Asbestos / Dioxin Measuring Related Supplies

・Replacement option for A type/B type/C30 type/NW354 type. For low volume *Please select according to the filter paper size.

It is a compliant product of the American NIOSH asbestos measurement method (METHOD 7400). A membrane filter (pore size 0.8 μm) and a backup filter are set in the sampling holder. It can be used with various samplers. For asbestos

-A cable with a connector for the digital dust meter LD-5R type. -Used to extract the analog voltage and insulation pulse output equivalent to the LD-5R type concentration measurement from the main unit.

It can be used for piping for particle generators/measuring instruments such as DMA and electrospray.

AC adapter for digital dust meter LD-3K2/3B/3C/5D.

This is an optional item for the digital dust meter LD-5R.

・Meets the specifications of the filter paper holder with cowl described in the Asbestos Monitoring Manual Version 4.1.・The cowl is made of aluminum to reduce the effects of static electricity.・The base part of the conventional open face type holder can be shared. For asbestos Φ47mm

Many of our digital dust meters are used to measure suspended particulate matter related to work environments. There are advantages. On the other hand, due to the characteristics of the obtained relative concentration, it is necessary to calculate the mass concentration conversion factor based on... Read More

Optional parts for the digital dust meter LD-5.

- Standard flow meter set for asbestos sampler.・It is possible to calibrate the suction flow rate with the filter attached by simply connecting to an asbestos sampler made by Shibata Scientific.・Five types are available for each asbestos sampler, so please select the one that matches your sampl... Read More

Optional parts for the digital dust meter LD-5D.

・An optional product for the digital dust meter LD-5R.・Operable OS: Windows 8.1/10

-A standard accessory for the asbestos atmospheric sampler AS-100. -It is possible to raise the position of the 30 cm sampling holder by attaching it to a tripod. For 300mm AS-100

Optional parts for the digital dust meter LD-5R/LD-5D/LD-5.

-Spare parts for asbestos sampler AS100 type. -The Φ47mm asbestos sampling holder can be fixed to a tripod. For 47mm holder

Optional parts for the digital dust meter LD-3S/5R.

Spare parts for digital dust meter LD-3 series.

・A simple measuring instrument that emphasizes mobility, and can easily measure the concentration of PM2.5 particles floating in the air.・Simple measurement of PM2.5 particles is possible in a short time wherever you want to measure with a portable type.・It is a light scattering type dust mete... Read More

For digital dust meter P-5 type.

-An option for the fiber monitor F-1 / F-1K, which can be operated for about 8 hours when used in combination with the built-in battery. -Charge the fiber monitor F-1 / F-1K using the standard AC adapter.

- Standard flowmeter set for asbestos sampler AS-100.・The suction flow rate can be calibrated with the filter attached. For AS-100 cowl

Many of our digital dust meters are used to measure suspended particulate matter related to the work environment, etc., and as a relative concentration meter using a light scattering method, data can be obtained in a shorter time than the filtration collection method, and it is sudden. There are ... Read More

Spare parts for digital dust meter LD-3K2/-3B/-3C.

Optional parts for fiber monitor F-1.

-Maintenance parts for asbestos sampling pumps that are replaced regularly. -Attach the filter paper holder with the filter attached, and determine the replacement time from the maximum suction flow rate. For AIP-105 / -205 type

Optional part for digital dust meter LD-3B/3C.

・It is an optional part that can be used for mini pump MP-W5P/ΣNII/ΣN.・The sampling holder can be supported by pinching the tube connected to the mini-pump.

A sampling holder attached to the asbestos sampler AS-510/APS-7. For Φ25mm, open-face type membrane filters with a filter diameter of Φ25mm (effective diameter Φ22mm) and PTFE binder filters can be used. The one for Φ47mm is AS-100 type open face type Φ47mm sampling holder. Used as a personal sam... Read More

Membrane filter with a diameter of Φ47mm can be used for asbestos sampler AS-100 and various pretreatments.

-Spare parts for AS-510 / 520 type asbestos sampler. -A metal fitting for attaching the asbestos sampling holder Φ25 mm to a tripod.

Spare parts for digital dust meter detector AP-632/AP-705.

-Fix the sampling holder by sandwiching the connection tube attached to the back of the mini pump. -Use by attaching to the mini pump used for MP-ΣN and APS6 / 62. For MP-Σ, APS-6 / 62

・Meets the specifications of the filter paper holder with cowl described in the Asbestos Monitoring Manual Version 4.1.・The cowl is made of aluminum to reduce the effects of static electricity.・The base part of the conventional open face type holder can be shared.

Φ25mm membrane filter used for asbestos sampler AS-510 and APS-1/-6/-7.

-A filter paper clip that attaches a membrane filter for asbestos sampling.・ A set of 10 filter paper clips to which a Φ47 mm membrane filter can be attached. -You can put it in a transparent case with the filter paper attached, and store up to 10 sets in a special wooden box to carry it.

Spare parts for digital dust meter LD-3 series.

Optional parts for the digital dust meter LD-3K2.

・Fix the sampling holder by pinching the mounting connection tube on the back of the minipump.・I attach it to the mini pump used for MP-ΣN/ΣNII and APS-7/72 and use it.

It is a sizing device that can measure PM2.5 particles by attaching it to the air sampling port of the digital dust meter LD-5 / LD-5R type.