Levels / Spirit Levels / Line Markers
Angle meter / level and level / survey are tools for measuring angle, tilt, and level. Used for slope measurement, horizontal / vertical measurement, street alignment, etc. at construction sites. At the manufacturing site, flatness, straightness, and horizontal measurement of surface plates and machine tools are possible. The angle meter has a rotation mechanism and a circumferential scale, and includes an angle gauge. Some of them are automatically read by optical and magnetic methods, enabling precise measurement. Some files can be recorded and stored in an Excel file, etc. via a Bluethooth connection.
Other Related Pages
SK (Niigata Seiki) Super Magnetic Force LevelA strong magnet is attached to the measurement reference surface, which is very convenient for steel frame construction and plant construction. With a protector, it cushions the impact when dropped, prevents damage to building materials, and prevents slipping during work. Convenient for use in da... Read MoreAttracting Force (N) Magnet/118 Accuracy ± 1.50mm/m=0.0859 ° or less Bubble Tube Sensitivity 0.50mm/m=0.0286°- MonotaRO Digital Level Mini with Magnet PlasticA compact level made of resin. There is a magnet on the bottom. For horizontal / vertical / gradient measurement. * Do not use for any purpose other than angle measurement.Material Resin Mass (g) 190 Operating Temperature Range (℃) -10～50℃ Minimum Unit of Measurement (Digital display) 0.05 Automatic Power Off 5 minutes Bubble Tube Horizontal / vertical Bubble Tube Sensitivity (mm/m)：0.30=0.0172° Bubble Tube Accuracy (mm/m)：±2= ±0.1146° Measuring Accuracy (°) ±0.2
- BOSCH Cross Line Laser QUIGO PLUSEasy and compact! Bosch's new concept cross line laser. Since it is laser-irradiated, it does not leave stains on the line like a conventional level, and after pasting, the wallpaper line does not show through and it is possible to finish it beautifully. In addition, since continuous irradiat... Read MoreMass (g) 270 (including batteries) Power Supply AAA alkaline battery x 2 Accuracy Horizontal / vertical ± 0.8mm / m Continuous Operating Time (hours) About 5 Light Source Laser diode Wavelength (nm) 635 Automatic Correction Range ±4° Output (mW) 1 or less (Class 2)
- Tajima (TJM DESIGN) Elevator Tripod 1500Small elevator tripod standard Marking assistance / confirmation Various marking equipment for internal finishing work For positioning equipment in constructionIncluded Accessories Exclusive storage case Mass of Main Unit (g) 1700 Fixed core 5/8 inch
- STS Laser elevator tripod EL-CMSince the inside of the pipe penetrates, it is possible to irradiate the ground ink with the sumi appearance device attached. Rubber feet that do not damage the flooring surface. With a circular bubble tube, the tripod can be installed horizontally. Elevator tripod for sumi-inking device compatib... Read MoreThread Size 5/8 inch
- Tajima (TJM DESIGN) Perfect easy pot BWith a lid for opening and closing the inkpot for general use, the ink does not dry easily and can be used for a long period of time, making it easy to apply ink. With a cotton presser that can evenly soak the thread with ink. With an automatic deceleration mechanism for the ink tank with a maxim... Read MoreMass of Main Unit (g) 235
- YAMASHIN SEIKYO (YAMASHIN) Alien elevator tripodAlien elevator tripodIncluded Accessories Exclusive carry bag
- Tajima (TJM DESIGN) Perfect catch G3-700 with quick braSelf-winding type. Can be attached to wood, iron, aluminum sashes, and concrete. Uses a super strong magnet (magnetic flux density 130mT). The case is made of ABS resin body elastomer resin and is integrally molded to prevent slipping. Supports plumb bob with a weight of 100g to 1000g. Plumb bob ... Read MoreIncluded Accessories 400g x 1 piece Specification Automatic winding type Mass of Main Unit (g) 660from S$88.99Min. 2 days
- Shinwa Rules One pipe type for blue level gradientYou can see the tilt at a glance. Uses a single-tube bubble tube that allows continuous viewing from horizontal to 2.5 / 100 gradients. Can be washed with water by removing the bubble tube cover and side cap. Even if water or mud gets in during work, the inside can be washed with water, so it can... Read MoreMaterial (Main Unit) Aluminum Material (Cap) (Side) Rubber Material (Cover) ABS resin, polycarbonate Material (Bubble Tube) Glass Material (Fluid) Petroleum-based liquid
- STS Digital inclinometerThe liquid crystal display becomes an LED display, making it easy to read numerical values even in the dark. It is possible to compare and display with other angles by setting an arbitrary angle as the reference 0 °. If the main unit is turned upside down, the numerical value on the digital displ... Read MoreMass (g) 390 (including batteries) Power Supply 2 x AAA batteries Operating Temperature Range 0 ℃ ～ + 40 ℃ non-condensing Operating Humidity Range 70% or less No condensation Dust / Water Protection IP54 equivalent Bubble Tube Sensitivity 0.50mm/m=0.0286° Bubble Tube Accuracy ±1.5mm/m=±0.0859°from S$119.90Min. 2 days
