All Category

Tool Bits

A bite is a type of cutting tool with a blade used in machine tools such as lathes and drilling machines. Used by attaching to machine tools. The shape varies greatly depending on the machine tool (lathe, milling machine, drilling machine, etc.) to be installed and the type of machining (external rounding, chamfering, threading). Also, even if the shape is the same, the type of tool used depends on the material being processed. Care should be taken when using a tool that is not suitable for the application, because the quality of the cutting surface of the material will deteriorate and the tool may be damaged by heat during cutting.
View : Grid List
Filter

Items 1 - 40 of 582

Set Ascending Direction
  1. Blade with cutting tool
    KOSHUHA PRECISION Blade with cutting tool
    Material  MV10  JIS Standard  67S type 
    from S$109.90
    Min. 4 days
  2. 33-inch (Right Single-edged Bit)
    HICUT 33-inch (Right Single-edged Bit)
    JIS Standard  33 type 
    Rating:
    83%
    from S$16.99
    Min. 2 days
  3. 43 inch (Cut-off Bit)
    HICUT 43 inch (Cut-off Bit)
    JIS Standard  43 type 
    Rating:
    85%
    from S$17.99
    Min. 2 days
  4. Completion byte Square byte
    MonotaRO Completion byte Square byte
    This is the point! 1. The base material is Swedish steel, which is said to be the best high-speed steel in the world. 2. It is said that heat treatment of Heiss is difficult, but it is performed at a heat treatment factory that specializes in Heiss and boasts a history of 50 years. 3. Polishing i... Read More
    Material  SKH57 
    Rating:
    94%
    from S$19.99
    Min. 2 days
  5. Type 11 (Drilling Bit)
    HICUT Type 11 (Drilling Bit)
    JIS Standard  Type 11 
    Rating:
    87%
    from S$25.99
    Min. 2 days
  6. 21 type (parting tool)
    HICUT 21 type (parting tool)
    JIS Standard  21 type 
    Rating:
    70%
    from S$19.99
    Min. 2 days
  7. Type 39 (Right tip round Sumibite)
    HICUT Type 39 (Right tip round Sumibite)
    JIS Standard  Type 39 
    Rating:
    80%
    from S$14.99
    Min. 2 days
  8. Type 36 (tip round sword byte)
    HICUT Type 36 (tip round sword byte)
    JIS Standard  Type 36 
    Rating:
    73%
    from S$14.99
    Min. 2 days
  9. Type 34 (Left single-edged tool)
    HICUT Type 34 (Left single-edged tool)
    JIS Standard  34 type 
    Rating:
    87%
    from S$15.99
    Min. 2 days
  10. High speed solid
    Mr. Meister High speed solid
    Shank  8mm square  Material  Heiss 
    Rating:
    91%
    from S$38.99
    Min. 2 days
  11. Type 13 (external thread cutting tool)
    HICUT Type 13 (external thread cutting tool)
    JIS Standard  Type 13 
    Rating:
    50%
    from S$24.99
    Min. 2 days
  12. 41 type (right facing byte)
    HICUT 41 type (right facing byte)
    JIS Standard  Type 41 
    Rating:
    70%
    from S$19.99
    Min. 2 days
  13. Type 11 (hole drilling tool)
    Sanwa Manufacturing Type 11 (hole drilling tool)
    Rough / general turning, flat cutting, shape cutting, copying lathe, milling
    JIS Standard  Type 11 
    Rating:
    87%
    from S$24.99
    Min. 2 days
  14. Carbide Blade Bit (Diligent Bit)
    Sanwa Manufacturing Carbide Blade Bit (Diligent Bit)
    It is a JIS standard product.
    Rating:
    87%
    from S$22.99
    Min. 2 days
  15. Carbide blade (tip-maru sword)
    Sanwa Manufacturing Carbide blade (tip-maru sword)
    Rating:
    80%
    from S$22.99
    Min. 2 days
  16. Carbide blade (right single blade)
    Sanwa Manufacturing Carbide blade (right single blade)
    Rating:
    100%
    from S$22.99
    Min. 2 days
  17. Stick byte
    SUPER TOOL Stick byte
    Hardness  HRC66~68  Material  SKH57 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  18. 40 type (left tip round sumi-byte)
    HICUT 40 type (left tip round sumi-byte)
    JIS Standard  40 type 
    Rating:
    60%
    from S$14.99
    Min. 2 days
  19. Carbide cutting tool (parting tool)
    Sanwa Manufacturing Carbide cutting tool (parting tool)
    JIS Standard  43 type  Material  M20 
    Rating:
    85%
    from S$25.99
    Min. 2 days
  20. Completion byte
    ASSAB Completion byte
    Made from Swedish pure high-speed steel, it is carefully hardened and tempered, and has a structure consisting of a uniform arrangement of extremely fine particles, resulting in extremely high hardness (HRC68-69) and machinability. It is a typical high-quality finished bite that demonstrates.
    Hardness HRC  68~69  Material  Cobalt high speed steel 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  21. Carbide blade (right single blade)
    Sanwa Manufacturing Carbide blade (right single blade)
