Safety Boots
Boots are boots that are highly waterproof and cover your knees, even among safety shoes, safety sneakers, and work shoes. Rubber boots and PVC boots are soft and comfortable to wear, so you can work without getting your feet wet even in deep water. Boots are widely used for food processing and farming, and the lineup is full of boots suitable for factory work, such as oil-resistant type and steel tip. Depending on the type of work, it may be a good choice, as the comfort varies depending on the material.
Other Related Pages
MonotaRO Safety Boots with CoverSafety boots with steel toecap. Since the inner material is made of sweat-absorbent material, it relieves discomfort caused by sweat. * Regarding water absorption and quick-drying, a part of the original fabric is used as our standard, and it is within 8 seconds based on the water absorption JIS ... Read MoreFoot Width 3E Length (cm) About 36.5 (26.0cm) Standard Mass (grams per one foot) About 830 (26.0cm) Type of Shoes Boots Shape High cut Material (Cover) PVC Function Quick drying Material (Sole) Rubber Material (Upper) Rubber Type With cover Material (Toe Protector) Steel Material (Inner Lining) Sweat-ABSorbing knitted fabric- FUJITE (TENGYU) Antibacterial deodorant oil resistant boots FOOT SAVERAntibacterial lining prevents the growth of germs. Improvement of foot stuffiness by introducing sweat-absorbing material. An oil-resistant upper that uses a specially formulated PVC with excellent oil resistance. The oil-resistant bottom drains well and is not slippery.Length (cm) 31(26.0cm) Foot Width 3E Standard Mass (grams per one foot) 575(26.0cm) Type of Shoes Boots Shape High cut Material (Sole) PVC Material (Upper) PVC Color White Type Work shoes
- MonotaRO Short Boots (With Cover)Half boots type boots that are easy to put on and take off. It is comfortable to wear and has a cover on the top to prevent water from entering by tightening the string. Since the inner material is made of sweat-absorbent material, it relieves discomfort caused by sweat. * Regarding water absorpt... Read MoreFoot Width 3E Height (cm) About 22.5 Standard Mass (grams per one foot) Approx. 600 (27.0cm) Type of Shoes Half boots Shape Middle cut Color Navy Material (Cover) Rubber Material (Upper) Rubber Material (Sole) Rubber Material (Inner Lining) Sweat-ABSorbing knitted fabric Type Work shoes
- Workstyle ACE WS3001W Oil resistant safety bootsPVC (made of vinyl chloride) with excellent oil resistance. With antibacterial and deodorant lining. Uses a steel toecap on the toe and comes with a kick that is easy to put on and take off. It supports a wide range of applications from food processing to civil engineering and construction work.Standard Mass (grams per one foot) 910 (26.0) Length (cm) Approx. 38 (26.0) Type of Shoes Boots Shape High cut Material PVC (vinyl chloride) Type Safety boots Color White
- MIDORI ANZEN Safety boots MPB-7700With a hood, it prevents water and dust from entering the inside of the boots. Not only safety and functionality, but also design creates a work scene.Standard Mass (grams per one foot) 1000 Mass (kg) 2 Length (cm) 40 Color Black Grey Type of Shoes Boots Foot Width EEE Shape High cut Type Safety boots Specification With hood
- OTAFUKU GLOVE Oil Resistant Boots JW-707Back up comfortable work. Oil resistant, antibacterial, anti-slip.Length (cm) 31(26.0cm) Foot Width 3E Standard Mass (grams per one foot) Approx. 630 (26.0cm) Type of Shoes Boots Shape High cut Specification Oil resistant, antibacterial, anti-slip Function Oil resistant, antibacterial, anti-slip Material Vinyl chloride Color White Type Work shoes
- FUKUYAMA RUBBER IND Osamu Ogata's powerful work bootsA patent-pending "new era of boots" boots with a 4-layer structure containing reinforced nylon mesh fibers. Sweat-absorbing knitted fabric on the inside for improved comfort. Excellent tear strength! It has excellent durability and is widely used for work and outdoor activities.Foot Width 2E Length (cm) 30.5 Standard Mass (grams per one foot) 620(26.0cm) Type of Shoes Boots Shape High cut Material (Upper) Rubber Function Sweat ABSorption Material (Inner Lining) Sweat absorption knit Type Work shoes
