Pressure Washers / Steam Cleaners
A high pressure washer / steam cleaner is a cleaning tool that floats and removes dirt by the effect of high temperature steam. It is suitable for cleaning the outer walls of houses, kitchens, ventilation fans, sashes and bathrooms. Using the power of water, it is very easy to remove dirt. There are high-pressure washing machines that can change the water pressure, portable high-pressure washing machines, cordless steam cleaners, etc., and you can choose the one that suits your location.
Other Related Pages
Zaoh High pressure washer Vittorio Z1A high-pressure washer that is monotone and harmonizes with the surroundings. Lightweight and compact, it is convenient to carry. A vario jet nozzle and a cyclone jet nozzle are included as standard. Uses a soft type high pressure hose that is easy to handle. Cleaning around cars and homes. * Do ... Read MoreMaterial Resin Current (A) 10 Power Consumption (W) 1010 Power Supply Single-phase Regular Pressure (MPa) 6.5 Discharge Water Volume (L / h) [Maximum] 490, [Common use] 300 Maximum Allowable Pressure (MPa) 9- Chubu High-Pressure Hose High pressure washer hose for coupler mounting (3/8 male on both ends)Wire reinforcement Commercial high pressure washer hose. Replacement hose for reusing one-touch couplers and screw-type couplers.Regular Pressure (MPa) 23 Hose Inner Diameter (Φmm) 9.5 Minimum Burst Pressure (MPa) 70 Reinforcing Layer With wire blade Hose Outer Diameter (Φmm) 15.6 Material (Metal Hub) Stainless steel Used hose 3/8 (3 minutes)from S$199.90Min. 5 days
- Annovi Reverberi High pressure washer BLUE CLEAN 117 (cold water type)Power Input (V) Single phase 100 Discharge Pressure (MPa) 10 Discharge Water Volume (L/min) 5.5from S$269.90Min. 2 days
- IRIS OHYAMA Rinser CleanerCarpets and cloth products can be washed completely and are always clean!Power Input (V) AC100(50/60Hz) Power Consumption (W) 330 Tank Capacity (L) Shimizu 0.3 / Recovery 0.5 Suction Work Rate (W) 30 Maximum water temperature (° C) 40
- MonotaRO One-touch joint for water absorption connector (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.
- FLUTECH Ventrance cleaning gunTrigger gun for commercial high pressure washer It is often used for washing trucks and vehicles. Inner side 3/8 size coupler plug standard (removable) * Connected to 3/8 size hoseWithstand Pressure (MPa) 31 Discharge Rate (L/min) 30 Heat Resistance Temperature (℃) 160
- Chubu High-Pressure Hose M22 screw connection couplerThere are two types of M22 screw type coupler connections used in high pressure washers: 1/4 (2 minutes) type and 3/8 (3 minutes) type. O-ring is attached to the brass shaft center * Cannot be connected to a shaft outer diameter of 15 mm such as Ryobi. * The shape may differ slightly depending on... Read MoreOuter Diameter (Φmm) Axis: 14
- IRIS OHYAMA High pressure washer Main body side couplingIt is a coupling on the main body side of the high pressure washer.Material ABS Mass (g) 10
- MonotaRO Discharge extension high pressure hose (parts for high pressure washer MRO-1400)The high pressure hose can be extended by 5m. * Do not use for anything other than its intended purpose.
