All Category

Cut Resistant Gloves

Cut-resistant gloves are gloves that protect your hands to prevent accidents that cause you to cut your hands when working with sharp tools such as construction sites, factories, and glass processing. There are cut-resistant levels, and gloves that are appropriate for the risk of work are used. There are many products that combine not only anti-slip but also non-slip and oil-resistant ones, so choose the one that best suits your work. The thin one can also be used as an inner work glove.
View : Grid List
Filter

Items 1 - 40 of 837

Set Ascending Direction
  1. Cut-Resistant Gloves with Non-Slip Nitrile Coating
    MonotaRO Cut-Resistant Gloves with Non-Slip Nitrile Coating
    Gloves with excellent cut resistance using high-strength polyethylene thread. It has excellent oil resistance and wear resistance. Since the palm is coated with nitrile, it has a non-slip effect. It is an economical glove that can be reused because it has excellent washability. With 13 gauge, the... Read More
    Quantity per Package (Pair)  Gauge No.  13 
    Rating:
    89%
    from S$9.69
    Min. 2 days
  2. WORKS HOMME Safety Gloves Nitrile
    UNI WORLD WORKS HOMME Safety Gloves Nitrile
    Cut-resistant gloves that use ultra-high-strength polyethylene thread for excellent comfort and softness. The palm is double coated with nitrile rubber. Has excellent oil resistance and wear resistance. The surface has a premium finish (special non-slip), so it has excellent grip performance. It ... Read More
    Quantity per Package (Pair)  Gauge No.  13  Function  Cut and oil resistant  Cut Resistance  EU cut level 3 
    Rating:
    82%
    from S$14.99
    Min. 2 days
  3. BEST GRIP Hyper Guard Deluxe
    HANVO BEST GRIP Hyper Guard Deluxe
    Gloves with excellent cut resistance using high-strength polyethylene thread. Obtained cut resistance level 5 in the EN388 test. Since the palm is coated with polyurethane, it has an anti-slip effect. With 13 gauge, the stitches are fine, and there is less fluffing and dust generation. Thin glass... Read More
    Quantity per Package (Pair)  RoHS directive (corresponding to 10 substances)  Gauge No.  13  Cut Resistance  Color  Black and white  Function  Cut wound resistance and breathability 
    from S$16.99
    Min. 2 days
  4. EOS NOCUT VV910 / cut resistant + puncture resistant gloves
    Delta Plus EOS NOCUT VV910 / cut resistant + puncture resistant gloves
    Adds piercing resistance to the high cut resistance of EU cut level 5. High-density polyethylene fiber with high cut resistance and high grip with 2-layer nitrile coating. Reinforced with TPR rubber, it has puncture resistance and is effective in protecting the metacarpal bones. It is also highly... Read More
    Quantity per Package (Pair)  Palm Width (cm)  11  Overall Length (cm)  26  Middle Finger Length (cm)  8.5  Function  Cut and puncture resistance  Cut Resistance  EU cut level 5 / D  Color  Gray x yellow  Size 
    Rating:
    20%
    from S$59.99
    Min. 2 days
  5. Cut-resistant gloves high flex 724
    Ansell Cut-resistant gloves high flex 724
    It uses INTERCEPT cut resistance technology, which is a blend of processed fibers, synthetic fibers, and natural fibers to achieve comfort and cut resistance. The polyurethane immersion coating on the palm provides grip even in environments where light oil adheres. It is a coating color that make... Read More
    Quantity per Package (Pair)  Gauge No.  13  Thickness (mm)  About 1.34  Color  White / black 
    from S$16.99
    Min. 2 days
  6. DURACoil 546W (Duracoil 546W)
    SHOWA GLOVE DURACoil 546W (Duracoil 546W)
    Ease of use, a masterpiece. Strength, wonder. Unique fiber technology "Duracoil" with soft and breathable polyurethane foam coating & strength and softness
    Quantity per Package (Pair)  RoHS directive (corresponding to 10 substances)  Gauge No.  13  Cut Resistance  Level 4  Color  White 
    from S$18.99
    Min. 2 days
  7. Cut-resistant Gloves Duracoil Polyurethane Backless Type 546
    SHOWA GLOVE Cut-resistant Gloves Duracoil Polyurethane Backless Type 546