- EBISU (Level) Pocket levelYou can measure water threads. You can measure pipes. It is a pen type and convenient to carry. With phosphorescence, it accumulates light in bright places and emits light in dark places for several minutes. Measurement of water thread. Measurement of pipes.Mass (g) 15 Accuracy ± 2.50mm / m = ± 0.1432 ° or less Sensitivity 0.50mm/m=0.0286° Magnet None
- JBSO Nylon Tegs (bobbin wound)Compact size. Display, hobby, etc.Mass (g) 33from S$4.79Min. 2 days
- Tajima (TJM DESIGN) Pea-Catch HAYAMA 1600Plumb bob cage for construction It can be attached to the wooden part with an installation needle (tapping needle) and to the iron part with a strong magnet (1.8 times more attractive force than our company). With adjustable adjuster 3x speed handle manual winding (winding 10m in 15 rotations) El... Read MoreMass of Main Unit (g) 500from S$119.90Min. 2 days
- Myzox LET-C for elevator tripodIt has a metallic finish. Elevator with elevating hardness adjustment mechanism. It is a safe design with a tripod fall prevention bar. It is a penetrating structure where you can see the ink. Installation of laser marking deviceSpecification With special case Material Aluminum alloy Mounting Screw Diameter 5/8 inch Myzox Code 213696from S$159.90Min. 2 days
- Akatsuki MFG (KOD) Gradient gradientBubble Tube Sensitivity 0.5mm/m=0.0286° Bubble Tube Accuracy ± 1.50mm / m = ± 0.0859 ° or less
- Obishi Keiki Seisakusho Precision Fix LevelA compact and highly sensitive precision level. It can be used in a wide range of applications such as centering in narrow positions, machine inspection, assembly, and built-in machine mounting.from S$379.90Min. 4 days
- TAKUMI Pokesumi partsParts for exclusive use of Pokezumi and Pokechoke Pokesumikaruco Convenient hook hole included, with rubber packing, stainless needle Pokesumi threading wire Used for Pokesumi thread replacement
- MURATEC-KDS Laser cross tripodSince it is an elevator type, you can easily adjust the standard of the horizontal line.Material Aluminum alloy Thread Diameter (inch) 5/8from S$98.99Min. 2 days
- Ohnishi Mfg Flat Level for General WorkThe main body is made of high-quality cast iron (FC250), and the bottom surface is finished on the V surface, so you can check the level by placing it on a steel pipe. There are two M5 tap holes on the back of the main body, and it can be attached to a base with a flexible measurement pitch or an... Read MoreScale Error Main bubble tube / ± 0.7 scalefrom S$679.90Min. 3 days
-
- TASCO High-grade aluminum level with magnetMeasuring range 0-40mm By reading the Vari-Pitch index, it is possible to measure how many millimeters there is a deviation with respect to 1 meter (1,000 mm).Resolution 10mmfrom S$64.99Min. 7 days
- PENTAX Electronic theodoliteThe ETH-500 series uses a clear segment LCD. A simple and convenient theodolite equipped with a hassle-free absolute encoder. A bright and sharp large-diameter lens realizes clear observations! A large display with lighting devices is installed on both the front and back sides. You can also use i... Read MoreSuitable for Applicable tripod: TC-70 Power Supply AA batteries x 4 (included) Magnification 30 times Protection Class IP44 Minimum Focusing Distance 1.35mfrom S$6,799.00Min. 8 days
-
- KAPRO Aluminum level SAMSONEquipped with a unique Dual-View system, vertical and horizontal observations can be made in the same plane. Comes with a shock-resistant side protector. For horizontal and vertical measurement.Color Red Accuracy 0.5mm/m=0.0286° 2018 Trusco page 1 2087from S$47.99Min. 3 days
-
- EBISU (Level) Slope level wideThe measurement surface has a special anti-slip coating that adheres to the object to be measured. With phosphorescence, it emits light in a dark place for several minutes.Mass (g) 174 RoHS directive (corresponding to 10 substances) Correspondencefrom S$37.99Min. 4 days
- MonotaRO Aluminum LevelLight and durable aluminum level. With V groove. With magnet. The horizontal measurement unit is a 6-wire bubble tube. For construction, civil engineering, interior, plastering, plumbing, electricity, equipment, etc. * Please refrain from using it for any other purpose. * Be sure to check the acc... Read MoreSpecification With V groove and strong magnet Material Body: Aluminum Accuracy ±1.0mm/m Magnet Included
