All Category

Wand Holders

View : Grid List
Filter

Items 1 - 40 of 50

Set Ascending Direction
  1. Cane and screw fixing type V
    Sincere Cane and screw fixing type V
    A type of cane holder that holds a desk or counter and fixes it with screws. Firmly support the cane so that it does not fall over. As it is a screw type, it can be removed. It can be used for moving desks.
    Suitable Size (Φmm)  (Cane diameter) 16-25  Top Plate Thickness (mm)  13~30  Material  ABS resin / elastomer  Installation  Screw 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  2. Walking stick
    Sincere Walking stick
    A cane holder that can be attached to a desk or reception counter with an adhesive sticker. Firmly support the cane so that it does not fall over. The cane Yasume T type is attached to the top plate, and the L type is attached to the wall surface.
    Suitable Size (Φmm)  (Cane diameter) 16-25  Installation  Adhesive seal  Material  Elastomer 
    Rating:
    93%
    from S$14.99
    Min. 2 days
  3. Cane Standing
    Fukuoka Life Support Cane Standing
    It can be easily attached anywhere with double-sided tape. (Depending on the condition of the mounting surface, it may come off easily.)
    Material  EVA 
    Rating:
    90%
    from S$9.29
    Min. 2 days
  4. Cane holder Tsuepon S thin slim type
    Office lab Cane holder Tsuepon S thin slim type
    Can grip a cane with a diameter of 15 to 25 mm. Easy installation with double-sided tape. With explanation plate.
    Material  ABS resin  Material (Spring)  Stainless steel 
    Rating:
    90%
    from S$11.99
    Min. 2 days
  5. For walking sticks and pipes
    Sincere For walking sticks and pipes
    A type of cane holder that is fixed to a pipe with a cable tie. You can adjust the hook angle in 30 ° increments with a Phillips screwdriver.
    Material  PP, elastomer, iron, nylon, rubber  Mounting Dimensions  Round pipe diameter of about 2-4cm 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  6. Cane fall prevention device
    UWA Cane fall prevention device
    You can put the cane without falling down! For wheelchairs, use rubber rubber instead of a cane holder to adjust the mounting position according to the height of the holding table, etc.
    Size  Type  No string  Suitable Size (cm)  Φ2.1-2.5 cane  Mass (g)  27  Color  Brown  Dimensions (cm)  10.2×3.7×2.2 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  7. Wand and screw type W
    Sincere Wand and screw type W
    There are 5 types of color variations in all. A type of cane holder that holds a desk or counter and fixes it with screws. Firmly support the cane so that it does not fall over. As it is a screw type, it can be removed. It can be used for moving desks. Since the holder part is carved with uneven ... Read More
    Suitable Size (Φmm)  (Cane diameter) 16-25  RoHS directive (corresponding to 10 substances)  Top Plate Thickness (mm)  30~50  Material  ABS resin, elastomer  Installation  Screw 
    Rating:
    100%
    from S$64.99
    Min. 2 days
  8. Cane leaf
    Sincere Cane leaf
    A type of cane hook that attaches directly to the cane. The back of the leaf is made of an elastomer material, which makes it non-slip against the ground plane. Therefore, it is a convenient product that can prevent the cane from tipping over by simply hanging the leaf part on a table or the like.
    Suitable Size (Φmm)  (Cane diameter) 19-20  RoHS directive (corresponding to 10 substances)  Material  Nylon resin, elastomer 
    from S$9.79
    Min. 2 days
  9. Cane Holder Screw Fixing
    Sincere Cane Holder Screw Fixing
    It can be easily attached by sandwiching it with the top plate of the table with screws. It is easy to remove by loosening the screw. It is a type that is fixed by sandwiching it with screws on the top plate.
    Material  Body / ABS resin, hook / elastomer 
    from S$17.99
    Min. 2 days
  10. Stick holder
    ATOM LIVINTECH Stick holder
    It can be attached to the side of a chair or desk, on the wall, etc., and can be used as a temporary storage when a stick or umbrella is not needed. The pitch of the mounting screws is 15 mm to 22 mm. Either a truss parker screw or a truss machine screw can be installed. When using truss machine ... Read More
    from S$2.99
    Min. 2 days
  11. Stick Holder
    AS ONE Stick Holder
    It can be fixed to a chair, etc. with a Velcro belt or screw.
