All Category

Indexable Toolholders

A holder is a tool for cutting by attaching a chip. Cutting is performed by fixing a suitable cutting edge (tip) such as triangle, rhombus, square, etc. to the holder body. The method of fixing the tip is mainly screw-on type, and there are also clamp-on type and pin lock type depending on the manufacturer. The advantage of using a holder is that it eliminates the need to grind the cutting edge. It is also possible to use multiple inserts with a single holder body. Let's compare the tips and clamping methods that fit when purchasing a new one.
View : Grid List
Filter

Items 1 - 40 of 3205

Set Ascending Direction
  1. C cutter micro
    BIG DAISHOWA C cutter micro
    from S$75.99
    Min. 5 days
  2. Dynamic bar (steel shank) SCLC type
    KYOCERA Dynamic bar (steel shank) SCLC type
    Dynamic bar that realizes excellent chip evacuation performance Furthermore, the combination of stress analysis technology and special alloy holder demonstrates high rigidity and chatter resistance. Ensures unprecedented finished surface and dimensional accuracy. Inner diameter / back end face pr... Read More
    Suitable Tip  Diamond shape 80 °  Shank  Steel shank  Cutting angle Kr (°)  95  Tip clearance angle (°)  Clamp system  Screw clamp method 
    from S$139.90
    Min. 3 days
  3. Indexable Tool Holder
    KYOCERA Indexable Tool Holder
    * If you order by cash on delivery, it may be shipped the next day or later.
    Right or Left Hand 
    from S$269.90
    Min. 3 days
  4. holder
    ISCAR holder
    Economical with 2 corners, twisted blade structure. Multi-functional processing is possible and it is effective for complicated shape workpieces. Compatible with do-grip and heli-grip tips (tip width 4 mm or more). End face grooving, inner diameter end face grooving
    Right or Left Hand  Left hand  Clearance Angle (°)  Clamp system  Double clamp 
    from S$589.90
    Min. 4 days
  5. holder
    ISCAR holder
    from S$189.90
    Min. 6 days
  6. holder
    ISCAR holder
    * If you order by cash on delivery, it may be shipped the next day or later.
    Right or Left Hand  Right hand 
    from S$389.90
    Min. 4 days
  7. Rigidity enhanced type for parting and grooving
    ISCAR Rigidity enhanced type for parting and grooving
    Right or Left Hand  Left hand 
    from S$279.90
    Min. 2 days
  8. Pico cut
    ISCAR Pico cut
    In small inner diameter boring, the tip can be replaced to perform inner diameter grooving, turning, chamfering, end face grooving, and (multifunctional pico multi) machining. Turning (multifunctional)
    Material  Carbide + TiAlN coating  Right or Left Hand  Right hand 
    from S$99.90
    Min. 3 days
  9. holder
    ISCAR holder
    Stable processing is possible with the newly developed doug grip clamp. Since it is attached with a special wrench, the life of the holder jaw can be maintained for a long time. Cut off
    Right or Left Hand  Right hand 
    from S$189.90
    Min. 3 days
  10. Parts Screw
    KYOCERA Parts Screw
    * If you order by cash on delivery, it may be shipped the next day or later.
    Angle α (°) 
    Rating:
    100%
    from S$5.69
    Min. 2 days
  11. holder
    HERTEL holder
    A holder for cutting the outer diameter. Suitable for chips starting with TN ○○ 1604.
    Type  Pin lock type  Shape  Equilateral triangle  6 ° (angle when moving the insert)  Suitable Tip  Equilateral triangle 60 °  Right or Left Hand  Right  Cutting angle Kr (°)  91  Tip clearance angle (°) 
    Rating:
    90%
    from S$76.99
    Min. 2 days
  12. holder
    Mitsubishi Materials holder
    Suitable Tip  Diamond shape 80 °  Right or Left Hand  Right  Cutting angle Kr (°)  95  Tip clearance angle (°) 
    Rating:
    71%
    from S$87.99
    Min. 2 days
  13. Parts Torx wrench
    KYOCERA Parts Torx wrench
    Rating:
    100%
    from S$6.79
    Min. 2 days
  14. holder
    HERTEL holder
    Type  Lever lock  Shape  Diamond 80 °  Suitable Tip  Diamond shape 80 °  Right or Left Hand  Right  Dimension l2 (mm)  26  Cutting angle Kr (°)  95  Tip clearance angle (°) 
    Rating:
    85%
    from S$76.99
    Min. 2 days
  15. Parts Screw
    KYOCERA Parts Screw
    * If you order by cash on delivery, it may be shipped the next day or later.
    Angle α (°) 
    from S$5.59
    Min. 2 days
  16. Clamp screw
    Mitsubishi Materials Clamp screw
    Rating:
    90%
    from S$9.59
    Min. 2 days
  17. Parting blade
    ISCAR Parting blade
    Suitable Tip  GT □ 
    Rating:
    80%
    from S$189.90
    Min. 2 days
  18. holder
    Mitsubishi Materials holder
