All Category

Identification & Display

View : Grid List
Filter

Items 1 - 40 of 126

Set Ascending Direction
  1. Name tag holder for hospital rooms (for horizontal writing)
    Matsunaga (Wheelchair) Name tag holder for hospital rooms (for horizontal writing)
    Material  Acrylic  Type  State of the art 
    from S$21.99
    Min. 8 days
  2. Name card (plastic)
    Matsuyoshi & Co Name card (plastic)
    from S$33.99
    Min. 8 days
  3. Bed name (both round and square type)
    navis Bed name (both round and square type)
    It can be used for both round pipes and square pipes. * Cold insulation material is not included.
    Included Accessories  Exclusive paper x 1 (for replacement  Suitable Pipe Diameter (Φmm)  Maximum Φ38 
    from S$8.49
    Min. 2 days
  4. Rotating Name Tag Board
    LIHIT LAB. Rotating Name Tag Board
    A sign board that rotates the sign tag, which is also ideal for visual management by color. A convenient sign board that rotates with a light push with your fingertips. Since it can be recognized even from a distance, it is ideal for visual management by color according to the application. * 25 r... Read More
    Length (mm)  18  Width (mm)  585  Material  Steel 
    from S$84.99
    Min. 2 days
  5. Acrylic frame
    Matsuyoshi & Co Acrylic frame
    It is a simple frame that shows signs and information beautifully. With two hook holes that can be used both vertically and horizontally and can be hung on the wall.
    Material  Acrylic 
    from S$28.99
    Min. 8 days
  6. Bed name A type (with paper)
    Matsuyoshi & Co Bed name A type (with paper)
    Included Accessories  1 bed name sheet  Material  Polyvinyl chloride 
    from S$6.99
    Min. 8 days
  7. Pro-Share Identification Band
    AS ONE Pro-Share Identification Band
    It is a special hook type that can be easily fastened, and once closed, it cannot be removed unless it is cut. You can easily write directly on the band with a ballpoint pen or oil-based magic. It is waterproof and can be used for washing and bathing. It feels good on the skin and is gentle on th... Read More
    Suitable for  (Around) 95-230mm  Dimension (mm)  (Entry part) Approx. 25 x 65  Length (mm)  250  Perimeter (mm)  95~230  Material  PVC (vinyl chloride resin) 
    from S$33.99
    Min. 2 days
  8. Bed name that can be written in large letters
    navis Bed name that can be written in large letters
    The patient's name can be written in a large size, and there is a reading column. We have a "Nurse in charge" column, so please use it for primary care. The "Remarks" column is convenient for entering the patient identification ID number, etc. It can be used for both round... Read More
    Mounting Diameter (Φmm)  (Pipe) Maximum Φ38mm  Dimension (mm)  160×135  Included Accessories  Special paper x 1 
    from S$9.69
    Min. 2 days
  9. Bed name holder
    Matsuyoshi & Co Bed name holder
    * Card sold separately.
    from S$13.99
    Min. 8 days
  10. Meal tag (type A)
    Matsuyoshi & Co Meal tag (type A)
    Dimension (mm)  40×60  Material  Polyvinyl chloride 
    from S$1.39
    Min. 2 days
  11. Bed name
    navis Bed name
    Included Accessories  1 sheet of paper (for replacement  Pipe Diameter (Φmm)  Up to 38 
    from S$7.39
    Min. 3 days
  12. Bed Name Paper (Type 1)
    AS ONE Bed Name Paper (Type 1)
    As ONE Part Number  0-835-31  Dimensions, Height x Width (mm)  70×130 
    from S$36.99
    Min. 3 days
  13. Nameplate for Hospital Rooms (Both Vertical and Horizontal) (Plain)
    Matsuyoshi & Co Nameplate for Hospital Rooms (Both Vertical and Horizontal) (Plain)
    Material  Acrylic  Type  No way 
    from S$9.69
    Min. 2 days
  14. Bed name holder (snap type)
    Matsuyoshi & Co Bed name holder (snap type)
    A bed name holder with a horizontal rescue sign. * Cards and signs are sold separately.
    Dimension (mm)  179×97  Matsuyoshi & Co., Ltd. Code  20-5224-00  Type  Snap type  Color  White 
    from S$8.29
    Min. 8 days
  15. Bed plate
    LIHIT LAB. Bed plate
    A plate showing the patient's name on a bed with a round frame
