It is a horizontal master rope with a tensioner (rotating type directly connected to the hook on the end side). The horizontal master rope can be easily installed manually. A main rope for horizontal movement of 16 mmΦ (3-strand) New Tetron rope with large diameter (50 mm) hooks on both ends. Nut... Read More
Color Yellow (with red line) Rope Diameter (Φmm) 16 Tensile Strength (kN) 14 Recycled paper use mark Conformity
A full release stop mechanism is adopted. The length of the woven rope can be arbitrarily adjusted, and a simple winder is used. Can be used in workplaces with a height of 6.75m or less.
Mass (g) About 1190 Type Rewind type Buckle Pass through Hook FS-90 Lanyard, Strap Width (mm) 15 Lanyard, Length (mm) 1500 Type of Shock Absorber First kind Lanyard 1 hook
Mass (g) About 1305 Type Rewind type Method Woven rope Buckle Pass through Hook FS-99, shock absorber Lanyard, Length (mm) 1400 Type of Shock Absorber First kind lanyard width (mm) 15 Lanyard 1 hook
By adopting a hook with a tension indicator, you can easily check if there is a fall. With a disc brake, it cushions the impact. (Approximately 4kN) The structure is such that the upper mounting part rotates and is easy to install. The reserve line cushions the impact even when it is extended to ... Read More
Wire Rope Diameter (Φmm) 4.3 Drop Impact Load (kN) 4.0
Conforms to the standards for fall prevention equipment. The parachute belt adjuster allows you to easily adjust the belt length by simply pulling the belt upwards. It is a comfortable and safe design that distributes the load over the entire pelvis when the fall is stopped. Comes with a lanyard ... Read More
The automatic locking connector "MGO Open 60" with anti-reverse function has a wide opening width, so it is suitable for clipping to metal structures and cables and bars with large diameters. We have adopted a connection point with a gate that can be directly connected to various types... Read More
Mass (g) 490 Breaking strength (kN) Vertical axis: 23, Open gate: 23 Various certifications CE EN 362、EAC
It is a 2-chome retractable recoa lanyard with a first-class shock absorber. The structure side sword is equipped with an all-aluminum hook with a free ring. It is a specification with a pedal hook free ring on the body side.
Workers at heights of 2 m or more.
Type For full harness type Rope Specification Telescopic Type of Shock Absorber Grade 1 Product Type double
It is made tough because it is made to the specifications of the US police and military.
For general high-place work such as construction, civil engineering, shipbuilding, factories, etc.
Equipped with soft belt and shoulder pads. .. It is a high-end model of "Easy Harness Neo" that uses one-touch buckles on both thighs. With a torso belt.
Construction, civil engineering, shipbuilding, bridges, mines, factories, plants
* The body belt is included, but it will be shipped ... Read More
Color Yellow/Black Size S Mass (g) 1210 Type With torso belt Buckle [Thigh buckle] One touch Type of Shock Absorber None Back Type X type Leg Structure V type Thigh Buckle One touch Body Belt Included Lanyard None
It can be used as a fall prevention device for lifting and lowering, and also for fixed position work in high places. Parts other than the wire are shield-designed and are a safe mechanism that keeps foreign matter away. It can be used as a rescue winch by easily changing the lever position.
In c... Read More
Type Type with winch function Opening Diameter (Φmm) (Hook) 20
It is a lanyard for 130 kg
It is a lanyard for the first kind
* Please use with a mass of less than 130 kg
Color Black tape with reflective tape Mass (g) 936 Type For full harness type Lanyard, Length (mm) 1700 Rope Specification Telescopic Product Type Single
A small safety block that prevents a crash while going up and down on a construction site or ladder. As it is a lightweight and compact type, it is convenient to carry, and in the unlikely event of a crash, the lock mechanism stops the fall in the shortest distance.
For construction work, civil e... Read More
Economy type with both ease of use and safety. Can be used in workplaces with a height of 6.75m or less.
Color Blue Size M Mass (g) About 900 Type Rope type Buckle Pass through Hook FS-99 Lanyard, Diameter (mm) 10 Lanyard, Length (mm) 1500 Type of Shock Absorber First kind Lanyard 1 hook
It is a sticker to thoroughly check the hook hook when using the fall prevention equipment. There are stickers that can be attached to both sides of the fall prevention hook and the bottom of the hook as a set on one sheet. It stands out because it is fluorescent.
