All Category

Interior Building Materials

Interior building materials are materials that are often used in areas that are often noticeable, such as floors, storage, and ceilings. Insulating materials are sometimes used to enhance thermal insulation performance, and repair agents and protective materials are sometimes used to finish corners of crops. The interior building materials used in private houses are abundant in products such as boards that have been treated to prevent deterioration and water-resistant decorative plywood that is used in places where moisture is likely to be trapped, such as dressing rooms. There are many related products such as antiseptic piles and reinforcing members to increase strength.
View : Grid List
Filter

Items 1 - 40 of 694

Set Ascending Direction
  1. Ceiling seal
    HISAGO Ceiling seal
    Easy to put on holes and scratches on the ceiling. You can hide stains and stains. You can choose the design according to the pattern of the ceiling. The corners are rounded to prevent it from peeling off, and it does not stand out even when pasted. Since the release paper has slits, pasting work... Read More
    Material  PP synthetic paper 
    Rating:
    83%
    from S$6.29
    Min. 2 days
  2. Styrofoam IB
    Dupont Stylo (Former Dow Chemical) Styrofoam IB
    Foam plastic heat insulating material Class A Extrusion method Polystyrene foam Thermal insulation plate 1 class b Difficult to transfer heat Light, durable and excellent heat insulation performance that does not absorb water Easy to process Recyclable Stable quality and supply For general constr... Read More
    Thermal Conductivity (W/mk)  0.040 or less (0.034kcal / mh ℃)  Specific heat (kcal / kg ・ ℃)  0.27  Compressive strength (N / cm 2 16 or more (1.6kgf / cm 2)  Bending strength (N / cm 2 20 or more (2.0)  Oxygen index  26 or more  Linear Expansion Coefficient (×10-5/℃)  Heat distortion temperature (℃)  80  Dimensions, Width W x Length L (mm)  910×1820  Act on Promoting Green Procurement  Conformity  Formaldehyde grade  F☆☆☆☆  JIS Standard  JIS A 9511:2006R  Density (kg/m3 over 20 
    Rating:
    92%
    from S$109.90
    Min. 2 days
  3. Pegboard
    iteck Pegboard
    The combination of boards and parts creates a fashionable wall surface. Can be attached to gypsum board using parts (sold separately). With frame For room interiors, plasterboard and various walls, washbasins and kitchens
    Hole Distance (mm)  Approximately 25.4 (1 inch) 
    Rating:
    90%
    from S$21.99
    Min. 2 days
  4. Kanelite Foam E1
    Kaneka Kanelite Foam E1
    Excellent heat insulation performance. The gas was trapped in a small bubble of closed cells. As a result, the values of "convection, radiation, and conduction" of heat, which are known as the three elements of heat conduction, are fixed small. Closed cells block heat and suppress conde... Read More
    Liquid absorption  0.01g / 100cm 2 or less  Thermal Conductivity (W/mk)  0.040 or less  Moisture permeability coefficient (ng / m 2 sPa)  145 or less  Linear expansion coefficient (cm / cm.℃)  6~8×10-5  Heat distortion temperature (℃)  80 (short term), 70 (long term)  Dimensions, Width W x Length L (mm)  910×1820  Act on Promoting Green Procurement  Conformity  Formaldehyde grade  F☆☆☆☆  Combustion Quality  Pass  Compressive strength (N / cm 2 over 20  Density (kg/m3 over 20  Bending strength (N / cm 2 over 20 
    Rating:
    83%
    from S$86.99
    Min. 2 days
  5. Pegboard
    WAKI Pegboard
    Enjoy storage according to the space! The perforated board uses natural wood. Please enjoy the unique texture of natural materials such as the difference in color and pattern. The front side is painted with "prevention of hand stains". There are also parts such as special hooks, gypsum ... Read More
    Hole Distance (mm)  25  Hole Diameter (Φmm)  Material  China plywood (F ☆☆☆☆)  Painting  Table (urethane paint), back (no paint) 
    Rating:
    88%
    from S$25.99
    Min. 2 days
  6. Outside corner
    Hikari Mold Outside corner
    It is widely used as a protective material and repair material for corners of the room.