    We have adopted a unique fiber "DURACoil" that combines glass fiber yarn and high-strength polyethylene yarn. The unique textile technology DURACoil technology realizes cut resistance, softness, and high workability. Since the palm is coated with polyurethane foam, it has a high anti-sl... Read More
    RoHS directive (corresponding to 10 substances)  Color  Gray 
    from S$16.99
    Min. 2 days
  8. Level 6 series 9011
    HEXARMOR Level 6 series 9011
    A comfortable cotton blend fabric is applied to the surface, and a rubber crepe coating is applied to the palm part for operability and usability. Innovative puncture resistance of the reinforced parts keeps out wires, metal, wood and glass. SuperFabric [[(R)]] material is used for the inner to a... Read More
    Specification  (ISEA CUT)5  Quantity per Package (Pair)  Cut Resistance  Level 5 (EN388)  Color  Red / black 
    from S$77.99
    Min. 2 days
  9. Children Safety Gloves
    Asmix Children Safety Gloves
    A glove for children who are hard to cut with a knife. It is about 3 times harder to cut than general cotton gloves. Uses HPPE / high-performance polyethylene and has cut resistance of 12.7N (JIST8052). Excellent elasticity and excellent fit. It can also be used when using a cutter saw sword duri... Read More
    Quantity per Package (Pair)  Cut Resistance  12.7N(JIST8052)  Overall Length (cm)  About 16  Palm Width (cm)  About 8  Size  Free  Type  Left and right combined use 
    Rating:
    100%
    from S$9.69
    Min. 2 days
  10. 10G GLOVE100
    ATOM 10G GLOVE100
    Standard type with an emphasis on fit Transportation work that requires cut resistance, waste treatment, steel work, machining, agriculture and fisheries, etc.
    Quantity per Package (Pair)  Thickness (mm)  1.2  Gauge No.  10  Cut Resistance  Cut resistance level C  Function  Cut resistant wound  Standard  EN388: 2016 standard  Mix Rate (%)  Gevlar (R) spun yarn 100  Color  yellow  Material  ・ Kevlar spun yarn 
    from S$9.69
    Min. 2 days
  11. (L) Gloves (Cut Resistant / Vinyl Chloride, Back Kevlar, PE)
    ESCO (L) Gloves (Cut Resistant / Vinyl Chloride, Back Kevlar, PE)
    Cut-resistant all-coated gloves made of aramid fiber and coated entirely with vinyl chloride. For preventing cut accidents when handling sharp objects such as when processing metal. Used for Kevlar glove inners with high cut resistance. It is coated with a specially formulated vinyl chloride with... Read More
    Gauge No.  10 (Kevlar part)  Palm Circumference (cm)  23.5  Mass (g)  230  Overall Length (cm)  30  Esco Part No.  EA354GJ-52  Size 
    from S$19.99
    Min. 2 days
  12. CYGUS Gloves Light Type
    Oshizawa CYGUS Gloves Light Type
    Cut resistant gloves using the new material CYGUS. Since CYGUS has more than double the cut resistance capacity of aramid type and high molecular weight polyethylene type, this product has achieved EN388 cut resistance level 4 even though it is thin enough to be transparent. The EN388 tear streng... Read More
    RoHS directive (corresponding to 10 substances)  Quantity per Package (Pair)  Color  Black  Cut Resistance  Level 4 (EN388)  Size  M / L combined use 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  13. Cut-resistant gloves Duracoil Nitrile knuckle coat type 576
    SHOWA GLOVE Cut-resistant gloves Duracoil Nitrile knuckle coat type 576
    We have adopted a unique fiber "DURACoil" that combines glass fiber yarn and high-strength polyethylene yarn. The unique textile technology DURACoil technology realizes cut resistance, softness, and high workability. Since it is coated with nitrile rubber, it is resistant to oil and has... Read More
    RoHS directive (corresponding to 10 substances)  Quantity per Package (Pair)  Color  Gray  Cut Resistance  Level X 
    from S$25.99
    Min. 2 days
  14. No540 Chemister Palm
    SHOWA GLOVE No540 Chemister Palm
    Quantity per Package (Pair)  Thickness (mm)  1.1  Palm Circumference (cm)  17.5  Overall Length (cm)  21.5  Mass (g)  36  Trusco Part No.  434-3212  Middle Finger Length (cm)  7.2  Size  Color  White 
    from S$21.99
    Min. 2 days
  15. Inner Gloves (for Cutting Prevention)
    AS ONE Inner Gloves (for Cutting Prevention)
    High gauge seamless gloves using super aramid fiber. Can be washed and used repeatedly.