For checking hook hooks when usi... Read More
Material Fluorescent sticker Color Fluorescent / orange
It is a long size with a connecting belt length of 50 cm. A connecting belt is attached to the D ring on the back of the full harness to make it easy to attach and detach hooks such as safety blocks. When not in use, it can be fixed to the shoulder of the full harness with Velcro.
Hooks such as U... Read More
Material Belt: nylon Mass (g) 95 2018 Trusco page 6 1131
For organizing the work place. You can keep it easy to wear by storing it with a full harness type safety belt. Also supports two-chome hooks. With a small hook to hang a helmet on the top. Comes with a sticker on which you can enter your company name and name. Stacking is possible when storing, ... Read More
With a large diameter (50 mm) hook, it can be hung directly on reinforcing bars or pipes for excellent workability. Polyester spun rope does not harden even when it gets wet, it does not slip easily, and it is easy to handle.
For safety guidance of suspended loads during crane work
* A rope for a... Read More
Specification One side hook, end tape stop Material Hook part: Steel, Rope: Polyester span Cutting load (kN) Approx. 12.2 (Approx. 1250kgf)
The horizontal main rope can be easily installed and released by hand.
Equipment for installing a temporary horizontal main rope during construction of a construction site plant. Since the tension is pulled by hand, the tension of the main rope is about 10 to 20 kg.
* Please tie a knot on the mai... Read More
Material (Rotating part) Stainless steel Suitable Diameter (Φmm) (Lanyard) 16
It is a cheap type with a vertical main rope with a tetron rope. The hook at the tip has a mouth opening of 50 mm and can be hung directly on a single pipe.
78 Rolip / SS A master rope for vertical movement using Rolip. Horizontal master rope using 97HR-3.
* When using horizontally, be sure to us... Read More
Diameter (Φmm) 16 Material (Catch) FS-90 forged hook Material (Rope) Tetoron
It becomes a fall arrest device. This is a product jointly planned with Sanko (Titan Brand), a domestic manufacturer. In the event of a crash, unlike a belt-type fall arrest device, the impact is distributed over the entire body, further reducing damage to the worker. A lanyard with a shock absor... Read More
Color Navy blue Mass (g) About 1800 Type Rope type Hook No.57F Lanyard, Effective Length (mm) 1700 Lanyard, Diameter (mm) 10 Material (Lanyard) Nylon Type of Shock Absorber First kind Back Type X type Leg Structure Parallel type Thigh Buckle Pass through Body Belt None Lanyard 1 hook
It is a fluorescent sticker that is attached to both sides of the hook when using the safety belt to confirm the thorough use of the safety belt and raise awareness of fall prevention.
Included Accessories X2 for hook, x1 for shock absorber
A resin hook for hanging on the belt when the safety belt hook is not used. There are two places, one with a lock that won't fall even if you move it, and the other where you put it when you want to open your hand a little.
Suitable for 50mm wide belt Material Resin Mass (g) 17
It is fastened to the shoulder belt with a hook-and-loop fastener and does not get in the way
Harness accessories
* Fall prevention equipment (safety belt) and fall prevention equipment (safety belt) related equipment are consumables, and their performance will deteriorate due to wear during use,... Read More
February 2019 enforced "standard for fall prevention equipment" compliant product. A constant take-up reel type fall arrest device that pursues ease of use and economy. Since the rope is stored automatically, the rope does not get tangled during work, and work can be done smoothly.
For ... Read More
Type Rewind type Belt Color Navy Function (Emergency lock) None Buckle Pass through Hook Standard (1 lock 51S hook) Lanyard, Length (mm) 1600 Type of Shock Absorber First kind Lanyard 1 hook
Stretchable, lightweight and compact Noviron.
* Auxiliary rope is a rope that is constantly connected to the structure by hanging it on the mounting equipment at the destination before changing the lanyard when moving. It cannot be used as a fall prevention lanyard.
Mass (g) About 520 Method Telescopic strap Hook FS-93-1 (light weight) lanyard width (mm) 32
Mass (g) About 1275 Type Rewind type Method Woven rope Belt Color Blue Buckle Pass through Hook FS-99, shock absorber Lanyard, Length (mm) 1400 Type of Shock Absorber First kind lanyard width (mm) 15 Lanyard 1 hook