All Category

Gear Pumps

A gear pump is a pump that uses the power of meshing gears. When the gears are engaged at the center, pressure is generated when they are opened, so that force is used for suction and discharge. Since it can handle liquids from low to high viscosity, it can be used for a wide range of liquids such as paint, candy, bonds and resins. Since the gear pump can change the rotation speed of the gear, the amount of liquid material discharged can be controlled, and it is also characterized by being quantitative.
View : Grid List
Filter

35 Item(s)

Set Ascending Direction
  1. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Operation Ambient Temperature (℃)  -10~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Motor Current (A)  0.65(50)/0.60(60)/0.60(60)  Motor Output (W)  100  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1430(50)/1720(60)/1730(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Mass (kg)  Motor part: 8.0  Number of Phases  Three-phase 
    from S$749.90
    Min. 4 days
  2. Trochoid Pump
    Nippon Oil Pump Trochoid Pump
    A tricolloid pump is an internal gear pump that rotates with an external gear (outer rotor) meshing with an internal gear (inner rotor), and the tooth profile is formed by a trochoidal curve. The trochoid pump consists of a circular case, an outer disc-shaped outer rotor with teeth on the inside,... Read More
    Operation Ambient Temperature (℃)  -20~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Maximum Pressure (MPa)  0.5  Viscosity Range for Use (mm2/sec)  10~500  Shape of Shank  Flat shaft (double chamfering)  Specification  Indoor specification  Suitable Fluid  Oil 
    Rating:
    90%
    from S$57.99
    Min. 2 days
  3. NG Gear Pump (Main Unit Only)
    Gear-esu NG Gear Pump (Main Unit Only)
    The direction of rotation can be either left or right. Oil shipping * This product is not covered by oil-compatible water. * Seal the fittings completely to prevent air leakage. * If possible, attach a strainer to the suction pipe to prevent solid matter from entering the pipe. * The hood valve o... Read More
    Material  Cast iron  Viscosity (cSt)  Equivalent to 80cst  Maximum Liquid Temperature to Use (℃)  Less than 40 ℃  Specification  No single pulley, no safety valve  Connector Thread  Taper screw for pipe 
    Rating:
    98%
    from S$279.90
    Min. 2 days
  4. Gear rotary pump KA
    Kamejima Gear rotary pump KA
    Since this machine is a stand-alone type, it is mainly used by setting it on a machine. The gear uses an original involute tooth mold, and the bearing uses phosphor bronze oil-impregnated and plain bearing, so it is excellent in smooth rotation and durability.
    Regular Pressure (MPa)  0~0.2  Viscosity Range for Use (mm2/sec)  50~500  Applicable Fluid Temperature (℃)  60 ° C or less  Material  Cast iron  Suitable Liquid  General mineral oil / solvent  Connector Thread  Parallel thread for pipe 
    Rating:
    85%
    from S$199.90
    Min. 2 days
  5. Single Gear Pump GC Series
    KOSHIN Single Gear Pump GC Series
    A pump with a simple structure, light weight, and small size. It can be widely used in all industries from industrial use to agriculture and fishery. Replenishment of drainage and cooling water for cleaning water stains on ships Material: Cast iron For the transfer of various liquids such as wate... Read More
    Discharge Pressure (MPa)  0.1~0.3  Rotational Speed (min -1 [rpm])  200~600  Material  Cast iron  Connection Thread  Parallel thread for pipe  Specification  Single unit pump  Suction Head (m)  less than 4 
    Rating:
    80%
    from S$249.90
    Min. 2 days
  6. Trochoid Pump
    Nippon Oil Pump Trochoid Pump
    Hydraulic oil / lubricating oil transfer
    Maximum Liquid Temperature to Use (℃)  -5~80  Maximum Discharge Pressure (MPa)  0.5  Direction of Rotation  Clockwise  Suitable Liquid  Hydraulic oil / lubricating oil 
    from S$58.99
    Min. 2 days
  7. Trochoid Pump
    Nippon Oil Pump Trochoid Pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Transfer Liquid Temperature (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Maximum Discharge Pressure (MPa)  0.5  Suitable Viscosity (mm2/s)  10~500  Suitable Liquid  Hydraulic oil / lubricating oil 
    from S$86.99
    Min. 2 days
  8. Motor Trochoid Pump
    Nippon Oil Pump Motor Trochoid Pump
    A tricolloid pump is an internal gear type pump that rotates with an external gear (outer rotor) and an internal gear (inner rotor) that fits inside, and the tooth profile is formed by a trochoidal curve. The trochoid pump consists of a circular case, an outer disc-shaped outer rotor with teeth o... Read More
