There are two types of M22 screw type coupler connections used in high pressure washers: 1/4 (2 minutes) type and 3/8 (3 minutes) type. O-ring is attached to the brass shaft center
* Cannot be connected to a shaft outer diameter of 15 mm such as Ryobi. * The shape may differ slightly depending on... Read More
It connects to the inside of the gun to prevent and release the twist of the hose. It has a total length of only 5 cm and rotates softly.
* Gun is sold separately.
Withstand Pressure (MPa) 21 Size 3/8 (3 minutes) male female Overall Length (mm) 50 Material Brass
This is the M22 nipple that is often used in high pressure washers. Compatible manufacturers: Karcher, Kranzle, 200V washer,
* Cannot be connected to Ryobi Iris (partial).
Corresponding manufacturer Super Industry, Zaoh Industry, Honda Screw Standard 3/8 The brass shaft does not come with an O-ring. The O-ring is attached to the inner surface of the male plug.
Coupler screw standard 1/4 for nozzle tip for overseas production high pressure washer
* Not compatible with domestically produced high pressure washers.
It is used in high pressure washers produced overseas. Koshin, Marunaka, Maruzen, etc. Screw standard 3/8
* Not compatible with domestically produced high pressure washers.
M22 screw type (for Φ15) knurled coupler used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the resin part of the nut. Never use tools, etc.
Maximum Operating Temperature (℃) 150 Dimension M (mm) 22×1.5 Maximum Operating Pressure (MPa) 28 Dimension E (mm) 35.5 Dimension d2 (mm) 6 Dimension d1 (mm) 6 Material (Main Unit) Brass Material (Nut) brass + nylon resin
Conversion knurled coupler between M22 screw type (for Φ14) and M22 screw type (for Φ15) used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the re... Read More
Maximum Operating Temperature (℃) 150 Dimension M (mm) 22×1.5 Maximum Operating Pressure (MPa) 28 Material (Main Unit) Brass
G1/2 screw type (for Φ11) knurled coupler used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the resin part of the nut. Never use tools, etc.
Dimension D (mm) 11 Maximum Operating Temperature (℃) 150 Maximum Operating Pressure (MPa) 28
Converting knurled coupler between M22 screw type (for Φ15) and G1/2 screw type (for Φ11) used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the r... Read More
Dimension G 1/2 Maximum Operating Temperature (℃) 150 Dimension M (mm) 22×1.5 Dimension A (mm) 25 Maximum Operating Pressure (MPa) 28 Dimension E (mm) 35.5 Dimension d1 (mm) 6 Dimension d2 (mm) 6 Material (Main Unit) Brass Material (Nut) brass + nylon resin
For washing with car shampoo Tank capacity: 400mL Usable detergent: Neutral detergent
When you want to use car shampoo
*Please check the model and size carefully. For SJC-3625/3650
Tank Capacity (L) 0.4 Applicable Fluid Neutral detergent Suitable Model SJC-3625/3650
Those who frequently open and close the handle are easy to handle without a lock. Since it is for high pressure, opening and closing the valve is harder than general-purpose products.
* For those who frequently open and close the handle, it is easier to handle without a lock.
Converting knurled coupler between M22 screw type (for Φ14) and G1/2 screw type (for Φ11) used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the r... Read More
Dimension G 1/2 Maximum Operating Temperature (℃) 150 Dimension M (mm) 22×1.5 Maximum Operating Pressure (MPa) 28 Material (Main Unit) Brass
M22 screw type (for Φ14) knurled coupler used in high pressure washers
High pressure washer, water pipe
*This bracket is a hand-tightening type. Be sure to tighten it firmly with just your hands. Tightening with a tool or the like will damage the resin part of the nut. Never use tools, etc.
Maximum Operating Temperature (℃) 150 Dimension M (mm) 22×1.5 Maximum Operating Pressure (MPa) 28 Material (Main Unit) Brass
Stainless steel one-touch coupler used in domestic high pressure washers
With socket disconnection prevention lock pin function
* Not compatible with air. Not compatible with high pressure washers manufactured in China and the United States.
Heat Resistance Temperature (℃) 150 Withstand Pressure (MPa) 75
Suitable for connecting a washing pipe hose with a high pressure washer. It has excellent pressure resistance compared to general-purpose ball valves. It can also be used in hydraulic piping. With lock function
Drainage pipe cleaning, pipe cleaning, pipe cleaning
* The color of the handle may cha... Read More
Chubu High-Pressure Hose M22 screw connection couplerThere are two types of M22 screw type coupler connections used in high pressure washers: 1/4 (2 minutes) type and 3/8 (3 minutes) type. O-ring is attached to the brass shaft center * Cannot be connected to a shaft outer diameter of 15 mm such as Ryobi. * The shape may differ slightly depending on... Read MoreThread Pitch (mm) 1.5 Screw Dimensions (mm) 22 Outer Diameter (Φmm) Axis: 14