    Width (mm)  146  Height (mm)  130  Length (mm)  40  Material  Hard PVC 
    from S$15.99
    Min. 6 days
  16. Bed name (T type)
    Matsuyoshi & Co Bed name (T type)
    Large format bed name holder into which B5 paper can be inserted. The bed number can be displayed larger when using any bed. For both round and square pipes.
    Dimension (mm)  260×237  Material  Polyvinyl chloride 
    from S$14.99
    Min. 8 days
  17. Magnet mark (with letters)
    navis Magnet mark (with letters)
    It can be used as an instruction mark on the inpatient / resident list according to various purposes.
    from S$21.99
    Min. 3 days
  18. Concatenated personal case
    navis Concatenated personal case
    Since it is a connected type, you can carry a lot at once. Since the bottom part is R-shaped, it is easy to take out even small tablets. Since it is a left-right connection type, it can be used in various ways. Since the personal case is available in 5 colors, it will be easier to check the manag... Read More
    Depth (mm)  35  Dimensions, Width W x Depth D x Height H (mm)  82×36×61  Material  PS (polystyrene) 
    from S$4.79
    Min. 3 days
  19. Horizontal form for name tag for hospital room
    Matsuyoshi & Co Horizontal form for name tag for hospital room
    Rescue sign magnets are attached for 3 colors x number of people.
    from S$23.99
    Min. 8 days
  20. Bed name H type
    Matsuyoshi & Co Bed name H type
    This is the bed name for beds with panels. The special adhesive sheet catches the bed panel firmly, so it will not easily slip or peel off. If the adhesive strength drops, wash the adhesive sheet surface with water to restore the adhesive strength.
    Dimension (mm)  143×78  Material  Polyvinyl chloride 
    from S$11.99
    Min. 8 days
  21. Room name display board (front, 15 type)
    Matsuyoshi & Co Room name display board (front, 15 type)
    Matsuyoshi & Co., Ltd. Code  09-2031-00  Dimension (mm)  150×50  Material  Acrylic board (white)  Letter  Mincho body (black)  Specification  With adhesive tape on the back  Type  With front, 15 type 
    from S$16.99
    Min. 2 days
  22. Bed name sticker
    KERUN Bed name sticker
    A disposable bed name sticker that can be attached to bedside boards. Uses a special adhesive that leaves no marks even when peeled off.
    Dimension (mm)  133×76  Material  Mirror coat tack, seal type 
    from S$15.99
    Min. 8 days
  23. Magnet mark (without letters)
    navis Magnet mark (without letters)
    ★ Since it has a sintered magnet on the back, it can also be used for whiteboards.
    Dimensions, Height x Width x Thickness (mm)  20×15×5  Letter  No character 
    from S$18.99
    Min. 3 days
  24. Name tag holder for hospital rooms
    Matsuyoshi & Co Name tag holder for hospital rooms
    from S$23.99
    Min. 8 days
  25. Mother-child name band (non-sterile)
    Matsuyoshi & Co Mother-child name band (non-sterile)
    It's made of a very soft material, so it won't hurt your baby's skin. Even after wearing the belt, you can adjust the size according to the thickness of your ankle. The display numbers are 1 to 120 (there are missing numbers such as 4 and 9), and 100 pieces are included. The newborn b... Read More
    Length (mm)  (For newborns) 136, (for mothers) 73  Matsuyoshi & Co., Ltd. Code  24-2557-00  Material  NBR 
    from S$159.90
    Min. 5 days
  26. Bed name with pocket
    Matsuyoshi & Co Bed name with pocket
    A bed name holder with a snap-on bed name and a medication pocket. Includes 50 paper name cards and 1 emergency sign (all red and half red).
    from S$42.99
    Min. 8 days
  27. Room name display board
    Matsuyoshi & Co Room name display board
    Matsuyoshi & Co., Ltd. Code  09-2021-00  Dimension (mm)  250×75  Material  Acrylic board (white)  Type  Front / Round Goshi white  Letter  Round gothic body (dark blue)  Specification  With adhesive tape on the back 
    from S$42.99
    Min. 2 days
  28. Name tag stand
    navis Name tag stand
    It can also be used as a dietary restriction tag.