    Operation Ambient Temperature (℃)  -10~40  Maximum Liquid Temperature to Use (℃)  -5~80  Operating Temperature Range (℃)  -5~80  Motor Current (A)  0.60(50)/0.55(60)/0.57(60)  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1390(50)/1660(60)/1690(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Output (W)  75  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Mounting  Horizontal  Mass (kg)  Motor part: 7.5  Number of Phases  Three-phase 
    Rating:
    60%
    from S$589.90
    Min. 2 days
  9. Trochoid Pump
    Nippon Oil Pump Trochoid Pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Maximum Liquid Temperature to Use (℃)  -5~80 
    from S$149.90
    Min. 2 days
  10. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Operation Ambient Temperature (℃)  -10~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Motor Current (A)  1.15(50)/1.10(60)/1.05(60)  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1410(50)/1690(60)/1710(60)  Motor Output (W)  200  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Mass (kg)  Motor part: 9.0  Number of Phases  Three-phase 
    from S$779.90
    Min. 2 days
  11. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Operation Ambient Temperature (℃)  -10~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1420(50)/1710(60)/1730(60)  Motor Current (A)  2.2(50)/1.93(60)/1.95(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Output (W)  400  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully enclosed outer fan  Specification  Indoor specification, with relief valve  Number of Phases  Three-phase 
    from S$1,499.00
    Min. 12 days
  12. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    Operation Ambient Temperature (℃)  -10~40  Maximum Liquid Temperature to Use (℃)  -5~80  Operating Temperature Range (℃)  -5~80  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1420(50)/1710(60)/1730(60)  Motor Current (A)  2.2(50)/1.93(60)/1.95(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Output (W)  400  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully enclosed outer fan  Specification  Indoor specification  Number of Phases  Three-phase 
    Rating:
    60%
    from S$1,399.00
    Min. 12 days
  13. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    The tricolloid pump is an inscribed gear type pump in which the outer gear (outer rotor) and the inner gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk with t... Read More
    Operation Ambient Temperature (℃)  -10~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Motor Current (A)  0.65(50)/0.60(60)/0.60(60)  Motor Output (W)  100  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1430(50)/1720(60)/1730(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Specification  Indoor specification  Mass (kg)  Motor part: 8.0  Number of Phases  Three-phase 
    from S$679.90
    Min. 3 days
  14. Motor Trochoid Pump
    Nippon Oil Pump Motor Trochoid Pump
    The tricolloid pump is an inscribed gear type pump in which the external gear (outer rotor) and the internal gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk ... Read More
    Operation Ambient Temperature (℃)  -10~40  Operating Temperature Range (℃)  -5~80  Maximum Liquid Temperature to Use (℃)  -5~80  Motor Current (A)  0.60(50)/0.55(60)/0.57(60)  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1390(50)/1660(60)/1690(60)  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Output (W)  75  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Mounting  Horizontal  Specification  Indoor specification  Mass (kg)  Motor part: 7.5  Number of Phases  Three-phase 
    from S$589.90
    Min. 9 days
  15. Motor trochoid pump
    Nippon Oil Pump Motor trochoid pump
    The tricolloid pump is an inscribed gear type pump in which the outer gear (outer rotor) and the inner gear (inner rotor) that fits inside it mesh with each other to rotate, and the tooth profile is formed by a trochoid curve. The trochoid pump consists of a circular case and an outer disk with t... Read More
    Operation Ambient Temperature (℃)  -10~40  Maximum Liquid Temperature to Use (℃)  -5~80  Operating Temperature Range (℃)  -5~80  Motor Current (A)  1.15(50)/1.10(60)/1.05(60)  Viscosity Range for Use (mm2/sec)  10~500  Motor Rotation Speed (min -1 [rpm])  1410(50)/1690(60)/1710(60)  Motor Output (W)  200  Motor Voltage (V)  200(50)/200(60)/220(60)  Voltage (V)  200/220  Motor Pole Number (P)  Motor Frequency (Hz)  50/60  Motor Type  Cage type induction motor  Motor Insulation Class / Type  Class E  Motor Rating  Continuous  Housing Structure  Fully closed type  Specification  Indoor specification  Mass (kg)  Motor part: 9.0  Number of Phases  Three-phase 
    from S$769.90
    Min. 16 days
  16. Gear pump (motor connected type)
    Kamejima Gear pump (motor connected type)
    The KA type is attached to the common motor base, and the base is a slide type that can attach large and small motors. It is a V-belt drive type. Transfer of oil types such as lubricating oil.
