All Category

Screw Supports

View : Grid List
Filter

Items 1 - 40 of 79

Set Ascending Direction
  1. Screw Jack
    NABEYA Screw Jack
    Clamp support Jack attachments can be used.
    RoHS directive (corresponding to 10 substances)  Surface Treatment  Black dyed  Heat Treatment  Quenching  Material  S45C 
    Rating:
    83%
    from S$38.99
    Min. 2 days
  2. Screw support
    MonotaRO Screw support
    For positioning jigs during mold processing. * Please refrain from using it for any other purpose.
    Surface Treatment  Homo processing  Material  S45C  Heat Treatment  None 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  3. SCREW SUPPORT (Plain Type)
    SUPER TOOL SCREW SUPPORT (Plain Type)
    When the steel ball is set on the cradle, a contact surface with low friction is obtained, and adjustment is smooth with a light force.
    Finish  Black dyed  Heat Treatment  Hardened HRC 35-47  Material  S45C 
    Rating:
    93%
    from S$58.99
    Min. 2 days
  4. Screw Jack For Press
    SUPER TOOL Screw Jack For Press
    For press machines, the diameter of the upper surface of the head is large. For adjusting the height of the clamp.
    Rating:
    95%
    from S$53.99
    Min. 2 days
  5. Clamp support screw jack
    NABEYA Clamp support screw jack
    Clamp support screw jacks are useful for supporting various clamps. If one screw does not work well or the height is not high, you can stack two or three screws. (Same size only) The attachment is also convenient for supporting irregular shapes.
    Heat Treatment  (Screw) Quenched HRC35 ± 5  RoHS directive (corresponding to 10 substances)  Surface Treatment  Black dyed  Material  S45C 
    Rating:
    80%
    from S$49.99
    Min. 2 days
  6. Screw support (center type jack)
    SUPER TOOL Screw support (center type jack)
    Especially convenient for centering work of workpieces that are uneven like a casting surface.
    Finish  Black dyed  Heat Treatment  Hardened HRC 35-47  Material  S45C 
    Rating:
    80%
    from S$56.99
    Min. 2 days
  7. Screw support
    NEW STRONG Screw support
    It is a support for the clamp. Convenient for height adjustment. Clamp support. Adjusting the height of the work piece. * Make sure that the clamp is not tilted up / down or left / right. Note that parallelism is difficult to obtain if chips are pinched when setting.
    from S$109.90
    Min. 2 days
  8. Aluminum screw jack
    NABEYA Aluminum screw jack
    Since it is made of aluminum, it will not damage the base, clamps, etc. Convenient as a support jack for plastic clamp sets.
    RoHS directive (corresponding to 10 substances)  Dimension D (mm)  20  Dimension B (mm)  32  Dimension A (mm)  32  Material  A5056  Dimension G (mm)  M12×1.75  Dimension H (mm)  M16×2 
    from S$53.99
    Min. 4 days
  9. Screw support long stroke type
    SUPER TOOL Screw support long stroke type
    The work is firmly supported with a three-stage configuration consisting of the main body, intermediate male screw, and upper male screw that receives the load. Easy to grasp and turn. Do not damage the work. Long stroke. Hard to loosen with lock screws. Easy operation with positioning, fine adju... Read More
    from S$149.90
    Min. 2 days
  10. Screw support (screw type)
    SUPER TOOL Screw support (screw type)
    Ideal for use with the Uniclamp body (FGB / FPB-B). The swivel nut has a spherical bag shape and can be tilted up to 6 ° back and forth and left and right.
    Material  S45C 
    from S$35.99
    Min. 2 days
  11. Screw support
    SUPER TOOL Screw support
    Supports various clamps. * Please use the support tip (sold separately) to support uneven surfaces and irregular shapes. * When using the support in a stackable manner, be sure to use the connection bracket (sold separately).
    Tempered Hardness  35~47HRC  Surface Treatment  Black dyed  Material  S45C 
    from S$99.90
    Min. 2 days
  12. Screw support tip
    NEW STRONG Screw support tip
    Can be used for screw supports, large screw supports, and magnesium jacks. To support irregular shapes
    Material  Steel (S45C) black dye finish  Diameter (Φmm)  (Dowel) 11  Length (mm)  (Dowel) 10 
    from S$29.99
    Min. 2 days
  13. Screw support tip
    SUPER TOOL Screw support tip
