All Category

Bicycle Maintenance Tools

Maintenance tools include the tools you need to maintain and customize your bicycle yourself. There are various types of products, such as freewheel cassettes, hubs, axles, and crank / bottom brackets, so that you can choose according to your bike. There are also cleaners that can wash even small parts such as chains, and by taking care regularly, you can ride comfortably for a long time. Some basic tools are included in the set, so even beginners can easily purchase them.
View : Grid List
Filter

Items 1 - 40 of 1124

Set Ascending Direction
  1. Chain Cutter for Bicycle Use
    MonotaRO Chain Cutter for Bicycle Use
    It is small and lightweight, and very convenient to carry. For bicycle single chain * Cannot be used for HG / IG chains.
    Rating:
    79%
    from S$7.29
    Min. 2 days
  2. Wire cable & spoke cutter
    MonotaRO Wire cable & spoke cutter
    It can be used for cutting outer cables, inner cables, and spokes of bicycles. * Do not use for anything other than cutting cables and spokes.
    Cutting Capacity (mm)  (Wire rope) Φ4, (Stainless steel) Φ2 
    Rating:
    90%
    from S$19.99
    Min. 2 days
  3. Crank Tool
    MonotaRO Crank Tool
    A tool used to remove the crank from the crank shaft. Compatible with ISIS standard, Octalink standard (Shimano octalink), and square standard BB (square shaft). The 2192 is an 8mm hex wrench or 15mm spanner wrench, and the 2193 uses a 3/8 inch ratchet wrench to remove the crank. When pulling out... Read More
    Rating:
    87%
    from S$10.99
    Min. 2 days
  4. Chain Cutter for 6/7/8/9/10 Stages
    MonotaRO Chain Cutter for 6/7/8/9/10 Stages
    It is small and lightweight, and very convenient to carry. For bicycle multi-stage chain * Please do not use it for anything other than a bicycle chain. * Please pull after firmly fixing the chain. * Do not pull it forcibly.
    Suitable for  Shimano HG / UG / IG 
    Rating:
    79%
    from S$9.49
    Min. 2 days
  5. Freewheel Remover for Shimano Boss Type
    MonotaRO Freewheel Remover for Shimano Boss Type
    A tool for removing Shimano boss type (non-cassette sprocket type) sprockets. Attaching and detaching Shimano sprockets and center lock disc rotors * A separate 24mm spanner wrench is required for use. * Cannot be used with Shimano HG sprockets (cassette sprockets).
    Rating:
    96%
    from S$5.79
    Min. 2 days
  6. Pedal wrench
    MonotaRO Pedal wrench
    It is a very convenient product that integrates 15 mm that can be used for pedal replacement and rear wheel hubs and 14 mm that can be used for front wheel hubs. The tip on one side is bent at 90 ° so that it is easy to apply force and can be turned strongly. Since the thick and thin mouths are i... Read More
    Thickness (mm)  (Thin side) 4.5, (Thick side) 6.0  Suitable Size (mm)  14/15  Overall Length (mm)  308  Maximum Torque (Nm)  60  Mass (g)  About 280  Material (Main Unit)  Carbon tool steel (whole body quenching) 
    Rating:
    91%
    from S$15.99
    Min. 2 days
  7. Lock ring spanner wrench
    MonotaRO Lock ring spanner wrench
    A spanner that removes lock rings such as bottom brackets, headsets, and suspensions. * Please do not use it for anything other than a spanner.
    Suitable for  Φ40-46  Overall Length (mm)  190 
    Rating:
    81%
    from S$9.49
    Min. 2 days
  8. Ball
    Nakatani Kinzoku Kogyo Ball
    Color  Silver  Material  Steel 
    Rating:
    94%
    from S$5.59
    Min. 2 days
  9. Tap Handle
    HOZAN (HOZAN TOOL INDUSTRIAL) Tap Handle
    For stable screwing work. * Please wear protective goggles when working. It cannot be used for C-401, C-401B, C-402.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  10. 4 size wrench Stepped
    MonotaRO 4 size wrench Stepped
    A dedicated spanner for hub ball pushers and lock nuts. * Please do not use it for anything other than a spanner.