- MIDORI ANZEN Super anti-slip boots high gripA non-slip sole suitable for work on slippery floors such as oil and water. It is processed to prevent the left and right boots from sticking to each other, which can cause falls. It is antibacterial processing.Material (Body / Bottom) Vinyl chloride (PVC) Dynamic friction coefficient 0.20 or more Length (cm) 29.8 Standard Mass (grams per one foot) 700(25.5cm) Type of Shoes Boots Foot Width EEE Shape High cut Type Work shoes
- KOHSHIN RUBBER Non-slip, Antibacterial, Oil Resistant, Sanitary Boots ZONA G5Anti-slip sole for slippery work environments that handle water and oil. Demonstrates about twice the grip of general hygiene. (Compared to the manufacturer) The wide tread expands the ground contact area for stability and excellent grip when grounded. The block design edge breaks and eliminates ... Read MoreType of Shoes Boots Shape High cut Type Work shoes
- MIDORI ANZEN Safety Boots (Short Type) MPB-185The short length makes it easy to move. Not only safety and functionality, but also design creates a work scene.Standard Mass (grams per one foot) 750(L) Color Blue / grey Foot Width EEE Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steel Material (Sole) Synthetic rubber Material (Upper) Synthetic rubber Specification With hood
- XEBEC Short length safety boots 85711The short length makes it easy to wear and move. The deeply carved rubber sole makes it hard to slip and is safe. Hard and light steel toecap. By using a sweat-absorbing dry fabric for the inner, stuffiness in the shoes is reduced. With a thick body design that can be worn comfortably, it is also... Read MoreMass (g / leg) 1640(M) Foot Width 3E Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steel Material (Inner Lining) Sweat-absorbent dry fabric Material (Sole) Synthetic rubber Material (Upper) Synthetic rubber (no gloss)
- MIDORI ANZEN Safety boots MPB-200Safety boots with steel toecap. The surface is a matte type.Height (cm) 34 Foot Width 3E Type of Shoes Boots Shape High cut Type Safety bootsfrom S$55.99Min. 2 days
- XEBEC Safety winter boots 85710Urethane foam on the backing cloth completely wraps to ensure heat retention. The deeply carved rubber specifications make it non-slip and safe. Hard and light steel toecap. Supports a wide range of sites, from winter factory sites to agricultural work. It is designed to be thicker than the conve... Read MoreMass (g / leg) 1960(M) Foot Width 3E Type of Shoes Boots Shape High cut Type Safety shoes Material (Toe Protector) Steel Material (Sole) Synthetic rubber Material (Upper) Synthetic rubber (no gloss) Material (Inner Lining) Urethane (6mm)
- MIDORI ANZEN Oil and chemical safety boots Work Ace NW1000 SuperIt has excellent chemical resistance to low-concentration acids and alkalis, and oil resistance to fuel oils such as gasoline and light oil, and animal and vegetable oils. Equipped with a wide and lightweight wide resin toecap. Compared to iron, the toes do not get cold easily and there is no nee... Read MoreLength (cm) 35 Foot Width 4E Type of Shoes Boots Shape High cut Type Safety boots
- J-WORK'S PLANNING PVC boots JKP-819Integrally molded and durable PVC boots General work boots * Wearing shoes that do not fit your feet may damage your foot health and cause scratches. Please choose the right shoes. Also, if you experience a distorted or rash due to sweating, etc., discontinue use immediately. Never place it near ... Read MoreColor Black Type of Shoes Boots Shape High cut Instep Type Slip-on type Material (Upper) Vinyl chloride resin Material (Sole) Vinyl chloride resin Type Work shoes
