Stirring Device Related / Blades
Stirrer equipment options and blades are blades that are fixed to the stirrer stand or shaft. The stirrer is used in the field of scientific research and experiments. Blades that work directly on solutions and agitate can be used in a variety of materials and shapes depending on the purpose. Feather materials include stainless steel, Teflon and glass. For wings with bosses, the shaft diameter and fixing position are not important. There is also a unit that can make the work of one stirrer equivalent to two.
Other Related Pages
Leona Stirring Impeller Disk TurbineIf it is a Φ8mm shaft, it can be fixed at any position and used.from S$8.49Min. 6 days- SIBATA SCIENTIFIC TECHNOLOGY Stirring Blade Set for M Type・It is an optional replacement blade for the propeller type dedicated to the stirrer M series.・If it is a Φ8mm shaft, it can be fixed at any position and used.・It is used for stirring general-purpose liquids. - Since it has a boss, it can be fixed at any position on the stirring bar with a set... Read MoreBlade Diameter (mm) (F-40)Φ40、(P-60)Φ60、(DF-70)Φ70、(T-80)Φ80from S$38.99Min. 33 days
- FLON INDUSTRY PEEK screw parts for PTFE jet type stirring bladesRod Diameter (mm) For 8 Type F-4105-06 TGK Part No. 803-17-66-06from S$149.90Min. 6 days
- Tokyo Glass Kikai (TGK) Stirring blade tip propeller R Made of SUS316For the tip, it can be fixed to the tip of the shaft with the nut attached to the stirring shaft. With a boss, it can be fixed to any position on the stirring shaft with the set screw on the boss. It can also be used in multiple stages.TGK Part No. 386-63-04-02 Product Name Propeller Rfrom S$9.79Min. 6 days
-
- AS ONE Stirring Blade (Made of SUS304)Wall Thickness (mm) 0.8 Applicable shaft diameter (Φmm) 8
- SIBATA SCIENTIFIC TECHNOLOGY Stirring Blade for Tornado Fan (M Type Series)・It is an optional replacement blade for the propeller type dedicated to the stirrer M series.・If it is a Φ8mm shaft, it can be fixed at any position and used.・It is used for stirring general-purpose liquids. - Since it has a boss, it can be fixed at any position on the stirring bar with a set... Read MoreMaterial Stainless steel (SUS316)
-
- YAMATO SCIENTIFIC Clamp Holder for Three-One MotorThe large double muff can hold up to a stand pole diameter of 21 mm and a stirrer arm diameter of 16 mm at the correct angle.Specification Stirrer arm diameter: Maximum Φ16mm Pole Diameter (Φmm) Up to 21 Material Zinc die castingfrom S$46.99Min. 2 days
-
- IKA Stirring Blade (Propeller Type 4-BLade)Standard stirring blade. The sample is sucked from top to bottom. Shear force is generated locally. Generates an axial flow in the container. Used at medium and high rpm.Number of Fan Blades 4 Material Stainless steel (SUS316L)
-
- AS ONE Economy Stirring BladeSince the entire stirring blade is coated with PP (polypropylene), it is suitable for stirring general chemicals.Overall Length (mm) 350 Shank Diameter (Φmm) 8from S$68.99Min. 4 days
- AS ONE PTFE Stirring BladeApplicable shaft diameter (Φmm) 8 Hole Diameter (Φmm) 9 Material Fluorine resin (PTFE)from S$8.29Min. 2 days
- AS ONE PTFE Stirring BladeBlade Thickness (mm) 3.2 Material Fluorine resin (PTFE)from S$11.99Min. 2 days
- AS ONE PTFE Stirring Blade (Detachable Type)Material Fluorine resin (PTFE)from S$119.90Min. 2 days
-
-
-
- KOKUGO PTFE Vacuum SealThe PTFE vacuum seal is completely sealed using a low friction bearing and sleeve (with glass) as the sealing material. If the sealing performance deteriorates, tightening the head screw will improve the sealing performance. Bearing 8Φ is used.Suitable Diameter (Φmm) (Stirring rod) 8from S$199.90Min. 8 days
-
