All Category

Clamp Positioning Parts

View : Grid List
Filter

Items 1 - 40 of 169

Set Ascending Direction
  1. Dowel Pin Type A
    Ohkita Dowel Pin Type A
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  +0.005~+0.010  Hardness  HRC58~62  Material  SCM445 
    Rating:
    96%
    from S$0.19
    Min. 2 days
  2. Back shot pin BSP
    CHAMPION CORPORATION Back shot pin BSP
    Dimension J (mm)  10  Dimension H (mm)  120  Hardness  58~60HRC  Material  SCM415 
    from S$77.99
    Min. 5 days
  3. Dowel pin type C
    Ohkita Dowel pin type C
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0~-0.005  Hardness  HRC58~62  Material  SCM445 
    Rating:
    100%
    from S$0.21
    Min. 2 days
  4. Super Shaft (Tolerance h7)
    KSSC Super Shaft (Tolerance h7)
    This standard is a standardized product with reference to JIS B 1354 parallel pins.
    Material  SUS304 
    Rating:
    90%
    from S$22.99
    Min. 2 days
  5. Dowel Pin E Type with Internal Thread (with Straight Groove)
    Ohkita Dowel Pin E Type with Internal Thread (with Straight Groove)
    Uses chromoly steel with excellent toughness. It has an internal screw for pulling out and a straight groove for bleeding air. Mainly used for positioning molds, jigs, etc.
    Hardness  HRC58~62  Material  SCM445  Tolerance  m5 
    Rating:
    100%
    from S$1.09
    Min. 2 days
  6. Knock outer (without knock pin)
    Ohkita Knock outer (without knock pin)
    A tool for pulling out dowel pins, parallel pins, taper pins, etc. with internal threads. It's powerful. By replacing the holder cap at the tip and the hexagon socket head cap screw, it is possible to handle screw diameters from M4 to M10. The workability is good, and the key points are harde... Read More
    Surface Treatment  Black dyed  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC38~42  Material  S45C 
    Rating:
    72%
    from S$249.90
    Min. 2 days
  7. Dowel Pin Type B
    Ohkita Dowel Pin Type B
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0~+0.005  Hardness  HRC58~62  Material  SCM445 
    Rating:
    100%
    from S$0.21
    Min. 2 days
  8. Super shaft (tolerance m6)
    KSSC Super shaft (tolerance m6)
    This standard is a standardized product with reference to JIS B 1354 parallel pins.
    Material  SUS304 
    Rating:
    100%
    from S$22.99
    Min. 13 days
  9. Dowel pin with internal thread (TPMDP) (iron / fabric)
    Osaka Spirit Dowel pin with internal thread (TPMDP) (iron / fabric)
    Material  Iron  Surface Treatment  Phosphate 
    from S$4.89
    Min. 2 days
  10. Dowel pin A type (iron / fabric) (packed product)
    Osaka Spirit Dowel pin A type (iron / fabric) (packed product)
    Surface Treatment  Phosphate 
    from S$6.49
    Min. 3 days
  11. Stopper block straight type (drilled hole)
    No Brand Stopper block straight type (drilled hole)
    Type  Straight  Hole type  Drill hole  Material  S45C 
    from S$11.99
    Min. 2 days
  12. Dowel Pin C Type with Internal Thread (with Spiral Groove)
    Ohkita Dowel Pin C Type with Internal Thread (with Spiral Groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0~-0.005  Hardness  HRC58~62  Material  SCM445 
    from S$1.39
    Min. 5 days
  13. SDP-09-N Digital position indicator
    IMAO SDP-09-N Digital position indicator
    It is a counter window with a magnifying glass. SKP-09 can be used to prevent shaft rotation due to machine vibration. Shaft hole diameter Φ20mm (Φ12, 14, 15 and 16 are possible by using a shaft sleeve) Made of polyamide and lightweight. Character height 7mm At startup, set it to 1/3 or less of t... Read More
    Shaft Diameter (Φmm)  20  Character Height (mm)  Color (housing)  Orange 
    from S$129.90
    Min. 2 days
  14. Dowel pin A type with internal thread (with spiral groove)
    Ohkita Dowel pin A type with internal thread (with spiral groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. It has an internal screw for pulling out and a spiral groove for air bleeding. Mainly used for positioning molds, jigs, etc.
    Tolerance  +0.005~+0.010  Hardness  HRC58~62  Material  SCM445 
    Rating:
    100%
    from S$1.29
    Min. 5 days
  15. Dowel pin B type with internal thread (with spiral groove)
    Ohkita Dowel pin B type with internal thread (with spiral groove)
    Chromoly steel with excellent toughness is used, and the tolerance width is unified to 5 μm. Mainly used for positioning molds and jigs. * Use a dowel pin with an internal screw for the blind hole.