    Material  Hard ABS 
    Rating:
    75%
    from S$5.99
    Min. 2 days
  7. Veneer
    WAKI Veneer
    When attaching to a gypsum board, please attach a commercially available special screw separately.
    Dimension (mm)  17×100×460  Material  MANGO 
    from S$13.99
    Min. 4 days
  8. Plywood
    UNIT (UNIT SAFETY SIGNS) Plywood
    It is a plywood board on which signs can be attached. * There are individual differences in color.
    Thickness (mm)  5.5 
    Rating:
    79%
    from S$10.99
    Min. 2 days
  9. Color Wood Veneer Shelf Board
    IRIS OHYAMA Color Wood Veneer Shelf Board
    A decorative shelf board with a lightweight lumbar core structure. The weight per same volume is about two-thirds lighter than the DIY board, making it easier for women to work. * Delivery may be refused if the delivery destination is narrow. Please check in advance.
    Rating:
    82%
    from S$23.99
    Min. 2 days
  10. Dairoton Travertine
    DAIKEN Dairoton Travertine
    For buildings and stores If the delivery destination is a private house (detached house / apartment house), the shop name is required. Please note that delivery may not be possible if there is no store name. * Depending on the delivery location, the delivery date may be postponed and additional s... Read More
    Workability  Abandoned construction method  Flammability  Noncombustible NM-8599  Base Material  Rock wool acoustic board 
    Rating:
    82%
    from S$48.99
    Min. 2 days
  11. White Edge Guard
    Hikari Mold White Edge Guard
    You can finish it beautifully just by attaching it to a small edge such as plywood or plywood or a cut edge.
    Length (mm)  1000  Color  White 
    Rating:
    68%
    from S$1.19
    Min. 2 days
  12. binder
    Hikari Mold binder
    You can hide the edges of plywood and plastic plates for a beautiful finish.
    Length (mm)  1000  Material  Rigid PVC 
    Rating:
    92%
    from S$1.99
    Min. 2 days
  13. Aluminum border
    Hikari Mold Aluminum border
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Length (mm)  1000  Material  6063 aluminum  Width (mm)  25  Finish  Anodized finish 
    Rating:
    83%
    from S$8.29
    Min. 2 days
  14. Transparent binder
    Hikari Mold Transparent binder
    You can hide the edges of plywood and plastic plates for a beautiful finish. * It is not transparent.
    Length (mm)  1000  Material  Hard ABS 
    Rating:
    84%
    from S$2.99
    Min. 2 days
  15. Wood grain tape
    Hikari Wood grain tape
    It is a convenient tape for DIY and small remodeling of furniture etc. It is convenient for covering the cut surface of self-made shelf boards such as DIY finishing and remodeling furniture, and for easy remodeling of furniture.
    Rating:
    85%
    from S$7.99
    Min. 2 days
  16. Aluminum joiner
    Hikari Mold Aluminum joiner
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Material  6063 aluminum  Finish  Anodized finish 
    Rating:
    96%
    from S$2.69
    Min. 2 days
  17. Long baseboard
    TOLI Long baseboard
    Vinyl purse standard. Introducing vibrant colors that make color coordination even more fun.
    Length (m)  12  Height (mm)  60  Thickness (mm)  About 1.7  Abbreviation  LTHS60  Type  R ant  Material  Vinyl chloride resin 
    Rating:
    93%
    from S$54.99
    Min. 2 days
  18. Unistrut Channel Joiner
    Hikari Mold Unistrut Channel Joiner
    It can be used for end parts (U-shaped) such as plywood and plastic plates. You can hide the edges and finish it beautifully.
    Width (mm)  11  Material  Rigid PVC 
    Rating:
    100%
    from S$0.95
    Min. 2 days
  19. PVC Angle
    Hikari PVC Angle
    It is a material suitable for repair and DIY, etc. Various repair / hobby / DIY materials Can be widely used as a protective material or repair material for corners in the room.
