Fittings / Pipe
Fittings and pipes are used in the fitting / pipe category. A joint is a part used for a joint to connect pipes together. By using joints, you can change the direction of piping, change the size of piping, and merge or branch pipes. In addition, there are various types of joints such as screw-in type and welded type. There are various types of materials such as cast iron, stainless steel, and resin.
Other Related Pages
- MonotaRO Screw bushing made of stainless steelA stainless steel fitting with excellent corrosion resistance. * Do not use for anything other than its intended purpose.Shape Bushing Type of Thread PT screw Material Stainless steel (SUS304)
- MonotaRO TS valve socketJIS K6743 (Hard PVC pipe fitting for water supply) * Please use TS fittings for joining VP pipes.Maximum Operating Pressure (MPa) 1 Material Rigid polyvinyl chloride Shape Socket
- MonotaRO TS socketJIS K6743 (Hard PVC pipe fitting for water supply) * Please use TS fittings for joining VP pipes.Maximum Operating Pressure (MPa) 1 Material Rigid polyvinyl chloride Shape Socket
- MonotaRO TS diameter socket* Please use TS fittings for joining VP pipes.Maximum Operating Pressure (MPa) 1 Material Rigid polyvinyl chloride Shape Socket
- ARON KASEI PVC Pipe VP 1mIt is a hard polyvinyl chloride pipe for water supply. For water supplyOperating Temperature Range (℃) +5~+35 Length (m) 1 Type PVC pipe Shape Pipe
- Kubota ChemiX (Former Kubota-C.I.) PVC Pipe for Water Supply 0.25MLength (m) 0.25 Standard JIS K 6742 Type PVC pipe Shape Pipe Material Rigid PVC (PVC) Outer Diameter Tolerance (mm) ±0.2
- ARON KASEI PVC Pipe HIVP 1mImpact resistant hard polyvinyl chloride pipe for water supply. For water supply that requires impact resistanceLength (m) 1 JIS Standard JIS K 6742 Type PVC pipe Shape Pipe
- No Brand Phosphorus deoxidized copper round tube coil (annealed copper tube) 20m longIt has excellent conductivity, corrosion resistance, bendability, deep drawing, weldability, and plating properties. Used for heat exchangers, chemical industry, water / hot water supply, and gas pipes.Melting Point (℃) 1083 Length (m) 20 Conductivity 70~90%IACS(20℃) Specific Gravity 8.94 Ingredient Copper / 99.9% or more
- ASOH Stainless steel conversion socketOperating Temperature Range (℃) -50~+150 Maximum Operating Pressure (MPa) 6.9 Material SUS304 Shape Socketfrom S$27.99Min. 2 days
- FUJI SPECIAL Sanitary Medium and High Pressure ClampEasy to install and remove. Metal fittings for fixing while connecting pipes.Material Stainless steel (SUS304)
- Benkan Kikoh Welded fitting (stainless steel) 45 ° long elbowShape Elbow 45 ° Type Welded pipe fitting Material SUS304W
- TOEI KANKI PP rainwater troutLightweight and easy to carry. For sewage / rainwater piping. * Please use for piping without pressure.Color Light blue Material PP Shape Round type
- Osaka Pipe Fitting & Valve Cast iron screw flange JIS FCD450 5K joint flange whiteSurface Treatment Hot-dip galvanizedfrom S$7.39Min. 2 days
- OSAKA SANITARY Ferrule reducer 316LShape Reducer Material SUS316L Type Sanitary fittings
- O.N. INDUSTRIES (ONK) Stainless steel (SUS304) threaded flangeNominal Pressure 10K RoHS directive (corresponding to 10 substances) Correspondence Shape Flange Material Stainless steel (SUS304) Type Threaded jointfrom S$53.99Min. 2 days
- SANKO MFG Flange joint FK-1 stainless steelOperating Pressure Range (MPa) 0.5 or less (normal temperature) Shape Flange Type Hose fittings Material Stainless steel (SUS304) Suitable Fluid Waterfrom S$63.99Min. 5 days
- ESCO PJ1 / 2 "xRc1 / 2" nipple (with check valve)Esco Part No. EA432RV-4 Shape Nipplefrom S$18.99Min. 2 days
- MAEZAWA KASEI INDUSTRIES Drainage special fitting + VU different diameter elbowChange the angle, diameter, and slope of the pipe. Transparent product.Shape Elbowfrom S$11.99Min. 5 days
- ARON KASEI 90 ° turn rainwater troutDimension L1 (mm) - Dimension L2 (mm) - Type Left and right type Slant Nonefrom S$64.99Min. 5 days
- Benkan Kikoh Welded fitting (white) 90 ° short elbowShape Elbow 90 ° Material PT370 Type White ・ SCH40from S$38.99Min. 4 days