    Output (kW)  0.2  Maximum Pressure (MPa)  0.3  Regular Pressure (MPa)  0~0.2  Dimension G (Φmm)  12  Dimension I (mm)  15  Dimension H (mm)  20  Dimension BC (mm)  245  Dimension BN (mm)  275  Dimension E (mm)  35  Dimension BA (mm)  365  Rotational Speed (min -1 [rpm])  400  Dimension BM (mm)  488  Viscosity Range for Use (mm2/sec)  50~500  Dimension J (mm)  60  Maximum Operating Temperature (℃)  60  Material  Cast iron 
    from S$1,999.00
    Min. 6 days
  17. Orb mark motor
    Nippon Oil Pump Orb mark motor
    The adoption of tapered roller bearings that have been inherited from the past makes the structure strong not only against radial loads but also against thrust loads. * Operate at maximum pressure and maximum torque within 6 seconds. *Use clean oil equivalent to ISO VG32 as the recommended hydrau... Read More
    Maximum Liquid Temperature to Use (℃)  -5~80  Output Torque (Nm)  210  Maximum Output Torque (Nm)  246  Rated Flow (L/min)  57  Rated Rotation Speed (min -1 [rpm])  588  back pressure (MPa)  Mass (kg)  7.4  Maximum Flow Rate (L/min)  76  Theoretical Displacement (cm3/rev)  98.5  Flange  Bolt flange  Port  Rc1/2  Color  Red  Shaft Shape  Φ25 shaft + width 7 keys 
    from S$1,199.00
    Min. 28 days
  18. Gear rotary pump ME-1S (cast iron)
    Kamejima Gear rotary pump ME-1S (cast iron)
    Motor / engine connection type. It is a common base type for motors and engines with a metal stand. It is a compact design that does not require much effort to install. Forward and reverse rotation is possible. It is possible to handle various liquids by changing the specifications.
    Voltage (V)  Three-phase 200  Applicable Liquid  Oil and solvent  Motor Type  Fully enclosed external fan indoor type  Maximum Liquid Temperature to Use (℃)  60  Number of poles (P)  Type of Connection  Female screw  Discharge Pressure (MPa)  0.3  Material  Cast iron (standard) 
    Rating:
    100%
    from S$1,699.00
    Min. 12 days
  19. Gear rotary pump KA-1S (cast iron)
    Kamejima Gear rotary pump KA-1S (cast iron)
    Motor connection type. This type is based on the KA-1 type and has a motor set. It is a compact design that does not require much effort to install. Forward and reverse rotation is possible. It is possible to handle various liquids by changing the specifications.
    Discharge Pressure (MPa)  0.2 for regular use  Voltage (V)  Three-phase 200  Applicable Liquid  Oil and solvent  Number of poles (P)  Maximum Liquid Temperature to Use (℃)  60  Motor Type  Fully enclosed external fan indoor type  Type of Connection  Female screw  Material  Cast iron (standard) 
    from S$1,199.00
    Min. 7 days
  20. Gear rotary pump
    Kamejima Gear rotary pump
    Mainly used by setting on machines. All models use our original involute tooth type gear. Phosphor bronze oil-impregnated metal is used for the bearing and metal base, so smooth rotation and durability are outstanding.