    Rating:
    100%
    from S$0.99
    Min. 6 days
  20. DAIKEN Board Wood Textured Ceiling Material SHIZUKA W
    DAIKEN DAIKEN Board Wood Textured Ceiling Material SHIZUKA W
    Shizuka W has many fine pores that store excess moisture (condensed capillary water). When it is dry, it releases the accumulated moisture, and when it is humid, it accumulates excess humidity to maintain comfortable humidity.
    Finish Processing  (Rim) Reality of four sides, chamfering  Eco Mark Certification Number  05111008  Thickness (mm)  12  Dimension (mm)  303×606  Mass (kg)  Approx. 13 (18 total)  Eco Mark Certification  Certification  Act on Promoting Green Procurement  Conformity  Formaldehyde grade  F☆☆☆☆  Base Material  Insulation board 
    Rating:
    85%
    from S$59.99
    Min. 2 days
  21. Transparent PS binder
    Hikari Mold Transparent PS binder
    You can hide the edges of plywood and plastic plates for a beautiful finish. * It is not transparent.
    Thickness (mm)  Material  Hard PS  Width (mm)  Height (mm)  15  Length (mm)  1000 
    from S$3.79
    Min. 2 days
  22. Kabuse
    Hikari Mold Kabuse
    You can finish it beautifully just by attaching it to a small edge such as plywood or plywood or a cut edge.
    Rating:
    80%
    from S$1.19
    Min. 2 days
  23. Aluminum drainer
    Hikari Mold Aluminum drainer
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Material  6063 aluminum  Length (mm)  1000  Finish  Anodized finish 
    Rating:
    100%
    from S$4.99
    Min. 2 days
  24. Protective repair material for cloth (outside corner)
    Hikari Mold Protective repair material for cloth (outside corner)
    It is widely used as a protective material and repair material for corners of the room. Please use it as a material for protecting and repairing dirt and scratches on the corners of the wall. * 1581 and 1583 are items that cannot be delivered to individual homes. Only the corporate name can be de... Read More
    Finish  Cloth sheet pasting  Length (mm)  1000  Material  Hard ABS  Thickness (mm) 
    Rating:
    100%
    from S$4.79
    Min. 2 days
  25. Free Angle
    Hikari Mold Free Angle
    It is widely used as a protective material and repair material for corners of the room. The angle can be changed freely.
    Thickness (mm)  Length (mm)  1000  Material  Hard PVC + soft PVC 
    Rating:
    80%
    from S$3.79
    Min. 2 days
  26. T-15 with feet
    Hikari Mold T-15 with feet
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Material  Rigid PVC  Length (mm)  1000 
    Rating:
    90%
    from S$0.98
    Min. 2 days
  27. Color decorative shelf board LBC-625
    IRIS OHYAMA Color decorative shelf board LBC-625
    A decorative shelf board with a lightweight lumbar core structure. The weight per same volume is about two-thirds lighter than the DIY board, making it easier for women to work.
    Dimensions, Width W x Depth D x Height H (mm)  600×250×18  Main Materials  Falkata Lumbar Core 
    Rating:
    87%
    from S$16.99
    Min. 2 days
  28. Aluminum joiner
    Hikari Aluminum joiner
    A metal material suitable for repairs and DIY, etc. Materials for various repairs, hobbies, and DIY Aluminum joiners that are lightweight and have excellent workability. For wall materials, partition materials, eaves ceiling materials, etc.
    Material  Aluminum  Finish  B2 anodized 
    Rating:
    100%
    from S$4.39
    Min. 6 days
  29. Around edge D.W10X10
    Hikari Mold Around edge D.W10X10
    It is a general-purpose mold material that is commonly used. Please use it for decoration and repair of the surrounding edges of the ceiling corner and the inner corner of the wall surface.
    Color  White wood  Material  Hard ABS  Height (mm)  10  Surface Treatment  Wood grain sheet pasting  Width (mm)  10 
    Rating:
    80%
    from S$8.49
    Min. 5 days
  30. Iron plate kabuse
    Hikari Mold Iron plate kabuse
    You can hide the edges of plywood and plastic plates for a beautiful finish.