    Quantity per Package (Pair)  10  Function  Cut resistant wound  Material  Table / aramid fiber, back / nylon 
    from S$189.90
    Min. 3 days
  16. 13G Tunooga NBR
    ATOM 13G Tunooga NBR
    Coated with nitrile rubber, which has excellent oil resistance and wear resistance. Protect your hands from cut accidents with the highest cut level. Metal processing, automobile maintenance, electrical wiring, assembly work, etc.
    Quantity per Package (Pair)  Gauge No.  13  Cut Resistance  Cut resistance level C  Function  Cut resistant wound  Standard  EN388: 2016 standard  Specification  Low dust generation  Material (Slip Prevention)  Nitrile rubber  Color  White 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  17. Niroflex 2000 Mesh Gloves
    Niroflex Niroflex 2000 Mesh Gloves
    Stainless mesh gloves that help prevent injuries to cutlery Niroflex's stainless mesh products are used as excellent armor all over the world. The most hygienic gloves made of 100% stainless steel. Machine washing, hot water sterilization, and hypochlorous acid sterilization are possible.
    from S$389.90
    Min. 3 days
  18. Level 6 series 9010
    HEXARMOR Level 6 series 9010
    The surface is made of high-performance polyethylene that provides cut resistance, and the palm is coated with nitrile to provide grip. SuperFabric [[(R)]] material is used for the inner to achieve the highest cut resistance on the market. -Transcends ISEA / CE level 5 (enhanced protection) Innov... Read More
    Specification  (ISEA CUT)5  Quantity per Package (Pair)  Color  Gray / black  Cut Resistance  Level 5 (EN388) 
    from S$119.90
    Min. 3 days
  19. 4041NSR S
    HEXARMOR 4041NSR S
    The 3-layer Super Fabric [[(R)]] is used on the palm to maximize needle resistance. The back side of the hand is made of highly elastic spandex fabric to improve the fit. Velcro is placed on the wrist to prevent the gloves from slipping. Security work, medical care, long-term care, research, work... Read More
    Quantity per Package (Pair)  Mass (g)  175  Overall Length (cm)  19.6  Palm Circumference (cm)  19.8  Trusco Part No.  780-9662  Middle Finger Length (cm)  8.2  Color  Black  Cut Resistance  Level 5 (EN388)  Size  Material  SuperFabric [[(R)]], spandex 
    from S$329.90
    Min. 32 days
  20. Cut-resistant gloves MK-50CL (film processing)
    MIDORI ANZEN Cut-resistant gloves MK-50CL (film processing)
    Fire protection gloves for fire fighting and rangers. Electronic component processing assembly, print board assembly, glass, film processing, etc. * Cut resistance level 3 is the palm part. * This product is hard to cut, not a product that never cuts. * Please check the safety and compatibility o... Read More
    Quantity per Package (Pair)  Thickness (mm)  1.7  Palm Circumference (cm)  19.0  Overall Length (cm)  23.0  Cut Resistance  Mass (g)  30  Middle Finger Length (cm)  8.8  Trusco Part No.  819-2504  Material (Inner Lining)  Cotton knit  Size  Color  Yellow / white 
    from S$67.99
    Min. 32 days
  21. Cut resistant gloves with silicone anti-slip KPC-60
    TOWA CORPORATION Cut resistant gloves with silicone anti-slip KPC-60
    Quantity per Package (Pair)  10  Overall Length (cm)  23.5  Middle Finger Length (cm)  Palm Width (cm)  9.5  Function  Cut resistant wound  Size  Free  Material  Kevlar knit  Color  yellow 
    from S$1,899.00
    Min. 9 days
  22. Cut-resistant Gloves with Non-slip Polyurethane Coating
    MonotaRO Cut-resistant Gloves with Non-slip Polyurethane Coating
    Gloves with excellent cut resistance using high-strength polyethylene thread. Since the palm is coated with polyurethane, it has a non-slip effect. It is an economical glove that can be reused because it has excellent washability. With 13 gauge, the stitches are fine, and there is less fluffing a... Read More