    A dedicated screw support tip for all types of workpieces. A tip with a ball brander that does not come off easily.
    Leg length (mm)  10  Leg diameter (mm)  Φ11 
    from S$22.99
    Min. 2 days
  14. Magnetic screw support
    SUPER TOOL Magnetic screw support
    Can be used for vertical and horizontal jigs Since the magnetic force is built into the bottom of the main body, chips do not adhere. Use a support tip (sold separately) for uneven surfaces and workpieces with irregular shapes.
    Finish  Black dyed  Heat Treatment  Hardened HRC 35-47  Material  S45C  Type  With magnetic force 
    from S$299.90
    Min. 3 days
  15. Φ37x10mm Screw jack ball pad
    ESCO Φ37x10mm Screw jack ball pad
    EA637EA / EA637EB series jack mounting attachment Spherical receiving pad
    Mass (g)  90  Esco Part No.  EA637EP-1  Material  Hardened steel, polished finish  Dimension (mm)  Φ37×10 
    from S$22.99
    Min. 4 days
  16. 50 -70mm screw jack
    ESCO 50 -70mm screw jack
    EA637EP-1 to -3 pads can be attached.
    Maximum Height (mm)  70  Material  Hardened steel, wear resistant finish  Esco Part No.  EA637EA-70  Minimum Height (mm)  50  Hole Diameter (Φmm)  (Reception surface) 12  Load Capacity (kN)  60  Mass (g)  620  Dimension (Φmm)  (Body) 50, (receiving surface) 50 
    from S$87.99
    Min. 4 days
  17. 70-100mm screw jack
    ESCO 70-100mm screw jack
    EA637EP-1 to -3 pads can be attached.
    Esco Part No.  EA637EA-100  Hole Diameter (Φmm)  (Reception surface) 12  Load Capacity (kN)  60  Mass (g)  900  Maximum Height (mm)  100  Minimum Height (mm)  70  Material  Hardened steel, wear resistant finish  Dimension (Φmm)  (Body) 50, (receiving surface) 50 
    from S$109.90
    Min. 4 days
  18. Magnetic screw support
    SUPER TOOL Magnetic screw support
    Can be used for horizontal and vertical jigs. Since the magnetic force is built into the bottom of the main body, there is no adhesion of chips. Use the support tip for uneven surfaces and workpieces with irregular shapes.
    Load Capacity (kN)  80  Suitable for  (Pin wrench) PW355 
    from S$279.90
    Min. 2 days
  19. Connecting bracket
    NEW STRONG Connecting bracket
    Prevents misalignment when using stacked screw supports. For screw support joints * Check the body diameter of the support and the hole diameter of the metal fittings before using.
    Diameter (Φmm)  (Dowel) 11 × 10  Set Contents  Single item 
    from S$48.99
    Min. 3 days
  20. Atlas screw jack
    NABEYA Atlas screw jack
    RoHS directive (corresponding to 10 substances) 
    from S$279.90
    Min. 4 days
  21. Magnetic screw support long stroke type
    SUPER TOOL Magnetic screw support long stroke type
    The work is firmly supported with a three-stage configuration consisting of the main body, intermediate male screw, and upper male screw that receives the load. The magnetic force that can be used for horizontal and vertical jigs is built into the bottom of the main unit. Hard to loosen with lock... Read More
    from S$379.90
    Min. 2 days
  22. Φ45x15mm Screw jack V pad
    ESCO Φ45x15mm Screw jack V pad
    EA637EA / EA637EB series jack mounting attachment V-groove receiving pad
    Mass (g)  120  Esco Part No.  EA637EP-2  Material  Hardened steel, polished finish  Dimension (mm)  Φ45×15 
    from S$55.99
    Min. 4 days
  23. Leveling screw jack set
    ESCO Leveling screw jack set
    Esco Part No.  EA574YA 
    from S$169.90
    Min. 4 days
  24. Jig liner for MC
    NEW STRONG Jig liner for MC
    Height Accuracy (mm)  ±0.01  Included Accessories  Washer (CFW-16) x 1  Thread Size  M16/M20  Body Diameter (Φmm)  55 
    from S$77.99
    Min. 3 days
  25. Spring mini support
    SUPER TOOL Spring mini support
    Included Accessories  Hexagon wrench 
    from S$129.90
    Min. 3 days
  26. M10x 49mm support screw
    ESCO M10x 49mm support screw
    Dimension K (mm)  10  Dimension LS (mm)  49  Dimension D1 (mm)  49  Mass (g)  96  Compatible clamp  EA637BA-10~24B、EA637BB-10~20  Esco Part No.  EA637BC-12  Material  Hardened steel  Dimension D  M12 
    from S$28.99
    Min. 4 days
  27. M20 / 160mm  Taper clamp with support screw
    ESCO M20 / 160mm Taper clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  160  Dimension H (mm)  21~105  Dimension A (mm)  30  Dimension B (mm)  60  Material  Hardened steel 
    from S$189.90
    Min. 5 days
