Drink Holders

A simple model of a cage for PET bottles containing 500 mL. A simplified version of a 500mL PET bottle that can be easily obtained at convenience stores and a holder for small-capacity bottles of the same diameter. It can be easily attached and detached with one hand because it has a structure th... Read More

PET bottle cage Two just-fit mounting bolts are included with the 500mL PET bottle

This bottle cage is a handmade product made by bending a slender stainless steel wire. The traditional style that shines in silver is perfect for slender bicycles. Since it is made of stainless steel, it does not rust and is slender yet strong enough.

Bottle cage holder that can be attached and detached with a single touch using a quick clamp A gear tooth mechanism is provided inside the holder, and the mounting angle is set every 12 degrees. There are two types of BH-100 with different clamp compatible diameters. "BH-100S" (side log... Read More

Easy installation with a single screwdriver. Contains thick cans, thin cans, and 500 ml PET bottles (corners and rounds).

Aluminum bottle cage

A bottle cage that allows you to adjust the bottle size according to the bottle you are using by simply turning the dial on the back. Bicycle racer bottles to slim type PET bottles can also be used (recommended by the manufacturer: compatible with bottles from Φ60mm to 73mm) Uses durable polycarb... Read More

Attached to a place where you can easily pick up a beverage bottle. Easy to install on all bicycles (sports cars, general cars, small wheel bikes, etc.) Can be mounted anywhere on the frame or on the seatpost (up to 54mm diameter can be mounted) * The product is a holder only. Bottle gauge is not... Read More

A set of a holder and a PET bottle gauge. Since it is attached with Velcro, it can be attached to a seat post anywhere on a sports bicycle or frame without dowel holes. Of course, it can also be installed on moms. It can be attached to the legs of a PC rack or desk, so you can use it widely aroun... Read More

Bottle cage holder that attaches to the rear of the saddle (seat rail), which is less likely to cause air resistance * Since the seat rail may be scratched when installing, it is recommended to protect the rail side with vinyl tape etc. in advance.

A bicycle cup holder whose size can be adjusted according to the diameter of the cup. Since the diameter can be adjusted up to about 250 mm, big size cups such as Starbucks Venti can be installed without problems. No tools required for installation. Since the mounting bracket and holder (ring) ca... Read More

Easy installation with a single screwdriver. Contains thick cans, thin cans, 500 ml PET bottles (corners / rounds), paper packs (large / small), and cups.

A holder for adding two spare bottles on the side rails (behind the saddle). Attach the saddle rail by sandwiching it between the main body and the plate bracket. The rear of the saddle, which is less prone to air resistance, is an advantageous position for high-speed competitions such as roads a... Read More

A colorful and light bottle cage with a stylish design. ◎ For racer bottles * Some bottles cannot be attached, so please check the shape of the bottle carefully before purchasing. * Only pink has a different graphic design.

Since the bottle cage can be kept 35 mm offset from the center offset type clamp that can place the bottle in the center of the handle, the bottle can be positioned directly in front of the stem just by clamping the side of the stem. Hold the bottle cage. The plate uses a rust-resistant stainless... Read More

Soft type drink holder Can be installed without tools Can be used in 500ml PET bottles.

Bottle cage for PET bottles (350-500ml). You can adjust the angle by about 20 degrees to the left and right. With handle mounting pedestal.

6-color resin bottle cage. Resin drink bottle cage.

Light, supple, tough and durable duralumin bottle cage 2017 series duralumin "Dura Cage" Dedicated design for bicycle poly bottles (diameter 73 mm) Mainly for users who place importance on lightness and ease of putting in and out of bottles Dura-Cage is for bicycle poly bottles (diamete... Read More

A dedicated bottle gauge for carrying a bicycle poly bottle (Φ73 mm). 2017 series duralumin, which is also used as a material for aircraft, is used (the gauge round bar used is manufactured exclusively by Kobe Steel for Minoura), and the wire diameter is slightly smaller than that of bottle gauge... Read More

Made of Injected Nylon Fiberglass Made of high-strength resin Injected Nylon Fiberglass The unique shape holds the bottle firmly while being lightweight.

Aero drink system parts kit

AXIS Bottle Cage

A bottle cage prepared to carry a 1 liter Nalgene bottle, which is loved by many backpackers and campers around the world, on a bicycle. It made it possible to carry the water necessary for long riding. Since the pedestal hole can be slid 10mm, it can be attached to many frames. Recommended for a... Read More

Made of cycling bottle cage nylon material, it is lightweight, flexible, shock-resistant and does not deteriorate even at low temperatures.

A resin bottle cage that allows you to select "right-out" or "left-out". Left and right conversion is a simple setting that just replaces the parts at the bottom of the main unit.

To attach a bottle cage to the handle. A bracket that allows you to attach a commercially available bottle cage to the handle.

PET bottle and bottle combined type A resin cage ideal for storing PET bottles and drink bottles.

It is possible to tighten the mouth with a string. The worry that the contents will pop out even with an impact while driving is reduced.

You can choose your favorite color according to the bicycle because there are abundant color variations. Made of lightweight and durable duralumin Recommended for those who value lightness and ease of putting in and out.

Only for FC25 and FC35. * Please use the "Aero Drink Mount Bracket" when fixing to the aero bar and the "Aero Drink Base Bar Bracket" when fixing to the handlebar. (Sold separately)

Injected Nylon Fiberglass Injected Nylon Fiberglass, lightweight and durable bottle cage. Reversible design that allows you to access the bottle from either the left or right by rearranging the parts.