There is a wave blade on the back, so you can cut on both sides. It uses a handle that floats even if it is dropped into the sea.
Knife for cutting rope
Blade length (cm) 13.5 Overall Length (cm) 28 Material (Blade) Stainless steel Material (Handle) Wood / plastic
Since the cut area has knurls (saws), the cutting material does not escape and the sharpness is excellent. Since it uses special stainless steel, it is also suitable for work at sea.
For cutting any rope, for cutting nets, fishing lines, etc.
RoHS directive (corresponding to 10 substances) Correspondence
A special tool for tightening electric wire lashing products on ships.
A bit for an electric screwdriver exclusively for band buckle RB
* Please check the insertion part of the power tool you are using.
Material Chrome molybdenum steel Type For type D Surface Treatment Plating
Makiri made of steel and hardened. Excellent sharpness. With a floating pattern that floats even if dropped into the sea.
Useful for cutting ropes, strings and entwined nets.
Material (Handle) wooden Material (Blade) Made of steel Blade length (cm) 13.5
A special tool for tightening electric wire lashing products on ships.
The tip bends 360 degrees with a lashing screwdriver exclusively for band buckle RB.
Type For type D Color Green Material Handle part PVC Surface Treatment Plating
A heat transfer cutter that cuts ropes and nets such as PP (polypropylene) mainly as a material while melting them with heat.
* Continued use may cause a chemical film to form on the blade and main body connection, resulting in reduced capacity. Periodically remove the blade from the main body an... Read More
Voltage (V) 100 Blade Length (mm) 36 Power Consumption (W) 51 Mass (g) About 1000 Set Contents Main body and special blade 1 piece Specification With high brightness LED pilot lamp Temperature (℃) [Cutter] About 450
It is a storage item exclusively for band hoops.
It can be carried and hung, and can be easily replaced.
* Be careful not to get your fingers caught when setting.
Length (mm) 200 Width (mm) 30 Thickness t (mm) 5 Surface Treatment None Material SUS304
A small heat cutter manufactured by Engel of Germany for cutting fiber ropes and fiber nets. High output and smooth cutting. Since the cut surface is welded by heat, it prevents fraying after cutting. With an on / off switch, it starts up relatively quickly. There is also a convenient V-shaped bl... Read More
Blade Length (mm) 21 Power Consumption (W) 70 Voltage (V) AC100～110 Mass (kg) About 1 RoHS directive (corresponding to 10 substances) Correspondence
By making the tip elongated while maintaining its multi-functions, it is possible to perform more detailed work and approach deep areas. "GM pliers type 3" with stainless steel + titanium coated lightweight reinforced body. Multi-functional head shape that integrates a line cutter and s... Read More
Mass (g) 195 (Pliers Only) Dimension (mm) 196 Material (Main Unit) SUS430 stainless steel/titanium coat Standard Equipments spiral rope with carabiner
"GMUV light" can be installed in various places. Ideal for attaching to large tackle boxes such as Meiho "Bucket Mouth Series" and Ring Star "Dokat Series".
* AA x 1 (sold separately) * Batteries are not included. Please purchase separately. *Please pay attention to ... Read More
Mass (g) 33, GMUV light holder: 19 Wavelength (nm) 400-405 (Ultraviolet/UV-A) Dimension (mm) 90×22 Light Source COB (surface emission) Color (Body) Silver Specification Simple waterproof specification Lighting Time (hours) UV light: about 4, LED light: about 5
"GMUV light" can be installed in various places. Ideal for attaching to large tackle boxes such as Meiho "Bucket Mouth Series" and Ring Star "Dokat Series".