  28. M12 / 125mm  Crank clamp with support screw
    ESCO M12 / 125mm Crank clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  125  Dimension A (mm)  20  Dimension H (mm)  28~56  Dimension B (mm)  40  Material  Hardened steel 
    from S$99.90
    Min. 5 days
  29. M20 / 200mm  Step clamp with support screw
    ESCO M20 / 200mm Step clamp with support screw
    It is a painted tempered steel
    Dimension H (mm)  16~75  Dimension C (mm)  200  Dimension A (mm)  40  Dimension B (mm)  60  Material  Hardened steel 
    from S$229.90
    Min. 5 days
  30. M10 / 100mm  Step clamp with support screw
    ESCO M10 / 100mm Step clamp with support screw
    It is a painted tempered steel
    from S$96.99
    Min. 5 days
  31. M12 / 125mm  Crank clamp with support screw
    ESCO M12 / 125mm Crank clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  125  Dimension A (mm)  20  Dimension H (mm)  28~58  Dimension B (mm)  40  Material  Hardened steel 
    from S$99.90
    Min. 5 days
  32. Joint support
    SUPER TOOL Joint support
    Screw support for large machines Long stroke type Joint support for FS500LS. Joint support By adding FSJ200, the height is increased by 200mm. Up to 2 levels can be added! Withstand load ・ When one unit is installed: 120kN (total length 500-700mm) For load / 2 units mounting: 100kN (total len... Read More
    Mass (kg)  1.6  Overall Length (mm)  200  Body Diameter (mm)  Φ70 
    from S$329.90
    Min. 5 days
  33. M20 / 160mm  Step clamp with support screw
    ESCO M20 / 160mm Step clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  160  Dimension H (mm)  16~77  Dimension A (mm)  30  Dimension B (mm)  60  Material  Hardened steel 
    from S$199.90
    Min. 5 days
  34. M20 / 160mm  Taper clamp with support screw
    ESCO M20 / 160mm Taper clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  160  Dimension H (mm)  16~65  Dimension A (mm)  30  Dimension B (mm)  60  Material  Hardened steel 
    from S$179.90
    Min. 5 days
  35. M12 / 100mm  Taper clamp with support screw
    ESCO M12 / 100mm Taper clamp with support screw
    It is a painted tempered steel
    Dimension C (mm)  100  Dimension A (mm)  20  Dimension H (mm)  24~92  Dimension B (mm)  40  Material  Hardened steel 
    from S$89.99
    Min. 5 days
  36. Screw support (screw type)
    SUPER TOOL Screw support (screw type)
    Ideal for use with the Uniclamp body (FGB / FPB-B). The swivel nut has a spherical bag shape and can be tilted up to 6 ° back and forth and left and right.
    Mass (g)  80  Suitable Model  FPB10B  Material / Finish  S45C / black dye  Load Capacity (kN)  11  Heat Treatment  Hardening HRC23 ~ 31 
    from S$29.99
    Min. 5 days
  37. M24x137mm support screw
    ESCO M24x137mm support screw
    Dimension LS (mm)  137  Dimension D1 (mm)  137  Dimension K (mm)  20  Mass (g)  820  Compatible clamp  EA637BA-10~24B、EA637BB-10~20  Esco Part No.  EA637BC-24L  Material  Hardened steel  Dimension D  M24 
    from S$109.90
    Min. 4 days
  38. M20x 69mm support screw
    ESCO M20x 69mm support screw
    Dimension K (mm)  16  Mass (g)  320  Dimension D1 (mm)  69  Dimension LS (mm)  69  Compatible clamp  EA637BA-10~24B、EA637BB-10~20  Esco Part No.  EA637BC-20  Material  Hardened steel  Dimension D  M20 
    from S$54.99
    Min. 4 days
  39. M24x 87mm support screw
    ESCO M24x 87mm support screw
    Dimension K (mm)  20  Mass (g)  590  Dimension D1 (mm)  87  Dimension LS (mm)  87  Compatible clamp  EA637BA-10~24B、EA637BB-10~20  Esco Part No.  EA637BC-24  Material  Hardened steel  Dimension D  M24 
    from S$76.99
    Min. 4 days
  40. Screw support for large machines  Long stroke type
    SUPER TOOL Screw support for large machines Long stroke type
    Ideal for supporting workpieces and clamps used in large machines. Since it uses a double-threaded screw and a reverse screw, it can be fast-forwarded by 16 mm (down) per rotation of the intermediate male screw. By using aluminum for the main body, the mass is cut by 25% (compared to the company)... Read More
    Load Capacity (kN)  150  Base Width (mm)  170  Stroke (mm)  300~500  Mass (kg)  5.5  Included Accessories  Hex wrench (3mm, 4mm) 2 pcs  Head Diameter (Φmm)  Top: 60  Body Diameter (mm)  Φ70 
    from S$1,099.00
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 79

Set Ascending Direction