- MIE Techno Stainless steel loose plate loose flange 10K ・ FFClass 10K Number of Bolt Holes 4 Shape Flange Material Stainless steel Type loosefrom S$24.99Min. 4 days
- ESCO 10mmx3 / 8inch pressure gauge unionHas excellent corrosion resistance and chemical resistance. Supports high temperature and high pressure. It can be used in all fields.Material SUS316 Mounting Screw 3/8inchPT Shape Union Esco Part No. EA425CN-103 Tube Outer Diameter (Φmm) 10from S$38.99Min. 4 days
- MIE Techno SUS304WD 90 ° short elbowShape 90 ° short elbow Type Butt welded pipe fittings Material stainless steelfrom S$58.99Min. 4 days
- MonotaRO Hose NippleFor fittings for hoses * Please refrain from using it for any other purpose. * Please use sealing tape when piping.Operating Pressure (MPa) 3 Material Brass Suitable Fluid Water, air, oil Shape hose nipple
- MonotaRO Threaded Hexagon Nipple Stainless SteelA stainless steel fitting with excellent corrosion resistance. * Do not use for anything other than its intended purpose.Shape Nipple Type of Thread PT screw Material Stainless steel (SUS304)
- MonotaRO Long Nipple Stainless SteelFor piping that allows fluids to pass through. * Please refrain from using it for any other purpose. * The printed stencil may be visible on the stainless steel pipe.Maximum Operating Pressure (MPa) 1 Shape Nipple Type of Thread PT screw Material Stainless steel (SUS304)
- ASOH Hose NippleMaximum Operating Pressure (MPa [kgf/cm 2 ]) 3.45[35] Material Brass Type Hose fittings Suitable Fluid Water, air, oil Shape hose nipple
- MonotaRO Threaded Hose Nipple Stainless Steel* Clean the threads and the inside of the piping to connect the product in advance. * For the sealing material of the screwed part, use a product suitable for the fluid and temperature to be used.Material Stainless steel (SUS304) Shape hose nipple Type of Thread PT screw Maximum Operating Pressure (MPa) 1
- MonotaRO Threaded Elbow Stainless SteelA stainless steel fitting with excellent corrosion resistance. * Do not use for anything other than its intended purpose.Shape Elbow Type of Thread PT screw Material Stainless steel (SUS304)
- MonotaRO Round Nipple White* Do not use for anything other than its intended purpose.Maximum Operating Pressure (MPa) 1 Standard JIS B2302 Shape Nipple Type of Thread PT screw
- MonotaRO Threaded Tee Stainless SteelA stainless steel fitting with excellent corrosion resistance. * Do not use for anything other than its intended purpose.Maximum Operating Pressure (MPa) 1 Type of Thread PT screw Material Stainless steel (SUS304) Shape Tee
- MonotaRO Round Pipe Nipple Stainless SteelFor piping that allows fluids to pass through. * Please refrain from using it for any other purpose.Maximum Operating Pressure (MPa) 1 Shape Nipple Type of Thread PT screw Material Stainless steel (SUS304)
- MonotaRO TS elbowJIS K6743 (Hard PVC pipe fitting for water supply) * Please use TS fittings for joining VP pipes.Maximum Operating Pressure (MPa) 1 Shape Elbow Material Rigid polyvinyl chloride
- MonotaRO Elbow Malleable Cast Iron Pipe Fitting WhiteA fitting with a beautiful casting surface that complies with JIS standards (B 2301 screw-in type malleable cast iron pipe fittings). The material is black core malleable cast iron. It has about twice the strength of ordinary cast iron and is as tough as cast iron. In addition, it is a strong and... Read MoreShape Elbow Standard JIS B2301 Material Malleable cast iron Type of Thread PT screw
- MonotaRO Tee Malleable Cast Iron Pipe Fittings WhiteA fitting with a beautiful casting surface that complies with JIS standards (B 2301 screw-in type malleable cast iron pipe fittings). The material is black core malleable cast iron. It has about twice the strength of ordinary cast iron and is as tough as cast iron. In addition, it is a strong and... Read MoreStandard JIS B2301 Material Malleable cast iron Type of Thread PT screw Shape Tee
- YODOSHI Nipple Malleable Cast Iron Pipe Fitting (White)Maximum Operating Pressure (MPa) 1 RoHS directive (corresponding to 10 substances) Correspondence Standard JIS B2301 Material Malleable cast iron Shape Nipple Type of Thread PT screw
Filter by categories