All Category

O-Rings

O-rings are annular rubber packings used for pumps, hoses, gaskets, tank linings, diaphragms, etc. Used to prevent fluids such as water, oil, gas, chemicals, etc. flowing through machines such as pumps and hoses from leaking outside. Most of them are made of nitrile rubber or synthetic rubber, and there are two types for S-type fixation and P-type exercise. In addition, some products have different hardness and heat-resistant temperature, and some have excellent oil resistance, wear resistance, and aging resistance.
View : Grid List
Filter

Items 1 - 40 of 337

Set Ascending Direction
  1. O-Ring P Series (for Dynamic)
    NOK O-Ring P Series (for Dynamic)
    An O-ring is an annular packing with an O-shaped (circular) cross section, which is generally mounted in a groove and compressed appropriately to be used as a seal for a wide variety of fluids such as oil, water, air, and gas.
    Heat Resistance Temperature (℃)  100  Withstand Pressure (MPa)  Hardness  70(±5)°  Type  For dynamic (P type)  Material  NBR-70-1 (type 1 A) NBR Nitrile Rubber 
    Rating:
    95%
    from S$0.47
    Min. 2 days
  2. O-Ring S Type for Static (NBR)
    NOK O-Ring S Type for Static (NBR)
    An O-ring is an annular packing with an O-shaped (circular) cross section, which is generally mounted in a groove and compressed appropriately to be used as a seal for a wide variety of fluids such as oil, water, air, and gas.
    Heat Resistance Temperature (℃)  100  Hardness  70(±5)°  Type  For fixing S type  Material  NBR (Nitrile Rubber) 
    Rating:
    94%
    from S$0.52
    Min. 2 days
  3. O-Ring P (For Dynamic, For Static) Fluoro Rubber
    MASUOKA O-Ring P (For Dynamic, For Static) Fluoro Rubber
    Has heat resistance and chemical resistance. Packing that requires heat resistance, oil resistance, and chemical resistance, corrosion resistant packing in chemical factories, gaskets, diaphragms, tank linings, hoses, pump parts, etc.
    Heat Resistance Temperature (℃)  200  Withstand Pressure (MPa)  Hardness  70  Type  For fixing P type / for exercise  Specification  Heat and chemical resistant  Material  JIS B 2401 Type 4 D (Fluoro rubber) 
    Rating:
    92%
    from S$0.29
    Min. 2 days
  4. O-Ring P (Dynamic, Static) NBR
    MASUOKA O-Ring P (Dynamic, Static) NBR
    Good oil resistance, wear resistance, and aging resistance. Oil resistant products such as oil seals, gaskets, oil resistant hoses, conveyor belts, printing rolls, and spinning top rolls.
    Heat Resistance Temperature (℃)  120  Withstand Pressure (MPa)  Hardness  70±5  Material  NBR (Nitrile Rubber) 
    Rating:
    93%
    from S$0.28
    Min. 2 days
  5. O-Ring G Series (for Static)
    NOK O-Ring G Series (for Static)
    An O-ring is an annular packing with an O-shaped (circular) cross section, which is generally mounted in a groove and compressed appropriately to be used as a seal for a wide variety of fluids such as oil, water, air, and gas.
    Heat Resistance Temperature (℃)  100  Hardness  70(±5)°  Type  For fixing G type  Material  NBR-70-1 (Type 1 A) NBR nitrile rubber 
    Rating:
    92%
    from S$1.09
    Min. 2 days
  6. O-Ring AS568 (ARP568) (for Static, for Aircraft O-Ring Hydraulics) NBR
    NOK O-Ring AS568 (ARP568) (for Static, for Aircraft O-Ring Hydraulics) NBR
    It is widely used as a sealing material for various items, and has the best balance of performance and workability.