    Thickness (mm)  Height (mm)  8.5  Material  Rigid PVC  Length (mm)  1000  Width (mm)  3.15 
    Rating:
    80%
    from S$1.29
    Min. 2 days
  31. Free angle
    Hikari Mold Free angle
    It is widely used as a protective material and repair material for corners of the room. The angle can be changed freely.
    Length (mm)  1000  Thickness (mm)  1.3  Material  Hard PVC + soft PVC 
    Rating:
    80%
    from S$5.59
    Min. 2 days
  32. Tsumepitat
    Wing Tsumepitat
    It stays tight because it has claws !! You don't have to worry about fixing the heat insulating material. Katsume Pita just inserts it into the heat insulating material and hits the screw. Airtightness is improved because it can be firmly fixed. Unlike double-sided tape, it does not generate ... Read More
    Hole Diameter (Φmm)  5.4  Outer Diameter (Φmm)  32 
    Rating:
    100%
    from S$25.99
    Min. 2 days
  33. Cloth protective repair stone (outside corner)
    Hikari Mold Cloth protective repair stone (outside corner)
    It is widely used as a protective material and repair material for corners of the room. Please use it as a material for protecting and repairing dirt and scratches on the corners of the wall. * 1580 and 1582 are products that cannot be delivered to individual homes. Only the corporate name can be... Read More
    Length (mm)  1000  Thickness (mm)  Finish  Cloth sheet pasting  Material  Hard ABS 
    Rating:
    80%
    from S$4.79
    Min. 2 days
  34. Wall-mounted Shelf for Gypsum Board
    HILOGIK Wall-mounted Shelf for Gypsum Board
    Scars are less noticeable. Easy to install in 3 steps. 1. Attach the mounting guide to the wall 2. Attach the hanging bracket 3. Hook the main body * Use screws with a hole diameter of 4Φ and a hole diameter of 35 mm or more. Use a flat-blade screwdriver, etc. to remove the special hanging bracket.
    Rating:
    85%
    from S$47.99
    Min. 2 days
  35. Wood grain cutting
    TOLI Wood grain cutting
    Please use it to alleviate steps when laying a part and to protect the edges of the fabric floor. Since it is adsorbed on the back side, it does not damage the flooring. * Please note that if the base flooring material is scratched or the strength is weak, the surface of the basement flooring mat... Read More
    Width (mm)  (Top) 5, (Bottom) 20  Specification  Adsorbent on the back  Height (mm)  6.5  Length (cm)  100 
    Rating:
    80%
    from S$59.99
    Min. 2 days
  36. TC-15 with feet
    Hikari Mold TC-15 with feet
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Finish  Wood pattern sheet pasting  Material  Rigid PVC  Length (mm)  1000 
    Rating:
    100%
    from S$1.69
    Min. 2 days
  37. Deep mouth Kabuse
    Hikari Mold Deep mouth Kabuse
    You can finish it beautifully just by attaching it to a small edge such as plywood or plywood or a cut edge.
    Finish  Wood pattern print  Height (mm)  19  Length (mm)  1000  Material  Hard ABS 
    Rating:
    75%
    from S$5.79
    Min. 2 days
  38. Compact resin skirting board
    PANEFRI INDUSTRIAL Compact resin skirting board
    Since it is a soft resin, it can be easily cut, and it is easy to install by just sticking it with an adhesive. Please use it for arranging your room.
    Thickness (mm)  Width (mm)  35  Overall Length (m)  Material  PP (polypropylene) 
    Rating:
    70%
    from S$45.99
    Min. 2 days
  39. Joiner H Type
    Hikari Mold Joiner H Type
    It can be used for joints (type D) such as plywood and plastic plates. You can hide the edges and finish it beautifully.
    Width (mm)  12  Material  Rigid PVC 
    from S$0.93
    Min. 2 days
  40. Edge Guard End
    Hikari Mold Edge Guard End
    It is widely used as a protective material and repair material for corners of the room.
    Thickness (mm)  2.5  Material  Hard ABS 
    Rating:
    90%
    from S$3.59
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 694

Set Ascending Direction