Syringe Pumps

Syringe data of major manufacturers is entered in advance, making it easy to select. Multiple conditions can be set, such as injection volume, injection time, and injection volume per hour. The setting conditions and the integrated injection amount are displayed. * Syringe is sold separately.

Flow rate setting is an easy operation just by setting with the dial.

You can easily set multiple conditions such as injection amount, injection time, and injection amount per hour. The setting conditions and the integrated injection amount are displayed. * Syringe is sold separately. * Recommended syringe: Hamilton Gastight Syringe 1000/1700 series

Since 90 types of frequently used syringes are stored in memory, all you have to do is select the type. The IC3210 monitors and displays the total amount of injection / suction during operation. When the power is turned on, the last used setting value will be activated. RS232C interface connectio... Read More

Compact design with separate ultra-small drive and controller. .. Built-in high-speed stepping motor that boasts outstanding accuracy. .. If you use a 4-branch controller (BS-MD1020), you can set different flow rates for up to 4 units.

Equipped with a microprocessor at the heart, flow stability and reproducibility are greatly improved. .. 90 types of typical syringes (Terumo, Nipro, Hamilton, etc.) are stored in memory, so just select the syringe. You can also directly enter the inner diameter of the syringe. .. Monitor the acc... Read More

Equipped with a microprocessor at the heart, flow stability and reproducibility are greatly improved. .. 90 types of typical syringes (Terumo, Nipro, Hamilton, etc.) are stored in memory, so just select the syringe. You can also directly enter the inner diameter of the syringe. .. Monitor the acc... Read More

Equipped with a microprocessor at the heart, flow stability and reproducibility are greatly improved. .. 90 types of typical syringes (Terumo, Nipro, Hamilton, etc.) are stored in memory, so just select the syringe. You can also directly enter the inner diameter of the syringe. .. Monitor the acc... Read More

Since the cable is 97 cm, only the drive part can be installed in a cold room, etc., and the flow rate can be controlled from the outside. Since the bottom of the drive is a magnet, it can be set vertically. Up to 4 BS-MD1020s can be controlled at the same time with different flow rate settings. ... Read More

An experimental / research pump with very little pulsation and suitable for quantitative liquid feeding. In addition to the injection-only and injection / suction switching models, there are dual models equipped with two independent pumps and high-pressure models suitable for sending liquids such... Read More

Various settings are possible with a large color touch display. .. A high-performance stepping motor is controlled by a microprocessor. .. The metal and highly rigid body minimizes vibration during operation, and the screw-in syringe clamp firmly fixes the syringe, resulting in significantly impr... Read More

Only the drive part can be installed inside the chamber, etc., and remote control can be performed from the outside. Flow rate setting is as easy as turning the dial to the scale. Two drives can be driven at the same time by adding an optional remote control cable. * Syringe is sold separately. *... Read More

Only the drive part can be installed inside the chamber, etc., and remote control can be performed from the outside. Flow rate setting is as easy as adjusting the dial to the scale. By adding a remote control cable (sold separately), you can drive two drives at the same time. Can be fixed to the ... Read More

High-performance type with excellent cost performance. Syringe data of major manufacturers is entered in advance, making it easy to select. Multiple conditions can be set, such as injection volume, injection time, and injection volume per hour. You can monitor the injection status on your compute... Read More

Equipped with a microprocessor, a controlled high-performance stepping motor moves various syringe no-planciers at a constant speed. Compared with the conventional mechanical type syringe pump, the stability and reproducibility are remarkably improved, the pulsating flow is extremely small, and a... Read More

The sophisticated micro stepping motor drive is adopted, and stable flow performance can be obtained. Equipped with a large high-resolution touch display, you can check all the information in operation at a glance. When placed vertically, the display automatically changes to portrait orientation.... Read More