    Diameter (B)  Mass (kg)  12.5  Diameter (A)  25  Pumping Capacity (L/min)  70-56  Pumping Rate (L/min)  70~56  Material  Cast iron 
    from S$849.90
    Min. 6 days
  21. Gear pump (no motor only)
    Kamejima Gear pump (no motor only)
    from S$1,999.00
    Min. 9 days
  22. NK gear pump (single base type)
    Kamejima NK gear pump (single base type)
    Single base type. The gear uses the manufacturer's unique involute tooth profile. The oil-impregnated phosphor bronze metal is used for the bearings and the metal base, ensuring smooth rotation and excellent durability. For transferring oils such as lubricating oil *Caution: Materials and spe... Read More
    Maximum Pressure (MPa)  0.5  Regular Pressure (MPa)  0~0.3  Discharge Rate (L/min)  105~139  Opening Diameter  11/2(40A)  Pumping Capacity (L/min)  139~105  Rotational Speed (min -1 [rpm])  300  Mass (kg)  34  Viscosity Range for Use (mm2/sec)  50~500  Operating Temperature (℃)  60 or less  Applicable Fluid Temperature (℃)  60 ° C or less  Trusco Part No.  850-9714  Material  Cast iron  Suitable Liquid  General mineral oil / solvent 
    from S$1,999.00
    Min. 2 days
  23. Gear rotary pump + ME-1SU ・ Ⅱ (stainless steel)
    Kamejima Gear rotary pump + ME-1SU ・ Ⅱ (stainless steel)
    Motor connection type. It is a large model of KA-1SU type. It is a compact design that does not require much effort to install. Forward and reverse rotation is possible. It has a structure that does not easily seize due to the use of PTFE parts.
    Rotational Speed (min -1 [rpm])  300  Number of poles (P)  Material  Body, all stainless steel  Motor Type  Fully enclosed external fan indoor type  Voltage (V)  Three-phase 200 
    from S$6,799.00
    Min. 13 days
  24. NK gear pump (with safety valve, motor connected type)
    Kamejima NK gear pump (with safety valve, motor connected type)
    For transferring oils such as lubricating oil *Caution: Materials and specifications are subject to change depending on the inhalant. * Separate fare depending on the area and conditions
    Maximum Pressure (MPa)  0.5  Regular Pressure (MPa)  0~0.3  Opening Diameter  11/4(32A)  Voltage (V)  200  Rotational Speed (min -1 [rpm])  350  Viscosity Range for Use (mm2/sec)  50~500  Operating Temperature (℃)  60 or less  Mass (kg)  61  Trusco Part No.  850-9726  Pumping Capacity (L/min)  99~75  Material  Cast iron 
    from S$3,899.00
    Min. 4 days
  25. Gear rotary pump ME-1V (cast iron)
    Kamejima Gear rotary pump ME-1V (cast iron)
    Single base type. The flow rate and durability are improved by attaching a metal stand. Phosphor bronze oil-impregnated and plain bearings are used for the bearings and metal bases. Forward and reverse rotation is possible. It is possible to handle various liquids by changing the specifications.
    Type of Connection  Female screw  Material  Cast iron (standard)  Discharge Pressure (MPa)  0.3  Maximum Liquid Temperature to Use (℃)  60  Applicable Liquid  Oil and solvent 
    from S$1,099.00
    Min. 13 days
  26. Gear rotary pump + KA-1U (stainless steel)
    Kamejima Gear rotary pump + KA-1U (stainless steel)
    only a main part. Widely used as a general-purpose all-stainless steel pump. The simple structure makes disassembly and cleaning easy. Forward and reverse rotation is possible. It has a structure that does not easily seize due to the use of PTFE parts.
    Maximum Pressure (MPa)  0.2  Rotational Speed (min -1 [rpm])  400  Material  Body, all stainless steel 
    from S$1,999.00
    Min. 13 days
  27. Gear rotary pump
    Kamejima Gear rotary pump
    Material  Cast iron  Other  V pulley is not attached 
    from S$779.90
    Min. 6 days
  28. Orb mark motor
    Nippon Oil Pump Orb mark motor
    from S$1,399.00
    Min. 18 days
  29. Gear pump (motor connected type)
    Kamejima Gear pump (motor connected type)
    The motor and engine are mounted on a common base, and the base is a sliding type that can be attached to both large and small motors. It is a V-belt drive type. Transfer of oil types such as lubricating oil. *The required horsepower varies depending on the pressure.