    Belt Length (mm)  200  Dimension (mm)  32×42×28  As ONE Part Number  8-5393-01  Material  Body / PP (polypropylene)  Included Accessories  With one fixing screw  Applicable Dimensions (mm)  Φ27 
    Rating:
    20%
    from S$17.99
    Min. 2 days
  12. Cane and screw screw type cloth
    Sincere Cane and screw screw type cloth
    There are 5 types of color variations in all. A type of cane holder that holds a desk or counter and fixes it with screws. Firmly support the cane so that it does not fall over. As it is a screw type, it can be removed. It can be used for moving desks. Since the holder part is carved with uneven ... Read More
    Suitable Size (Φmm)  (Cane diameter) 12-22  RoHS directive (corresponding to 10 substances)  Top Plate Thickness (mm)  13~30  Material  ABS resin, elastomer  Installation  Screw 
    Rating:
    100%
    from S$64.99
    Min. 5 days
  13. Wand holder (Tsuetsueho) Fixed L type
    Ms Japan Wand holder (Tsuetsueho) Fixed L type
    It can be fixed by sticking it on a horizontal surface with an adhesive sticker.
    Dimension (mm)  100×130×30  Mass (g)  75 
    from S$59.99
    Min. 2 days
  14. Cane fall prevention device
    UWA Cane fall prevention device
    You can put the cane without falling down! For wheelchairs, use rubber rubber instead of a cane holder to adjust the mounting position according to the height of the holding table, etc.
    Color  Brown  Type  Attached  Mass (g)  33 
    from S$22.99
    Min. 9 days
  15. Cane stand
    Matsuyoshi & Co Cane stand
    A compact cane stand that does not take up space. To prevent it from tipping over, the lower iron plate is made to have an appropriate weight, and a non-slip transparent rubber cushion is placed under it.
    Mass (kg)  1.3  Matsuyoshi & Co., Ltd. Code  23-2553-00  Dimension (mm)  Φ180×H600 
    Rating:
    70%
    from S$97.99
    Min. 2 days
  16. One-touch cane
    CAR MATE One-touch cane
    "Cane holder" that prevents the cane from falling over The arm opens just by lowering it, and the adhesive sheet on the back side sticks tightly. It can be attached and detached with one touch. Convenient accessory for a cane
    Mass (g)  (Cane) up to 400  RoHS directive (corresponding to 10 substances)  Product Mass (g)  14  Suitable Size  16mm to 23mm in diameter (cane)  Size (mm)  91×23×34  Material  ABS, PE, aluminum, stainless steel 
    Rating:
    100%
    from S$16.99
    Min. 6 days
  17. Wand holder (Tsuetsueho ~) Fixed T type
    Ms Japan Wand holder (Tsuetsueho ~) Fixed T type
    It can be fixed by sticking it on the wall with an adhesive sticker.
    Dimension (mm)  100×50×115  Mass (g)  75 
    from S$59.99
    Min. 3 days
  18. Wand holder (Tsuetsueho ~) Moving L-shaped type
    Ms Japan Wand holder (Tsuetsueho ~) Moving L-shaped type
    Since the back side is an adhesive pad, it can be easily peeled off and moved even after it is pasted.
    Dimension (mm)  100×130×30  Mass (g)  75 
    from S$59.99
    Min. 3 days
  19. A cane
    Debika A cane
    It can be stuck and peeled off repeatedly. Made of easy-adsorbing polyurethane resin. Washing with water is OK. This is convenient when you want to place a "cane / umbrella" for a while. Please use it at the entrance or the reception desk of a hospital.
    Dimensions, Width W x Depth D x Height H (mm)  About 95 × 60 × 18  Material  Polyurethane resin  Type  Clear type 
    from S$19.99
    Min. 6 days
  20. Cane
    UWA Cane
    Rating:
    100%
    from S$12.99
    Min. 6 days
  21. Cane Fixing Holder
    AS ONE Cane Fixing Holder
    Applicable Dimensions (mm)  (Stand) 15-22  Size  114×23×20mm  As ONE Part Number  8-6956-01  Mass (g)  About 29 
    from S$22.99
    Min. 3 days
  22. Stick holder
    KOWA Stick holder
    The cane leaning is stable. Open the main body to the left and right and attach it by sandwiching the cane.
