Electric Heating Equipment (Heaters)
Electric heating equipment (heater) is a machine that can generate heat to warm a liquid. If you put it in water, you can use it as a water heater, and you can easily make hot water. Since the throw-in type is devised in shape, it is characterized by a safe design so that the bottom of the bucket will not be damaged even if it is used directly in a poly bucket. It is used in various water works such as car washing, sheet metal painting, tile construction and cleaning. There are other heaters used to prevent water from freezing.
Other Related Pages
Sakaguchi E.H VOC Sakaguchi Peltier Kit SPE-UC-100Power Consumption (VA) (Maximum) 150 Endothermic amount (W) (Maximum) 33 Operating Temperature Range (℃) -50 to 150 or less Temperature Display Accuracy 0.1℃ Rated Current (A) 10 Mass (kg) 2.6 Plate Dimensions (mm) 80×80 Input Voltage (V) AC100(85-132) Motor Rating DC12V/0.21A Rated Voltage (V) DC14 Type of Control PID type voltage suppression method Output Current (A) Peltier side: (Maximum) 10 Output Voltage (V) Peltier side: (Maximum) DC14 Accuracy (℃) ± 0.3 or ± 0.5% of set valuefrom S$3,299.00Min. 6 days- HAKKO (Hakko Electric) Hot air beam controllerSince the pressure gauge is built in the main body, it can be easily controlled. It has a built-in flow rate limit switch. If there is no air supply, the heater will not operate, so you can use it with confidence. It has a built-in temperature controller. From monitoring the air temperature to fi... Read MoreMain Unit Dimensions, Width W x Depth D x Height H (mm) 230×210×198 Hysteresis 3℃ Specification Front connection method Air Pressure (MPa) Input: 0.4-1
Output: 0.1-0.3 Suitable for K type thermocouple Terminal Screw M4 Temperature Control ON/OFF control Driving System SSR (Solid State Relay) switching Type Standard Temperature Display Accuracy ±(0.5%F.S.+1digit) Room Temperature Correction Accuracy ±2℃(5～40℃)from S$3,299.00Min. 4 days - Sakaguchi E.H VOC Compression fittingIt is a mounting part for the T35 type sheath thermocouple.
-
- HAKKO (Hakko Electric) Plug type heaterWith a protective tube for the sensor, equipment parts such as temperature controller overheating prevention can be easily attached. Since it is easy to install and handle and requires less installation space, the equipment cost is low and the structure is robust, so you can use it with confidenc... Read MoreDimension B (mm) 25 Material (Heater Sheath) C1220T (copper tube) nickel plating Protective Tube C1220T (copper tube) nickel plating Plug FC250 (iron casting) nickel plating Specification For water Material (Gasket) Non-asbestos (t1.5) Cap SPCC (paint)
- Watlow Miniature connectorThermocouple connector that uses the American National Standards Institute (ANSI) color code. Excellent heat and impact resistance. High-quality connectors with a compact design that take up little space and strong contact pressure. * Plugs and jacks are not sold as a set.Heat Resistance Temperature (℃) 200
- Sakaguchi E.H VOC Space heater (lead type)* Since all exteriors are made of bonded steel plate, please adjust the temperature so that the maximum operating temperature on the heater surface is below 300 ° C. * If the surface temperature of the heater exceeds 400 ° C, rust may occur on the bare metal due to thermal deterioration of the zi... Read Morefrom S$24.99Min. 2 days
- Sakaguchi E.H VOC Coil fin heaterDimension D (Φmm) 12 Sheath Outer Diameter (Φmm) 12 Dimension B (mm) 30from S$46.99Min. 6 days
- Yagami Inc. Yagami Temperature Detector K Thermocouple Φ4 × 2000 (L)An inexpensive temperature detector with a stainless steel protective tube. For temperature control of various electric heaters in combination with a temperature controller. * Do not forcibly pull the lead part of the sensor. Store in a dry and clean place. It is not waterproof.Part No. 1035012 Mass (g) 15 Lead Wire (m) 2 (crimp) (with terminal) Regular Temperature (℃) 300 Protective Tube Diameter D (Φmm) 4 Protective tube length L (mm) 50 Trusco Part No. 811-6692 Sensor Type K thermocouple Material SUS304from S$43.99Min. 2 days
- Sakaguchi E.H VOC Coats heaterThe coats heater is a heating method that uses near-infrared radiation. More than 85% of the input power becomes infrared rays and heats efficiently. The standard heater is manufactured so that the color temperature is 2500K, and the infrared wavelength region has a peak wavelength of about 1.2 μ... Read MoreMaximum Resistant Temperature (℃) (Terminal) 200 Color Temperature (K) 2500 Specification Terminal: Heat-resistant lead wire