    Quantity per Package (Pair)  Gauge No.  13 
    Rating:
    89%
    from S$11.99
    Min. 2 days
  23. Cut-Resistant Gloves Thin
    MonotaRO Cut-Resistant Gloves Thin
    Kevlar (R) spun yarn is a yarn made by aligning and twisting Kevlar (R) short fibers. (Kevlar (R) is a registered trademark of DuPont in the United States.) A thin 10 gauge type that can be used as an inner layer. Transportation work that requires cut resistance, waste treatment, steel work, mach... Read More
    Quantity per Package (Pair)  Gauge No.  10  Number of Threads  Function  Cut resistant wound  Cut Resistance  EN388: 2016 Cut Level 3/B  Material  ケブラー® 
    Rating:
    75%
    from S$7.99
    Min. 2 days
  24. Cut-resistant gloves with stainless steel wire + aramid S-TEX581
    SHOWA GLOVE Cut-resistant gloves with stainless steel wire + aramid S-TEX581
    Uses stainless wire thread and aramid fiber (Kevlar (R)). Demonstrates a high anti-slip effect due to the foamed resin coating and the unique press processing "S-Press Finish (R)". Since the palm is coated with nitrile rubber, it is resistant to oil and has excellent wear strength. The ... Read More
    RoHS directive (corresponding to 10 substances)  Quantity per Package (Pair)  Color  Black  Cut Resistance  EN388 standard level 5 
    Rating:
    93%
    from S$25.99
    Min. 2 days
  25. Cut Resistant Gloves
    MonotaRO Cut Resistant Gloves
    Kevlar (R) spun yarn is a yarn made by aligning and twisting Kevlar (R) short fibers. (Kevlar (R) is a registered trademark of DuPont.) The most standard type with good wearing comfort, texture and feel. Transportation work that requires cut resistance, waste treatment, steel work, machining, agr... Read More
    Quantity per Package (Pair)  Number of Threads  Gauge No.  Function  Cut resistant wound  Cut Resistance  EN388: 2016 Cut Level 4 / C  Material  ケブラー® 
    Rating:
    77%
    from S$9.49
    Min. 2 days
  26. Cut-resistant Gloves with Non-slip Thin
    MonotaRO Cut-resistant Gloves with Non-slip Thin
    It uses Kevlar (R) spun yarn, which is hard to cut and burn, and has a non-slip PVC palm, so it has excellent workability. (Kevlar (R) is a registered trademark of DuPont in the United States.) In addition, the 10-gauge thin type makes these gloves light and strong against cuts. Automobile relate... Read More
    Quantity per Package (Pair)  Gauge No.  10  Number of Threads  Function  Cut resistant wound  Material (Slip Prevention)  Vinyl chloride  Material  ケブラー® 
    Rating:
    85%
    from S$8.39
    Min. 2 days
  27. Cut-Resistant Gloves Cut Guard 130
    MIDORI ANZEN Cut-Resistant Gloves Cut Guard 130
    Polyurethane coating has a non-slip effect. Can be washed and used repeatedly. Low dust generation due to the use of long fibers. The hem is overlocked to prevent it from fraying. Automotive related. Glass related. Equipment maintenance Waste disposal Meat dismantling * High-strength polyethylene... Read More
    Quantity per Package (Pair)  Thickness (mm)  1.1  Gauge No.  13  Function  Cut resistant wound  Cut Resistance  Level 3 (EN388)  Material (Slip Prevention)  Polyurethane 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  28. Chemister Wire Fit 521
    SHOWA GLOVE Chemister Wire Fit 521
    Cut resistant gloves using stainless wire thread and aramid fiber. The product is designed with flexibility in mind and has excellent workability. The unique knitting technology "Hagane Coil" eliminates the tingling and stiffening of the wire. Unique 10-gauge seamless knit gloves with f... Read More