    Thickness (mm)  2 (tip)  Overall Length (mm)  200  Suitable for  13mm、14mm/15mm、16mm 
    Rating:
    80%
    from S$7.39
    Min. 2 days
  11. Freewheel Remover Shimano for HG Type with Guide Pin
    MonotaRO Freewheel Remover Shimano for HG Type with Guide Pin
    A tool for removing Shimano's HG sprocket (cassette sprocket) and disc brake lock ring. With a guide pin that prevents the remover body from falling out of the lock ring during work and enables safe work. Detachment of cassette sprocket and center lock disc rotor * A separate 24mm spanner wre... Read More
    Rating:
    93%
    from S$9.59
    Min. 2 days
  12. 8 way Multi Spanner for Bicycle
    MonotaRO 8 way Multi Spanner for Bicycle
    This one corresponds to 8 sizes that are frequently used. It has a carbon tool steel, quenching treatment, and chrome plating finish that even professionals are satisfied with. Since it is thin (about 2.85 mm), it is possible to work even with a small gap. It can be used for various purposes as w... Read More
    Suitable for  10mm、11mm、12mm、13mm、14mm、15mm、22mm、32mm  Overall Length (mm)  145  Thickness (mm)  About 2.85 
    Rating:
    56%
    from S$3.19
    Min. 2 days
  13. Evers bicycle washing cleaner
    EVERS Evers bicycle washing cleaner
    You can wash the car without using water (no need to wash it with water, just wipe it off). Cleans the frame, tires, wheels, handles, saddles, chains, derailleurs, brakes, forks, etc. A convenient foam cleaner with excellent workability that can gently clean painted surfaces, rubber, metal, resin... Read More
    Rating:
    100%
    from S$15.99
    Min. 2 days
  14. 5R / 5U / 5T / 5S cotterless hanger shaft
    Nakatani Kinzoku Kogyo 5R / 5U / 5T / 5S cotterless hanger shaft
    Cell Spacing (mm)  55 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  15. Chain cleaner (with 2 chemicals)
    BARBIERI Chain cleaner (with 2 chemicals)
    Chain cleaning is super easy, just set this product and rotate the crank, and the special mechanism will make the inside of the chain shiny. Patented rotating brush & scraper. The included bio-degreaser is biodegradable, has excellent cleaning power, and is kind to nature. A high quality chai... Read More
    Mass (g)  160  Dimension (mm)  2800×135×35 
    Rating:
    97%
    from S$47.99
    Min. 2 days
  16. Dummy hub
    Park Tool Dummy hub
    A convenient dummy hub that prevents the chain from inadvertently playing when cleaning and maintaining the drive train such as the chain, or when transporting the bicycle with the rear wheels removed. The derailleur can be moved with the dummy hub attached, making it ideal for chain cleaning and... Read More
    Rating:
    100%
    from S$43.99
    Min. 2 days
  17. HUB CONE WRENCH Set
    HOZAN (HOZAN TOOL INDUSTRIAL) HUB CONE WRENCH Set
    A dedicated wrench for hub ball pushers and lock nuts. The open jaw that makes it easy to catch the hub axle and the handle shape that fits your hand and makes fine adjustments make it possible to work quickly and accurately.
    Blade Thickness (mm)  2.0  Set Contents  13/14/15/17mm  Mass (g)  320 (4) 
    Rating:
    85%
    from S$45.99
    Min. 2 days
  18. Back expansion
    HOZAN (HOZAN TOOL INDUSTRIAL) Back expansion
    It is a tool that temporarily expands the frame, such as removing the hub stuck to the frame and replacing the tires and tubes with the wheels attached to the frame. Since the attachment moves according to the angle of the frame, it will not slip or be scratched even with a steep frame. Since the... Read More
    Mass (g)  880  Maximum Width (mm)  (Open) 160 / (Close) 80  Overall Length (mm)  305~405 
    Rating:
    60%
    from S$139.90
    Min. 2 days
  19. Pedal wrench head
    Park Tool Pedal wrench head
    Torque wrench head for managing the tightening torque of the pedal mounting shaft. By installing it at 90 degrees to the shaft of the torque wrench, it can be used with almost no conversion of torque value.