*This product is a light holder only (single unit), please purchase the LED light separately or purchase the U... Read More
A convenient storage holder that allows you to quickly put in and take out the fish grip. The "GM Capture Grip Holder" is a convenient storage holder for the separately sold "GM Capture Grip" & "GM Capture Scissors". Even after catching a fish, you can carry it a... Read More
Dimensions, Width W x Depth D x Height H (mm) 57×51×160 Mass (g) 80 (including carabiner) Material GFRP Suitable for GM capture grip/GM capture scissors Included Accessories original carabiner
Strong luminescence of the phosphorescent lure with short irradiation. "GMUV light" is a UV light that can make phosphorescent treated lures and materials emit strong light in a short period of time. Equipped with a convenient LED light on the side to illuminate dark places. It is a 2-w... Read More
Mass (g) 33 Dimension (mm) 90×20 Structure Simple waterproof specification Material hard aluminum body Included Accessories strap with carabiner
Dedicated to light game fish, easy operation to firmly hold the fish's mouth. The compact grip "GM Grip Mini LT" for light game fish such as small migratory fish and rock fish is easy to operate and firmly holds the mouth of the fish. The body material is lightweight and rust-free r... Read More
Overall Length (mm) 127 Mass (g) 49 Material (Body) GFRP (60% glass fiber content) Material (Catch) SUS316 stainless steel
Multi-compact pliers "GM Pliers Type 3Jr." Multi-functional head shape that integrates a line cutter and split ring opener that can easily cut PE lines, a grip shape that is easy to hold, a carabiner and spiral rope that is convenient to carry, etc. Multi functions required in various f... Read More
Mass (g) 133 (Pliers Only) Dimension (mm) 155 Material (Main Unit) SUS430 stainless steel/titanium coat Standard Equipments spiral rope with carabiner
It is used as a hardware for inserting it into the end of the pipe and fixing it with a lashing product. The wall thickness of the pipe can be up to 3.5 tons.
* Be careful not to get injured as there are sharp points.
Thickness t (mm) 2.3 Length L (mm) 59 Surface Treatment Electroplating Material Iron Type PH-0
Rust-resistant stainless steel rope cutter Wave blade allows you to cut firmly without slipping. It is useful to have one on the ship.
Cutting ropes, styrol, etc.
* The blade is intended for cutting fiber ropes, etc., and may be damaged if used on hard objects such as wood and plastic.
RoHS directive (corresponding to 10 substances) Correspondence Material Handle: wooden
Compact landing shaft with excellent cost performance. The Golden Mean "Slide Spear" is a compact landing shaft with excellent cost performance while sticking to "quality", "strength" and "design". Three size variations of "350", "450" a... Read More
To ensure the landing of hooked prey. Stay & carabiner standard equipment. The Golden Mean "GM Shaft" is a landing shaft with improved mobility and operability to reduce stress during fishing and ensure smooth landing. At the bottom of the shaft body, a grip with an uneven shape is ... Read More
Stainless steel + titanium coated lightweight reinforced metal body. Golden Mean Multi-Fishing Pliers. The GM Pliers Type 3, which uses a lightweight, reinforced body made of stainless steel and titanium, has a multi-functional head shape that integrates a line cutter and split ring opener that c... Read More
Dimension (mm) 170 Mass (g) 183 (Pliers Only) Material (Main Unit) SUS430 stainless steel/titanium coat Standard Equipments spiral rope with carabiner
Semi-hard rubber material holds the pliers firmly. 360° rotating clip allows easy installation in various locations. The "GM Pliers Holder" uses semi-hard TPR rubber as the material, and holds the pliers firmly with just the right amount of hardness and elasticity. A 360° rotation clip ... Read More
Mass (g) 45 Dimensions (Width W x Height H) (mm) 80×160 Material (Main Unit) TPR rubber Material [Back side attachment] PP
It is slimy, so you can firmly grip and tighten soft octopus and squid that are difficult to grasp. "OS Scissors" are soft scissors that can firmly grasp slimy targets such as octopus (OCTOPUS) and squid (SQUID). The special shape of the cutting edge allows you to "grab" the t... Read More
Overall Length (mm) 187 Mass (g) 83 Material Stainless steel
Holds prey safely and speedily. GM capture scissors hold prey safely and speedily without getting your hands dirty in salt water fishing such as light game, egging, and hairtail game. 1 Elongated cutting edge shape: Employs an elongated cutting edge shape that makes it easy to pinch prey. With te... Read More
Mass (g) 140 Overall Length (mm) 247 Material GFRP
Don't miss the hooked fish. Strong support for landing from places that are out of reach. The GM Compact Spear + Ultimate Gaff (M) set is an original landing tool set that embodies compact yet excellent catching performance for killing large fish in shore games. With a standard length of 1m95... Read More
number of joint shafts 10 Mass (g) 300158 original diameter (mm) 31 Cutting Tip Diameter (Φmm) 5 Included Accessories Climbing rope (Φ6mm×3m) Dimensions (cm) [End] 31.5 Diameter (Φmm) [First] 15.0 Overall Length (m) [GM Compact Spear] 1.95
A simple and safe line cutter that can be cut with just a pinch. The GM line cutter can be used not only for "PE" lines, but also for line cutting during fishing with easy operation. Please attach it to various bags and pin-on reels with various color variations.
