Filter Holders

A manifold used when filtering multiple samples at the same time. * Wrap sealing tape around the tapered thread for piping.

It is a double manifold for viable cell count test. Compact design that connects directly to the Microsalt / e.jet pump. The quick connection makes it easy to attach and detach the tube. Compatible with various containers and funnels by replacing the filter base.

A filter holder compatible with 25/47 / 90 mm membrane filters. KGS-47-TF is a specification that the filter surface does not stick even if autoclave sterilization is performed with the filter set.

Suitable for filtration of chemicals that dislike contact with metals and filtration of corrosive solutions. It is used in the biochemical field such as filtration sterilization and particle removal of nucleic acids, proteins, enzyme solutions, etc.

It is a funnel (spare part) that comes standard with the Φ47mm set of filter holders.

・It is used for support screen type of filter holder Φ25mm. - The mesh is made up of 2 layers of 100 mesh that are shifted by 46°.・I put a filter (filter paper) on the top and use it.

A filter holder made of PP (polypropylene) with excellent chemical resistance.

An inexpensive and easy-to-use plastic holder for vacuum filtration. ● A vacuum filter consisting of a funnel with a scale, a support screen, an O-ring, a rubber stopper, and a base. ● Made of polysulfone resin, it has excellent mechanical properties and can be autoclaved repeatedly.

This is a Φ25mm clamp for sandwiching and fixing the filter holder funnel and the glass (filter) holder.

It is used by setting it on the Φ25mm support screen type of the filter holder.

It is suitable for the filtration of chemical solutions that do not contact metals, and for the filtration of corrosive solutions. The IN side is designed to be open-faced, so that particles can be captured uniformly on the filter surface and used for the inspection and analysis of particles and... Read More

・Use it by setting it in the Φ25mm type of filter holder.・The glass filter is welded.

It is used when conducting microbiological tests, fine particle tests, etc. The effective filtration area is designed so that the mesh of the membrane filter with ruled lines (grid at 3.1 mm intervals) is 100.

An easy-to-use plastic holder for vacuum filtration. Membrane filtration can be done more easily. Made of polysulfone resin, it has excellent mechanical strength and heat resistance, and can be repeatedly autoclaved (121 ° C for 20 minutes).

Ideal for microbiological inspection, fine particle inspection, and measurement of suspended substances by suction filtration.

・Spare parts for support screen type filter holder Φ25mm.・Put it between the SUS support screen and the glass base.

Used to connect with a 500mL suction bottle for Φ25mm type filter holder.

Suitable for filtration of chemicals that dislike contact with metals and filtration of corrosive solutions. It is highly resistant to most chemicals and does not contaminate ultra-high purity acids, alkalis, organic solvents and other chemicals.

・Use it by setting it in the φ25mm type of SPC filter holder.・The glass filter is welded.

- A filter with a glass filter sandwiched between a glass head and a polypropylene funnel.・Because it is a screw type, it is easy to assemble and disassemble, and it has a structure that makes it easy to wash each part.

・Optional parts for the glass filter holder.・By connecting to SUS316 support screen type, two-stage filtration is possible.

・A filter holder for a Φ47mm filter, with a glass filter (P160) welded to the filter base.・All parts connected to the filtrate are made of glass, so it is suitable for filtering in metal analysis, which does not like contact with stainless steel.・The filtration bottle is an SPC storage bottle ... Read More

It is used when filtering a relatively large amount of liquid under reduced pressure.

- Filter holder for Φ25mm filter. The support screen is made of SUS316 and can be removed for easy cleaning and replacement.・Borosilicate glass-1 is used for the glass part of the filter holder. (Suction bottle is borosilicate glass-2) ・Suitable for general analysis by vacuum filtration.・Two t... Read More

It is used when filtering a relatively large amount of liquid under reduced pressure.

It is a glass base that is used by setting it on the Φ47mm support screen type of the SPC filter holder.

It is used when performing microbiological tests, fine particle tests, etc. Use when the sample is small or when filtration is required in a small filtration area.