- HAKKO (Hakko Electric) Ito can warmerIt is designed not to be exposed to abnormally high temperatures. It rises to the target temperature by turning it on and off. Easy to carry. A load switch is used, and the power turns on and off when the can is taken in and out. The temperature can be set arbitrarily. (Set at 30 ° C at the time ... Read MoreMass (kg) 4.5 Setting Temperature (℃) 20-60 (with accelerator thermo) Voltage (V) 100 Dimensions, Width W x Depth D x Height H (mm) 290×290×260 Inner container dimensions (mm) 250×250×170 Power Cable (m) 1.9 Applicable Voltage (V) 100 50 / 60Hz (with load switch)from S$869.90Min. 2 days
- Sakaguchi E.H VOC Far-red ceramic heater standard [S-II type]By adopting a high-efficiency radiator, the heating and drying time can be shortened. Since it is a planar heating element with a uniform temperature distribution, it can be heated uniformly. Accurate temperature control is possible, and block-by-block control is possible. By using the sensor bui... Read MoreSpecification (Center wavelength) 6.15-3.75μm Tensile Strength (kg) (Lead wire) 15 Highest Temperature (℃) (Surface) 500 Service Life 10,000 hours or more Insulation Resistance (MΩ) 1000 or more Dielectric Breakdown Voltage (kV) 4 or more Time to Stabilize (min) 6～8from S$97.99Min. 2 days
-
- Sakaguchi E.H VOC K type Φ0.5 sheathed thermocouple with flexible compensating lead wire (Max.The flexible fluororesin (exodermis) compensating lead wire has excellent flexibility, heat resistance, cold resistance, flame resistance, and chemical resistance, making it suitable for wiring to moving parts such as injection molding machines and robots. The entire thermocouple, including the s... Read MoreLength (mm) (Compensation conductor) 1000 Heat Resistance Temperature (℃) (Compensation lead) 200 Regular Temperature (℃) 500 Sleeve Dimensions (Φmm × mm) 6.5×30 Tolerance Class 1 Compensation lead Flexible fluororesin Wire Type K type Material (Sheath) SUS316 Contact Ungroundedfrom S$199.90Min. 2 days
- Sakaguchi E.H VOC Coat heater holderA holder (metal fitting with insulator) for fixing the heater.
- Sakaguchi E.H VOC Reflective shade for far infrared heaterA reflective shade for far-infrared heaters. By using a reflective shade, the irradiation range of infrared energy radiated from the heater can be concentrated and the heating efficiency can be improved. Heating efficiency can be improved by attaching it to a far-infrared heater. * If the tempera... Read Morefrom S$77.99Min. 6 days
- HAKKO (Hakko Electric) Ultra W Stainless sheath typeCompact, high capacity, water cartridge heater that can be installed in any space. It can be installed in a small space and can be heated with high thermal efficiency and little loss. It is a heater for water heating using "Ultra Five" which is well-established as a cartridge heater. It... Read MoreDensity of Effective Heating Area (W/cm2) 7
- HAKKO (Hakko Electric) Plug Type HeaterSince it has a protective tube for the sensor, device parts such as temperature controller overheating prevention can be easily attached. Since it is easy to install and handle and requires less installation space, the equipment cost is low and the structure is robust, so you can use it with conf... Read MoreMaterial (Gasket) Non-asbestos (t1.5) Cap SPCC (paint) Specification For waterfrom S$699.90Min. 5 days
- HAKKO (Hakko Electric) Ultra W copper sheath typeCompact, high capacity, water cartridge heater that can be installed in any space. It can be installed in a small space and can be heated with high thermal efficiency and little loss. It is a heater for water heating using "Ultra Five" which is well-established as a cartridge heater. It... Read MoreDensity of Effective Heating Area (W/cm2) 15from S$229.90Min. 5 days
- Yagami Inc. Plug Heater LAG TypeThe wetted parts are all made of stainless steel, achieving a long life. The plug has a solid structure with stainless casting by the lost wax method. It is necessary to use it together with the separately sold temperature controller. * As a general rule, it is installed horizontally. * It is nec... Read MorePart No. 1084616 Ambient Temperature (℃) 10～60 Density of Effective Heating Area (W/cm2) 2.5 Voltage (V) 200 Voltage 200V three phase Power Consumption (kW) 3000 Dimension L (mm) 580 Ambient Humidity (% RH) 85 or lessfrom S$479.90Min. 27 days