    JIS Standard  33 type  Material  K10 
    Rating:
    70%
    from S$22.99
    Min. 2 days
  22. Type 35 (serious byte)
    HICUT Type 35 (serious byte)
    JIS Standard  35 type 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  23. The Cutting Bit
    SUPER TOOL The Cutting Bit
    For grooving and parting off.
    Hardness  HRC66~68  JIS classification  S type  Material  High speed steel (SKH57) 
    Rating:
    60%
    from S$53.99
    Min. 2 days
  24. Completion byte Sticky byte
    KOSHUHA PRECISION Completion byte Sticky byte
    Material  NK4 
    Rating:
    87%
    from S$39.99
    Min. 2 days
  25. Parting Plate Bit Holder (Bit Holder)
    SAKAI MACHINE TOOL Parting Plate Bit Holder (Bit Holder)
    Use by inserting the parting plate bite.
    Suitable Model  ML210、ML360 
    Rating:
    63%
    from S$58.99
    Min. 2 days
  26. Type 20 (flat byte)
    HICUT Type 20 (flat byte)
    Rating:
    85%
    from S$22.99
    Min. 2 days
  27. Type 15 (internal thread cutting tool)
    HICUT Type 15 (internal thread cutting tool)
    JIS Standard  15 type 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  28. Completion byte Round byte
    KOSHUHA PRECISION Completion byte Round byte
    Rating:
    84%
    from S$12.99
    Min. 2 days
  29. Finishing Square Bits (inch)
    TOKO Finishing Square Bits (inch)
    High Co, high V, molybdenum-based high-speed. Has excellent wear resistance.
    Material  SKH57 equivalent 
    from S$25.99
    Min. 2 days
  30. Carbide cutting tool (parting tool)
    Sanwa Manufacturing Carbide cutting tool (parting tool)
    from S$24.99
    Min. 2 days
  31. Board bite
    KOSHUHA PRECISION Board bite
    Rating:
    100%
    from S$46.99
    Min. 4 days
  32. Complete Bit
    ASSAB Complete Bit
    Made from Swedish pure high-speed steel, it is carefully hardened and tempered, and has a structure consisting of a uniform arrangement of extremely fine particles, resulting in extremely high hardness (HRC68-69) and machinability. It is a typical high-quality finished bite that demonstrates.
    Material  Cobalt high speed steel 
    Rating:
    90%
    from S$39.99
    Min. 2 days
  33. Carbide blade (right single blade)
    Sanwa Manufacturing Carbide blade (right single blade)
    JIS Standard  33 type  Material  M20 
    from S$22.99
    Min. 2 days
  34. Parting Holder
    SUPER TOOL Parting Holder
    With bite
    from S$149.90
    Min. 2 days
  35. Tapping tool 42 type hole turning tool for turning
    KOSHUHA PRECISION Tapping tool 42 type hole turning tool for turning
    The steel type of the blade is for turning (NK-4 steel type), and the one that is most suitable for each cutting condition is used. It is a JIS standard product.
    JIS Standard  42 type  Hardness HRC (Blade)  64~67  Material (Tip)  NK4  Material (Shank)  S55C 
    from S$56.99
    Min. 2 days
  36. Blade with cutting edge
    Sanwa Manufacturing Blade with cutting edge
    It uses a material that has better high-temperature hardness and wear resistance than conventional high-speed steel.
    Rating:
    100%
    from S$45.99
    Min. 2 days
  37. Stick tool holder set (with stick tool)
    SUPER TOOL Stick tool holder set (with stick tool)
    A set of holder and bite. Since the holder is a hail type, the shock given to the bite can be softened. For grooving and parting off.
    Rating:
    100%
    from S$109.90
    Min. 2 days
  38. Type 37 (Right Sumibite)
    HICUT Type 37 (Right Sumibite)
    JIS Standard  37 type  Right or Left Hand  Right 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  39. [General purpose] Carbide slotted parting tool 8mm square
    Mr. Meister [General purpose] Carbide slotted parting tool 8mm square
    Carbide slot air bite for parting off, ideal for cutting workpieces and grooving. A cutting tool with replaceable inserts designed for small lathes. The shank is 8 mm square and can be used with most models in the Mr. Meister / Small Machine Tool series. If the parting tip is also worn, the tip c... Read More
    Shank  8mm square  Material  (Chip) Carbide  Shape  (Chip) box 
    from S$139.90
    Min. 2 days
  40. Cutting tool 52 type hole threading tool for turning
    KOSHUHA PRECISION Cutting tool 52 type hole threading tool for turning
    The steel type of the blade is for turning (NK-4 steel type), and the one that is most suitable for each cutting condition is used. It is a JIS standard product.
    JIS Standard  52 type  Hardness HRC (Blade)  64~67  Material (Tip)  NK4  Material (Shank)  S55C  Suitable Model  lathe 
    from S$46.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 582

Set Ascending Direction