    Wall Thickness (mm)  Square Drive (mm)  9.5(3/8sq.) 
    from S$28.99
    Min. 7 days
  20. Professional Chain Cleaner
    Park Tool Professional Chain Cleaner
    Chain cleaner for pro shops. The body and handle are made of sturdy aluminum die-cast. Cleans all four sides of the chain quickly and thoroughly. High maintainability is ensured by adopting a cartridge type brush and sponge.
    from S$219.90
    Min. 7 days
  21. Clutch wrench
    Park Tool Clutch wrench
    A wrench for adjusting the strength of the clutch part of "Shimano Shadow Derailleur Plus" used in Shimano's MTB components derailleur. It has 5.5mm and 3mm mouths on a thin metal plate, making it easy to work with.
    Tip Width (mm)  5.5×3  Overall Length (mm)  70 
    from S$13.99
    Min. 7 days
  22. Bike tool display set (6 colors)
    PB SWISS TOOLS Bike tool display set (6 colors)
    A display stand set that is ideal for display in stores.
    Mass (g)  1256 
    from S$999.00
    Min. 5 days
  23. BB facing tool New
    UNIOR BB facing tool New
    from S$589.90
    Min. 6 days
  24. Spoke turning quenching type
    MonotaRO Spoke turning quenching type
    It can be used not only for general cars but also for sports cars. We use hardened carbon steel as the material. A special tool for turning the spokes when assembling or swinging the rim. * Please do not use it for any purpose other than its intended purpose. * The appearance and the position of ... Read More
    Height (mm)  12  Material  Carbon steel (quenched)  Diameter (Φmm)  40  Suitable for  9/10/11/12/13/14/15 / 15G (nipple) 
    Rating:
    89%
    from S$3.99
    Min. 2 days
  25. Cartridge Bottom Bracket Tool
    MonotaRO Cartridge Bottom Bracket Tool
    A tool for attaching (removing) a cartridge-shaped bottom bracket. Shimano cartridge, cartridge BB tool for ISIS. *A separate 32mm wrench is required to use 40966572. Also, 40966581 requires a separate 24mm spanner wrench or 1/2 inch ratchet wrench.
    Rating:
    90%
    from S$11.99
    Min. 2 days
  26. Taper Reamer
    HOZAN (HOZAN TOOL INDUSTRIAL) Taper Reamer
    It is convenient for deburring the inside of the pipe and enlarging the hole. For repairing and enlarging holes in metal plates. Outstanding sharpness and durability. Ideal for repairing and enlarging holes in aluminum plates, thin iron plates, etc. * Please wear protective goggles when working.
    RoHS directive (corresponding to 10 substances) 
    Rating:
    94%
    from S$13.99
    Min. 2 days
  27. Tire lever
    Panaracer Tire lever
    A tire lever that tire specialists pursued ease of use. Contains 3 tire levers.
    Overall Length (mm)  About 115  Mass (g)  About 40 
    Rating:
    92%
    from S$8.99
    Min. 2 days
  28. Hanger retainer 1/4
    Nakatani Kinzoku Kogyo Hanger retainer 1/4
    * 2 pieces 1 set * The number of balls is 11 or 9. You cannot choose the number of balls.
    Color  Silver 
    Rating:
    94%
    from S$4.99
    Min. 2 days
  29. Sprocket remover
    BIKEHAND Sprocket remover
    Low price and high quality products. Securely holds the sprocket. For multiple stages (6 to 11 stages) * Do not use for any purpose other than bicycle maintenance.
    Mass (g)  About 300  Material  Steel / TPR  Overall Length (mm)  290  Suitable for  6-11 steps 
    Rating:
    92%
    from S$19.99
    Min. 2 days
  30. HUB CONE WRENCH
    MonotaRO HUB CONE WRENCH
    It is used when installing and adjusting the bearing ball pushers on the hub, and when grease-up the hub. * Do not use for anything other than its intended purpose.