    Matsuyoshi & Co., Ltd. Code  23-6241-00 
    from S$8.99
    Min. 5 days
  23. Anti-fall Walking Stick K1400EⅡ
    UWA Anti-fall Walking Stick K1400EⅡ
    When you want to use both hands or when you are seated, you can put the cane on without tilting it.
    RoHS directive (corresponding to 10 substances) 
    from S$19.99
    Min. 6 days
  24. Cane Holder Tsuetsu Eho L-type (moving type)
    Matsuyoshi & Co Cane Holder Tsuetsu Eho L-type (moving type)
    It can be peeled off and can be installed anywhere on a horizontal surface. The cane holder is soft and elastic.
    Dimensions, Width W x Depth D x Height H (mm)  100×130×30  Type  L type 
    from S$64.99
    Min. 8 days
  25. Can Holder C Type
    UWA Can Holder C Type
    Applicable Dimensions (mm)  (Stand) 11-25  Mass (g)  30  Dimension (mm)  42×46×120  Allowable Load  550g  As ONE Part Number  8-5726-01  Material  Elastomer / ABS resin  Included Accessories  Screw (2.6 × 10, 2.6 × 20mm) x 2 each 
    from S$38.99
    Min. 4 days
  26. Walking stick stand (for 10)
    Matsuyoshi & Co Walking stick stand (for 10)
    A walking stick stand that can store 10 pieces. As it is a leaning type, it is ideal for installation at the reception.
    Matsuyoshi & Co., Ltd. Code  24-3081-00  Mass (kg)  Dimensions, Width W x Depth D x Height H (mm)  770×150×540  Material  Natural wood 
    from S$169.90
    Min. 8 days
  27. Cane Holder
    AS ONE Cane Holder
    Number of Storage (pieces)  15  Dimension (mm)  580×140×460  As ONE Part Number  8-6957-01  Specification  Assembly (tool required)  Material  Wood 
    from S$129.90
    Min. 4 days
  28. Wand holder  Tsuepon SB  For bedside rail
    Office lab Wand holder Tsuepon SB For bedside rail
    Push the cane in and hold the fallen cane firmly. Let's decide where to put the cane to eliminate a fall accident! It can also be used as an umbrella holder! ・ Install by sandwiching the pipe. Can be attached to a pipe of 1.4 to 2.6 cm. A cane holder that can be easily attached to and remove... Read More
    Suitable Diameter (Φmm)  (Wand) 15-25  Quantity per Case  30  Load capacity (g)  350  Mass (g)  48  Dimensions, Width W x Depth D x Height H (cm)  9×8×3  Material  Body: ABS resin, Spring: Stainless steel 
    from S$13.99
    Min. 6 days
  29. Wand that does not fall ε (excellent)  With string, magnet type
    UWA Wand that does not fall ε (excellent) With string, magnet type
    A "non-falling cane" that can be placed without the cane falling over. With product liability insurance. Dress-up window sheet, with 4 patterns. With safety function (drag accident mitigation function): When a "wand" is caught in the door of a train or bus, a large load is app... Read More
    Quantity per Case  10  Mass (g)  15  Load capacity (g)  350  unit dimention (cm)  8.7 
    from S$24.99
    Min. 6 days
  30. Wand Yasume  L type
    Sincere Wand Yasume L type
    If you have a holder where you want to put a cane or umbrella, you don't have to worry about it falling over. It can be easily installed with just an adhesive sticker without making holes in the wall. Since it uses a soft elastomer material, the cane will not be damaged.
    Suitable Diameter (Φmm)  (Wand) 16-25  Quantity per Case  40  Mass (g)  48  dimension, width x depth (cm)  8×8  Type  Adhesive type  Color  Black  Material  Elastomer 
    from S$16.99
    Min. 6 days
  31. Wand holder  Tsuepon SBL  For handrail pipe
    Office lab Wand holder Tsuepon SBL For handrail pipe
    Push the cane in and hold the fallen cane firmly. Let's decide where to put the cane to eliminate a fall accident! It can also be used as an umbrella holder! ・ Install by sandwiching the pipe. Can be attached to a handrail of 2 to 3.2 cm. The mounting clip rotates and can be mounted at any a... Read More
    Suitable Diameter (Φmm)  (Wand) 15-25  Quantity per Case  30  Load capacity (g)  350  Mass (g)  54  Dimensions, Width W x Depth D x Height H (cm)  9×9.8×3  Material  Body: ABS resin, Spring: Stainless steel 
    from S$13.99
    Min. 6 days
  32. Cane Yasume Leaf
    Sincere Cane Yasume Leaf
    Simply hang the leaves on a table to prevent the cane from tipping over. It is now possible to stop with rubber to prevent it from falling off.