- FUKUYAMA RUBBER IND G Rex 3 BlackShort length and lightweight. The torso has a 4-layer structure that makes it difficult to tear. Civil engineering and general water workMass (kg) 1 Load Capacity (kN) 10 Foot Width 3E Color Black Type of Shoes Half boots Function Lightweight Material (Toe Protector) Made of steel Shape Middle cut Material Rubber Type Safety shoes Material (Inner Lining) Sweat absorption knit
- FUKUYAMA RUBBER IND Work boots Spike Joy 2A stainless steel pin that is hard to rust, bend, and come off. The torso has a 4-layer structure that makes it difficult to tear. Civil engineering, forestry, slope work.Length (cm) 37.0 Foot Width 3E Standard Mass (grams per one foot) Approximately 800 (L size) Type of Shoes Boots Color Dark green Shape High cut Type Work shoes
- FUJITE (TENGYU) Safety rubber bootsWith JIS S class equivalent iron toecap. Cylinder specification. With reflective tape. With side logo.Length (cm) 37(26cm) Foot Width 3E Standard Mass (grams per one foot) 970(26cm) Material (Sole) American rubber Type of Shoes Boots Color Green Shape High cut Standard JIS S class equivalent Material (Upper) Rubber Type Safety shoes Material (Toe Protector) Steel
- SUNDANCE Waterproof shoes CRS-001For both sunny and rainy days! Easy to put on and take off and is outstandingly light! Neoprene, which is also used for wet suits, is used for the mouth. It is easy to put on and take off, and it feels like it is wrapped up. Also, it is lighter than boots, so you can feel free to wear it. Excelle... Read MoreType of Shoes Sandals Material (Sole) Synthetic rubber Material (Upper) Synthetic rubber + neoprene
- MIDORI ANZEN Safety Boots Nw1000 Blue ElectrostaticIt releases static electricity charged on the human body from the sole of the shoe to the floor and prevents the generation of sparks. It has chemical resistance to low-concentration acids and alkalis, and oil resistance to gasoline and light oil. Equipped with a lightweight wide resin toecap. Eq... Read MoreType of Shoes Boots Function Electrostaticfrom S$169.90Min. 2 days
- MARUGO Magical spike # 900Type of Shoes Boots RoHS directive (corresponding to 10 substances) Correspondence Shape High cut Color Orange Material (Sole) Rubber Material (Upper) Rubber, nylon Type With spike pin Material (Toe Protector) Steel
- OTAFUKU GLOVE Safety oil resistant boots whiteUses a steel toecap. Made of vinyl chloride with excellent oil resistance from the upper to the bottom. It is durable and durable. Civil engineering and constructionStandard Mass (grams per one foot) 1135(26.5cm) Foot Width 3E Type of Shoes Boots Shape High cut Material (Inner Lining) Nylon Type Safety shoes Material (Toe Protector) Steel Material (Upper) Vinyl chloride Material (Sole) Vinyl chloride Color White
- Kajimeiku Air rubber boots MLightweight, soft, and highly flexible, it is easy to move and does not get tired even when working for a long time. High wear resistance and excellent grip. Since it uses foam rubber, it has a sticky fit. Ideal for various light work such as farm work, gardening, and outdoor activities.Type of Shoes Boots Shape High cut Function Lightweight, flexible, wear-resistant Type Work shoesfrom S$53.99Min. 2 days
- XEBEC Safety Boots20% lighter than before !! Sweat-absorbent dry fabric is used on the back side to reduce the crowd in the shoes. Comes with a cuff cover to prevent water, snow and foreign matter from entering. With reflective material, night work is safe and secure. With a 5mm thick EVA insole, it absorbs shocks... Read MoreMass (g) 1580 (both legs L) Type of Shoes Boots With EEE Shape High cut Material (Toe Protector) Resin Shoe Sole Rubber Material (Upper) Rubber Type Safety boots Material (Inner Lining) Sweat-absorbent dry fabric Manufacturing Method Vulcanization process