- MonotaRO Digital angle meter mini with bottom magnetEasy-to-use mini size! A magnet is attached to the bottom. With zero setting and hold function. Comes with a convenient carrying case. For adjusting the angle of machines, jigs, molds, etc. * Do not use for any purpose other than angle measurement.Specification With magnet Material Aluminum Measuring Range 0～90° Mass (g) 77 Operating Temperature Range (℃) -10～50 Accuracy ±0.2° Minimum Reading (°) 0.1 Automatic Power Off 5 minutes
- MonotaRO Leveling string Fluorescent reel 0.8mmFluorescent color that stands out. With a shaft that can be inserted and turned. For construction, measurement work, etc. * Please refrain from using it for any other purpose. * There is no problem in use, but in rare cases, the thread may have seams due to manufacturing.Material Nylon thread
- MonotaRO Water thread Fluorescent color Reel winding 1.2mmFluorescent color that stands out. With a shaft that can be inserted and turned. For construction, measurement work, etc. * Please refrain from using it for any other purpose. * There is no problem in use, but in rare cases, the thread may have seams due to manufacturing.Material Nylon thread
- Tajima (TJM DESIGN) Boxes Level Stands ard with MagnetStandard type with magnet, aluminum box type level (main body aluminum plate thickness average 1.6 mm) HPIS bubble tube (easy to see from any angle, does not break, does not wrap) Both side protectors (Elastomer protectors that protect accuracy when dropped and do not damage building materials ar... Read MoreMaterial (Main Unit) Aluminum Accuracy ±1.25mm/1m(=0.072°) Surface Treatment Hard anodized processing Indicator Line 4 insert metal rings (2 left and right)
- JBSO Pure cotton water thread card windingUses pure cotton air-burning yarn For general surveying, kite string, crafts, and gardeningMaterial Pure cotton air fuel yarn
- Akatsuki MFG (KOD) Level with Round Eyebell MagnetIdeal for mounting on machines and equipment. Easy to install with a magnet. Horizontal measurement. Incorporation or installation in machines, equipment, etc.Magnet 1 place RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Elevator tripod made of aluminumSince the pipe of the equipment mounting part is a through hole, it is possible to irradiate with black ink. With a round bubble tube for horizontal confirmation. It is a rubber foot type and is firmly installed. Comes with a vinyl case that is convenient to carry. For tripods for laser marking d... Read MoreIncluded Accessories Dedicated storage plastic case Material Aluminum (frame part) Fixed core 5/8inch
- MonotaRO Digital level with magnetDigital display for easy reading of numerical values! A magnet is attached to the bottom. For horizontal / vertical / gradient measurement. * Do not use for any purpose other than angle measurement.Material Aluminum Mass (g) 290 Operating Temperature Range (℃) -10～50℃ Minimum Unit of Measurement (Digital display) 0.1 Automatic Power Off 5 minutes Bubble Tube Horizontal / vertical Angular Accuracy (°) 0.2 Bubble Tube Sensitivity (mm/m)：0.30=0.0172° Bubble Tube Accuracy (mm/m)：±1= ±0.0573°
- PROMART Titanium powder for megalineHigh-quality ultrafine particles that are well powdered and resistant to rain and wind, have good color development, and can draw clear lines. 1kg large-capacity container with side mood that shows the remaining amountColor White
- TAKUMI Mier water threadSmooth thread tension with a rotating shaft. Five colorful fluorescent colors that can be used more easily and easily. Plastic reel that is resistant to water. Uses the finest nylon thread with a thread stopper that does not unravel. * There is no problem in use, but in rare cases, the manufactur... Read MoreMaterial Nylon thread
- Tajima (TJM DESIGN) Slant LevelIt can be used in two ways: slope (angle) measurement and slope (angle) setting. Easy to grip and simple design. The body case is made of durable ABS resin. Easy-to-read large scale numerals. With slope and angle comparison table. Gradient meter for civil engineering, construction, interior work,... Read MoreMeasuring Range 130°-0°-130° Material (Main Unit) ABS resin Accuracy ±1° Minimum Reading (°) 2 Material (Bubble Tube) Acrylic
- Tajima (TJM DESIGN) Perfect catch G3-450 with quick braSelf-winding type. Can be attached to wood, iron, aluminum sashes, and concrete. Uses a super strong magnet (magnetic flux density 130mT). The case is made of ABS resin body elastomer resin and is integrally molded to prevent slipping. Supports plumb bob with a weight of 100g to 1000g. Architectu... Read MoreIncluded Accessories 400g x 1 piece Specification Automatic winding, with swing swing 400g Mass of Main Unit (g) 658
- Tajima (TJM DESIGN) P. Catch Plumb BobComes with a rubber ring that does not damage the object to be measured and a sword tip protection cap. Tip hardened. Plumb bob for construction * Be sure to wear a helmet and work gloves to prevent overhead falling and ensure work safety.Specification With 3m thread Material (Main Unit) Steel
Filter by categories