    Dimensions, Width W x Depth D x Height H (mm)  100×50×70  Material  PMMA (acrylic)  Specification  With 1 sheet of paper 
    from S$4.79
    Min. 3 days
  29. Bed name G type
    Matsuyoshi & Co Bed name G type
    This is the bed name for beds with panels. The surface is specially processed, so you can erase it as many times as you like with water-based magic. It can be stuck and peeled off many times (if the adhesive strength drops, wash the adhesive sheet surface with water to restore the adhesive streng... Read More
    Dimension (mm)  165×110 
    from S$6.49
    Min. 8 days
  30. Bed name card
    navis Bed name card
    A large and easy-to-read bed name. It can be used for both round pipes and square types.
    Dimension (mm)  220×160  Included Accessories  Special paper (210 x 148 mm) x 1  Suitable Pipe Diameter (Φmm)  Up to about 40 
    from S$4.29
    Min. 4 days
  31. Mysco Inpatient Identification Band
    Matsuyoshi & Co Mysco Inpatient Identification Band
    A soft material that does not give a sense of discomfort to the skin. You can write directly on the band with a ballpoint pen or oil-based magic. It is a hook type and can be easily fastened, and once fastened, it will not come off.
    Dimension (mm)  25×234  Material  EVA・HPE 
    from S$57.99
    Min. 5 days
  32. Nameplate stand (L type)
    Matsuyoshi & Co Nameplate stand (L type)
    Dimension (mm)  70×110 
    from S$4.29
    Min. 8 days
  33. Bed name K type
    Matsuyoshi & Co Bed name K type
    Square pipe (40 mm square) for beds only. Includes 1 bed name sheet.
    Included Accessories  1 bed name sheet  Dimension (mm)  140×145  Matsuyoshi & Co., Ltd. Code  24-6569-00  Material  Polyvinyl chloride 
    from S$8.49
    Min. 8 days
  34. Name tag horizontal type
    navis Name tag horizontal type
    ★ It is a name tag for the list of inpatients and residents. ★ Since it has a sintered magnet on the back, it can also be used for whiteboards.
    Size  22.5×95mm  Type  With back magnet 
    from S$67.99
    Min. 12 days
  35. Meal Tag Stand (40 × 60 × 30mm)
    AS ONE Meal Tag Stand (40 × 60 × 30mm)
    Dimension (mm)  (L) 40 x (W) 60 x (D) 30 mm  Suitable Size  (Paper) 60 x 35mm  As ONE Part Number  0-830-01  Material  PMMA (acrylic)  Specification  With 1 sheet of paper 
    from S$2.89
    Min. 4 days
  36. Bed Name Holder Woodgrain
    AS ONE Bed Name Holder Woodgrain
    With a slit, it is easy to put in and take out cards. You can also use the bed name card output from the electronic medical record. You can put a thermometer, a pen, etc. in the accessory pocket. It is a gentle wood grain that is easy to match with the atmosphere of the hospital room. * Bed name ... Read More
    matching card size (mm)  (Maximum) 150 × 90  Suitable Pipe Diameter (Φmm)  (Maximum) 38  Material  PVC (vinyl chloride resin) 
    from S$10.99
    Min. 4 days
  37. Name tag holder for hospital rooms
    Matsuyoshi & Co Name tag holder for hospital rooms
    Matsuyoshi & Co., Ltd. Code  09-2230-01  Dimension (mm)  40×127  Material  Acrylic 
    from S$12.99
    Min. 8 days
  38. Inpatient identification band
    navis Inpatient identification band
    It is a special hook type and once closed, it will not come off. It is waterproof and there is no problem with the washbasin. It feels good on the skin and is gentle on the skin.
    Material  PVC (vinyl chloride resin) 
    from S$99.90
    Min. 3 days
  39. Meal card card
    Matsuyoshi & Co Meal card card
    Dimension (mm)  35×60 
    from S$25.99
    Min. 8 days
  40. Mysco Inpatient Identification Band (plain)
    Matsuyoshi & Co Mysco Inpatient Identification Band (plain)
    You can freely write on the band with an oil-based magic ballpoint pen according to your needs. It is a hook type and can be easily fastened, and once fastened, it will not come off. Uses a soft material that does not give a feeling of strangeness to the skin.
    Dimension (mm)  25×234  Material  EVA・HPE 
    from S$57.99
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 126

Set Ascending Direction