Bicycle Fenders
A fender (mudguard) is a mudguard that covers the bicycle wheel and covers it. By attaching a fender, it is possible to prevent rain from splashing on the tires on rainy days. It can also be worn as part of a dress up as a decoration on a bicycle. Some fenders can be easily removed, so you can attach the fender only when you need it. In addition, there is a fender that is designed to be lightweight, so you can reduce the weight of your bicycle.
Other Related Pages
Asami U-type mudguard stay* Stay only. Fender is not attached.Included Accessories Mounting bracket Set Contents 1 pair before and after Color Stainless steel- Shikishima Stainless steel mudguard (no stay)* The set includes only before and after the mudguard. Stays are sold separately.Material Stainless steel Color Stainless steel
- FLINGER Mudguard 119 frontEasy assembly and installation without tools Can be attached to the down tube of most bicycles lightweight Road bikes, mountain bikes, cross bikes, etc. are generally not equipped with a mudguard at the time of purchase, as we do not wear anything that is not necessary for driving as much as poss... Read MoreMass (g) 70 Mounting Diameter (Φmm) Approx. 28 x Approx. 90 Applicable tire size 20-29 inch
- ASS SAVERS ASS SAVERS BIGASS SAVERS BIG is 4 cm longer than the previous ORIGINAL and 1 cm longer than EXTENDED, improving the effect of preventing mud splashing. (It has been renewed and can be attached to most saddles. However, it may not be possible to attach it due to the use of the saddle bag. Please note.) A simple... Read Morefrom S$23.99Min. 9 days
- ASS SAVERS ASS SAVERS FENDOR BENDOR SLIMIt is a fender that can be easily attached to the seat post or seat tube. (When installing the seat tube, the brake may not be installed due to obstruction. Please note.) Water splashes that could not be covered by the ASS SAVERS original have also been greatly improved. It can be folded in three... Read MoreMass (g) 48from S$37.99Min. 9 days
- ASS SAVERS FENDOR BENDOR-4 REGULARIntroducing a new fender from the FENDOR BENDOR series of ASS SAVERS It is a fender that can be easily attached to the seat post or seat tube. (When installing the seat tube, the brake may not be installed due to obstruction. Please note.) Water splashes that could not be covered by ASS SAVERS Re... Read MoreColor Black Mass (g) 50from S$47.99Min. 7 days
- ASS SAVERS FENDOR BENDOR-4 BIGIntroducing a new fender from the FENDOR BENDOR series of ASS SAVERS It is a fender that can be easily attached to the seat post or seat tube. (When installing the seat tube, the brake may not be installed due to obstruction. Please note.) Water splashes that could not be covered by ASS SAVERS Re... Read MoreColor Black Mass (g) 61from S$49.99Min. 8 days
- Shikishima Front and rear mudguard (no stay)* The set includes only before and after the mudguard. Stays are sold separately.Material Steel Color Silver
- FLINGER Road / cross bike fenderA slim type fender that is ideal for road bikes and cross bikes and can be easily removed. The smart and lightweight design makes it easy to design and easy to carry. Since the stay cover is attached, safety and appearance will not be impaired even after removing the fender. There are two colors,... Read MoreIncluded Accessories Mounting bracket Material Resin Mass (g) 250
- FLINGER Infant car fenderA fender for infant cars that is ideal for repairs. It has a wide range of designs to effectively prevent splashing of water and mud. Bicycle mudguardSuitable Size 12-18 inches (tire width / 1.75 inches)
- FLINGER MTB PC Full FenderA full type fender ideal for 26 inch MTB. Compared to the conventional model (compared to SW-816FR), the width of the fender has increased by 10 mm. The main body is made of polycarbonate that is resistant to impact and distortion, and the V-shaped stay that can be firmly fixed is made of stainle... Read MoreIncluded Accessories V-type stay, POP OFF Set Contents 1 pair before and after Material Resin / stainless steel Mass (g) 500 Suitable Size Up to 26 x 2.125
- FLINGER Fender bracketRepair bracketIncluded Accessories Fixing screw Material Resin Color Black
- FLINGER 700C PC Full FenderIncluded Accessories V-type stay, POP OFF Set Contents 1 pair before and after Material Resin / stainless steel Mass (g) 440 Suitable Size Up to 700C x 32
- FLINGER Small car fenderIt is a fender for small wheel bikes that is easy to remove. The smart and lightweight design makes it easy to design and easy to carry. Since the stay cover is attached, safety and appearance will not be impaired even after removing the fender. There are two colors, black and black / silver LINE... Read MoreIncluded Accessories Mounting bracket Set Contents 1 pair before and after Material Resin Mass (g) 200
- Asami U-type mudguard stay (for 20 inch)For 20 inches * 1 pair (front, rear)Included Accessories Mounting bracket Material Stainless steel
- CAPTAIN STAG Aero fender setFender set for suspension and V-brake. It can be easily installed with two bolts. The rear fender can be attached to either the seat post or stay. The angle of the rear fender can be adjusted.Mass (g) 240