    Blade Thickness (mm)  Overall Length (mm)  215 
    Rating:
    94%
    from S$5.39
    Min. 2 days
  31. Sprocket Removal Tool for Single Chain
    MonotaRO Sprocket Removal Tool for Single Chain
    A tool for fixing the cassette sprocket so that it does not rotate freely when it is removed from the wheel. For multi-stage (8-speed or less) cassette sprockets. * Do not use for anything other than its intended purpose. * It is possible to hang it on the outermost side of the multi-stage type (... Read More
    Suitable for  Single chain  Mass (g)  226  Overall Length (mm)  280 
    Rating:
    83%
    from S$13.99
    Min. 2 days
  32. Wire Cutter
    HOZAN (HOZAN TOOL INDUSTRIAL) Wire Cutter
    Highly durable wire cutter. A wire cutter that can be used to cut the inner and outer wires of brakes and shifters, and to cut spokes for bicycles.
    Mass (g)  335  Overall Length (mm)  200 
    Rating:
    98%
    from S$39.99
    Min. 2 days
  33. Master Link Pliers Detachable Type
    MonotaRO Master Link Pliers Detachable Type
    The chain connector of 8 to 11 steps can be attached and detached. For attaching and detaching the chain connector. * Do not use for any other purpose.
    Length (mm)  150  Blade Thickness (mm)  Material (Main Unit)  Body: Steel grip: TPR  Opening Size (mm)  Up to 24
    At least 14 
    Rating:
    86%
    from S$11.99
    Min. 2 days
  34. Chain puller
    MonotaRO Chain puller
    Used when connecting chains. You can hold the chain before installing the joint. For chain connection * Do not use for any other purpose.
    Chain No.  35~60 
    Rating:
    97%
    from S$35.99
    Min. 2 days
  35. Cotterless Crank Tool
    SHIMANO Cotterless Crank Tool
    Used for pulling out and tightening cotterless cranks. * Oriental links cannot be used. * For octalink cranks (BB), use TL-FC15 as an adapter.
    Genuine Part No.  Y13009010 
    Rating:
    97%
    from S$25.99
    Min. 2 days
  36. Bottom bracket cup tool
    Ice Toolz Bottom bracket cup tool
    Since the head moves, the pin spacing can be adjusted, making it highly versatile. Pin spanner for hanger one, crank bolt, suspension, etc.
    Overall Length (mm)  About 160 
    Rating:
    64%
    from S$15.99
    Min. 2 days
  37. Chain pulling bracket for 3S
    Tokyo Seibyo Chain pulling bracket for 3S
    Type  For 3S (general vehicles / three-speed)  Color  Silver 
    Rating:
    84%
    from S$1.89
    Min. 2 days
  38. For hanger one tool groove type (6 jaws type)
    Maeda Kiko For hanger one tool groove type (6 jaws type)
    Type  6-jaw type for groove type 
    Rating:
    83%
    from S$57.99
    Min. 2 days
  39. Freewheel Remover for Shimano HG Type
    MonotaRO Freewheel Remover for Shimano HG Type
    A tool for removing Shimano's HG sprocket (cassette sprocket) and disc brake lock ring. Detachment of cassette sprocket and center lock disc rotor * A separate 24 mm or 19 mm spanner wrench or 1/2 inch ratchet wrench is required for use. * Cannot be used for boss type.
    Rating:
    83%
    from S$9.49
    Min. 2 days
  40. Chain pliers
    HOZAN (HOZAN TOOL INDUSTRIAL) Chain pliers
    RoHS directive (corresponding to 10 substances)  Mass (g)  150  Overall Length (mm)  165  Trusco Part No.  469-9947  Material  Body: Tool steel, Grip: Elastomer  Suitable for  Roller chain (clip type) 
    Rating:
    100%
    from S$31.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1124

Set Ascending Direction