    Operating Temperature Range (℃)  -24~100(MAX120)  Hardness (Durometer A)  70±5  Material symbol  A305  Material  NBR (Nitrile Rubber) 
    Rating:
    95%
    from S$0.29
    Min. 2 days
  7. O-Ring ISO Type
    NOK O-Ring ISO Type
    Rating:
    96%
    from S$0.34
    Min. 2 days
  8. O-Ring P Series (Static, Dynamic)
    NOK O-Ring P Series (Static, Dynamic)
    It has the best heat resistance, oil resistance, and fuel oil resistance among synthetic rubber materials. * Weak against steam, ketones, esters, alkalis, and amines
    Type  For fixing P type / for exercise 
    Rating:
    93%
    from S$1.19
    Min. 2 days
  9. O-Ring G (for Static) NBR
    MASUOKA O-Ring G (for Static) NBR
    Good oil resistance, wear resistance, and aging resistance. Oil resistant products such as oil seals, gaskets, oil resistant hoses, conveyor belts, printing rolls, and spinning top rolls.
    Heat Resistance Temperature (℃)  100  Withstand Pressure (MPa)  Hardness  70  Material  NBR (Nitrile Rubber) 
    Rating:
    95%
    from S$0.36
    Min. 2 days
  10. O-Ring Fluoro AS568 Type
    NOK O-Ring Fluoro AS568 Type
    Rating:
    98%
    from S$0.80
    Min. 2 days
  11. O-Ring S Series (For Static) Fluorine
    NOK O-Ring S Series (For Static) Fluorine
    It has the best heat resistance, oil resistance, and fuel oil resistance among synthetic rubber materials.
    Operating Temperature Range (℃)  -15~200 (MAX220)  Hardness (Durometer A)  70(±5)  Color  Black  Material symbol  F201  Type  For fixing S type  JASO standard  JASO F404 4 type D  JIS Standard  JIS B 2401 Class 4 D  Material  JIS4 class D fluoro rubber 
    Rating:
    92%
    from S$2.19
    Min. 2 days
  12. O-Ring G (For Static) Fluoro Rubber
    MASUOKA O-Ring G (For Static) Fluoro Rubber
    Has heat resistance and chemical resistance. Packing that requires heat resistance, oil resistance, and chemical resistance, corrosion resistant packing in chemical factories, gaskets, diaphragms, tank linings, hoses, pump parts, etc.
    Heat Resistance Temperature (℃)  200  Withstand Pressure (MPa)  Hardness  70  Material  Fluororubber 
    Rating:
    93%
    from S$1.49
    Min. 2 days
  13. O-Ring P Series Red Silicon
    NOK O-Ring P Series Red Silicon
    In addition to heat resistance and cold resistance, it has excellent lubrication oil resistance and water resistance.
    Operating Temperature Range (℃)  -48~200(MAX220)  Hardness (Durometer A)  70(±5)  Type  For fixing P type / for exercise  Color  Red  Material symbol  S503  Material  VMQ-70 (4 types C) silicone rubber 
    Rating:
    90%
    from S$0.47
    Min. 2 days
  14. O-Ring S (For Static) Type 4 D Fluoro Rubber
    MASUOKA O-Ring S (For Static) Type 4 D Fluoro Rubber
    It has the highest heat resistance and chemical resistance. Packing that requires heat resistance, oil resistance, and chemical resistance, corrosion resistant packing in chemical factories, gaskets, diaphragms, tank linings, hoses, pump parts, etc.
    Heat Resistance Temperature (℃)  220  Pressure Resistance (kg/cm2 Hardness  70  Material  Fluoro rubber  Type  For fixing S type  Specification  Heat, oil and chemical resistant 
    Rating:
    93%
    from S$0.60
    Min. 2 days
  15. O-ring P (for exercise) NBR
    Osaka Spirit O-ring P (for exercise) NBR
    Heat Resistance Temperature (℃)  120  Withstand Pressure (MPa)  Hardness  70±5  Type  For dynamic (P type)  Material  NBR (Nitrile Rubber) 
    Rating:
    92%
    from S$10.99
    Min. 2 days
  16. O-Ring G Series (For Static) Fluorine
    NOK O-Ring G Series (For Static) Fluorine
    It has the best heat resistance, oil resistance, and fuel oil resistance among synthetic rubber materials.
