Stop Cocks for Experiment & Research

A stop cock with a common standard luer taper used for syringes and needles at each connection port. The two-way type can be switched between OPEN and CLOSE with a cock. The three-way type is a cock that allows you to switch either two of the three to OPEN or all three to CLOSE. The cock has a st... Read More

Has excellent chemical resistance and heat resistance.

By attaching it to an itto-kan or pail can, subdivision work can be done easily. It can be attached and detached with one touch and can be used repeatedly. Since the discharge head rotates, it is possible to reduce liquid dripping after opening the lever.

Backflow prevention connector for soft tubes with a built-in spring ball valve.

For flexible soft tubes such as fluororubber, silicone, and tygon. The red body is made of polypropylene and the white plug in the center is made of high density polyethylene and cannot be disassembled. Heat resistant temperature 5-40 ℃. Withstand voltage of about 100 kPa. There are two holes of ... Read More

Backflow prevention connector for soft tubes with a built-in diaphragm valve.

Ultra-compact backflow prevention connector for soft tubes with a built-in diaphragm valve.

Suitable for soft tubes such as PVC, PE, and silicon.

Suitable for soft tubes such as PVC, PE, and silicon.

Easy to use with a large rotating knob. The knob operation makes it easy to adjust the amount of water from stop to maximum discharge within about 90 degrees. Since the discharge head rotates, liquid dripping can be reduced.

For flexible soft tubes such as fluororubber, silicone, and tygon, for opening and closing on three sides. You can rotate the central plug to open either two or OPEN / CLOSE all three. The wetted part is made of PTFE and has chemical resistance, so it can be used in a wide range from low temperat... Read More

The arrow on the plug tells you the direction of flow.

You can adjust the flow rate in 12 steps up to CLOSE just by pressing with your thumb.

The mini needle valve can be finely adjusted by connecting a tube, glass tube, stainless steel tube, etc.

Liquid can be continuously sucked and discharged, and the connected syringe can be used as a continuous liquid feed pump. Continuous liquid delivery is possible by connecting to a syringe and a liquid tank.

A small backflow prevention connector for soft tubes with a built-in duck bill valve.

Since it is a two-screw type, it can be firmly fixed from thin pipes to thick pipes. Has excellent corrosion resistance, chemical resistance, and durability.

Fluororesin coating has been applied to the R thread.

Fluororesin coating has been applied to the R thread.