- Asami U-type mudguard stay (for 24-inch)For 24 inches * 1 pair (front, rear)Included Accessories Mounting bracket Material Stainless steel
- OGK Rear fenderRear fender that is easy to put on and take off. The mudguard is a long type with a length of 460 mm, and the effect is outstanding.Mounting Diameter (Φmm) Seatpost 25.4-31.6
- Sunny Wheel PC full fender for small-diameter carsFull type fender width of about 50mm, which is ideal for 20-inch small wheel bikes, wide size The main body is made of polycarbonate that is resistant to impact and distortion, and the V-shaped stay that can be firmly fixed is made of rust-resistant stainless steel. A bracket "POP OFF" ... Read MoreIncluded Accessories V-type stay, POP OFF Material Resin, stainless steel Color Black Mass (g) 365 Suitable Size For 20 inch
- FLINGER Small-Diameter Bicycle PC Full FenderA full-type fender ideal for 20-inch small wheel bikes. It is a wide size with a width of about 50 mm. The main body is made of polycarbonate that is resistant to impact and distortion, and the V-shaped stay that can be firmly fixed is made of stainless steel that is resistant to rust. It also co... Read MoreIncluded Accessories V-type stay, POP OFF Set Contents 1 pair before and after Material Resin / stainless steel Color Silver Mass (g) 365 Suitable Size Up to 20 × 1.75
- OGK CTB fenderCompatible with horseshoe locks Compatible with junior mountain bikes. Bicycle mudguardIncluded Accessories Mounting bracket
-
- ASS SAVERS ASS SAVERS REGULARASS SAVERS REGULAR is 4 cm longer than the previous ORIGINAL and 1 cm longer than EXTENDED, improving the effect of preventing mud splashing. (It has been renewed and can be attached to most saddles. However, it may not be possible to attach it due to the use of the saddle bag. Please note.) A si... Read Morefrom S$19.99Min. 8 days
-
-
- Veloline Telescopic front and rear fendersMass (g) Approx. 240 (excluding screws)
- Zefal DEFLECTOR C50 Front and rear fender set <26 "& 28"> (Black)Applicable tire size 26&28from S$36.99Min. 4 days
- DIA-COMPE ENE fender stay adapterAn adapter for attaching fenders to frames such as road bikes and track frames that do not have carrier dowels at the end.Material Steelfrom S$12.99Min. 10 days
- OGK Long & wide ATB fenderIt is a fender that emphasizes functionality and design, capturing "Ima" now that the city use of high-class ATB is increasing. The long and wide design improves the effect of preventing mud splashing! A design that incorporates a rich taste that responds to the sensibilities of adults.... Read MoreSuitable Outer Diameter (Φmm) (Seat tube and seat post) 22-35 Type of Terminal Fitting Front / fork crown, rear / seat post
- FLINGER Sliding rear fenderA sliding rear fender that can be easily attached to the seat post. By storing the slide part, it is compactly organized, and when not in use, it can be carried in the attached pouch. It can be securely attached to the seatpost with a single touch using the band and quick lever. The reflective ta... Read MoreIncluded Accessories Dedicated storage pouch Material Resin Color Black Mass (g) 160from S$67.99Min. 7 days
- FLINGER PC short fender for 700CA short type fender that is ideal for 700C bikes. Compared to the conventional model (compared to SW-819FR), the width of the fender has increased by 10 mm. The body is made of polycarbonate, which is resistant to impact and distortion, and the stay is made of stainless steel, which is resistant ... Read MoreIncluded Accessories RUBBER BAND、POP OFF Set Contents 1 pair before and after Material Resin / stainless steel Mass (g) 360 Suitable Size Up to 700C x 32
- Zefal PARAGON C50 Front and rear fender set <700C & 28 "/ 52mm> (black)Resin front and rear fender setApplicable tire size 700C & 28 inchesfrom S$77.99Min. 4 days
-
- ASS SAVERS ASS SAVERS MUDDER FRONT FENDERFront fender for MTB. (Nylon band is required for installation.) (Nylon band is not included.) 100% recycled material (polypropylene material)Specification Lightweight design Mass (g) 18from S$25.99Min. 9 days
-
- FLINGER Sliding rear fender (seat rail mounting type)A sliding rear fender that can be easily attached and detached with the seat rail bracket. By storing the slide part, it is compact and convenient to carry. The reflective tape on the side is also useful for running in the dark. You can also adjust the angle of the main body without tools. Bicycl... Read MoreMaterial Resin Color Blackfrom S$85.99Min. 7 days
- Zefal DEFLECTOR FC50 front fender <26 "& 28" / 80mm> (black)Applicable tire size 26&28from S$15.99Min. 4 days
- Zefal DEFLECTOR M60 Front / Rear Fender Set <MTB 26 "/27.5"> (Black)Applicable tire size 26・27.5
-
- FLINGER RUBBER BAND (Replacement band for PC short fender)It is a band for fixing the PC short fender. (Rubber bond for repair) You can freely choose the mounting position. For SW-8XX series PC short fendersMaterial Resin Color Black Mass (g) 50from S$7.99Min. 7 days