    Operating Temperature Range (℃)  -15~200 (MAX220)  Hardness (Durometer A)  70(±5)  Color  Black  Material symbol  F201  Material  FKM-70 (4 types D) fluoro rubber  Type  For fixing G type  JASO standard  JASO F404 4 type D  JIS Standard  JIS B 2401 Class 4 D 
    Rating:
    93%
    from S$3.59
    Min. 2 days
  17. O-Ring AS568 Type
    NOK O-Ring AS568 Type
    Rating:
    91%
    from S$0.34
    Min. 2 days
  18. O-Ring S Series Static (NBR)
    Musashi Oil Seal Mfg O-Ring S Series Static (NBR)
    Although the structure is simple, it has a good sealing performance due to its self-sealing action. Demonstrates stable sealing performance even at high pressure. The installation space is compact and easy to install. Since the seal has no directionality, it is possible to seal from both sides.
    Material  JIS Class 1 A NBR (Nitrile rubber)  Hardness  70(±5)  Heat Resistance Temperature (℃)  100  Type  For fixing S type 
    Rating:
    94%
    from S$0.31
    Min. 2 days
  19. O-Ring 1A
    NOK O-Ring 1A
    It is widely used as a sealing material for various items, and has the best balance of performance and workability.
    Rating:
    94%
    from S$0.31
    Min. 2 days
  20. O-Ring P (For Dynamic) 4 Types C Silicone Rubber
    MASUOKA O-Ring P (For Dynamic) 4 Types C Silicone Rubber
    It has a high degree of heat resistance and cold resistance. Good oil resistance. Heat and cold resistant applications such as packings, gaskets, oil seals, industrial rolls, anti-vibration rubber, and electrical insulation, medical applications, etc. Sealand, Botting (RTV)
    Heat Resistance Temperature (℃)  200  Hardness (Durometer A)  70(±5)  Type  For dynamic (P type)  Material  Silicone rubber 
    Rating:
    94%
    from S$0.26
    Min. 2 days
  21. O-Ring 1BP
    NOK O-Ring 1BP
    Class 1 B has almost the same properties as A305 (Class 1 A), has higher hardness than A305, and has excellent pressure resistance. It is widely used as a sealing material for various items, and has the best balance of performance and workability.
    Operating Temperature Range (℃)  -23~100(MAX120)  Hardness (Durometer A)  90±5  Material symbol  A105  Type  For fixing P type / for exercise  Material  NBR-90 (Type 1 B) NBR nitrile rubber 
    Rating:
    94%
    from S$0.26
    Min. 2 days
  22. O-Ring S (for Static) NBR
    MASUOKA O-Ring S (for Static) NBR
    Good oil resistance, wear resistance, and aging resistance. Oil resistant products such as oil seals, gaskets, oil resistant hoses, conveyor belts, printing rolls, and spinning top rolls.
    Heat Resistance Temperature (℃)  120  Withstand Pressure (MPa)  Hardness  70±5  Type  For fixing S type  Material  NBR (Nitrile Rubber)  Specification  Oil, wear and aging resistance 
    Rating:
    95%
    from S$0.29
    Min. 2 days
  23. O-Ring Fluorine 4D
    NOK O-Ring Fluorine 4D
    It has the best heat resistance, oil resistance, and fuel oil resistance among synthetic rubber materials.
    Operating Temperature Range (℃)  -15~200(MAX220)  Wire Diameter Φ(mm)  1.0±0.07  Inner diameter do (Φmm)  11.5(±0.20)  Outer Diameter (Φmm)  13.5  Hardness (Durometer A)  70±5  Part No.  CO8850G0  Material symbol  F201  Material  FKM (Fluoro rubber)  Type  For SS type fixing 
    Rating:
    99%
    from S$1.69
    Min. 2 days
  24. O-Ring JIS B 2401 P Series (For Dynamic, Static) NBR
    Akitsu O-Ring JIS B 2401 P Series (For Dynamic, Static) NBR
    A synthetic rubber O-ring made for the purpose of sealing a wide variety of fluids such as air and gas as well as oil and water liquids, and exerts a sealing function by utilizing the stress generated by appropriate compression. .. Seals for general industrial equipment.