    Tolerance  0~+0.005  Hardness  HRC58~62  Material  SCM445 
    Rating:
    100%
    from S$1.39
    Min. 4 days
  16. DR / DL / DC dial indicator
    IMAO DR / DL / DC dial indicator
    The two-needle dial indicator can accurately read the number of revolutions. When it is rotated once, the long hand makes one rotation and the short hand advances by one scale. (Reverse rotation returns the scale) Dedicated handle wheels and knobs are available for easy installation. The operatin... Read More
    Dimension B (mm)  25 
    from S$64.99
    Min. 2 days
  17. SDP-04 Digital position indicator
    IMAO SDP-04 Digital position indicator
    Lightweight and compact. Shaft hole diameter Φ14mm (Φ6, 8, 10 and 12 are possible by using a shaft sleeve) It is a counter window with a magnifying glass. Character height 6mm At startup, set it to 1/3 or less of the allowable rotation speed. Please avoid the use of sudden acceleration and sudden... Read More
    Mass (g)  50  Color (housing)  Orange 
    from S$129.90
    Min. 2 days
  18. Shaft sleeve SS, SS-S
    KONISHI MFG (MIYOSHI) Shaft sleeve SS, SS-S
    Surface Treatment  Black oxide black  Material  Steel SUM22 
    from S$8.79
    Min. 2 days
  19. Shaft Tolerance h7 B Type
    Accurate Shaft Tolerance h7 B Type
    Jig positioning pins, etc.
    Surface Roughness (S)  1 or less  Hardness (Hv)  300 or more  Material  SUS304(JIS G 4303) 
    from S$24.99
    Min. 6 days
  20. Runner lock pin RLPC
    CHAMPION CORPORATION Runner lock pin RLPC
    Hardness  Induction hardening, 58-60HRC  Material  SK3 
    Rating:
    40%
    from S$7.19
    Min. 2 days
  21. Digital position indicator (4-digit display, orange)
    NeoStar Digital position indicator (4-digit display, orange)
    It is a position measurement product that displays the moving distance of the workpiece from the number of rotations of the lead screw with a counter number. This product is ideal for locations where position adjustment is required for machine tools (cutting, packaging, packing machines, etc.). T... Read More
    Dimension (mm)  33×47×31  Digit Number of Display  4(0000~9999)  Mass (g)  44  Color  Orange  Material (Main Unit)  PA6 (6 nylon) 
    Rating:
    40%
    from S$79.99
    Min. 5 days
  22. SPM stop pin
    NBK (Nabeya Bi-tech Kaisha) SPM stop pin
    from S$6.89
    Min. 2 days
  23. Digital position indicator (5-digit display, orange)
    NeoStar Digital position indicator (5-digit display, orange)
    It is a position measurement product that displays the moving distance of the workpiece from the number of rotations of the lead screw with a counter number. This product is ideal for locations where position adjustment is required for machine tools (cutting, packaging, packing machines, etc.). T... Read More
    Dimension (mm)  33×47×31  Mass (g)  44  Digit Number of Display  5(00000~99999)  Color  Orange  Material (Main Unit)  PA6 (6 nylon) 
    from S$79.99
    Min. 4 days
  24. Dial indicator MD
    KONISHI MFG (MIYOSHI) Dial indicator MD
    Dimension h1 (mm)  18  Dimension H  25  Allowable Rotation Speed (min -1 [rpm])  300  Operating Temperature (℃)  max60 min-20 
    from S$66.99
    Min. 5 days
  25. RDP digital position indicator
    NBK (Nabeya Bi-tech Kaisha) RDP digital position indicator
    Mass (g)  125 
    from S$149.90
    Min. 12 days
  26. Stopper block straight type (counterbore hole)
    No Brand Stopper block straight type (counterbore hole)
    Type  Straight  Material  S45C  Hole type  Prickly hole 
    Rating:
    100%
    from S$11.99
    Min. 11 days
  27. SDP-10 Digital Position Indicator
    IMAO SDP-10 Digital Position Indicator
    Shaft hole diameter Φ30mm (Φ18, 20, 22, 25 are possible by using shaft sleeve) Made of polyamide and lightweight. Character height 6mm At startup, set it to 1/3 or less of the allowable rotation speed. Please avoid the use of sudden acceleration and sudden stop. If the shaft moves in the thrust (... Read More
    Mass (g)  100  Shaft Diameter (Φmm)  30  Color (housing)  Orange  Material (Housing)  Polyamide (6 nylon)  Included Accessories  Rubber cushion …… 1 piece 
    from S$279.90
    Min. 2 days
  28. Shaft tolerance m6 A type
    Accurate Shaft tolerance m6 A type
    Jig positioning pins, etc.
    Surface Roughness (S)  1 or less  Hardness (Hv)  300 or more  Material  SUS304(JIS G 4303) 