    Suitable Diameter (Φmm)  (Wand) 19-20  Mass (g)  10  Dimensions (cm)  5.3×6.3×1.5  Quantity per Case  60  Included Accessories  Non-slip rubber 
    from S$12.99
    Min. 6 days
  33. Wand that does not fall εⅡ (excellent two)  No string type
    UWA Wand that does not fall εⅡ (excellent two) No string type
    Colorful windows and sheets! 4 patterns can be changed. You can coordinate with a fashionable wand. You can hold the "wand" with the power of the magnet. For car bodies and metal furniture (offices, facilities, hospitals), etc.
    Quantity per Case  10  Mass (g)  15  Load capacity (g)  350  unit dimention (cm)  8.7 
    from S$22.99
    Min. 6 days
  34. Wand hook C type
    Fujihome Wand hook C type
    Prevents the wand from falling over.
    dimension, width x height (cm)  4.5×2.3  Mass (g)  About 5  Color  Black  Material  Body: Nylon, Sheet: Polyurethane 
    from S$9.79
    Min. 6 days
  35. Hand-off prevention strap  Pokopoko
    MARUTOKU Hand-off prevention strap Pokopoko
    When you put it on your wrist, your hands are free. It's easy to take out things in your bag! -With a hook that can also be used to bind folding wands. Because it is made of rubber, it softens the impact on the wrist when it falls.
    Suitable Diameter (Φmm)  (Wand) About 18-25  Quantity per Case  10  Mass (g)  Material  Inside: rubber, outside: polyester 
    from S$10.99
    Min. 6 days
  36. Walking Support Stick Tsuepon R Double-sided Tape Mounting Type
    Office lab Walking Support Stick Tsuepon R Double-sided Tape Mounting Type
    Push the cane in and hold the fallen cane firmly. Decide where to put the cane to eliminate a fall accident! It can also be used as an umbrella holder! ・ Hold a 1.9-2.7 cm cane. Holds a cane that rolls easily in the bathroom, washroom, and kitchen. Can be easily fixed with double-sided tape.
    Suitable Diameter (Φmm)  (Wand) 19-27  Mass (g)  18  Load capacity (g)  350  Dimensions, Width W x Depth D x Height H (cm)  5.2×4.7×3  Quantity per Case  50  Material  Body: ABS resin, Spring: Stainless steel 
    from S$6.99
    Min. 2 days
  37. leaning holder
    MIRAI INDUSTRY leaning holder
    from S$10.99
    Min. 5 days
  38. Wand Yasume  X (Cross) type
    Caremax Wand Yasume X (Cross) type
    If you have a holder where you want to put a cane or umbrella, you don't have to worry about it falling over. Support team original color. Since it is a type that is sandwiched between the top plate of the table with screws, it can be installed without making holes. Since it is a screw type, ... Read More
    Suitable Diameter (Φmm)  (Wand) 12-22  Quantity per Case  40  Mass (g)  50  dimension, width x depth (cm)  6×8.5  Material  Body: ABS, Hook: Elastomer  Specification  Sandwich type  Installable dimensions (cm)  Top plate 1.3-3  Color  yellow 
    from S$17.99
    Min. 6 days
  39. Cane Holder
    PLUS (Stationey) Cane Holder
    * Please note the following points for products shipped directly from the furniture manufacturer. * We cannot accept changes, cancellations, returns, or exchanges after ordering due to customer's convenience. In case of unavoidable cancellation, we may charge a "cancellation fee" at... Read More
    from S$13.99
    Min. 34 days
  40. Stickless stick K1900E
    UWA Stickless stick K1900E
    When you want to use both hands or when you are seated, you can put the cane on without tilting it.
    RoHS directive (corresponding to 10 substances) 
    from S$29.99
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 50

Set Ascending Direction