- Chubu High-Pressure Hose Cleaning gun MV925 with straight lance (SUS304)Straight lance gun for commercial high pressure washers. When working on scaffolding such as in the painting industry, long guns such as short guns and truck car washes are often used. Lance uses stainless steel (SUS304) * The length is not the total length but the lance (nozzle) length.Discharge Rate (L/min) 25 Nozzle 1549-1/4 Spraying Angle 15 Heat Resistance Temperature (℃) 150 Withstand Pressure (MPa) 31from S$299.90Min. 2 days
- TECOMEC Short swivel returned from hose for business useIt connects to the inside of the gun to prevent and release the twist of the hose. It has a total length of only 5 cm and rotates softly. * Gun is sold separately.Material Brass Size 3/8 (3 minutes) male female Withstand Pressure (MPa) 21
- MonotaRO Gun (Parts for High Pressure Washer MRO-1400)* Do not use for anything other than its intended purpose.Type gun
- Uresin Former gun (with automatic dilution dial)The foam gun dial can be used for automatic dilution, and the chemical solution becomes foamy, so the cleaning agent can be sprayed evenly while visually checking. This ensures that there is no difference in cleaning agent results between sprayers. It is possible to select a chemical solution acc... Read MoreMaterial (Bottle) PE, (Cap) PP Acidic / Alkaline alkalinity
- Chubu High-Pressure Hose High pressure washer hose with 3/8 size one-touch couplerWire reinforcement Commercial high pressure washer hose. Compared to conventional products, the outer layer rubber of the hose contains a wear-resistant polymer, which makes it slippery and easier to work with. Both the one-touch coupler and the connection fittings are made of stainless steel and... Read MoreRegular Pressure (MPa) 23 Hose Inner Diameter (Φmm) 9.5 Minimum Burst Pressure (MPa) 70 Reinforcing Layer With wire blade Hose Outer Diameter (Φmm) 15.6
- TECOMEC Trigger gun for high pressure washer MV925 (main unit only)Triger gun used by many washing machine manufacturersWithstand Pressure (MPa) 31 Discharge Rate (L/min) 30 Heat Resistance Temperature (℃) 160from S$149.90Min. 2 days
- IRIS OHYAMA Tank type high pressure washerIt is a tank type that can be used even if there is no water supply (faucet) nearby. With a lid, there is no need to worry about water spilling when moving. Easy to install without tools. The main body can be stored in the tank when not in use. You can use hot water at about 50 ° C. Makes it easi... Read MoreMaterial Polypropylene (excluding some) Power Input (V) AC100(50/60Hz) Power Consumption (W) 1000 Normal Discharge Pressure (MPa) About 6.5 Continuous Operating Time About 1 hour (about 7 minutes per tank) Maximum Allowable Pressure (MPa) About 8.5
- TECOMEC Injection angle adjustment FA nozzle IDROTOJET2The injection angle can be adjusted from direct injection to a fan shape of 60 degrees. Front and rear to adjust high pressure, rotate to adjust angle.Withstand Pressure (MPa) 20.7 Discharge Rate (L/min) 30 Heat Resistance Temperature (℃) 150 Connection Size Rc1/4
- IRIS OHYAMA High pressure washer hose side couplingIt is a coupling on the water hose side.Material ABS、POM Mass (g) 24
- GLORIA Accumulator type foam washer FM10Highly chemical resistant materials are used for tanks, pumps, etc., and viton (fluorine rubber) is used for seals. It has a certain level of durability against acidic and alkaline detergents, and consumables can be replaced. The original structure of the nozzle allows for wide-angle and efficien... Read MoreIncluded Accessories With safety valve Maximum Pressure (bar) 3 Operating pH Range 2～12 Maximum Capacity (L) 1 As ONE Part Number 2-3573-01
- MonotaRO Water absorption connector (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.Suitable for High pressure washing machine MRO-1400 Type Water absorption connector
- MonotaRO Discharge high pressure hose (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.Type Discharge high pressure hose 5m
- Sonic Scrubbers Supersonic scrubber replacement brush set* A dedicated pad head (included with HT-JP and HALG-JP) is required to use the replacement pad.from S$23.99Min. 2 days
- Chubu High-Pressure Hose Commercial wash tube hoseExtra-fine tube wash hose with integrated nozzle A professional tube wash hose that can be connected to a household Karcher K series gun. * Gun is sold separately. * Cannot be connected to washing machines other than Karcher.Suitable Manufacturer Karcher Hose Inner Diameter (Φmm) 3.6 Nozzle Outer Diameter (Φmm) 8 Withstand Pressure (MPa) 15 Hose Outer Diameter (Φmm) 6.1
- PA Super turbo nozzle (with nipple)It is called "Super Turbo Nozzle" by Seiwa Sangyo and "Tornado Nozzle" by Fulltech. MP type (It is easy to use because the rotating nozzle has a built-in spring) The nozzle is 040 size. * Cannot be used with 100V household high pressure washers.Nominal Size 040