- IKA Stirring Blade (Dissolving Type)Radial stream of water. The sample is sucked from above and below. The turbulence is large and the shear force is high. Crushing particles. Used at medium and high rpm.Shaft Length (mm) 350 Material Stainless steel (SUS316L)from S$599.90Min. 13 days
-
- AS ONE Tornado Stirring BladeAny Φ8mm shaft can be fixed and used. * The larger the size, the greater the resistance. Please note that the load on the stirrer will increase depending on the container, capacity, and viscosity. * The load applied to the main body of each stirring blade varies depending on the size and shape. T... Read MoreType Anchor with bossfrom S$199.90Min. 4 days
-
- IKA Agitation Blade (Anchor Type)Tangent type water flow. High shear modulus occurs at the periphery and blade edge. Minimal settling on the container wall. Used at low rpm. Polymer reaction, uniform dispersion of high mineral components in liquids. Ideal for stirring medium and high viscosity fluids.Material Stainless steel (SUS316L)from S$779.90Min. 2 days
-
-
- IKA Stirring Blade (Propeller Type 3-BLade)Streamlined. The sample is sucked from the top and bottom. Minimal shear force. Used at medium and high rpm. Material is SUS316L (R1389 is PTFE coated specification)Number of Fan Blades 3from S$679.90Min. 9 days
- KENIS V packing for PTFE stirring sealIt can be completely sealed by stacking 3 pieces in the stirring seal. If a set of 3 pieces is worn, replace it and use it.Applicable Hole Diameter (Φmm) 8from S$25.99Min. 4 days
- ARAM PTFE stirring seal (for decompression)It can be completely sealed by stacking 3 V-packings inside the stirring seal. Loosen the top nut, insert the stir bar, and tighten the nut to seal. The inner diameter of the stirring seal is 8 mm.Hole Diameter (Φmm) 8from S$68.99Min. 7 days
- SANSYO PTFE stirring seal packingReplacement packing for PTFE stirring seal. Replace if worn.Quantity (pieces) 3 Hole Diameter (Φmm) 8 Material PTFEfrom S$22.99Min. 9 days
- SANSYO PTFE vacuum sealThis product is vacuum sealed with SUS bearings to prevent runout. Recommended stirring rod diameter Φ7.9 mm.Seal Diameter (Φmm) 8 (7.9 for centerless stirring rod)from S$329.90Min. 9 days
- KENIS Temperature sensor for hot magnet stirrer MI03Using this temperature sensor with MI03 enables highly accurate temperature control of ± 0.5 ° C.from S$63.99Min. 3 days
- FLON INDUSTRY Agitated blade made of half moon FHole Diameter (Φmm) (Wings) 9 Material Made of PTFEfrom S$6.99Min. 34 days
- IKA Spiral stirring bladeThe stirring blade and shaft are integrated to enable stable stirring without core deviation.Shaft Diameter (Φmm) 8 Material Stainless steel (SUS316L) Dimension (mm) Φ50×350from S$779.90Min. 10 days
- Nitto Kagaku Ball for alumina pot millThe main raw material is high-purity alumina, which is an aggregate of microcrystals sintered at a constant temperature, has high altitude and stickiness, and has high impact strength and excellent wear resistance. Due to the dense material and high specific gravity, the crushing efficiency is go... Read MoreMaterial Alumina, number of alumina bags (pieces) Mass (kg) 1 2018 Trusco page 10 1160
-
- KOBELCO Eco-Solutions Highly Efficient Multi-Functional Impeller Agitaor FULLZONE(R) Test BladeBy arranging two wide panel blades vertically, it is a stirring blade that enables efficient uniform mixing over a wide viscosity range. Highly efficient (energy saving) stirring is possible compared to conventional blades. Demonstrates excellent stirring performance even in solid-liquid and liqu... Read MoreOverall Length (mm) 500 Shaft Diameter (Φmm) 8 Material SUS304 (Buff # 320 gloss surface finish)from S$779.90Min. 13 days
-
