean flat hinge type with no protrusions. Since the friction of the resin is used, no metal powder or abnormal noise is generated. Office equipment / furniture / control panel * When installing, keep the shafts horizontal, and when using two, make... Read More
    Operating Temperature Range (℃)  0~40  Material (Fan Blade)  Polyacetal (POM)  Material (Shaft)  Stainless steel bar (SUS303) 
    Rating:
    60%
    from S$3.69
    Min. 2 days
  8. Flat torque hinge (L72 × W56)
    TAKIGEN MFG Flat torque hinge (L72 × W56)
    Hold the door at any angle. The torque can be changed by turning the adjustment bolt. Uses flame-retardant material. (Main unit POM / UL94HB, Axis PC / UL94V-2) Canopy, server rack, office equipment, furniture, etc. front lid, canopy (horizontal use)
    Rated torque (Nm)  (2) 0-4  Dimension H4 (mm)  Dimension H3 (mm)  10  Dimension d2 (Φmm)  14  Dimension H1 (mm)  19  Dimension L2 (mm)  21  Dimension L3 (mm)  30  Dimension P1 (mm)  38  Dimension P2 (mm)  47.5  Dimension W (mm)  56  Mass (g)  57  Dimension H2 (mm)  Dimension M  Dimension d1 (Φmm)  6.6  Dimension L1 (mm)  72  Material (Main Unit)  Polyacetal (POM / UL94-HB)  Material (Shaft)  Polycarbonate (PC / UL94V-2)  Material (Screw)  Stainless steel (SUS)  Material (Nut)  Stainless steel (SUS)  Surface finish  Texture processing 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  9. Self-Door Closing Eco Catch
    DAIKEN Self-Door Closing Eco Catch
    Since the door closes slowly, the banging noise is reduced, which is effective for soundproofing. If the pull-in function is turned off, the door can always be used in a free state. It is possible to change the recombination of left and right hand. It prevents the door from rebounding and closes ... Read More
    Operating Temperature Range (℃)  0~40  Applicable door mass (kg)  12~30  Width (mm)  136  Height (mm)  33  Mass (g/set)  457  Mass (g)  457  Length (mm)  46  Dimensions, Width W x Depth D x Height H (mm)  Catch parts / 184 × 20 × 16  Type  Open door retract type  Color  Gold 
    Rating:
    86%
    from S$64.99
    Min. 2 days
  10. Stainless Hinge Pins
    TOCHIGIYA Stainless Hinge Pins
    It can be widely used as a shaft for various hinges. Anti-corrosion measures for iron hinge pins, rotating shafts for mechanical parts, and other general use
    RoHS directive (corresponding to 10 substances)  Material  SUSXM7 
    Rating:
    100%
    from S$1.39
    Min. 2 days
  11. Stainless steel flat torque hinge
    TAKIGEN MFG Stainless steel flat torque hinge
    Made of stainless steel and has excellent corrosion resistance. Since it does not use metal friction, it does not generate metal powder or abnormal noise. Hinge torque is largely unaffected by ambient temperature. The default torque can be maintained for many years. Indoor equipment such as offic... Read More
    Surface finish  Gloss barrel polishing  Material (Plug)  Polyacetal (POM) 
    Rating:
    87%
    from S$8.49
    Min. 2 days
  12. Adjustable Torque Hinge
    Geo. Prince Takeshita Adjustable Torque Hinge
    Opening and closing can be held at any position. The torque can be adjusted. General equipment * Mounting screws are not included. Please prepare separately.