- Daido(Daido Sekiyu) New Mighty Boots 2NSNew Mighty Boots II NS uses the cut-resistant, high-strength fiber Technora (R) developed by Teijin Products Ltd. It demonstrates excellent functionality as a special protective material that protects you from cuts in harsh working environments. Aramid fiber technora is used between the inner hea... Read MoreHeight (cm) 30, (Food part) 8 Standard Mass (grams per one foot) About 990 Color Blue Type of Shoes Boots Shape High cut Type Work shoesfrom S$439.90Min. 2 days
- Achilles Oil and hygiene boots work master moss green oakThe length can be adjusted simply by cutting with scissors. Demonstrates excellent chemical resistance and oil resistance. It is a product that won the Good Design Award selected by the Ministry of International Trade and Industry. For a variety of oil refineries, essential oils, and commercial oilsType of Shoes Boots Foot Width EE Shape High cut Specification High oil resistance Color Moss green Function Oil resistant Material Vinyl chloride (PVC) Type Work shoesfrom S$87.99Min. 2 days
- KOHSHIN RUBBER Glossy Long Safety Bootsmade in Japan. Soft and easy to wear. Antibacterial combination. Oil resistance Fisheries, food factories, food processing plants, etc.Type of Shoes Boots Shape High cut Type Work shoes Color yellowfrom S$55.99Min. 2 days
- Simon Boots Urethane bootsA unique cleat that provides excellent grip on uneven surfaces and wet floors. The flexible sole reduces the impact on the heel and reduces the burden on the legs.Operating temperature -30℃～+100℃ Height (cm) 37.5(26cm) Length (cm) 37.5(26cm) Foot Width 3E Standard Mass (grams per one foot) 925 Type Safety shoes Type of Shoes Boots Specification Built-in stepping plate, antistatic Standard EN ISO 20345 2004 S5 (European standard) Shape High cut Upper Polyurethane foam Sole Polyurethane foam Material (Toe Protector) Steel Toe Protection Steel tip Color khaki
- Nisshin Rubber Hyper V # 4200 Hooded hygiene bootsSanitary boots with cover equipped with Hyper V sole with excellent oil resistance and slip resistance. It has high anti-slip performance and is effective when working in slippery places such as water and oil! A model that pursues work safety and comfort that is optimal for kitchens and food proc... Read MoreFoot Width 3E Type of Shoes Boots Shape High cut Function Hyper V sole (slip and oil resistant) Material (Sole) Rubber bottom Material (Upper) Vinyl chloride, synthetic leather Color White Type Work shoesfrom S$67.99Min. 7 days
- KOHSHIN RUBBER Safety bootsSafety boots with sole guard. Comes with a step-through prevention version (step-through resistance 1100N) The backing cloth is made of sweat-absorbing material to reduce discomfort. Uses steel toecap (equivalent to JIS standard S class) with reflective tape for night use) Ideal for construction ... Read MoreStep-through resistance (N (kgf)) 1100 Outside dimensions (cm) 32 (+ cover 6) Standard Mass (grams per one foot) About 980 (26cm) Color Black Type of Shoes Boots Finish Gloss Shape High cut Type Safety shoes Material (Toe Protector) Steel (S class equivalent) Material (insole) Sweat absorption flat Material Sweat lining clothfrom S$74.99Min. 2 days
- MIDORI ANZEN Safety boots MPB-5000NWith a hood, it keeps water and dust out of the boots. Not only safety and functionality, but also design creates a work scene. Civil engineering, construction work, etc.Length (cm) 37 Type of Shoes Boots Foot Width EEE Color Green Shape High cut Type Safety boots Specification With hoodfrom S$58.99Min. 2 days
- SHIBATA INDUSTRIAL Winter safety boots Safety bear # 1011 No white bear hoodBy adopting the new quilting "BLAXX", the heat retention has been improved compared to the past. Antibacterial and deodorant functions have also been added. It has shock absorption energy absorption E of the heel part. Anti-slip performance is improved by about 40% compared to our conve... Read More2018 Trusco page 6 1003 Material Body / Bottom: Natural rubber Type of Shoes Boots Shape High cut Type Safety bootsfrom S$259.90Min. 32 days