    RoHS directive (corresponding to 10 substances)  Quantity per Package (Pair)  Gauge No.  10  Function  Cut resistant wound  Cut Resistance  EU cut level 5  Standard  EU standard CE EN388 
    Rating:
    97%
    from S$25.99
    Min. 2 days
  29. Chemister Wire Fit Plus
    SHOWA GLOVE Chemister Wire Fit Plus
    High cut resistance is achieved by combining stainless wire thread and aramid fiber (Kevlar). It is thin, soft and fits your hand, so it can also be used as an inner. Can be washed and used repeatedly. The cut resistance level does not change even after washing. Since it uses long fibers, it supp... Read More
    Quantity per Package (Pair)  RoHS directive (corresponding to 10 substances)  Gauge No.  10  Color  Blue  Function  Cut resistant, durable 
    Rating:
    96%
    from S$25.99
    Min. 2 days
  30. VERTIGO GREY PU B
    Honeywell VERTIGO GREY PU B
    It has low bleeding and greatly suppresses fluffing. Steel, automobiles, aviation, construction, energy, electricity, glass processing, logistics, metals
    Gauge No.  13  Overall Length (cm)  23.5  Cut Resistance  Color  White 
    Rating:
    90%
    from S$21.99
    Min. 2 days
  31. Cut-Resistant Gloves Edge 48-705
    Ansell Cut-Resistant Gloves Edge 48-705
    It has a high level of protection against wear, cuts, tears and punctures, increasing work safety. The urethane coating makes it resistant to oil. It has excellent flexibility and ease of fingertip movement. Manufacture of aircraft, automobiles and other machinery. Metal processing. Resin molding.
    Thickness (mm)  Quantity per Package (Pair)  Puncture resistance  Tear resistance  Abrasion resistance  Cut Resistance  2018 Trusco page  6 0807  Standard  EN388  Material  Fiber part: Spandex nylon + glass fiber  Color  Gray  Material (Slip Prevention)  Polyurethane 
    Rating:
    73%
    from S$15.99
    Min. 2 days
  32. Cut-resistant gloves cut guard G150
    MIDORI ANZEN Cut-resistant gloves cut guard G150
    The hem is overlocked to prevent fraying, and long fibers are used for low dust generation. Cut resistance is improved by using glass fiber. Automotive related, equipment maintenance * High-strength polyethylene is generally superior in light resistance, chemical resistance, and water resistance ... Read More
    Quantity per Package (Pair)  Thickness (mm)  1.0  Gauge No.  15 gauge  Cut Resistance  Color  Gray 
    from S$21.99
    Min. 2 days
  33. Cut-Resistant Gloves Duracoil Foamed Nitrile Rubber Backless Type 386
    SHOWA GLOVE Cut-Resistant Gloves Duracoil Foamed Nitrile Rubber Backless Type 386
    We have adopted a unique fiber "DURACoil" that combines glass fiber yarn and high-strength polyethylene yarn. The unique textile technology DURACoil technology realizes cut resistance, softness, and high workability. Demonstrates a high anti-slip effect due to the foamed resin coating a... Read More
    Quantity per Package (Pair)  RoHS directive (corresponding to 10 substances)  Color  Gray  Cut Resistance  Level X 
    Rating:
    60%
    from S$19.99
    Min. 2 days
  34. Stainless steel wire cut resistant gloves S-TEX300
    SHOWA GLOVE Stainless steel wire cut resistant gloves S-TEX300
    Cleaning / service industry, transportation / logistics industry, machine industry, automobile-related industry, civil engineering / construction industry, cardboard processing industry
    Quantity per Package (Pair)  RoHS directive (corresponding to 10 substances)  Color  Black  Cut Resistance  EN388:2003・・・4、EN388:2016・・・D 
    Rating:
    95%
    from S$21.99
    Min. 2 days
  35. Aramid fiber (short) x artificial leather KE303
    YUASA GLOVE (TONBORESQUE) Aramid fiber (short) x artificial leather KE303
    Ideal for cut-resistant gloves that you usually wear.