    RoHS directive (corresponding to 10 substances)  Finish  Black 
    Rating:
    87%
    from S$4.29
    Min. 2 days
  13. Flat torque hinge (L50 × W37)
    TAKIGEN MFG Flat torque hinge (L50 × W37)
    Hold the door at any angle. The torque can be changed by turning the adjustment bolt. Uses flame-retardant material. (Main unit POM / UL94HB, Axis PC / UL94V-2) Canopy, server rack, office equipment, furniture, etc. front lid, canopy (horizontal use)
    Rated torque (Nm)  (2) 0-1  Dimension H4 (mm)  1.5  Dimension H1 (mm)  13.5  TAKIGEN code  13271  Dimension L2 (mm)  14.5  Mass (g)  20  Dimension L3 (mm)  21  Dimension P1 (mm)  25.5  Dimension P2 (mm)  31.5  Dimension W (mm)  37  Dimension M  Dimension d1 (Φmm)  4.5  Dimension H2 (mm)  Dimension L1 (mm)  50  Dimension H3 (mm)  Dimension d2 (Φmm)  Color  Black  Material (Main Unit)  Polyacetal (POM / UL94-HB)  Material (Shaft)  Polycarbonate (PC / UL94V-2)  Material (Screw)  Stainless steel (SUS)  Material (Nut)  Stainless steel (SUS)  Surface finish  Texture processing 
    Rating:
    80%
    from S$9.69
    Min. 2 days
  14. Auto Hinge
    TOCHIGIYA Auto Hinge
    The lid opens lightly by the operation of the coil spring.
    RoHS directive (corresponding to 10 substances)  Mass (g)  97.4 
    Rating:
    90%
    from S$10.99
    Min. 2 days
  15. Door Closes quietly Aiwa Metal Silent damper for doors With die-cast surface
    AIWA METALS Door Closes quietly Aiwa Metal Silent damper for doors With die-cast surface
    Rating:
    80%
    from S$7.19
    Min. 2 days
  16. Soft damper
    TAKIGEN MFG Soft damper
    Appropriate shock absorption characteristics can be obtained. Made of resin, it is small and lightweight.
    Speed range (m / s)  0.5 or less  Material  Polyacetal (POM)  TAKIGEN code  13385  Piston rod return force (N)  3 or less  Operating Temperature Range (℃)  5~40  Maximum Energy Absorption (J)  0.8 
    from S$3.69
    Min. 2 days
  17. 2-axis free stop hinge
    TOCHIGIYA 2-axis free stop hinge
    A hinge that can stand still at any angle. With 2 axes, it stops at any position in front, back, left and right.
    RoHS directive (corresponding to 10 substances)  Mass (g)  289 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  18. TK soft close unit
    Takachiho Koheki TK soft close unit
    A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer.
    RoHS directive (corresponding to 10 substances)  Recommended Screw  A trapping 3  Material  Case: ABS, Runner: Nylon, Spring: SWP-B  Color  Gray  Type  Oil damper 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  19. Biaxial free stop hinge
    TOCHIGIYA Biaxial free stop hinge
    There are two hinges that can be stopped at any angle, and it stops at any position in the front, back, left and right. Since the main body has a hole for wiring, it is easy to wire the monitor. Display, OA equipment, various display screens, etc. * Use within the specified torque value. Do not a... Read More
    RoHS directive (corresponding to 10 substances)  Mass (g)  445 
    Rating:
    60%
    from S$38.99
    Min. 2 days
  20. Rotary damper
    TAKIGEN MFG Rotary damper
    from S$15.99
    Min. 2 days
  21. Adjustable flat torque hinge (L = 50)
    TAKIGEN MFG Adjustable flat torque hinge (L = 50)
    Hold the door at any angle. Since it does not use metal friction, it does not generate metal powder or abnormal noise. The torque value can be changed with the adjustment nut. Made of stainless steel and has excellent corrosion resistance. Indoor equipment such as office equipment, furniture, con... Read More