    Maximum Pressure (MPa)  0.5  Regular Pressure (MPa)  0~0.3  Mass (kg)  120  Discharge Rate (L/min)  164~218  Output (kW)  2.20  Voltage (V)  200  Opening Diameter  2” (50A)  Rotational Speed (min -1 [rpm])  300  Trusco Part No.  457-5741  Motor Frequency (Hz)  50・60  Viscosity Range for Use (mm2/sec)  50~500  Applicable Fluid Temperature (℃)  60 ° C or less  Material  Cast iron  Suitable Liquid  General mineral oil / solvent 
    from S$7,799.00
    Min. 4 days
  30. Gear rotary pump + KA-1SU (stainless steel)
    Kamejima Gear rotary pump + KA-1SU (stainless steel)
    Motor connection type. This type is based on the KA-1U type and has a motor set. It is a compact design that does not require much effort to install. Forward and reverse rotation is possible. It has a structure that does not easily seize due to the use of PTFE parts.
    Number of poles (P)  Rotational Speed (min -1 [rpm])  400  Material  Body, all stainless steel  Motor Type  Fully enclosed external fan indoor type  Voltage (V)  Three-phase 200 
    from S$3,299.00
    Min. 13 days
  31. Trochoid pump Small and medium capacity 2ME S (Single phase motor integrated type)
    Nippon Oil Pump Trochoid pump Small and medium capacity 2ME S (Single phase motor integrated type)
    A pump that takes in fluid between the external gear and internal gear and transfers the fluid by rotating the gear. It is a positive displacement pump and is self-priming, so no priming oil is required. Since it is an inscribed gear type pump, it is more compact than other pumps with the same ca... Read More
    Maximum Liquid Temperature to Use (℃)  -5~80  Rotational Speed (min -1 [rpm])  1500/1800  Number of poles (P)  Frequency (Hz)  50/60  Viscosity (mm 2 / s)  500  Type of Connection  Screwed  Voltage (V)  Single phase 100 
    Discontinued
  32. Trochoid pump 2MY-2HW (Three-phase motor integrated type)
    Nippon Oil Pump Trochoid pump 2MY-2HW (Three-phase motor integrated type)
    A pump that takes in fluid between the external gear and internal gear and transfers the fluid by rotating the gear. It is a positive displacement pump and is self-priming, so no priming oil is required. Since it is an inscribed gear type pump, it is more compact than other pumps with the same ca... Read More
    Maximum Liquid Temperature to Use (℃)  -5~80  Rotational Speed (min -1 [rpm])  1500/1800  Number of poles (P)  Frequency (Hz)  50/60  Viscosity (mm 2 / s)  500  Motor Type  Fully enclosed external fan indoor type  Type of Connection  Screwed  Voltage (V)  Three-phase 200 
    Discontinued
  33. Variable speed chemical resistant gear pump
    AS ONE Variable speed chemical resistant gear pump
    A compact, high-performance, versatile gear pump that uses engineering plastics. It is an integrated type with a speed controller and can be used immediately just by connecting it. It has self-priming ability, high discharge pressure, and stable liquid delivery without pulsation. Uses a highly re... Read More
    Maximum Discharge Pressure (MPa)  0.5  As ONE Part Number  1-8439-01  Voltage (V)  AC100  Power Supply  AC100V 50 / 60Hz 2P plug  Connection  R1 / 4 male screw 
    Discontinued
  34. NG type gear pump (low speed rotation)
    Gear-esu NG type gear pump (low speed rotation)
    Pressure (kg/cm2 (Discharge) 3  Material  Cast iron  Specification  With single pulley Without safety valve 
    Discontinued
  35. GL pump
    KOSHIN GL pump
    -Since it has a built-in bypass valve with a relief function, you can use it with confidence. -A fuel transfer pump that can be used from kerosene, light oil, heavy fuel oil A to machine oil and gear oil.・ This pump does not require priming oil. -Suitable for pushing up to high places and long-d... Read More
    Number of Poles 
    Discontinued
View : Grid List
Filter

35 Item(s)

Set Ascending Direction