    Operating Temperature Range  0~80℃  Type  For fixing P type / for exercise  Standard  JIS B 2401  Material  JIS class A NBR (nitrile rubber)  Specification  Oil and water resistant 
    Rating:
    86%
    from S$3.79
    Min. 2 days
  25. O-Ring G Series Red Silicon
    NOK O-Ring G Series Red Silicon
    In addition to heat resistance and cold resistance, it has excellent lubrication oil resistance and water resistance.
    Hardness (Durometer A)  70(±5)  Color  Red  Type  For fixing G type  Material symbol  S503  Material  VMQ-70 (JIS class 4 C) silicone rubber  JIS Standard  JIS B 2401 4 class C  Operating Temperature Range (℃)  -48~200(MAX220) 
    Rating:
    84%
    from S$1.09
    Min. 2 days
  26. O-ring P Series Exercise (NBR)
    Musashi Oil Seal Mfg O-ring P Series Exercise (NBR)
    Although the structure is simple, it has a good sealing performance due to its self-sealing action. Demonstrates stable sealing performance even at high pressure. The installation space is compact and easy to install. Since the seal has no directionality, it is possible to seal from both sides.
    Heat Resistance Temperature (℃)  100  Hardness  70(±5)  Type  For dynamic (P type)  Material  JIS Class 1 A NBR (Nitrile rubber) 
    Rating:
    91%
    from S$0.29
    Min. 2 days
  27. O-Ring G Series (for Static) Class 1 B NBR
    NOK O-Ring G Series (for Static) Class 1 B NBR
    It is widely used as a sealing material for various items, and has the best balance of performance and workability.
    Type  For fixing G type 
    Rating:
    98%
    from S$0.42
    Min. 2 days
  28. O-ring S number (50 ° silicone rubber)
    Morisei Kako O-ring S number (50 ° silicone rubber)
    Material  50 ° silicon 
    Rating:
    60%
    from S$0.91
    Min. 2 days
  29. Silicone O-Ring
    AS ONE Silicone O-Ring
    Operating Temperature Range (℃)  -60~+250  Material  Silicon rubber 
    Rating:
    94%
    from S$2.59
    Min. 2 days
  30. O-ring P series for exercise (red silicon)
    Musashi Oil Seal Mfg O-ring P series for exercise (red silicon)
    Although the structure is simple, it has a good sealing performance due to its self-sealing action. Demonstrates stable sealing performance even at high pressure. The installation space is compact and easy to install. Since the seal has no directionality, it is possible to seal from both sides.
    Heat Resistance Temperature (℃)  200  Hardness  70(±5)  Type  For dynamic (P type)  Material  JIS Class 4 C (silicon rubber) 
    Rating:
    88%
    from S$0.28
    Min. 2 days
  31. O-ring P series (for exercise, for fixing) NBR
    ESCO O-ring P series (for exercise, for fixing) NBR
    Oil resistant
    Specification  Oil resistant  Heat Resistance Temperature (℃)  150  Material  Nitrile rubber (Type 1)  Type  For fixing P type / for exercise 
    Rating:
    90%
    from S$1.39
    Min. 2 days
  32. O-Ring V (For Vacuum Flange) Fluoro Rubber
    MASUOKA O-Ring V (For Vacuum Flange) Fluoro Rubber
    Has heat resistance and chemical resistance. Packing that requires heat resistance, oil resistance, and chemical resistance, corrosion resistant packing in chemical factories, gaskets, diaphragms, tank linings, hoses, pump parts, etc.