* Bead chain standard e... Read More
Mass (g) 2.9 (when bead chain is attached) Overall Length (mm) 45
Easy rod support "GM Rod Post SP" that supports fishing scenes. GM Rod Post SP is a simple spinning rod compatible rod post that can be easily attached to fishing vests, waist bags, belts, etc. From "landing" to "wading", using the GM rod post SP during "lure ch... Read More
Overall Length (mm) 190 Inner Diameter (Φmm) 40 Width (mm) 66 (Including Holder Part) Mass (g) About 80 Material Nylon resin with glass fiber
It will be attached by welding to the hull that is used as a base for attaching equipment to the hull.
Bolt tightening equipment can be mounted in 3 places with mounting hole diameters of Φ80 to Φ140. The angle of the three elliptical hole positions is 120 degrees
* Be careful not to get injured ... Read More
Height H (mm) 50 Bolt Hole Diameter (Φmm) 8 × 40 ellipse Surface Treatment Electroplating Thickness t (mm) Flat plate: 2.3 Material Iron Type SKN
A spare blade for the Engel heat cutter. It is available for ropes and nets, so please use it according to your needs. It has a single blade for ropes and a convenient V-shaped blade for fishing nets.
Spare blade for heat cutter (for cutting ropes and fishing nets)
* Please do not use other than ... Read More
RoHS directive (corresponding to 10 substances) Correspondence Suitable Model HSG-0
Don't miss the hooked fish. Big gaff with excellent "strength" and "corrosion resistance". "GM Ultimate Gaff" is a big gaff that uses stainless steel SUS304 material with excellent "strength" and "corrosion resistance". GM's original shaft... Read More
A set of a grip that can hold prey safely and quickly, and a storage holder that is convenient to carry. The GM capture grip + holder set is a variety of grips that can hold prey safely and speedily without getting your hands dirty, fishing vests, waist bags, belts, etc. It is a set of dedicated ... Read More
Mass (g) Capture Grip 107/Exclusive Holder 68 Material GFRP
Compatible with both spinning and bait types. Easy rod support "GM Rod Post DX" that supports fishing scenes. The GM Rod Post DX is a simple rod post that can be easily attached to fishing vests, waist bags, belts, etc., and is compatible with both bait rods and spinning rods. From &quo... Read More
Overall Length (mm) 200 Inner Diameter (Φmm) 35 Width (mm) 65 (Including Belt Attachment) Mass (g) About 105 Material (Main Unit) PBT resin with glass fiber Material [Protective rubber] PVC rubber
Holds prey safely and speedily. The GM capture grip holds prey safely and quickly without getting your hands dirty in salt water fishing such as light game, egging, and hairtail game. 1 Elongated cutting edge shape: Employs an elongated cutting edge shape that makes it easy to pinch prey. With te... Read More
Mass (g) 118.5 (including carabiner) Overall Length (mm) 250 Material GFRP Included Accessories original carabiner
Micro pliers that allow you to work with just your fingertips. GM Micro Pliers are micro pliers compatible with micro split rings (#00-2) that are easy to use and mobile, allowing you to work with just your fingertips. 1 Micro split ring opener: Micro split ring opener for #00-2 split rings. 2 Sp... Read More
Made of stainless steel that is resistant to heat and rust
Spare blade for stationary electric heating rope cutter
* Please refrain from using other than compatible models. * Only replacement blades are available, so connecting bolts and nuts are not included.
Nomura Unity screwdriverA special tool for tightening electric wire lashing products on ships. It is a lashing driver exclusively for band buckle RB.Type For type D Color Green Material Handle part PVC Surface Treatment Plating