    from S$24.99
    Min. 6 days
  29. RDS digital position indicator
    NBK (Nabeya Bi-tech Kaisha) RDS digital position indicator
    Mass (g)  45 
    from S$149.90
    Min. 2 days
  30. Runner lock pin RLPN
    CHAMPION CORPORATION Runner lock pin RLPN
    Hardness  Induction hardening, 58-60HRC  Material  SK3 
    from S$7.19
    Min. 5 days
  31. SDP-02 Digital position indicator
    IMAO SDP-02 Digital position indicator
    Lightweight and ultra-compact. Shaft hole diameter Φ10mm Character height 4mm At startup, set it to 1/3 or less of the allowable rotation speed. Please avoid the use of sudden acceleration and sudden stop. If the shaft moves in the thrust (axis) direction, it cannot be used. It is a RoHS directiv... Read More
    Mass (g)  20  Reading direction  Horizontal  Color (housing)  Orange 
    from S$149.90
    Min. 2 days
  32. RDT digital position indicator
    NBK (Nabeya Bi-tech Kaisha) RDT digital position indicator
    from S$139.90
    Min. 12 days
  33. Stopper block with tap (with tap)
    No Brand Stopper block with tap (with tap)
    Hole type  With tap  Type  With tap  Material  S45C 
    Rating:
    100%
    from S$14.99
    Min. 9 days
  34. M6x30mm [With urethane] Stopper bolt
    ESCO M6x30mm [With urethane] Stopper bolt
    Urethane pads are adhered to applications such as work positioning and stoppers to absorb impact.
    Size (mm)  M6×30  Dimension H (mm)  Dimension h (mm)  Dimension T (mm)  3.6  Dimension B (mm)  10  Dimension L1 (mm)  Dimension C (mm)  About 11.5  Esco Part No.  EA948E-7  Dimension t (mm)  Mass (g)  10  Dimension D (mm) 
    from S$12.99
    Min. 4 days
  35. Set base (seribolt type) PB
    Iwata Mfg. Set base (seribolt type) PB
    It can be used for positioning motor bases and jigs, and adjusting belt tension. A type that is positioned by pushing with an adjustment bolt.
    from S$13.99
    Min. 4 days
  36. M5x30mm [With urethane] Stopper bolt
    ESCO M5x30mm [With urethane] Stopper bolt
    Urethane pads are adhered to applications such as work positioning and stoppers to absorb impact.
    Dimension H (mm)  3.5  Size (mm)  M5×30  Dimension T (mm)  3.2  Dimension C (mm)  About 9.2  Dimension t (mm)  1.5  Dimension h (mm)  1.5  Mass (g)  Dimension L1 (mm)  Dimension D (mm)  Esco Part No.  EA948E-6  Dimension B (mm) 
    from S$12.99
    Min. 4 days
  37. M8x50mm [With urethane] Stopper bolt
    ESCO M8x50mm [With urethane] Stopper bolt
    Urethane pads are adhered to applications such as work positioning and stoppers to absorb impact.
    Dimension D (mm)  10  Mass (g)  20  Dimension L1 (mm)  Esco Part No.  EA948E-12  Dimension C (mm)  About 15  Dimension h (mm)  Dimension t (mm)  Dimension T (mm)  Dimension H (mm)  5.5  Dimension B (mm)  13  Size (mm)  M8×50 
    from S$13.99
    Min. 4 days
  38. Digital position indicator (vertical right rotation) SDP04
    KONISHI MFG (MIYOSHI) Digital position indicator (vertical right rotation) SDP04
    Hole diameters of 6, 8, 10, and 12 are possible by using shaft sleep. * At startup, set it to 1/3 or less of the allowable rotation speed. Avoid sudden acceleration and sudden stop.
    Mass (g)  50  Material (Case)  Orange nylon resin  Direction of Rotation  Right  Operating Temperature (℃)  max.+80 
    from S$149.90
    Min. 5 days
  39. Digital position indicator (standard counterclockwise rotation) SDP09-N
    KONISHI MFG (MIYOSHI) Digital position indicator (standard counterclockwise rotation) SDP09-N
    Hole diameters of 12, 14, 15, and 16 are possible by using shaft sleep. * At startup, set it to 1/3 or less of the allowable rotation speed. Avoid sudden acceleration and sudden stop.
    Mass (g)  90  Direction of Rotation  Left  Series  Material (Case)  Orange nylon resin  Operating Temperature (℃)  max.+80 
    from S$139.90
    Min. 5 days
  40. Digital position indicator (vertical left rotation) SDP09-N
    KONISHI MFG (MIYOSHI) Digital position indicator (vertical left rotation) SDP09-N
    Hole diameters of 12, 14, 15, and 16 are possible by using shaft sleep. * At startup, set it to 1/3 or less of the allowable rotation speed. Avoid sudden acceleration and sudden stop.
    Mass (g)  90  Direction of Rotation  Left  Series  Material (Case)  Orange nylon resin  Operating Temperature (℃)  max.+80 
    from S$139.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 169

Set Ascending Direction