Heat Exchangers
A heat exchanger is a device that efficiently exchanges thermal energy between two types of fluids (liquid and gas) with different temperatures. It is characterized by transferring heat from a high-temperature fluid to a low-temperature fluid for heating and cooling. Specifically, cooling and heating are performed by sending water, hot water, steam, etc. inside the coil tube. Coil tubes are made of stainless steel, titanium, fluorinated resin, etc. Stainless steel has excellent chemical resistance, but it is possible to rust with chlorine-based chemicals, so be careful. There is also a type that can be used independently in a liquid in a vat of 10 to 20 L, and a highly efficient double-tube type.
Other Related Pages
- AS ONE Stainless Steel Cooling SerpentineFlexible! Throw-in type heat exchanger. Made of stainless steel (SUS304) with excellent corrosion resistance and chemical resistance. Three sizes can be selected according to the capacity and the object.Type Immersion type Material Stainless steel (SUS304) Inner diameter of coil diameter (mm) Φ6 Outer diameter of coil diameter (mm) Φ8
- AS ONE Free Standing Coil Heat Exchanger (Stainless Steel)It is self-supporting in the liquid in the vat of about 10 to 20 L, and water, hot water, steam, etc. are sent to the coil tube to cool and heat it.Coil diameter (mm) 150 Overall Height (mm) 400 Inner diameter of coil diameter (mm) 6 Outer diameter of coil diameter (mm) 8 Material Stainless steel (SUS304)from S$689.90Min. 4 days
- AS ONE Titanium Cooling CoilWall Thickness (mm) (Cooling pipe) 0.5 Coil Outer Diameter (Φmm) 10 Cooling water flow rate (L / min) 4~10 Bamboo shoot For hose inner diameter Φ10mm Included Accessories SUS304 support Material TTH-340W (Titanium type 2 pipe)from S$679.90Min. 4 days
- AS ONE Cooling, Heat Dissipation, Thawing PlateEliminates waiting time! A plate for heat dissipation and heat absorption that takes advantage of the features of aluminum, which has good thermal conductivity. Since there is no frame, it can be used outside the plate. It is possible to further enhance the heat dissipation effect by stacking the... Read MoreAs ONE Part Number 3-8933-01 Type Plate typefrom S$129.90Min. 4 days
- AS ONE Free Standing Coil Heat Exchanger (Fluorinated Resin)Coil diameter (mm) 150 Overall Height (mm) 400 Inner diameter of coil diameter (mm) 6 Outer diameter of coil diameter (mm) 8 Material Fluoropolymerfrom S$779.90Min. 4 days
- AS ONE Cooling, Heat Dissipation, Thawing PlateEliminates waiting time! A plate for heat dissipation and heat absorption that takes advantage of the features of aluminum, which has good thermal conductivity. Since there is a rise on the outer circumference, the liquid during thawing is prevented from flowing out. It is possible to further enh... Read Morefrom S$119.90Min. 4 days
- AS ONE Double Tube Heat Exchanger (Stainless Steel)Coil diameter (mm) 112 Overall Height (mm) 230 Material Stainless steel (SUS304)from S$1,399.00Min. 2 days
- AS ONE Cooling StageThe plate surface temperature can be set in the range of -20 to + 40 ° C. Continuous experiments at low temperatures can be observed under a microscope. Cryogenic materials and biological experiments and quick freezing of samples are possible. It is very quiet because it does not use a compressor... Read MoreType (Cool stage) -20 ~ 40 ℃ As ONE Part Number 3-6618-01from S$6,499.00Min. 27 days
- AS ONE Double Tube Heat Exchanger (Fluorinated Resin)Coil diameter (mm) 112 Coil winding width (mm) 230 Overall Height (mm) 230 Material Fluoropolymerfrom S$1,399.00Min. 13 days
- AS ONE Cooling StageThe plate surface temperature can be lowered from room temperature to -40 ° C using only the Peltier element, enabling experimental observation at extremely low temperatures. Continuous experiments at low temperatures can be observed under a microscope. Cryogenic materials and biological experime... Read MoreType (Cool stage) -40 ℃ ~ Room temperature As ONE Part Number 3-6618-02from S$6,999.00Min. 27 days
- AS ONE Stirling refrigerator (for R & D incorporation)It is an earth-friendly cooling system that uses helium gas as the refrigerant and is oil-less. Direct cooling of the object to be cooled is possible, and no refrigerant piping is required. The input can be set in about 250 steps of DC 1 to 5V or 4 to 20mA.Discontinued
- AS ONE Vertical vapor condenserjacket diameter (Φmm) 25 Inner pipe (Φmm) Outer diameter: 10, Inner diameter: 8 Connection Bore Diameter (Φmm) Outer diameter: 10, Inner diameter: 8 Pillar Dimensions (mm) Φ10×50Discontinued
- AS ONE Stirling refrigerator (cold side adapter)Cold side adapter for Stirling refrigerators SC-UB04 and SC-UD08.As ONE Part Number 1-1329-03Discontinued
- AS ONE Stirling refrigerator (for R & D incorporation)It is an earth-friendly cooling system that uses helium gas as the refrigerant and is oil-less. Direct cooling of the object to be cooled is possible, and no refrigerant piping is required. The input can be set in about 250 steps of DC 1 to 5V or 4 to 20mA. It is possible to attach a heat exchang... Read MoreAs ONE Part Number 1-1328-02Discontinued
- AS ONE Heat exchange pipe (cleaning zone)Operating Temperature Range (℃) -10~+60 Thermal Conductivity (W/mk) 0.21 Maximum Operating Pressure (MPa) 0.6 Material Polyolefin resin Suitable Fluid Purified water or antifreezeDiscontinued