- Chubu High-Pressure Hose 3/8 size hose, G1 / 2 threaded type coupling high pressure washer hoseWire reinforcement Commercial high pressure washer hose. Compared to conventional products, the outer layer rubber of the hose contains a wear-resistant polymer, which makes it slippery and easier to work with. The screw type coupler is made of brass and the mounting bracket is made of stainless ... Read MoreRegular Pressure (MPa) 23 Hose Inner Diameter (Φmm) 9.5 Minimum Burst Pressure (MPa) 70 Reinforcing Layer With wire blade Hose Outer Diameter (Φmm) 15.6from S$239.90Min. 2 days
- MonotaRO Turbo lance (parts for high pressure washer MRO-1400)* Do not use for anything other than its intended purpose.Type Turbo lance
- ASADA Hand gun SUS one-touch coupler specificationSuitable for 13/100GS、15/150GS・GSP、16/150G・GP Mounting Screw Size PT1/4from S$429.90Min. 2 days
- KYOWA Portable high pressure washerSince it is a non-lubricated (oilless) pump, it is free from maintenance and inspection. It does not require oil, grease, belts, or belt wheels, and is designed to maximize the friction of the rollers. The torque at startup is extremely low, and the output is enormous. Since it is an all-position... Read MoreType For clean room Power Input (V) Single phase 100 Starting Up Direct insertion Maximum Pressure (MPa) 3.5/3.5 Rotation Speed [50/60Hz] (min -1 [rpm]) 1430/1740
- Chubu High-Pressure Hose Both ends M22 thread inner diameter 14mm nipple (for connection and conversion)This is the M22 nipple that is often used in high pressure washers. Compatible manufacturers: Karcher, Kranzle, 200V washer, * Cannot be connected to Ryobi Iris (partial).Inner Diameter (Φmm) 14
- Chubu High-Pressure Hose G1 / 2 screw connection couplerCorresponding manufacturer Super Industry, Zaoh Industry, Honda Screw Standard 3/8 The brass shaft does not come with an O-ring. The O-ring is attached to the inner surface of the male plug.hose connection 3/8 (3 minutes)from S$23.99Min. 2 days
- MonotaRO Variable nozzle lance (parts for high pressure washing machine MRO-1400)* Do not use for anything other than its intended purpose.Suitable for High pressure washing machine MRO-1400 Type Variable nozzle lance
- Sonic Scrubbers Supersonic scrubber replacement pad set* A dedicated pad head (included with HT-JP and HALG-JP) is required to use the replacement pad.
- TECOMEC Unloader valveHigh pressure washer pressure regulator. Mounting screw 3/8 size, pressure gauge mounting port 1/4 size.Discharge Rate (L/min) 30from S$269.90Min. 2 days
- IRIS OHYAMA High pressure washer high pressure hose 8MA dedicated high-pressure hose that connects the main body of the high-pressure washer and the gun.Suitable Model FBN-401、FBN-604、FIN-901E、FIN-901W
- ESCO 800ml foam spray gun (with plug)The tip of the nozzle rotates 360 degrees, so you can spray bubbles at various angles. Can also be used as a spray nozzle by removing the tank.Specification With plug Mass (g) 307 Capacity (L) About 0.8 (water: 0.35, detergent: 0.45) Connector Thread 3/4 ”NH female Applicable Pressure (MPa) [Water pressure] 0.28-0.63
- BOSCH High-pressure washing machinePowerful cleaning ・ Top level cleaning power. 1. Middle class and TOP class cleaning power: Lightweight and compact, achieving a maximum allowable pressure of 12MPa and a maximum discharge water volume of 390L / h! 2. Folds and compacts, and moves easily with large wheels: Equipped with large wh... Read MorePower Input (V) 100(50/60Hz) Power Consumption (W) 1500 Maximum Allowable Pressure (MPa) 12 Maximum water temperature (° C) 40 Maximum discharge rate (L / h) 390from S$449.90Min. 2 days
- KOSHIN Rotating Nozzle (Cyclone Nozzle) for Koshin Engine Washer JCERotating nozzle nozzle (cyclone nozzle) with high detergency Please check the compatible model carefully. For replacement / repair * Please check the model and size carefully.
- Chubu High-Pressure Hose Quick nozzle by color (Kousin, Marunaka, Maruzen, etc.)It is often used in overseas-produced high-pressure washers. Corresponding manufacturer: Koshin, Marunaka, Maruzen, etc. Size: 035 Red: 0 degrees (straight) Orange: 15 degrees Green: 25 degrees White: 40 degrees Black: 5 pieces for soap 1 set * Nozzle connection coupler is sold separately 2QSF.from S$44.99Min. 2 days
- IRIS OHYAMA High pressure washer parts Diffusion variable lanceThis is a special part for our tank type high pressure washer. Since it can be switched between direct injection and diffused water flow, it can be adjusted according to the dirt.Material Nylon
- Chubu High-Pressure Hose Overseas standard quick couplerCoupler screw standard 1/4 for nozzle tip for overseas production high pressure washer * Not compatible with domestically produced high pressure washers.Thread Standard 1/4from S$19.99Min. 2 days