    Quantity per Package (Pair)  Cut Resistance  Cut level 3 (EC standard EN388)  Function  Cut resistant wound 
    Rating:
    98%
    from S$64.99
    Min. 2 days
  36. Neocut PU
    Honeywell Neocut PU
    Thin type inner gloves that use 67% of cupra (Bemberg [[R top]]) that has hygroscopicity and moisture release properties and does not easily generate static electricity. Sheet handling Machining Assembly work
    Quantity per Package (Pair)  Gauge No.  13  Cut Resistance  Level 5 
    Rating:
    90%
    from S$11.99
    Min. 2 days
  37. 710 Non-cut Tebukuro for cutting
    PROFIST21 (OJI RUBBER) 710 Non-cut Tebukuro for cutting
    For cuts that have cleared the European standard of cut level 5, knitted gloves mainly made of long fibers of high-strength polyethylene are coated with urethane resin, so they have excellent cut resistance, good breathability, and long working hours. Comfortable knitting Since long fibers are us... Read More
    Quantity per Package (Pair)  Gauge No.  13  Cut Resistance  Cut level 5 
    Rating:
    93%
    from S$16.99
    Min. 2 days
  38. Cut Resistant Gloves MK-100
    MIDORI ANZEN Cut Resistant Gloves MK-100
    It has cut resistance, high strength, and excellent heat resistance. We use materials that are 5 to 10 times stronger than normal work gloves. Automotive related, metal processing work, civil engineering / construction work, cleaning work, solar cell industry.
    Quantity per Package (Pair)  Palm Circumference (cm)  20  Overall Length (cm)  24  Thickness (mm)  3.38  Trusco Part No.  335-7074  Mass (g)  58  Gauge No.  Middle Finger Length (cm)  8.5  Cut Resistance  EU cut level 4  Size  Free  Material  Front and back: Kevlar yarn (DuPont)  Function  Heat and cut resistant 
    Rating:
    80%
    from S$16.99
    Min. 2 days
  39. Cut-Resistant Gloves Duracoil Uncoated Type 546X
    SHOWA GLOVE Cut-Resistant Gloves Duracoil Uncoated Type 546X
    We use a unique fiber "DURACoil" that combines glass fiber threads and high-strength polyethylene threads. Our unique fiber technology, DURACoil technology, achieves cut resistance, good texture, and high workability. Can also be used as inner gloves. It can be used repeatedly by washin... Read More
    RoHS directive (corresponding to 10 substances)  Quantity per Package (Pair)  Cut Resistance  Level X  Color  White 
    from S$16.99
    Min. 2 days
  40. Cut-resistant gloves cut guard G132
    MIDORI ANZEN Cut-resistant gloves cut guard G132
    Cut resistance is improved by using glass fiber. The hem is overlocked to prevent fraying, and long fibers are used for low dust generation. For automobile-related, equipment maintenance, glass-related, precision machinery, etc. * High-strength polyethylene is generally superior in light resistan... Read More
    Quantity per Package (Pair)  Thickness (mm)  1.3  Gauge No.  13 gauge seamless  Cut Resistance  5(EN388)  Color  Gray 
    Rating:
    87%
    from S$15.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 837

Set Ascending Direction