- AQUA SYSTEM Heat jacketMade of reinforced cloth, it can be used for various containers. Since it is foldable, it does not take up space for storage. Keeping the oil, which becomes more viscous and difficult to handle due to low temperatures, at 30-40 ° C makes it easier to transfer and subdivide. * We do not deliver to... Read MorePower Input (V) 100from S$1,999.00Min. 6 days
- Watlow Standard connector [plug]Thermocouple connector that uses the American National Standards Institute (ANSI) color code. It has excellent heat and impact resistance and is easy to install. * Plugs and jacks are not sold as a set.Dimension (mm) (Pin spacing) 11.1 Heat Resistance Temperature (℃) 215 Dimension (Φmm) Pin: (+) 3.97, (-) 4.78
- Sakaguchi E.H VOC Far-red ceramic heater standard [S-I type]By adopting a high-efficiency radiator, the heating and drying time can be shortened. Since it is a planar heating element with a uniform temperature distribution, it can be heated uniformly. Accurate temperature control is possible, and block-by-block control is possible. By using the sensor bui... Read MoreSpecification (Center wavelength) 6.15-3.75μm Tensile Strength (kg) (Lead wire) 15 Highest Temperature (℃) (Surface) 500 Service Life 10,000 hours or more Insulation Resistance (MΩ) 1000 or more Dielectric Breakdown Voltage (kV) 4 or more Time to Stabilize (min) 6～8from S$129.90Min. 6 days
- HAKKO (Hakko Electric) Ultra W 800Compact, high capacity, water cartridge heater that can be installed in any space. It can be installed in a small space and can be heated with high thermal efficiency and little loss. It is a heater for water heating using "Ultra Five" which is well-established as a cartridge heater. It... Read MoreDensity of Effective Heating Area (W/cm2) 20 Pipe Parallel Thread Nominal Size R1/2 Power Cable Silicone rubber cabtyre cord 300mm Voltage (V) Three-phase 220from S$329.90Min. 5 days
- Sakaguchi E.H VOC Movable flangeIt is a mounting part for the T35 type sheath thermocouple.from S$12.99Min. 6 days
- HAKKO (Hakko Electric) Plug heater Stainless steel sheath Standard typeWith a protective tube for the sensor, equipment parts such as a temperature controller and overheating prevention can be easily installed. The equipment cost is low because it is easy to install and handle and requires less installation space. Moreover, it is structurally robust, so you can use ... Read MoreDensity of Effective Heating Area (W/cm2) 7.5from S$639.90Min. 5 days
- Sakaguchi E.H VOC [For oil heating] Plug heater (OP type)Dimension C (mm) 15 Dimension B (mm) 23 Voltage (V) Single phase / Three phase 200from S$229.90Min. 6 days
- HAKKO (Hakko Electric) Plug heater copper sheath standard typeWith a protective tube for the sensor, equipment parts such as a temperature controller and overheating prevention can be easily installed. The equipment cost is low because it is easy to install and handle and requires less installation space. Moreover, it is structurally robust, so you can use ... Read MoreDensity of Effective Heating Area (W/cm2) 10 Dimension B (mm) 25 Voltage (V) Three-phase 200from S$439.90Min. 5 days
- HAKKO (Hakko Electric) Plug type heaterSince it has a protective tube for the sensor, device parts such as temperature controller overheating prevention can be easily attached. Since it is easy to install and handle and requires less installation space, the equipment cost is low and the structure is robust, so you can use it with conf... Read MoreCap SPCC (paint) Material (Gasket) Asbestos (t1.5) Specification For oil Plug FC250 (iron casting) nickel plating Voltage (V) Three-phase 200 Material (Heater Sheath) STKM11A (steel pipe) nickel plating Protective Tube STKM11A (steel pipe) nickel platingfrom S$469.90Min. 5 days
- Yagami Inc. Yagami Temperature Sensor PT100 Φ4 × 2000 (L)An inexpensive temperature detector with a stainless steel protective tube. For temperature control of various electric heaters in combination with a temperature controller. * It is not waterproof. Do not bend the temperature measuring part.Material (Protective tube): SUS304 Part No. 1035011 Lead Wire (m) 2 (with crimp Y terminal) Mass (g) 20 Pipe Diameter (Φmm) 4 Bulb Length (mm) 50 Trusco Part No. 811-6693 Sensor Type Pt100from S$97.99Min. 2 days