- SHIBATA INDUSTRIAL Safety oil resistant bootsOil-resistant and safe boots with all-nitrile rubber. Safe work in the workplace where oil is generated. Safety work and construction civil engineering work that requires water resistance such as factories and construction.Compression Load (kN) 10 Length (cm) 30 Color Black Foot Width EEE JIS Standard JIS T 8101 L passed Standard Shock resistance 70Jfrom S$229.90Min. 3 days
- TAKADA SHOJI Highfield safety ankle bootsSafety short boots with an iron core equivalent to JIS S class. For all kinds of work such as transportation in rainy weather, warehousing distribution, civil engineering, construction, ironwork, agriculture, forestry, etc. * Be careful not to slip when using in a place wet with oil or water or i... Read MoreFoot Width EEE Color Gray / black Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steelfrom S$55.99Min. 6 days
- ESCO 28.0cm boots (safety)Built-in stepping prevention plate. antistatic. Has excellent slip resistance and oil resistance. Achieves supple comfort without becoming hard even at -30 ° C.Standard Mass (grams per one foot) 1850(26cm) Size (cm) 28 Foot Width 3E Type of Shoes Boots Esco Part No. EA910LT-28 Standard EN ISO 20345 2004 S5 (European standard) Shape High cut Material (Sole) One layer of polyurethane foam Material (Upper) Polyurethane foam Type Safety shoes Toe Protection With steel tipfrom S$269.90Min. 6 days
- MonotaRO Safety Boots with Cover to Prevent SteppingBoots with toe box equipped with a plate on the sole to prevent treading. Since it has a cover, it prevents mud and sand from entering from above. The inner material is made of a material that absorbs sweat, so it relieves discomfort caused by sweat. The heel has a kicker that makes it easy to ta... Read MoreFoot Width 3E Length (cm) About 36.5 (26cm) Standard Mass (grams per one foot) About 960 (26cm) Shape High cut Material (Cover) PVC Material (Sole) Rubber Material (Upper) Rubber Type With step-out prevention plate / cover Material (Toe Protector) Steel Material (Inner Lining) Sweat-ABSorbing knitted fabric
- MARUGO Safety Proharks # 870Uses a specially formulated PVC with excellent oil resistance. It has a bottom design that drains well and does not slip easily. Antibacterial processing prevents the growth of germs. The sweat-absorbing material has improved foot stuffiness.Standard Mass (grams per one foot) 1040(26cm) Length (cm) 38.5(26cm) Foot Width 3E Color Black Type of Shoes Boots RoHS directive (corresponding to 10 substances) Correspondence Shape High cut Material (Toe Protector) Made of steel Specification Oil-resistant bottom Material (Upper) PVC Material (Sole) PVC Type Safety shoes
- KOHSHIN RUBBER Zona G3 oil resistantHACCP compliant kitchen boots. Now that the trend of emphasizing hygiene management is increasing, it is necessary boots. It has been reported that the pathogenic Escherichia coli O-157 and the Escherichia coli IFO3972 used by the manufacturer in the test have the same effect as the antibacterial... Read MoreType of Shoes Boots Shape High cut Type Work shoes
- TULTEX Safety rubber boots AZ-4702Sweat-absorbent dry lining, with steel toecap, with reflective tape.Foot Width 3E Standard Mass (grams per one foot) 940 Length (cm) Approx. 38 (26cm) Type of Shoes Boots Shape High cut Color Navy x yellow Material (Upper) Rubber Material (Sole) Rubber Type Safety shoes Material (Toe Protector) Steel Function Sweat ABSorption
- TULTEX Safety Boots with Toe Cap, with Stepping Prevention AZ-58601The rubber quality is strong elasticity. With a stepping resistance plate. Contains an iron core equivalent to JIS L class.Foot Width 3E Length (cm) 40 (boots 31cm + cover 9cm) Height (cm) 40 (boots 31cm + cover 9cm) Standard Mass (grams per one foot) Approx. 900 (26.0cm) Color Black Type of Shoes Boots Shape High cut Standard JIS L class equivalent Material (Back) Knitting Material (Upper) Rubber Type Safety shoes Material (Toe Protector) Steel Function Stepping prevention Material (Sole) Synthetic rubber
Filter by categories
