Test Pumps
A test pump is a pump that is used to investigate the condition of pipes when performing waterworks. It is often used to measure water tank capacity, maximum pressure, etc., and inspections can confirm the safety of piping and tanks. There are various types of test pumps, so it is best to use them depending on the scale of the test target. Small ones are convenient to carry, but be careful when you need high pressure, as it must be a large pump.
Other Related Pages
MonotaRO Hydrostatic Test Pump ManualA lightweight, compact and easy-to-carry test pump. It can be used for pressure resistance leak testing of piping, tanks, valves, fittings, etc. * Do not disassemble or modify. * Do not handle with wet hands. * Please hold it with both hands when transporting. * Please use tap water instead of mu... Read MoreMaximum Pressure (MPa) 5 Water Adsorption (cc / 1 time) About 13 Tank Capacity (L) 4.5 Material (Tank) polypropylene (P. P. P.)- KYOWA Hydrostatic Test Pump ManualThe valve uses a high-precision stainless steel (SUS 304) ball valve. The valve seat is replaceable and easy to replace. The plunger packing is a standard O-ring NO.P-22. All fulcrum pins are stainless steelWater Adsorption (cc / 1 time) 13 Plunger Diameter (mm) 22
- KAKUDAI MFG Hydraulic tester for measuring hydraulic pressureThe scale of the pressure gauge is 0.02MPa for fine measurement. Easy to install because the nut and body rotate. It is installed in the middle of piping and used for measuring water pressure when passing water.
- KYOWA Manual Test PumpA handy type that is also convenient to carry. Easy to send water with a ball tap directly connected to the water supply. The tank is made of plastic and has a dust-proof top cover, which makes it light and does not rust.Tank Capacity (L) 18 Material (Tank) Poly tank Discharge Port Diameter Rc 3/8from S$869.90Min. 2 days
- ASADA Test Pump TP50NLightweight and compact, it is convenient to carry. Equipped with an air bleeding valve for continuous use. Easy-to-read Φ75mm pressure gauge. A tank shape that is stable and easy to work with. The tank and tank lid are made of resin with high corrosion resistance. Uses a rubber high-pressure hos... Read MoreSet Contents Pressure gauge, high pressure hose 1m Tank Capacity (L) 3 Discharge Port Size PT1/4 Maximum Pressure (MPa[kgf/cm2]) 4.0[40.8] Material (Tank) Resin Discharged water volume 16mL / time
- KAKUDAI MFG Faucet testerWater pressure can be easily measured by installing it between the faucet body and the pipe.Specification For mounting W26 thread 20 screwsfrom S$129.90Min. 2 days
- KYOWA Kyowa Pump TesterSince it is a non-lubricating pump that does not require any oil (lubricating oil, grease), it is free from maintenance and inspection. It is a future high-pressure pump that eliminates all waste. Since it is a pump that also serves as a motor shaft, there is no need to worry about belt slippage.... Read Morefrom S$979.90Min. 2 days
- SANEI Water pressure gauge setFor water supply onlyOperating Temperature Range (℃) 60 or lessfrom S$77.99Min. 2 days
- TERADA PUMP MFG. Hydrostatic Test Pump Manual TypeIt is a manual type. By adopting "one-touch coupler", the pump body and the test object can be connected with one touch. Based on a unique idea, the position of the operation handle is designed to be placed at right angles to the outlet and the pressure gauge, making operation easy and ... Read MoreMaximum Pressure (MPa) 3.43 Discharge Amount 13 (cc / 1 time) Tank Capacity (L) 4.6 Discharge Port Size Rc1/2 Material (Tank) Resin
- AX BRAIN Water pressure test gauge 20Corresponds to the model of each waterworks bureau. Made of brass, there is no need to worry about rust. Valves are set in 2 places! A more perfect pipe pressure resistance test can be performed. Water type. For water pressure inspection of detached houses and water pressure test of apartment hou... Read MoreOpening Diameter (Φmm) 20 Connector Thread Φ33.2 × 11 mountains
-
- ASADA Electric & Manual Test PumpWater is sent at high speed with a charging driver and pressurized manually. Work quickly and easily. Equipped with an air bleeding valve for continuous use. After full water, it can be manually pressurized to 4.0Mpa. With a large capacity tank, workability is outstanding. Equipped with an easy-t... Read MoreTank Capacity (L) 10.5 Maximum Pressure (MPa) Manual: 4.0, Gear pump: 0.2 Material (Tank) Resinfrom S$779.90Min. 2 days
- ASADA Electric test pumpLightweight and compact, only 9 kg Can be used both directly connected to the water supply and self-priming the tank. A pressure gauge containing glycerin that stabilizes the needle against vibration and is easy to see. Detects an abnormal load on the motor and automatically stops. For pressure r... Read MoreVoltage (V) 100 Motor (W) 200(100V) Noise Level (dB) 75 Maximum Pressure (MPa[kgf/cm2]) 3.92[40] Discharge Water Volume (L/min) 3.0/3.7(50/60Hz)
- TERADA PUMP MFG. Hydrostatic Test Pump (Electric Type)For pressure resistance and leakage test of various pipes. For pressure resistance and leakage test of tanks and valves. For destructive testing. For other high pressure water generation.Output (W) 200 Voltage (V): 100 Mass (kg): 9.0 Maximum Pressure (MPa) 3.0 Discharge Amount 2.9・3.5(L/min)