- HAKKO (Hakko Electric) Ultra WLThe stainless steel sheath (SUS316L) has excellent corrosion resistance. It can also be used for liquids other than oil (liquids that do not corrode stainless steel) such as alkaline solutions. A compact oil cartridge heater that can be installed in any space. It can be installed in a small space... Read MoreWire cross section (mm 2 ) 0.75 Density of Effective Heating Area (W/cm2) 2.5 Pipe Parallel Thread Nominal Size R3/4from S$489.90Min. 5 days
- HAKKO (Hakko Electric) Ultra W for seawaterPure titanium is used for the sheath, which has excellent corrosion resistance and is ideal for heating seawater and chemicals. Due to its light weight, it is easy to handle during installation. As it comes with a plug, it can be securely attached to the tank. It has a long life and is a robust d... Read MoreWire cross section (mm 2 ) 0.75 Density of Effective Heating Area (W/cm2) 5 Material Heater sheath plug: Titanium Pipe Parallel Thread Nominal Size R1/2from S$489.90Min. 5 days
- HAKKO (Hakko Electric) Thermal jacketBy wrapping the heat insulation jacket, heat dissipation from the can body and the surface of the heater can be suppressed, and the power consumption during heat insulation can be reduced to less than half. It can be installed with the heater wound. A heat-retaining jacket that can be wrapped aro... Read Morefrom S$749.90Min. 32 days
- Sakaguchi E.H VOC Far-red ceramic heater standard [S-Ⅲ type]By adopting a high-efficiency radiator, the heating and drying time can be shortened. Since it is a planar heating element with a uniform temperature distribution, it can be heated uniformly. Accurate temperature control is possible, and block-by-block control is possible. By using the sensor bui... Read MoreSpecification (Center wavelength) 6.15-3.75μm Tensile Strength (kg) (Lead wire) 15 Highest Temperature (℃) (Surface) 500 Service Life 10,000 hours or more Insulation Resistance (MΩ) 1000 or more Voltage (V) 200 Dielectric Breakdown Voltage (kV) 4 or more Time to Stabilize (min) 6～8from S$129.90Min. 6 days
- Sakaguchi E.H VOC [For Water Heating] SUS Plug Heater (SOP Type)Dimension C (mm) 15 Dimension B (mm) 23 Voltage (V) Single phase / Three phase 200from S$379.90Min. 6 days
- HAKKO (Hakko Electric) Hot air generatorIt has excellent durability. Even though it is small, it has high capacity and excellent safety. Supports 150 ° C circulation use.Terminal Screw M3.5 Specification With controller Type of Control PID control method (SSR drive) Earth Terminal M4 Installation Posture Horizontal Motor Type Condenser induction motor Temperature Sensor K type thermocouple Cable Size (mm2) 3.5 Cable Specification, Type VCT Heater Type Seeds heater Cable Length (m) 3 Intake Gas Temperature (℃) -10～150 Mounting Hole 4-7 × 14 round lengthfrom S$3,899.00Min. 5 days
- Sakaguchi E.H VOC Far red ceramic heater hollow [S-2 (II) type]By adopting a high-efficiency radiator, the heating and drying time can be shortened. Since it is a planar heating element with a uniform temperature distribution, it can be heated uniformly. Accurate temperature control is possible, and block-by-block control is possible. By using the sensor bui... Read MoreSpecification (Center wavelength) 6.15-3.75μm Tensile Strength (kg) (Lead wire) 5 Highest Temperature (℃) (Surface) 500 Service Life 10,000 hours or more Insulation Resistance (MΩ) 1000 or more Voltage (V) 200 Dielectric Breakdown Voltage (kV) 4 or more Time to Stabilize (min) 4～6from S$119.90Min. 6 days
- HAKKO (Hakko Electric) Plug heater for cleaning liquidWhen heating the cleaning liquid, the boiling point rises as the oil content in the liquid increases, and the heater surface temperature also rises. The surface temperature of the heater rises more and more. This causes the cleaning solution to pyrolyze and eventually begin to corrode the heater ... Read MoreProtective Tube, Inner Diameter x Effective Length (Φmm x mm) 10×115 Density of Effective Heating Area (W/cm2) 4.5 Temperature Controller Type B、A3 Pipe Parallel Thread Nominal Size G2 Voltage (V) Three-phase 200from S$599.90Min. 5 days
-
-
![Far-red ceramic heater standard [S-II type]](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono18448624-180426-02.jpg)
![[For water heating] Plug heater (HP type)](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono70757855-171120-02.jpg)
![Standard connector [plug]](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono18448895-180426-02.jpg)
Filter by categories