    Operating Temperature Range (℃)  0~40  TAKIGEN code  13269  Surface finish  Gloss barrel polishing  Material (Shaft)  Stainless steel bar (SUS303)  Material (Plug)  Polyacetanol (POM) 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  22. Free Stop Hinge
    TOCHIGIYA Free Stop Hinge
    Rating:
    100%
    from S$6.89
    Min. 2 days
  23. Stainless steel pin (Φ6 × L55)
    TAKIGEN MFG Stainless steel pin (Φ6 × L55)
    Dimension D2 (Φmm)  12  TAKIGEN code  11613  Material  Stainless steel bar (SUS304)  Dimension L2 (mm)  52  Dimension L1 (mm)  55  Mass (g)  14  Dimension d (Φmm)  Dimension t (mm)  Dimension D1 (Φmm) 
    from S$2.69
    Min. 2 days
  24. Stainless steel pin (Φ8 × L113)
    TAKIGEN MFG Stainless steel pin (Φ8 × L113)
    Material  Stainless steel bar (SUS304)  Dimension D2 (Φmm)  14  Mass (g)  47  Dimension L2 (mm)  110  Dimension D1 (Φmm)  Dimension t (mm)  TAKIGEN code  10706  Dimension L1 (mm)  113  Dimension d (Φmm) 
    from S$4.19
    Min. 2 days
  25. Stainless steel pin (Φ10 × L113)
    TAKIGEN MFG Stainless steel pin (Φ10 × L113)
    Dimension D2 (Φmm)  16  TAKIGEN code  10705  Dimension D1 (Φmm)  10  Dimension L2 (mm)  110  Material  Stainless steel bar (SUS304)  Dimension t (mm)  Mass (g)  73  Dimension L1 (mm)  113  Dimension d (Φmm) 
    from S$5.69
    Min. 2 days
  26. Torque hinge (stainless steel)
    Shibutani Torque hinge (stainless steel)
    A hinge that can hold the door at any angle. The torque value can be selected from three types: 0.3N ・ m, 0.8N ・ m, and 1.5N ・ m. All mechanical parts such as washers are made of stainless steel and have excellent corrosion resistance. Both horizontal and vertical use are possible. There are t... Read More
    Operating Temperature Range  0℃~40℃  RoHS directive (corresponding to 10 substances)  Finish  Gloss barrel  Material  Stainless steel (SUS304) 
    from S$7.79
    Min. 5 days
  27. Wing damper
    TOCHIGIYA Wing damper
    Softly close the lid and cover of the BOX. AV equipment, communication equipment, measuring equipment, various storage cases * The operating angle of the damper is 110 °. Be sure to provide an external stopper as rotating it any further may damage the damper.
    Operating Temperature Range (℃)  -5~50  RoHS directive (corresponding to 10 substances)  Mass (g)  12±1  Surface Treatment  Black  Parts Name  Case, case cap, rotating shaft, oil  Material  PBT, PPS, silicone oil 
    Rating:
    67%
    from S$15.99
    Min. 2 days
  28. Free stop hinge (adjustable)
    TOCHIGIYA Free stop hinge (adjustable)
    A free stop hinge that can adjust the operating torque. Compatible with TH-125-1 ・ 2 ・ 3. (Excluding the torque effective range.) Trial built-in survey before mass production * Install this product with the shaft in the horizontal direction. * Please use 2 or less hinges per lid. Also, when usi... Read More
    Initial Torque Value (Normal Temperature) N・m(kgf・cm)  (Setting) 0.34 ± 0.1 [3.5 ± 1]  Operating Temperature Range (℃)  -5~40  Torque Adjustment Range (Nm)  0.25 to 1.96 (normal temperature)  RoHS directive (corresponding to 10 substances)  Mass (g)  68.8  Specification  Torque effective range / approx. 125 ° 
    Rating:
    90%
    from S$24.99
    Min. 2 days
  29. Auto Hinges
    TOCHIGIYA Auto Hinges
    The lid opens lightly due to the operation of the coil spring. OA equipment, audio equipment, etc. * When using two or more at the same time, be careful of the center deviation of the hinge rotation axis. * Install the shaft in a horizontal position.