- TERADA PUMP MFG. Hydrostatic Test Pump (Manual Type)A compact body with condensed functionality. High pressure can be obtained with a simple operation. The operation handle is placed at right angles to the discharge port and the pressure gauge, making it easy to operate without getting in the way during operation. Increased pressure by improving t... Read MoreDischarge Amount 13 (cc / 1 time) Pressure (MPa [kgf/cm2]) 3.43 Tank Capacity (L) 4.6 Discharge Port Size G1/4 Material (Tank) Resinfrom S$489.90Min. 2 days
- Iwasaki Seisakusho Still water pressure measuring device + female typeMaterial Made of aluminium Shape Machino style femalefrom S$199.90Min. 2 days
- Iwasaki Seisakusho Pressure measuring device + Easy operability No. 1 pressure measuring deviceEasy-to-operate pressure measuring instrument for No. 1 (for 30A).Material Made of aluminium fitting size (A) 30from S$199.90Min. 12 days
- Iwasaki Seisakusho Pressure measuring device + pitot meter / pitotking + dedicated spoutThis item is an option for Pitoking / Pitot meter. Please see the instruction manual for how to use.Material Made of aluminiumfrom S$149.90Min. 7 days
- Iwasaki Seisakusho Pressure measuring device + pitot meter / pitotking + dedicated adapter 30A (fire screw)This item is an option for Pitoking / Pitot meter. Please see the instruction manual for how to use. * A separate 40A spout is required to use this product.Material Made of aluminium fitting size (A) 30from S$97.99Min. 2 days
- Iwasaki Seisakusho Pressure measuring device + pitoking + PAT.Anti-scattering water discharge pressure measuring instrument. Although it is a lightweight measuring instrument weighing only 1 kg, the cylindrical shape disperses the force, so it does not run wild during water discharge. Please see the instruction manual for how to use. There are various measu... Read MoreMaterial Body: resinfrom S$679.90Min. 7 days
- Iwasaki Seisakusho Intermediate pressure measuring instrumentMaterial Made of aluminiumfrom S$249.90Min. 7 days
- KAKUDAI MFG Water pressure tester for water meters (20 mm)There are two long and short vertical pipes that connect the pressure gauge and the main body, and they can be selected according to the site, making it easier to check. Since the valve is provided on the primary side of the tester, accurate testing can be performed even if there is a problem wit... Read Morefrom S$279.90Min. 5 days
- AWS Meter test gaugeUsed for water pressure inspection of detached houses and apartment houses. With 75mm pressure gauge for easy viewing of the meterfrom S$229.90Min. 4 days
-
- Iwasaki Seisakusho Pressure measuring device + pitot meter + PAT.Very light and convenient to carry! You can attach the Machino type hose with one touch by attaching the special adapter (sold separately).from S$329.90Min. 7 days
- Iwasaki Seisakusho Water pressure measuring instrument + male typeMaterial Made of aluminium Shape Machino type malefrom S$259.90Min. 7 days
- AWS Water pressure test kitFor water pressure test of water pipes. Infinite ways to assemble with connecting brackets. It is more profitable than purchasing the parts separately.from S$169.90Min. 6 days
- Iwasaki Seisakusho Pressure gauge + stainless steel pitokingMaterial Stainless steelfrom S$689.90Min. 31 days
- ESCO G1/2" x G1/2" water pressure test gaugeIncluded Accessories elbow, packing Measuring Range (MPa) 0～0.6 Operating Temperature Range (℃) 0～50 Thread Size G1/2from S$99.90Min. 3 days
-
- KAKUDAI MFG Water pressure tester for water meters (for Kinmon screws)For caliber 13 mm: face-to-face 100/165 mm, caliber 20 mm: face-to-face 190 mm.Specification For Kinmon screwsfrom S$459.90Min. 5 days
- Iwasaki Seisakusho Pressure measuring device + water collector for pittingThis item is an accessory of Pitoking. Please see the instruction manual for how to use. This water collector is a convenient option to send the water being measured to the drain. Since it is attached to the Pitoking body, it is common to all sizes.Size Common to all sizesfrom S$399.90Min. 7 days
- Iwasaki Seisakusho Pressure measuring device + stand gauge + female typeMaterial Made of aluminiumfrom S$249.90Min. 7 days
- KAKUDAI MFG Water pressure tester for water meter (for G screw)For caliber 13 mm: face-to-face 100/165 mm, caliber 20 mm: face-to-face 190 mm.Specification For G threadfrom S$459.90Min. 5 days
- ASADA Pressure gauge + Φ100 (with notarized certificate)Specification With calibration certificate Display Pressure Range (MPa) 0～4.0 Connection size 3/8from S$329.90Min. 5 days
- ASADA Test pump kit high pressure washer 4A kit that enables the high pressure washer 440 to be used as an electric test pumpfrom S$249.90Min. 7 days
-
- KYOWA Pressure gauge for manual test pump T-300NSuitable for KYOWA Tester T-300Nfrom S$249.90Min. 6 days
- MIYAKO Tee for Meter Test (Clean Water)A fitting that is convenient for water pressure testing after water supply piping. It can be installed at the water meter installation position and a water pressure test can be performed with a test pump using the water supply on the primary side. It can be attached to the water standard 20. Plea... Read MoreMaterial Made of bronzefrom S$69.99Min. 6 days
- ESCO 120bar (11.7MPa) Water pressure test pumpWater pipe leaks, for testingfrom S$759.90Min. 3 days