    Heat Resistance Temperature (℃)  200  Withstand Pressure (MPa)  Hardness  70  Material  Fluororubber  Type  For V type vacuum flange  Specification  Heat and chemical resistant 
    Rating:
    84%
    from S$2.29
    Min. 2 days
  33. O-Ring Iron Rubber P Series (For Static, For Dynamic)
    NOK O-Ring Iron Rubber P Series (For Static, For Dynamic)
    Iron rubber is an elastic molding material that fills the intermediate area between rubber and plastic. It has excellent elasticity recovery, impact resilience, rubber elasticity from high temperature to low temperature, wear resistance, and mechanical strength.
    Material symbol  U801  Type  For fixing P type, for exercise  Operating Temperature Range (℃)  -35~80(MAX100)  Hardness (Durometer A)  93±5  Material  AU (urethane rubber) 
    Rating:
    98%
    from S$1.49
    Min. 2 days
  34. O-ring JIS B 2401 G series fixing (NBR)
    Morisei Kako O-ring JIS B 2401 G series fixing (NBR)
    It is a material that has excellent oil resistance and wear resistance, and has stable heat resistance. Seals in all industries such as automobiles and hydraulic / pneumatic pressure.
    Operating Temperature Range  -30~100℃  Hardness  70(±5)°  Type  For fixing G type  Standard  JIS B 2401  Material  JIS class A NBR (nitrile rubber) 
    Rating:
    92%
    from S$1.29
    Min. 2 days
  35. O-ring
    Morisei Kako O-ring
    It has the best oil resistance and heat resistance and can be used in a wide range. (Weak against steam, ketones, esters, alkalis and amines) Seals in all industries such as automobiles and hydraulic / pneumatic pressure.
    Operating Temperature Range  -15~200℃  Material  Fluororubber  Standard  JIS B 2401  Specification  Oil and heat resistant 
    Rating:
    93%
    from S$6.99
    Min. 2 days
  36. Mini Y packing NBR
    MASUOKA Mini Y packing NBR
    Packing seals for lots, pistons, and cylinder packing for hydraulic and pneumatic pressure. It is a hook type and fits into the O-ring ground dimensions, does not require accuracy, and does not leak. Packing with extremely low starting, friction and resistance.
    Material  NBR 
    Rating:
    93%
    from S$0.39
    Min. 2 days
  37. O-Ring V (For Vacuum Flange) NBR
    MASUOKA O-Ring V (For Vacuum Flange) NBR
    Good oil resistance, wear resistance, and aging resistance. Oil resistant products such as oil seals, gaskets, oil resistant hoses, conveyor belts, printing rolls, and spinning top rolls.
    Heat Resistance Temperature (℃)  100  Withstand Pressure (MPa)  Hardness  70  Material  NBR (Nitrile Rubber) 
    Rating:
    97%
    from S$0.42
    Min. 2 days
  38. O-Ring P Series Static, Dynamic (Fluorine)
    Musashi Oil Seal Mfg O-Ring P Series Static, Dynamic (Fluorine)
    Although the structure is simple, it has a good sealing performance due to its self-sealing action. Demonstrates stable sealing performance even at high pressure. The installation space is compact and easy to install. Since the seal has no directionality, it is possible to seal from both sides.
    Hardness  70(±5)  Heat Resistance Temperature (℃)  200  Material  JIS Class 4 D (Fuso Rubber)  Type  For fixing P type / for exercise 
    Rating:
    94%
    from S$0.33
    Min. 2 days
  39. O-Ring P Standard (FKM)
    Morisei Kako O-Ring P Standard (FKM)
    It has the best oil resistance and heat resistance and can be used in a wide range (weak against steam, ketones, esters, alkalis and amines). The wire diameter is thick and suitable for exercise. Sealing material in all industries such as automobiles and hydraulic / pneumatic pressure.
    Operating Temperature Range  -15~220℃  Standard  JIS B 2401  Material  JIS4 class D Fluoro rubber (FKM)  Specification  Oil and heat resistant  Type  P standard 
    Rating:
    100%
    from S$2.49
    Min. 2 days
  40. O-ring JIS OR type
    NOK O-ring JIS OR type
    Type  OR 
    Rating:
    80%
    from S$0.21
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 337

Set Ascending Direction