    RoHS directive (corresponding to 10 substances)  Mass (g)  36.4 
    from S$6.49
    Min. 2 days
  30. Stainless steel pin (Φ5 × L80)
    TAKIGEN MFG Stainless steel pin (Φ5 × L80)
    Dimension L2 (mm)  77  TAKIGEN code  10708  Dimension L1 (mm)  80  Dimension d (Φmm)  Dimension t (mm)  Mass (g)  14  Material  Stainless steel bar (SUS304)  Dimension D1 (Φmm)  Dimension D2 (Φmm)  10 
    from S$2.09
    Min. 2 days
  31. Adjustable flat torque hinge (L = 90)
    TAKIGEN MFG Adjustable flat torque hinge (L = 90)
    Hold the door at any angle. Since it does not use metal friction, it does not generate metal powder or abnormal noise. The torque value can be changed with the adjustment nut. Made of stainless steel and has excellent corrosion resistance. Indoor equipment such as office equipment, furniture, con... Read More
    Surface finish  Gloss barrel polishing  TAKIGEN code  13268  Material (Shaft)  Stainless steel bar (SUS303)  Operating Temperature Range (℃)  0~40  Material (Plug)  Polyacetanol (POM) 
    from S$39.99
    Min. 2 days
  32. Free stop hinge
    TOCHIGIYA Free stop hinge
    Since it uses the frictional resistance of the resin material, it is a hinge that wears less, is less likely to generate metal powder, abnormal noise, etc., and can stand still at any angle. Medical equipment, OA equipment, audio equipment, etc. * Do not crimp the hinges and brackets later. * Ple... Read More
    RoHS directive (corresponding to 10 substances) 
    Rating:
    70%
    from S$4.99
    Min. 2 days
  33. Pin (Φ8 × L100)
    TAKIGEN MFG Pin (Φ8 × L100)
    Mass (g)  43  Dimension D2 (Φmm)  14  Dimension L2 (mm)  97  Dimension d (Φmm)  Dimension D1 (Φmm)  Dimension t (mm)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  11586  Dimension L1 (mm)  100 
    from S$1.69
    Min. 2 days
  34. Air damper (short type)
    MATEX Air damper (short type)
    It is a direct acting type air damper. It can be used for sliding doors with a self-closing function, and the air pressure can be adjusted by turning the screw at the end.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    100%
    from S$77.99
    Min. 2 days
  35. Stainless steel pin (Φ8 × L100)
    TAKIGEN MFG Stainless steel pin (Φ8 × L100)
    TAKIGEN code  11606  Dimension d (Φmm)  Mass (g)  43  Dimension D1 (Φmm)  Dimension t (mm)  Dimension L1 (mm)  100  Dimension D2 (Φmm)  14  Material  Stainless steel bar (SUS304)  Dimension L2 (mm)  97 
    Rating:
    100%
    from S$4.39
    Min. 2 days
  36. Magnet for air damper
    MATEX Magnet for air damper
    A magnet that catches the tip of the rod. Used for pulling out the piston rod.
    RoHS directive (corresponding to 10 substances)  Material  Magnet: Ba ferrite 
    from S$9.29
    Min. 2 days
  37. Torque adjustable damper hinge
    TAKIGEN MFG Torque adjustable damper hinge
    Appropriate damper characteristics can be obtained within a rotation range of 110 °. Bus / train hat rack / service box
    Operating Temperature Range (℃)  0~40  Standard Color  Black  Material  Polybutylene terephthalate (PBT) 
    from S$26.99
    Min. 5 days
  38. Thin damper
    TOCHIGIYA Thin damper
    A shock absorbing part that utilizes the viscosity of oil. It is possible to open and close and reciprocate the lid and door smoothly and quietly (2WAY specification). Automobile interior parts, audio equipment, home appliances, OA equipment, office equipment, etc.
    RoHS directive (corresponding to 10 substances)  Parts Name  Housing, cap, rotor, gear, O-ring, oil  Material  PC, POM, silicon rubber, silicon 
    from S$2.19
    Min. 5 days
  39. Engineering plastic torque hinge
    IMAO Engineering plastic torque hinge
    The opening position of the door can be fixed at any position. In addition, the opening and closing torque force of the door can be adjusted. Flame-retardant UL94-HB certified.
    Operating Temperature Range (℃)  -5~65  Material (Main Unit)  Polyacetal  Material (Pin)  Polycarbonate  Material (adjustment screw)  SUS303  Material (boss)  SUS303  Turning angle (°)  Up to 275 
    from S$19.99
    Min. 2 days
  40. Rotary Damper FRT / FRN-C2 Series
    FUJI LATEX Rotary Damper FRT / FRN-C2 Series
    from S$4.79
    Min. 13 days
View : Grid List
Filter

Items 1 - 40 of 290

Set Ascending Direction