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Suitable Tip  triangle  Cutting Angle (°)  93  Cutting angle Kr (°)  93  Tip clearance angle (°)  11  Clamp system  Screw on 
    from S$149.90
    Min. 2 days
  19. Rolling knurl piece for flat eyes
    SUPER TOOL Rolling knurl piece for flat eyes
    Has excellent toughness and abrasion resistance.
    Type  flounder  Material  SKS31  Mass (g)  13  Hole Diameter (Φmm)  4.76  Outer Diameter (Φmm)  19.2  Suitable Holder  KHS1 
    Rating:
    20%
    from S$12.99
    Min. 2 days
  20. Parts Screw
    KYOCERA Parts Screw
    screw * If you order by cash on delivery, it may be shipped the next day or later.
    Angle α (°) 
    Rating:
    100%
    from S$5.29
    Min. 2 days
  21. screw
    SANDVIK screw
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$1.19
    Min. 2 days
  22. Rolled knurl piece
    SUPER TOOL Rolled knurl piece
    Has excellent toughness and abrasion resistance.
    Type  Aya eyes  Material  SKS31  Mass (g)  26  Suitable Holder  KHS 
    Rating:
    80%
    from S$26.99
    Min. 2 days
  23. Spiral Cutter (for CC02)
    JAPAN AUTOMATIC MACHINE Spiral Cutter (for CC02)
    Rating:
    100%
    from S$339.90
    Min. 2 days
  24. parts
    Mitsubishi Materials parts
    Rating:
    100%
    from S$2.99
    Min. 2 days
  25. holder
    Mitsubishi Materials holder
    Outer diameter processing
    Suitable Tip  Equilateral triangle 60 °  Cutting angle Kr (°)  93  Tip clearance angle (°) 
    Rating:
    80%
    from S$189.90
    Min. 2 days
  26. Sheet
    Mitsubishi Materials Sheet
    Rating:
    100%
    from S$14.99
    Min. 2 days
  27. 110mm knurled holder (for flat eyes)
    ESCO 110mm knurled holder (for flat eyes)
    from S$37.99
    Min. 2 days
  28. Universal boring bar socket
    PROCHI Universal boring bar socket
    Compatible with almost all CNC lathes, the permanent set of cutting tools reduces work time. High-precision tooling for CNC lathes. The brim hollow set allows a permanent set (semi-permanent mounting) of the cutting tool for each work, so the setup time can be shortened. Since it is tightened wit... Read More
    from S$87.99
    Min. 3 days
  29. Parts Torx wrench
    KYOCERA Parts Torx wrench
    from S$6.79
    Min. 2 days
  30. OD threading tool
    CARMEX OD threading tool
    * Tips are not included.
    Clamp system  Screw-on type 
    from S$129.90
    Min. 2 days
  31. Internal threading tool
    CARMEX Internal threading tool
    * Tips are sold separately
    Specification  Without anvil  Clamp system  Screw-on type 
    from S$149.90
    Min. 5 days
  32. Sheet
    Mitsubishi Materials Sheet
    from S$22.99
    Min. 2 days
  33. Seat stop pin
    Mitsubishi Materials Seat stop pin
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$2.99
    Min. 2 days
  34. Coarse Knurling Roller
    SUPER TOOL Coarse Knurling Roller
    It is sharp and lasts a long time.
    Type  Aya eyes  Mass (g)  20  Suitable Holder  KH2CN20N・25N 
    Rating:
    100%
    from S$58.99
    Min. 2 days
  35. Turning Toolholder, Blade
    KYOCERA Turning Toolholder, Blade
    Parting blade * If you order by cash on delivery, it may be shipped the next day or later.
    from S$159.90
    Min. 2 days
  36. ROLL AUTO-SLIDING KNURLING HOLDER (For Standard Knurling Wheel: Cross Cut)
    SUPER TOOL ROLL AUTO-SLIDING KNURLING HOLDER (For Standard Knurling Wheel: Cross Cut)
    Comes with an initial position setting mechanism for the knurled holder. The automatic alignment (± 2.5 mm with respect to the initial position) by the upper and lower auto slide mechanism eliminates the difference in rolling force generated between the two knurled pieces, enabling knurling with ... Read More
    Suitable Model  lathe  Type  For checkered pattern 
    from S$339.90
    Min. 2 days
  37. Blade (for outer diameter)
    Mitsubishi Materials Blade (for outer diameter)
    Right or Left Hand  Right 
    from S$169.90
    Min. 3 days
  38. Tip screw
    SANDVIK Tip screw
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$2.69
    Min. 2 days
  39. holder
    KYOCERA holder
    General outer diameter holder (for outer diameter / copying, heavy cutting) * If you order by cash on delivery, it may be shipped the next day or later.
    Shape  triangle  Right or Left Hand  Right hand  Corner  0.8R  Cutting Edge Inclination Angle λ (°)  -6  Side Rake Angle (°)  -6  Cutting angle Kr (°)  93  Tip clearance angle (°)  Clamp system  Wedge lock 
    Rating:
    100%
    from S$129.90
    Min. 6 days
  40. Rolling knurl piece KNSRL22 pin
    SUPER TOOL Rolling knurl piece KNSRL22 pin
    Suitable for  For KNSRL22 
    from S$10.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 3205

Set Ascending Direction